Vulnerabilities (CVE)

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, a second-order expression injection vulnerability existed in n8n's Form nodes that could allow an unauthenticated attacker to inject and evaluate arbitrary n8n expressions by submitting crafted form data. When chained with an expression sandbox escape, this could escalate to remote code execution on the n8n host. The vulnerability requires a specific workflow configuration to be exploitable. First, ... n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, a second-order expression injection vulnerability existed in n8n's Form nodes that could allow an unauthenticated attacker to inject and evaluate arbitrary n8n expressions by submitting crafted form data. When chained with an expression sandbox escape, this could escalate to remote code execution on the n8n host. The vulnerability requires a specific workflow configuration to be exploitable. First, a form node with a field interpolating a value provided by an unauthenticated user, e.g. a form submitted value. Second, the field value must begin with an `=` character, which caused n8n to treat it as an expression and triggered a double-evaluation of the field content. There is no practical reason for a workflow designer to prefix a field with `=` intentionally — the character is not rendered in the output, so the result would not match the designer's expectations. If added accidentally, it would be noticeable and very unlikely to persist. An unauthenticated attacker would need to either know about this specific circumstance on a target instance or discover a matching form by chance. Even when the preconditions are met, the expression injection alone is limited to data accessible within the n8n expression context. Escalation to remote code execution requires chaining with a separate sandbox escape vulnerability. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Review usage of form nodes manually for above mentioned preconditions, disable the Form node by adding `n8n-nodes-base.form` to the `NODES_EXCLUDE` environment variable, and/or disable the Form Trigger node by adding `n8n-nodes-base.formTrigger` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could use the Python Code node to escape the sandbox. The sandbox did not sufficiently restrict access to certain built-in Python objects, allowing an attacker to exfiltrate file contents or achieve RCE. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instance ... n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could use the Python Code node to escape the sandbox. The sandbox did not sufficiently restrict access to certain built-in Python objects, allowing an attacker to exfiltrate file contents or achieve RCE. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only., and/or disable the Code node by adding `n8n-nodes-base.code` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrad ... n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other ... n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to limit the blast radius. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could leverage the Merge node's SQL query mode to execute arbitrary code and write arbitrary files on the n8n server. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, admini ... n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could leverage the Merge node's SQL query mode to execute arbitrary code and write arbitrary files on the n8n server. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of t ... n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Read/Write Files from Disk node by adding `n8n-nodes-base.readWriteFile` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijac ... n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijacking and account takeover. The issues have been fixed in n8n versions 2.10.1 and 1.123.21. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Webhook node by adding `n8n-nodes-base.webhook` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

Show More

n8n is an open source workflow automation platform. From version 0.187.0 to before 1.120.3, a command injection vulnerability was identified in n8n’s community package installation functionality. The issue allowed authenticated users with administrative permissions to execute arbitrary system commands on the n8n host under specific conditions. This issue has been patched in version 1.120.3.

n8n contains a critical Remote Code Execution (RCE) vulnerability in its workflow Expression evaluation system. Expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including una ... n8n contains a critical Remote Code Execution (RCE) vulnerability in its workflow Expression evaluation system. Expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including unauthorized access to sensitive data, modification of workflows, and execution of system-level operations.

Show More

n8n is an open source workflow automation platform. Prior to 1.121.0, there is a vulnerability in the HTTP Request node's credential domain validation allowed an authenticated attacker to send requests with credentials to unintended domains, potentially leading to credential exfiltration. This only might affect user who have credentials that use wildcard domain patterns (e.g., *.example.com) in the "Allowed domains" setting. This issue is fixed in version 1.121.0 and later.

n8n is an open source workflow automation platform. From version 1.65.0 to before 1.114.3, the use of Buffer.allocUnsafe() and Buffer.allocUnsafeSlow() in the task runner allowed untrusted code to allocate uninitialized memory. Such uninitialized buffers could contain residual data from within the same Node.js process (for example, data from prior requests, tasks, secrets, or tokens), resulting in potential information disclosure. This issue has been patched in version 1.114.3.

Using string formatting and exception handling, an attacker may bypass n8n's python-task-executor sandbox restrictions and run arbitrary unrestricted Python code in the underlying operating system. The vulnerability can be exploited via the Code block by an authenticated user with basic permissions and can lead to a full n8n instance takeover on instances operating under "Internal" execution mode. If the instance is operating under the "External" execution mode (ex. n8n's official Docker imag ... Using string formatting and exception handling, an attacker may bypass n8n's python-task-executor sandbox restrictions and run arbitrary unrestricted Python code in the underlying operating system. The vulnerability can be exploited via the Code block by an authenticated user with basic permissions and can lead to a full n8n instance takeover on instances operating under "Internal" execution mode. If the instance is operating under the "External" execution mode (ex. n8n's official Docker image) - arbitrary code execution occurs inside a Sidecar container and not the main node, which significantly reduces the vulnerability impact.

Show More

n8n is an open source workflow automation platform. Prior to version 2.4.8, a vulnerability in the Python Code node allows authenticated users to break out of the Python sandbox environment and execute code outside the intended security boundary. This issue has been patched in version 2.4.8.

n8n is an open source workflow automation platform. Prior to versions 1.118.0 and 2.4.0, a vulnerability in the Merge node's SQL Query mode allowed authenticated users with permission to create or modify workflows to write arbitrary files to the n8n server's filesystem potentially leading to remote code execution. This issue has been patched in versions 1.118.0 and 2.4.0.

n8n is an open source workflow automation platform. Prior to versions 1.123.12 and 2.4.0, when workflows process uploaded files and transfer them to remote servers via the SSH node without validating their metadata the vulnerability can lead to files being written to unintended locations on those remote systems potentially leading to remote code execution on those systems. As a prerequisites an unauthenticated attacker needs knowledge of such workflows existing and the endpoints for file uploads ... n8n is an open source workflow automation platform. Prior to versions 1.123.12 and 2.4.0, when workflows process uploaded files and transfer them to remote servers via the SSH node without validating their metadata the vulnerability can lead to files being written to unintended locations on those remote systems potentially leading to remote code execution on those systems. As a prerequisites an unauthenticated attacker needs knowledge of such workflows existing and the endpoints for file uploads need to be unauthenticated. This issue has been patched in versions 1.123.12 and 2.4.0.

Show More

n8n is an open source workflow automation platform. Prior to versions 1.123.9 and 2.2.1, a Cross-Site Scripting (XSS) vulnerability existed in a markdown rendering component used in n8n's interface, including workflow sticky notes and other areas that support markdown content. An authenticated user with permission to create or modify workflows could abuse this to execute scripts with same-origin privileges when other users interact with a maliciously crafted workflow. This could lead to session ... n8n is an open source workflow automation platform. Prior to versions 1.123.9 and 2.2.1, a Cross-Site Scripting (XSS) vulnerability existed in a markdown rendering component used in n8n's interface, including workflow sticky notes and other areas that support markdown content. An authenticated user with permission to create or modify workflows could abuse this to execute scripts with same-origin privileges when other users interact with a maliciously crafted workflow. This could lead to session hijacking and account takeover. This issue has been patched in versions 1.123.9 and 2.2.1.

Show More

n8n is an open source workflow automation platform. Prior to versions 1.123.10 and 2.5.0, vulnerabilities in the Git node allowed authenticated users with permission to create or modify workflows to execute arbitrary system commands or read arbitrary files on the n8n host. This issue has been patched in versions 1.123.10 and 2.5.0.

n8n is an open source workflow automation platform. Prior to versions 1.123.18 and 2.5.0, a vulnerability in the file access controls allows authenticated users with permission to create or modify workflows to read sensitive files from the n8n host system. This can be exploited to obtain critical configuration data and user credentials, leading to complete account takeover of any user on the instance. This issue has been patched in versions 1.123.18 and 2.5.0.

n8n is an open source workflow automation platform. Prior to version 1.123.2, a Cross-Site Scripting (XSS) vulnerability has been identified in the handling of webhook responses and related HTTP endpoints. Under certain conditions, the Content Security Policy (CSP) sandbox protection intended to isolate HTML responses may not be applied correctly. An authenticated user with permission to create or modify workflows could abuse this to execute malicious scripts with same-origin privileges when oth ... n8n is an open source workflow automation platform. Prior to version 1.123.2, a Cross-Site Scripting (XSS) vulnerability has been identified in the handling of webhook responses and related HTTP endpoints. Under certain conditions, the Content Security Policy (CSP) sandbox protection intended to isolate HTML responses may not be applied correctly. An authenticated user with permission to create or modify workflows could abuse this to execute malicious scripts with same-origin privileges when other users interact with the crafted workflow. This could lead to session hijacking and account takeover. This issue has been patched in version 1.123.2.

Show More

n8n is an open source workflow automation platform. Prior to versions 1.123.17 and 2.5.2, an authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. This issue has been patched in versions 1.123.17 and 2.5.2.

n8n is an open source workflow automation platform. In versions from 0.150.0 to before 2.2.2, an authentication bypass vulnerability in the Stripe Trigger node allows unauthenticated parties to trigger workflows by sending forged Stripe webhook events. The Stripe Trigger creates and stores a Stripe webhook signing secret when registering the webhook endpoint, but incoming webhook requests were not verified against this secret. As a result, any HTTP client that knows the webhook URL could send a ... n8n is an open source workflow automation platform. In versions from 0.150.0 to before 2.2.2, an authentication bypass vulnerability in the Stripe Trigger node allows unauthenticated parties to trigger workflows by sending forged Stripe webhook events. The Stripe Trigger creates and stores a Stripe webhook signing secret when registering the webhook endpoint, but incoming webhook requests were not verified against this secret. As a result, any HTTP client that knows the webhook URL could send a POST request containing a matching event type, causing the workflow to execute as if a legitimate Stripe event had been received. This issue affects n8n users who have active workflows using the Stripe Trigger node. An attacker could potentially fake payment or subscription events and influence downstream workflow behavior. The practical risk is reduced by the fact that the webhook URL contains a high-entropy UUID; however, authenticated n8n users with access to the workflow can view this webhook ID. This issue has been patched in version 2.2.2. A temporary workaround for this issue involves users deactivating affected workflows or restricting access to workflows containing Stripe Trigger nodes to trusted users only.

Show More

n8n is an open source workflow automation platform. In versions 0.121.2 and below, an authenticated attacker may be able to execute malicious code using the n8n service. This could result in full compromise and can impact both self-hosted and n8n Cloud instances. This issue is fixed in version 1.121.3. Administrators can reduce exposure by disabling the Git node and limiting access for untrusted users, but upgrading to the latest version is recommended.

n8n is an open source workflow automation platform. Versions starting with 1.65.0 and below 1.121.0 enable an attacker to access files on the underlying server through execution of certain form-based workflows. A vulnerable workflow could grant access to an unauthenticated remote attacker, resulting in exposure of sensitive information stored on the system and may enable further compromise depending on deployment configuration and workflow usage. This issue is fixed in version 1.121.0.

n8n is an open source workflow automation platform. From 1.36.0 to before 2.2.0, the Webhook node’s IP whitelist validation performed partial string matching instead of exact IP comparison. As a result, an incoming request could be accepted if the source IP address merely contained the configured whitelist entry as a substring. This issue affected instances where workflow editors relied on IP-based access controls to restrict webhook access. Both IPv4 and IPv6 addresses were impacted. An attacke ... n8n is an open source workflow automation platform. From 1.36.0 to before 2.2.0, the Webhook node’s IP whitelist validation performed partial string matching instead of exact IP comparison. As a result, an incoming request could be accepted if the source IP address merely contained the configured whitelist entry as a substring. This issue affected instances where workflow editors relied on IP-based access controls to restrict webhook access. Both IPv4 and IPv6 addresses were impacted. An attacker with a non-whitelisted IP could bypass restrictions if their IP shared a partial prefix with a trusted address, undermining the intended security boundary. This vulnerability is fixed in 2.2.0.

Show More

n8n is an open source workflow automation platform. From version 1.0.0 to before 2.0.0, a sandbox bypass vulnerability exists in the Python Code Node that uses Pyodide. An authenticated user with permission to create or modify workflows can exploit this vulnerability to execute arbitrary commands on the host system running n8n, using the same privileges as the n8n process. This issue has been patched in version 2.0.0. Workarounds for this issue involve disabling the Code Node by setting the envi ... n8n is an open source workflow automation platform. From version 1.0.0 to before 2.0.0, a sandbox bypass vulnerability exists in the Python Code Node that uses Pyodide. An authenticated user with permission to create or modify workflows can exploit this vulnerability to execute arbitrary commands on the host system running n8n, using the same privileges as the n8n process. This issue has been patched in version 2.0.0. Workarounds for this issue involve disabling the Code Node by setting the environment variable NODES_EXCLUDE: "[\"n8n-nodes-base.code\"]", disabling Python support in the Code node by setting the environment variable N8N_PYTHON_ENABLED=false, which was introduced in n8n version 1.104.0, and configuring n8n to use the task runner based Python sandbox via the N8N_RUNNERS_ENABLED and N8N_NATIVE_PYTHON_RUNNER environment variables.

Show More

n8n is an open source workflow automation platform. Versions 0.123.1 through 1.119.1 do not have adequate protections to prevent RCE through the project's pre-commit hooks. The Add Config operation allows workflows to set arbitrary Git configuration values, including core.hooksPath, which can point to a malicious Git hook that executes arbitrary commands on the n8n host during subsequent Git operations. Exploitation requires the ability to create or modify an n8n workflow using the Git node. Thi ... n8n is an open source workflow automation platform. Versions 0.123.1 through 1.119.1 do not have adequate protections to prevent RCE through the project's pre-commit hooks. The Add Config operation allows workflows to set arbitrary Git configuration values, including core.hooksPath, which can point to a malicious Git hook that executes arbitrary commands on the n8n host during subsequent Git operations. Exploitation requires the ability to create or modify an n8n workflow using the Git node. This issue is fixed in version 1.119.2. Workarounds include excluding the Git Node (Docs) and avoiding cloning or interacting with untrusted repositories using the Git Node.

Show More

n8n is an open source workflow automation platform. Versions starting with 0.211.0 and prior to 1.120.4, 1.121.1, and 1.122.0 contain a critical Remote Code Execution (RCE) vulnerability in their workflow expression evaluation system. Under certain conditions, expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execut ... n8n is an open source workflow automation platform. Versions starting with 0.211.0 and prior to 1.120.4, 1.121.1, and 1.122.0 contain a critical Remote Code Execution (RCE) vulnerability in their workflow expression evaluation system. Under certain conditions, expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including unauthorized access to sensitive data, modification of workflows, and execution of system-level operations. This issue has been fixed in versions 1.120.4, 1.121.1, and 1.122.0. Users are strongly advised to upgrade to a patched version, which introduces additional safeguards to restrict expression evaluation. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only; and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully eliminate the risk and should only be used as short-term measures.

Show More

n8n is an open source workflow automation platform. Prior to version 1.114.0, a stored Cross-Site Scripting (XSS) vulnerability may occur in n8n when using the “Respond to Webhook” node. When this node responds with HTML content containing executable scripts, the payload may execute directly in the top-level window, rather than within the expected sandbox introduced in version 1.103.0. This behavior can enable a malicious actor with workflow creation permissions to execute arbitrary JavaScript i ... n8n is an open source workflow automation platform. Prior to version 1.114.0, a stored Cross-Site Scripting (XSS) vulnerability may occur in n8n when using the “Respond to Webhook” node. When this node responds with HTML content containing executable scripts, the payload may execute directly in the top-level window, rather than within the expected sandbox introduced in version 1.103.0. This behavior can enable a malicious actor with workflow creation permissions to execute arbitrary JavaScript in the context of the n8n editor interface. This issue has been patched in version 1.114.0. Workarounds for this issue involve restricting workflow creation and modification privileges to trusted users only, avoiding use of untrusted HTML responses in the “Respond to Webhook” node, and using an external reverse proxy or HTML sanitizer to filter responses that include executable scripts.

Show More

n8n is an open source workflow automation platform. Prior to version 2.0.0, in self-hosted n8n instances where the Code node runs in legacy (non-task-runner) JavaScript execution mode, authenticated users with workflow editing access can invoke internal helper functions from within the Code node. This allows a workflow editor to perform actions on the n8n host with the same privileges as the n8n process, including: reading files from the host filesystem (subject to any file-access restrictions c ... n8n is an open source workflow automation platform. Prior to version 2.0.0, in self-hosted n8n instances where the Code node runs in legacy (non-task-runner) JavaScript execution mode, authenticated users with workflow editing access can invoke internal helper functions from within the Code node. This allows a workflow editor to perform actions on the n8n host with the same privileges as the n8n process, including: reading files from the host filesystem (subject to any file-access restrictions configured on the instance and OS/container permissions), and writing files to the host filesystem (subject to the same restrictions). This issue has been patched in version 2.0.0. Workarounds for this issue involve limiting file operations by setting N8N_RESTRICT_FILE_ACCESS_TO to a dedicated directory (e.g., ~/.n8n-files) and ensure it contains no sensitive data, keeping N8N_BLOCK_FILE_ACCESS_TO_N8N_FILES=true (default) to block access to .n8n and user-defined config files, and disabling high-risk nodes (including the Code node) using NODES_EXCLUDE if workflow editors are not fully trusted.

Show More

n8n is an open source workflow automation platform. Prior to 1.113.0, a remote code execution vulnerability exists in the Git Node component available in both Cloud and Self-Hosted versions of n8n. When a malicious actor clones a remote repository containing a pre-commit hook, the subsequent use of the Commit operation in the Git Node can inadvertently trigger the hook’s execution. This allows attackers to execute arbitrary code within the n8n environment, potentially compromising the system and ... n8n is an open source workflow automation platform. Prior to 1.113.0, a remote code execution vulnerability exists in the Git Node component available in both Cloud and Self-Hosted versions of n8n. When a malicious actor clones a remote repository containing a pre-commit hook, the subsequent use of the Commit operation in the Git Node can inadvertently trigger the hook’s execution. This allows attackers to execute arbitrary code within the n8n environment, potentially compromising the system and any connected credentials or workflows. This vulnerability is fixed in 1.113.0.

Show More

n8n is an open source workflow automation platform. From 1.24.0 to before 1.107.0, there is a stored cross-site scripting (XSS) vulnerability in @n8n/n8n-nodes-langchain.chatTrigger. An authorized user can configure the LangChain Chat Trigger node with malicious JavaScript in the initialMessages field and enable public access so that the payload is executed in the browser of any user who visits the resulting public chat URL. This can be used for phishing or to steal cookies or other sensitive da ... n8n is an open source workflow automation platform. From 1.24.0 to before 1.107.0, there is a stored cross-site scripting (XSS) vulnerability in @n8n/n8n-nodes-langchain.chatTrigger. An authorized user can configure the LangChain Chat Trigger node with malicious JavaScript in the initialMessages field and enable public access so that the payload is executed in the browser of any user who visits the resulting public chat URL. This can be used for phishing or to steal cookies or other sensitive data from users accessing the public chat link. The issue is fixed in version 1.107.0. Updating to 1.107.0 or later is recommended. As a workaround, the affected chatTrigger node can be disabled. No other workarounds are known.

Show More

n8n-workflows Main Commit ee25413 allows attackers to execute a directory traversal via the download_workflow function within api_server.py

An arbitrary file upload vulnerability in the Chat Trigger component of N8N v1.95.3, v1.100.1, and v1.101.1 allows attackers to execute arbitrary code via uploading a crafted HTML file.

n8n is a workflow automation platform. Prior to version 1.99.1, an authorization vulnerability was discovered in the /rest/executions/:id/stop endpoint of n8n. An authenticated user can stop workflow executions that they do not own or that have not been shared with them, leading to potential business disruption. This issue has been patched in version 1.99.1. A workaround involves restricting access to the /rest/executions/:id/stop endpoint via reverse proxy or API gateway.

n8n is a workflow automation platform. Prior to version 1.99.0, there is a denial of Service vulnerability in /rest/binary-data endpoint when processing empty filesystem URIs (filesystem:// or filesystem-v2://). This allows authenticated attackers to cause service unavailability through malformed filesystem URI requests, effecting the /rest/binary-data endpoint and n8n.cloud instances (confirmed HTTP/2 524 timeout responses). Attackers can exploit this by sending GET requests with empty filesyst ... n8n is a workflow automation platform. Prior to version 1.99.0, there is a denial of Service vulnerability in /rest/binary-data endpoint when processing empty filesystem URIs (filesystem:// or filesystem-v2://). This allows authenticated attackers to cause service unavailability through malformed filesystem URI requests, effecting the /rest/binary-data endpoint and n8n.cloud instances (confirmed HTTP/2 524 timeout responses). Attackers can exploit this by sending GET requests with empty filesystem URIs (filesystem:// or filesystem-v2://) to the /rest/binary-data endpoint, causing resource exhaustion and service disruption. This issue has been patched in version 1.99.0.

Show More

n8n is a workflow automation platform. From 1.77.0 to before 1.98.2, a stored Cross-Site Scripting (XSS) vulnerability was identified in n8n, specifically in the Form Trigger node's HTML form element. An authenticated attacker can inject malicious HTML via an <iframe> with a srcdoc payload that includes arbitrary JavaScript execution. The attacker can also inject malicious Javascript by using <video> coupled <source> using an onerror event. While using iframe or a combination of video and source ... n8n is a workflow automation platform. From 1.77.0 to before 1.98.2, a stored Cross-Site Scripting (XSS) vulnerability was identified in n8n, specifically in the Form Trigger node's HTML form element. An authenticated attacker can inject malicious HTML via an <iframe> with a srcdoc payload that includes arbitrary JavaScript execution. The attacker can also inject malicious Javascript by using <video> coupled <source> using an onerror event. While using iframe or a combination of video and source tag, this vulnerability allows for Account Takeover (ATO) by exfiltrating n8n-browserId and session cookies from authenticated users who visit a maliciously crafted form. Using these tokens and cookies, an attacker can impersonate the victim and change account details such as email addresses, enabling full control over the account—especially if 2FA is not enabled. Users should upgrade to version >= 1.98.2.

Show More

n8n is a workflow automation platform. Before 1.106.0, a symlink traversal vulnerability was discovered in the Read/Write File node in n8n. While the node attempts to restrict access to sensitive directories and files, it does not properly account for symbolic links (symlinks). An attacker with the ability to create symlinks—such as by using the Execute Command node—could exploit this to bypass the intended directory restrictions and read from or write to otherwise inaccessible paths. Users of n ... n8n is a workflow automation platform. Before 1.106.0, a symlink traversal vulnerability was discovered in the Read/Write File node in n8n. While the node attempts to restrict access to sensitive directories and files, it does not properly account for symbolic links (symlinks). An attacker with the ability to create symlinks—such as by using the Execute Command node—could exploit this to bypass the intended directory restrictions and read from or write to otherwise inaccessible paths. Users of n8n.cloud are not impacted. Affected users should update to version 1.106.0 or later.

Show More

n8n is a workflow automation platform. Versions prior to 1.98.0 have an Open Redirect vulnerability in the login flow. Authenticated users can be redirected to untrusted, attacker-controlled domains after logging in, by crafting malicious URLs with a misleading redirect query parameter. This may lead to phishing attacks by impersonating the n8n UI on lookalike domains (e.g., n8n.local.evil.com), credential or 2FA theft if users are tricked into re-entering sensitive information, and/or reputatio ... n8n is a workflow automation platform. Versions prior to 1.98.0 have an Open Redirect vulnerability in the login flow. Authenticated users can be redirected to untrusted, attacker-controlled domains after logging in, by crafting malicious URLs with a misleading redirect query parameter. This may lead to phishing attacks by impersonating the n8n UI on lookalike domains (e.g., n8n.local.evil.com), credential or 2FA theft if users are tricked into re-entering sensitive information, and/or reputation risk due to the visual similarity between attacker-controlled domains and trusted ones. The vulnerability affects anyone hosting n8n and exposing the `/signin` endpoint to users. The issue has been patched in version 1.98.0. All users should upgrade to this version or later. The fix introduces strict origin validation for redirect URLs, ensuring only same-origin or relative paths are allowed after login.

Show More

n8n is a workflow automation platform. Prior to version 1.90.0, n8n is vulnerable to stored cross-site scripting (XSS) through the attachments view endpoint. n8n workflows can store and serve binary files, which are accessible to authenticated users. However, there is no restriction on the MIME type of uploaded files, and the MIME type could be controlled via a GET parameter. This allows the server to respond with any MIME type, potentially enabling malicious content to be interpreted and execut ... n8n is a workflow automation platform. Prior to version 1.90.0, n8n is vulnerable to stored cross-site scripting (XSS) through the attachments view endpoint. n8n workflows can store and serve binary files, which are accessible to authenticated users. However, there is no restriction on the MIME type of uploaded files, and the MIME type could be controlled via a GET parameter. This allows the server to respond with any MIME type, potentially enabling malicious content to be interpreted and executed by the browser. An authenticated attacker with member-level permissions could exploit this by uploading a crafted HTML file containing malicious JavaScript. When another user visits the binary data endpoint with the MIME type set to text/html, the script executes in the context of the user’s session. This script could send a request to change the user’s email address in their account settings, effectively enabling account takeover. This issue has been patched in version 1.90.0.

Show More

The n8n package 0.218.0 for Node.js allows Escalation of Privileges.