Vulnerabilities (CVE)

A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit cou ... A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit could allow the attacker to log in to the CSPC using the default account. For Cisco CSPC 2.7.x, Cisco fixed this vulnerability in Release 2.7.4.6. For Cisco CSPC 2.8.x, Cisco fixed this vulnerability in Release 2.8.1.2.

Show More

A vulnerability in the management web interface of Cisco Network Assurance Engine (NAE) could allow an unauthenticated, local attacker to gain unauthorized access or cause a Denial of Service (DoS) condition on the server. The vulnerability is due to a fault in the password management system of NAE. An attacker could exploit this vulnerability by authenticating with the default administrator password via the CLI of an affected server. A successful exploit could allow the attacker to view potenti ... A vulnerability in the management web interface of Cisco Network Assurance Engine (NAE) could allow an unauthenticated, local attacker to gain unauthorized access or cause a Denial of Service (DoS) condition on the server. The vulnerability is due to a fault in the password management system of NAE. An attacker could exploit this vulnerability by authenticating with the default administrator password via the CLI of an affected server. A successful exploit could allow the attacker to view potentially sensitive information or bring the server down, causing a DoS condition. This vulnerability affects Cisco Network Assurance Engine (NAE) Release 3.0(1). The default password condition only affects new installations of Release 3.0(1).

Show More

A vulnerability in the default configuration of the Cisco Aironet Active Sensor could allow an unauthenticated, remote attacker to restart the sensor. The vulnerability is due to a default local account with a static password. The account has privileges only to reboot the device. An attacker could exploit this vulnerability by guessing the account name and password to access the CLI. A successful exploit could allow the attacker to reboot the device repeatedly, creating a denial of service (DoS) ... A vulnerability in the default configuration of the Cisco Aironet Active Sensor could allow an unauthenticated, remote attacker to restart the sensor. The vulnerability is due to a default local account with a static password. The account has privileges only to reboot the device. An attacker could exploit this vulnerability by guessing the account name and password to access the CLI. A successful exploit could allow the attacker to reboot the device repeatedly, creating a denial of service (DoS) condition. It is not possible to change the configuration or view sensitive data with this account. Versions prior to DNAC1.2.8 are affected.

Show More

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain admin ... A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Show More

FreeSWITCH 1.6.10 through 1.10.1 has a default password in event_socket.conf.xml.

An authentication weakness in the SNMP service in B&R Automation Runtime versions 2.96, 3.00, 3.01, 3.06 to 3.10, 4.00 to 4.63, 4.72 and above allows unauthenticated users to modify the configuration of B&R products via SNMP.

Jalios JCMS 10 allows attackers to access any part of the website and the WebDAV server with administrative privileges via a backdoor account, by using any username and the hardcoded dev password.

An issue was discovered in TitanHQ WebTitan before 5.18. It has a hidden support account (with a hard-coded password) in the web administration interface, with administrator privileges. Anybody can log in with this account.

An issue was discovered in TitanHQ WebTitan before 5.18. The appliance has a hard-coded root password set during installation. An attacker could utilize this to gain root privileges on the system.

Barco ClickShare Button R9861500D01 devices before 1.9.0 allow Information Exposure. The encrypted ClickShare Button firmware contains the private key of a test device-certificate.

Use of hard-coded cryptographic key vulnerability in August Connect Wi-Fi Bridge App, Connect Firmware allows an attacker to decrypt an intercepted payload containing the Wi-Fi network authentication credentials. This issue affects: August Connect Wi-Fi Bridge App version v10.11.0 and prior versions on Android. August Connect Firmware version 2.2.12 and prior versions.

Use of default credentials for the TELNET server in Petwant PF-103 firmware 4.3.2.50 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

Western Digital WD My Book World through II 1.02.12 suffers from Broken Authentication, which allows an attacker to access the /admin/ directory without credentials. An attacker can easily enable SSH from /admin/system_advanced.php?lang=en and login with the default root password welc0me.

ifw8 Router ROM v4.31 allows credential disclosure by reading the action/usermanager.htm HTML source code.

Brocade SANnav versions before v2.0 use a hard-coded password, which could allow local authenticated attackers to access a back-end database and gain privileges.

A hard-coded password vulnerability in the Fortinet FortiSIEM database component version 5.2.5 and below may allow attackers to access the device database via the use of static credentials.

Use of a hard-coded cryptographic key to encrypt security sensitive data in local storage and configuration in FortiClient for Windows prior to 6.4.0 may allow an attacker with access to the local storage or the configuration backup file to decrypt the sensitive data via knowledge of the hard-coded key.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The slick-popup plugin before 1.7.2 for WordPress has a hardcoded OmakPass13# password for the slickpopupteam account, after a Subscriber calls a certain AJAX action.

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware hashes and encrypts passwords using a hardcoded cryptographic key in sal_util_str_encrypt() in libsal.so.0.0. The parameters (salt, IV, and key data) are used to encrypt and decrypt all passwords using AES256 in CBC mode. With the parameters known, all previously encrypted passwords can be decrypted. This includes the passwords that are part of configuration backups or otherwise embedded as part of ... An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware hashes and encrypts passwords using a hardcoded cryptographic key in sal_util_str_encrypt() in libsal.so.0.0. The parameters (salt, IV, and key data) are used to encrypt and decrypt all passwords using AES256 in CBC mode. With the parameters known, all previously encrypted passwords can be decrypted. This includes the passwords that are part of configuration backups or otherwise embedded as part of the firmware.

Show More

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware image contains encrypted passwords that are used to authenticate users wishing to access a diagnostics or password-recovery menu. Using the hardcoded cryptographic key found elsewhere in the firmware, these passwords can be decrypted. This is related to fds_sys_passDebugPasswd_ret() and fds_sys_passRecoveryPasswd_ret() in libfds.so.0.0.

The Eques elf smart plug and the mobile app use a hardcoded AES 256 bit key to encrypt the commands and responses between the device and the app. The communication happens over UDP port 27431. An attacker on the local network can use the same key to encrypt and send commands to discover all smart plugs in a network, take over control of a device, and perform actions such as turning it on and off.

Black Box iCOMPEL 9.2.3 through 11.1.4, as used in ONELAN Net-Top-Box 9.2.3 through 11.1.4 and other products, has default credentials that allow remote attackers to access devices remotely via SSH, HTTP, HTTPS, and FTP.

An issue was discovered in iNextrix ASTPP before 4.0.1. web_interface/astpp/application/config/config.php does not have strong random keys, as demonstrated by use of the 8YSDaBtDHAB3EQkxPAyTz2I5DttzA9uR private key and the r)fddEw232f encryption key.

The SSH service is enabled on the Zingbox Inspector versions 1.294 and earlier, exposing SSH to the local network. When combined with PAN-SA-2019-0027, this can allow an attacker to authenticate to the service using hardcoded credentials.

In the Zingbox Inspector, versions 1.294 and earlier, hardcoded credentials for root and inspector user accounts are present in the system software, which can result in unauthorized users gaining access to the system.

An issue was discovered in GitLab Community and Enterprise Edition 12.0 through 12.1.4. It uses Hard-coded Credentials.

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. Undocumented hard-coded user passwords for root, ineaadmin, mitsadmin, and maint could allow an attacker to gain unauthorised access to the RTU. (Also, the accounts ineaadmin and mitsadmin are able to escalate privileges to root without supplying a password due to insecure entries in /etc/sudoers on the RTU.)

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. Hard-coded SSH keys allow an attacker to gain unauthorised access or disclose encrypted data on the RTU due to the keys not being regenerated on initial installation or with firmware updates. In other words, these devices use private-key values in /etc/ssh/ssh_host_rsa_key, /etc/ssh/ssh_host_ecdsa_key, and /etc/ssh/ssh_host_dsa_key files that are publicly available from the ... An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. Hard-coded SSH keys allow an attacker to gain unauthorised access or disclose encrypted data on the RTU due to the keys not being regenerated on initial installation or with firmware updates. In other words, these devices use private-key values in /etc/ssh/ssh_host_rsa_key, /etc/ssh/ssh_host_ecdsa_key, and /etc/ssh/ssh_host_dsa_key files that are publicly available from the vendor web sites.

Show More

An exposed Telnet Service on the Billion Smart Energy Router SG600R2 with firmware v3.02.rc6 allows a local network attacker to authenticate via hardcoded credentials into a shell, gaining root execution privileges over the device.

A flaw was found in keycloack before version 8.0.0. The owner of 'placeholder.org' domain can setup mail server on this domain and knowing only name of a client can reset password and then log in. For example, for client name 'test' the email address will be '[email protected]'.

AdRem NetCrunch 10.6.0.4587 has a hardcoded SSL private key vulnerability in the NetCrunch web client. The same hardcoded SSL private key is used across different customers' installations when no other SSL certificate is installed, which allows remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

Ricoh SP C250DN 1.05 devices have a fixed password. FTP service credential were found to be hardcoded within the printer firmware. This would allow to an attacker to access and read information stored on the shared FTP folders.

CA Network Flow Analysis 9.x and 10.0.x have a default credential vulnerability that can allow a remote attacker to execute arbitrary commands and compromise system security.

CA Performance Management 3.5.x, 3.6.x before 3.6.9, and 3.7.x before 3.7.4 have a default credential vulnerability that can allow a remote attacker to execute arbitrary commands and compromise system security.

GE Mark VIe Controller is shipped with pre-configured hard-coded credentials that may allow root-user access to the controller. A limited application of the affected product may ship without setup and configuration instructions immediately available to the end user. The bulk of controllers go into applications requiring the GE commissioning engineer to change default configurations during the installation process. GE recommends that users reset controller passwords during installation in the ope ... GE Mark VIe Controller is shipped with pre-configured hard-coded credentials that may allow root-user access to the controller. A limited application of the affected product may ship without setup and configuration instructions immediately available to the end user. The bulk of controllers go into applications requiring the GE commissioning engineer to change default configurations during the installation process. GE recommends that users reset controller passwords during installation in the operating environment.

Show More

Rittal Chiller SK 3232-Series web interface as built upon Carel pCOWeb firmware A1.5.3 – B1.2.4. The authentication mechanism on affected systems is configured using hard-coded credentials. These credentials could allow attackers to influence the primary operations of the affected systems, namely turning the cooling unit on and off and setting the temperature set point.

Philips IntelliVue WLAN, portable patient monitors, WLAN Version A, Firmware A.03.09, WLAN Version A, Firmware A.03.09, Part #: M8096-67501, WLAN Version B, Firmware A.01.09, Part #: N/A (Replaced by Version C) and WLAN Version B, Firmware A.01.09, Part #: N/A (Replaced by Version C). An attacker can use these credentials to login via ftp and upload a malicious firmware.