Vulnerabilities (CVE)

GossipSub 1.1, as used for Ethereum 2.0, allows a peer to maintain a positive score (and thus not be pruned from the network) even though it continuously misbehaves by never forwarding topic messages.

The dag-pb codec can panic when decoding invalid blocks.

libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes o ... libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes over a period of time (how long depends on the node resources i.e. a go-libp2p node on a virtual server with 4 gb of memory takes about 90 sec to bring down; on a larger server, it might take a bit longer.) This issue was patched in version 0.27.4.

Show More

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/b ... Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

Show More

github.com/ipfs/go-unixfsnode is an ADL IPLD prime node that wraps go-codec-dagpb's implementation of protobuf to enable pathing. In versions priot to 1.5.2 trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus fanout parameter in the HAMT directory nodes. Users are advised to upgrade. There are no known workarounds for this vulnerability.

go-bitfield is a simple bitfield package for the go language aiming to be more performant that the standard library. When feeding untrusted user input into the size parameter of `NewBitfield` and `FromBytes` functions, an attacker can trigger `panic`s. This happen when the `size` is a not a multiple of `8` or is negative. There were already a note in the `NewBitfield` documentation, however known users of this package are subject to this issue. Users are advised to upgrade. Users unable to upgra ... go-bitfield is a simple bitfield package for the go language aiming to be more performant that the standard library. When feeding untrusted user input into the size parameter of `NewBitfield` and `FromBytes` functions, an attacker can trigger `panic`s. This happen when the `size` is a not a multiple of `8` or is negative. There were already a note in the `NewBitfield` documentation, however known users of this package are subject to this issue. Users are advised to upgrade. Users unable to upgrade should ensure that `size` is a multiple of 8 before calling `NewBitfield` or `FromBytes`.

Show More

go-unixfs is an implementation of a unix-like filesystem on top of an ipld merkledag. Trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus `fanout` parameter in the HAMT directory nodes. Users are advised to upgrade to version 0.4.3 to resolve this issue. Users unable to upgrade should not feed untrusted user data to the decoding functions.

go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Encoding data which contains a Bytes kind Node will pass a Bytes token to the JSON encoder which will panic as it doesn't expect to receive Bytes tokens. Such an encode should be treated as an error, as plain JSON should not be able to encode Bytes. This only impacts uses of the `json` ... go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Encoding data which contains a Bytes kind Node will pass a Bytes token to the JSON encoder which will panic as it doesn't expect to receive Bytes tokens. Such an encode should be treated as an error, as plain JSON should not be able to encode Bytes. This only impacts uses of the `json` codec. `dag-json` is not impacted. Use of `json` as a decoder is not impacted. This issue is fixed in v0.19.0. As a workaround, one may prefer the `dag-json` codec, which has the ability to encode bytes.

Show More

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using ... go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

Show More

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits ha ... go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

Show More

js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limit ... js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of js-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to update their js-libp2p dependency to `v0.38.0` or greater. There are no known workarounds for this vulnerability.

Show More

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based netwo ... libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Show More

An issue was discovered in the multihash crate before 0.11.3 for Rust. The from_slice parsing code can panic via unsanitized data from a network server.

go-ipfs is an open-source golang implementation of IPFS which is a global, versioned, peer-to-peer filesystem. In go-ipfs before version 0.8.0, control characters are not escaped from console output. This can result in hiding input from the user which could result in the user taking an unknown, malicious action. This is fixed in version 0.8.0.

go-ipfs is an open-source golang implementation of IPFS which is a global, versioned, peer-to-peer filesystem. In go-ipfs before version 0.8.0-rc1, it is possible for path traversal to occur with DAGs containing relative paths during retrieval. This can cause files to be overwritten, or written to incorrect output directories. The issue can only occur when a get is done on an affected DAG. This is fixed in version 0.8.0-rc1.

Gossipsub 1.0 does not properly resist invalid message spam, such as an eclipse attack or a sybil attack.

An issue was discovered in IPFS (aka go-ipfs) 0.4.23. An attacker can generate ephemeral identities (Sybils) and leverage the IPFS connection management reputation system to poison other nodes' routing tables, eclipsing the nodes that are the target of the attack from the rest of the network. Later versions, in particular go-ipfs 0.7, mitigate this.