Vulnerabilities (CVE)

Linear eMerge E3-Series devices have Hard-coded Credentials.

The ABB HMI components implement hidden administrative accounts that are used during the provisioning phase of the HMI interface. These credentials allow the provisioning tool "Panel Builder 600" to flash a new interface and Tags (MODBUS coils) mapping to the HMI. These credentials are the idal123 password for the IdalMaster account, and the exor password for the exor account. These credentials are used over both HTTP(S) and FTP. There is no option to disable or change these undocumented credent ... The ABB HMI components implement hidden administrative accounts that are used during the provisioning phase of the HMI interface. These credentials allow the provisioning tool "Panel Builder 600" to flash a new interface and Tags (MODBUS coils) mapping to the HMI. These credentials are the idal123 password for the IdalMaster account, and the exor password for the exor account. These credentials are used over both HTTP(S) and FTP. There is no option to disable or change these undocumented credentials. An attacker can use these credentials to login to ABB HMI to read/write HMI configuration files and also to reset the device. This affects ABB CP635 HMI, CP600 HMIClient, Panel Builder 600, IDAL FTP server, IDAL HTTP server, and multiple other HMI components.

Show More

SmarterTools SmarterMail 16.x before build 6985 has hardcoded secret keys. An unauthenticated attacker could access other users’ emails and file attachments. It was also possible to interact with mailing lists.

A CWE-798: Use of Hardcoded Credentials vulnerability exists in Modicon Controllers (All versions of the following CPUs and Communication Module product references listed in the Security Notifications), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network.

A CWE-798 use of hardcoded credentials vulnerability exists in BMX-NOR-0200H with firmware versions prior to V1.7 IR 19 which could cause a confidentiality issue when using FTP protocol.

The rpWLANRedirect.asp ASP page is accessible without authentication on ZyXEL P-660HN-T1 V2 (2.00(AAKK.3)) devices. After accessing the page, the admin user's password can be obtained by viewing the HTML source code, and the interface of the modem can be accessed as admin.

Use of Hard-coded Credentials vulnerability in FortiRecorder all versions below 2.7.4 may allow an unauthenticated attacker with knowledge of the aforementioned credentials and network access to FortiCameras to take control of those, provided they are managed by a FortiRecorder device.

A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V15.1 Update 1), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V15.1 Update 1), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 und KTP900F (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Professional (All versions < V15.1 Update 1), SIMATIC WinCC (TIA Portal) (All versions < V15.1 Update 1), SIMATIC HMI Cla ... A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V15.1 Update 1), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V15.1 Update 1), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 und KTP900F (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Professional (All versions < V15.1 Update 1), SIMATIC WinCC (TIA Portal) (All versions < V15.1 Update 1), SIMATIC HMI Classic Devices (TP/MP/OP/MP Mobile Panel) (All versions). The affected device offered SNMP read and write capacities with a publicly know hardcoded community string. The security vulnerability could be exploited by an attacker with network access to the affected device. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise confidentiality and integrity of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.

Show More

GE Communicator, all versions prior to 4.0.517, contains two backdoor accounts with hardcoded credentials, which may allow control over the database. This service is inaccessible to attackers if Windows default firewall settings are used by the end user.

Teradata Viewpoint before 14.0 and 16.20.00.02-b80 contains a hardcoded password of TDv1i2e3w4 for the viewpoint database account (in viewpoint-portal\conf\server.xml) that could potentially be exploited by malicious users to compromise the affected system.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-798: Use of Hard-coded Credentials.

An exploitable firmware downgrade vulnerability exists in the firmware update package functionality of the WAGO e!COCKPIT automation software v1.6.1.5. A specially crafted firmware update file can allow an attacker to install an older firmware version while the user thinks a newer firmware version is being installed. An attacker can create a custom firmware update package with invalid metadata in order to trigger this vulnerability.

An exploitable use of hard-coded credentials vulnerability exists in multiple iw_* utilities of the Moxa AWK-3131A firmware version 1.13. The device operating system contains an undocumented encryption password, allowing for the creation of custom diagnostic scripts.

The usage of hard-coded cryptographic keys within the ServiceAgent binary allows for the decryption of captured traffic across the network from or to the Moxa AWK-3131A firmware version 1.13.

A hard-coded encryption key vulnerability exists in the authentication functionality of WAGO e!Cockpit version 1.5.1.1. An attacker with access to communications between e!Cockpit and CoDeSyS Gateway can trivially recover the password of any user attempting to log in, in plain text.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 171832.

IBM Security Identity Manager 7.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 171511.

HCL AppScan Standard Edition 9.0.3.13 and earlier uses hard-coded credentials which can be exploited by attackers to get unauthorized access to the system.

"HCL AppScan Enterprise uses hard-coded credentials which can be exploited by attackers to get unauthorized access to application's encrypted files."

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 uses hard coded credentials which could allow a local user to obtain highly sensitive information. IBM X-Force ID: 161035.

IBM InfoSphere Information Server 11.7.1.0 stores a common hard coded encryption key that could be used to decrypt sensitive information. IBM X-Force ID: 159229.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary code and commands on the device due to insufficient UART protections.

Arlo Basestation firmware 1.12.0.1_27940 and prior contain a hardcoded username and password combination that allows root access to the device when an onboard serial interface is connected to.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 use default credentials admin/admin and moderator/moderator for the web interface. An unauthenticated, remote attacker can use these credentials to gain privileged access to the device.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to authentication bypass due to a hard-coded password in return.tgi. A remote, unauthenticated attacker can use this vulnerability to control external devices via the uart_bridge.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 contains multiple hard coded credentials for the Telnet and SSH interfaces.

Premisys Identicard version 3.1.190 stores backup files as encrypted zip files. The password to the zip is hard-coded and unchangeable. An attacker with access to these backups can decrypt them and obtain sensitive data.

Premisys Identicard version 3.1.190 stores user credentials and other sensitive information with a known weak encryption method (MD5 hash of a salt and password).

Premisys Identicard version 3.1.190 contains hardcoded credentials in the WCF service on port 9003. An authenticated remote attacker can use these credentials to access the badge system database and modify its contents.

Dell EMC Networking OS10 versions prior to 10.4.3 contain a cryptographic key vulnerability due to an underlying application using undocumented, pre-installed X.509v3 key/certificate pairs. An unauthenticated remote attacker with the knowledge of the default keys may potentially be able to intercept communications or operate the system with elevated privileges.

An issue was discovered on Wifi-soft UniBox controller 0.x through 2.x devices. The tools/ping Ping feature of the Diagnostic Tools component is vulnerable to Remote Command Execution, allowing an attacker to execute arbitrary system commands on the server with root user privileges. Authentication for accessing this component can be bypassed by using Hard coded credentials.

An issue was discovered on Wifi-soft UniBox controller 3.x devices. The tools/controller/diagnostic_tools_controller Diagnostic Tools Controller is vulnerable to Remote Command Execution, allowing an attacker to execute arbitrary system commands on the server with root user privileges. Authentication for accessing this component can be bypassed by using Hard coded credentials.

An issue was discovered on Wifi-soft UniBox controller 0.x through 2.x devices. network/mesh/edit-nds.php is vulnerable to arbitrary file upload, allowing an attacker to upload .php files and execute code on the server with root user privileges. Authentication for accessing this component can be bypassed by using Hard coded credentials.

An issue was discovered in Scytl sVote 2.1. Due to the implementation of the database manager, an attacker can access the OrientDB by providing admin as the admin password. A different password cannot be set because of the implementation in code.

Certain NETGEAR devices are affected by a hardcoded password. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.30, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.24, JR6150 before 1.0.1.24, R6120 before 1.0.0.48, R6220 before 1.1.0.86, R6230 before 1.1.0.86, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, and WNR2020 before 1.1.0.62.

An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. When using the device at initial setup, a default password is used (123456) for administrative purposes. There is no prompt to change this password. Note that this password can be used in combination with CVE-2019-20470.

Certain builds of NEC SV9100 software could allow an unauthenticated, remote attacker to log into a device running an affected release with a hardcoded username and password, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with manufacturer privilege level. An attacker could exploit this vulnerability by using this account to remotely log into an affected device. A successful exploit could allow the attacker to log into the device with manufacturer ... Certain builds of NEC SV9100 software could allow an unauthenticated, remote attacker to log into a device running an affected release with a hardcoded username and password, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with manufacturer privilege level. An attacker could exploit this vulnerability by using this account to remotely log into an affected device. A successful exploit could allow the attacker to log into the device with manufacturer level access. This vulnerability affects SV9100 PBXes that are running software release 6.0 or higher. This vulnerability does not affect SV9100 software releases prior to 6.0.

Show More

A vulnerability in Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to log in to the CLI of an affected system by using the SCP User account (scpuser), which has default user credentials. The vulnerability is due to the presence of a documented default account with an undocumented default password and incorrect permission settings for that account. Changing the default password ... A vulnerability in Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to log in to the CLI of an affected system by using the SCP User account (scpuser), which has default user credentials. The vulnerability is due to the presence of a documented default account with an undocumented default password and incorrect permission settings for that account. Changing the default password for this account is not enforced during the installation of the product. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the scpuser account. This includes full read and write access to the system's database.

Show More

A vulnerability in the Cisco FindIT Network Management Software virtual machine (VM) images could allow an unauthenticated, local attacker who has access to the VM console to log in to the device with a static account that has root privileges. The vulnerability is due to the presence of an account with static credentials in the underlying Linux operating system. An attacker could exploit this vulnerability by logging in to the command line of the affected VM with the static account. A successful ... A vulnerability in the Cisco FindIT Network Management Software virtual machine (VM) images could allow an unauthenticated, local attacker who has access to the VM console to log in to the device with a static account that has root privileges. The vulnerability is due to the presence of an account with static credentials in the underlying Linux operating system. An attacker could exploit this vulnerability by logging in to the command line of the affected VM with the static account. A successful exploit could allow the attacker to log in with root-level privileges. This vulnerability affects only Cisco FindIT Network Manager and Cisco FindIT Network Probe Release 1.1.4 if these products are using Cisco-supplied VM images. No other releases or deployment models are known to be vulnerable.

Show More