Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.6 ... In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2.

Show More

In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Check find_first_bit() return value We must check the return value of find_first_bit() before using the return value as an index array since it happens to overflow the array and then panic: [ 107.318430] Kernel BUG [#1] [ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2 [ 107.319465] Hardware name: riscv-virtio,qemu (DT) [ 107.319551] epc : pmu_sbi_ovf_handle ... In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Check find_first_bit() return value We must check the return value of find_first_bit() before using the return value as an index array since it happens to overflow the array and then panic: [ 107.318430] Kernel BUG [#1] [ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2 [ 107.319465] Hardware name: riscv-virtio,qemu (DT) [ 107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.319840] ra : pmu_sbi_ovf_handler+0x52/0x3ae [ 107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350 [ 107.319884] gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480 [ 107.319899] t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520 [ 107.319921] s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff [ 107.319936] a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000 [ 107.319951] a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55 [ 107.319965] s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f [ 107.319980] s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000 [ 107.319995] s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0 [ 107.320009] s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000 [ 107.320023] t5 : ffffaf7f80000000 t6 : ffffaf8000000000 [ 107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0 [ 107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36 [ 107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e [ 107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86 [ 107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96 [ 107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097 [ 107.320585] ---[ end trace 0000000000000000 ]--- [ 107.320704] Kernel panic - not syncing: Fatal exception in interrupt [ 107.320775] SMP: stopping secondary CPUs [ 107.321219] Kernel Offset: 0x0 from 0xffffffff80000000 [ 107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Show More

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_com ... In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask. The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again. v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf: Detect IP == ksym.end as part of BPF program Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in ... In the Linux kernel, the following vulnerability has been resolved: bpf: Detect IP == ksym.end as part of BPF program Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in callers will also never be marked as seen. The tempting way to fix this would be to emit extra 'int3' instructions which bump the jited_len of a program, and ensure that during runtime when a program throws, we can discover its boundaries even if the call instruction to bpf_throw (or to subprogs that always throw) is emitted as the final instruction in the program. An example of such a program would be this: do_something(): ... r0 = 0 exit foo(): r1 = 0 call bpf_throw r0 = 0 exit bar(cond): if r1 != 0 goto pc+2 call do_something exit call foo r0 = 0 // Never seen by verifier exit // main(ctx): r1 = ... call bar r0 = 0 exit Here, if we do end up throwing, the stacktrace would be the following: bpf_throw foo bar main In bar, the final instruction emitted will be the call to foo, as such, the return address will be the subsequent instruction (which the JIT emits as int3 on x86). This will end up lying outside the jited_len of the program, thus, when unwinding, we will fail to discover the return address as belonging to any program and end up in a panic due to the unreliable stack unwinding of BPF programs that we never expect. To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as part of the BPF program, so that is_bpf_text_address returns true when such a case occurs, and we are able to unwind reliably when the final instruction ends up being a call instruction.

Show More

In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address ... In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540.

Show More

In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051 ... In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73 [ 444.364771] Hardware name: riscv-virtio,qemu (DT) [ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436 [ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32 [ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800 [ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0 [ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0 [ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000 [ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100 [ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000 [ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98 [ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000 [ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001 [ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6 [ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0 [ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436 [ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32 [ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa [ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66 [ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac [ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c [ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e [ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96 [ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52 [ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98 [ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a [ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da [ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a [ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114 [ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a [ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46 [ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74 [ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e [ 444.365796] ---[ end trace 0000000000000000 ]--- That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support") was wrong since there is no need to broadcast to other cpus when starting a counter, that's only needed in mmap when the counters could have already been started on other cpus, so simply remove this broadcast.

Show More

In the Linux kernel, the following vulnerability has been resolved: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter gra ... In the Linux kernel, the following vulnerability has been resolved: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge

Show More

In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_ ... In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().

Show More

In the Linux kernel, the following vulnerability has been resolved: net: mctp: take ownership of skb in mctp_local_output Currently, mctp_local_output only takes ownership of skb on success, and we may leak an skb if mctp_local_output fails in specific states; the skb ownership isn't transferred until the actual output routing occurs. Instead, make mctp_local_output free the skb on all error paths up to the route action, so it always consumes the passed skb.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix PPE hanging issue A patch to resolve an issue was found in MediaTek's GPL-licensed SDK: In the mtk_ppe_stop() function, the PPE scan mode is not disabled before disabling the PPE. This can potentially lead to a hang during the process of disabling the PPE. Without this patch, the PPE may experience a hang during the reboot test.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't set the MFP flag for the GTK The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI erro ... In the Linux kernel, the following vulnerability has been resolved: hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI errors (for example if the disk drive was disconnected). This patch checks scsi_execute_cmd() output and returns -EIO if it's error code is positive. [groeck: Avoid inline variable declaration for portability]

Show More

In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix incorrect usage for sb_index Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the bitmap file") removed page->index from bitmap code, but left wrong code logic for clustered-md. current code never set slot offset for cluster nodes, will sometimes cause crash in clustered env. Call trace (partly): md_bitmap_file_set_bit+0x110/0x1d8 [md_mod] md_bitmap_startwrite+0x13c/0x240 [md_mod] raid ... In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix incorrect usage for sb_index Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the bitmap file") removed page->index from bitmap code, but left wrong code logic for clustered-md. current code never set slot offset for cluster nodes, will sometimes cause crash in clustered env. Call trace (partly): md_bitmap_file_set_bit+0x110/0x1d8 [md_mod] md_bitmap_startwrite+0x13c/0x240 [md_mod] raid1_make_request+0x6b0/0x1c08 [raid1] md_handle_request+0x1dc/0x368 [md_mod] md_submit_bio+0x80/0xf8 [md_mod] __submit_bio+0x178/0x300 submit_bio_noacct_nocheck+0x11c/0x338 submit_bio_noacct+0x134/0x614 submit_bio+0x28/0xdc submit_bh_wbc+0x130/0x1cc submit_bh+0x1c/0x28

Show More

In the Linux kernel, the following vulnerability has been resolved: debugfs: fix wait/cancellation handling during remove Ben Greear further reports deadlocks during concurrent debugfs remove while files are being accessed, even though the code in question now uses debugfs cancellations. Turns out that despite all the review on the locking, we missed completely that the logic is wrong: if the refcount hits zero we can finish (and need not wait for the completion), but if it doesn't we have to ... In the Linux kernel, the following vulnerability has been resolved: debugfs: fix wait/cancellation handling during remove Ben Greear further reports deadlocks during concurrent debugfs remove while files are being accessed, even though the code in question now uses debugfs cancellations. Turns out that despite all the review on the locking, we missed completely that the logic is wrong: if the refcount hits zero we can finish (and need not wait for the completion), but if it doesn't we have to trigger all the cancellations. As written, we can _never_ get into the loop triggering the cancellations. Fix this, and explain it better while at it.

Show More

In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() ... In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() to md_stop_writes(). 2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen, it only prevent new sync_thread to start, and it can't stop the running sync thread; In order to frozen sync_thread, after seting the flag, stop_sync_thread() should be used. 3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use it as condition for md_stop_writes() in raid_postsuspend() doesn't look correct. Consider that reentrant stop_sync_thread() do nothing, always call md_stop_writes() in raid_postsuspend(). 4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime, and if MD_RECOVERY_FROZEN is cleared while the array is suspended, new sync_thread can start unexpected. Fix this by disallow raid_message() to change sync_thread status during suspend. Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(), and with previous fixes, the test won't hang there anymore, however, the test will still fail and complain that ext4 is corrupted. And with this patch, the test won't hang due to stop_sync_thread() or fail due to ext4 is corrupted anymore. However, there is still a deadlock related to dm-raid456 that will be fixed in following patches.

Show More

In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe inste ... In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe instead.

Show More

In the Linux kernel, the following vulnerability has been resolved: thermal: core: prevent potential string overflow The dev->id value comes from ida_alloc() so it's a number between zero and INT_MAX. If it's too high then these sprintf()s will overflow.

In the Linux kernel, the following vulnerability has been resolved: block: Fix page refcounts for unaligned buffers in __bio_release_pages() Fix an incorrect number of pages being released for buffers that do not start at the beginning of a page.

In the Linux kernel, the following vulnerability has been resolved: io_uring: Fix release of pinned pages when __io_uaddr_map fails Looking at the error path of __io_uaddr_map, if we fail after pinning the pages for any reasons, ret will be set to -EINVAL and the error handler won't properly release the pinned pages. I didn't manage to trigger it without forcing a failure, but it can happen in real life when memory is heavily fragmented.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix out_fput in iommufd_fault_alloc() As fput() calls the file->f_op->release op, where fault obj and ictx are getting released, there is no need to release these two after fput() one more time, which would result in imbalanced refcounts: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230 Call trace: refcount_warn_saturate+0x60/0x230 ... In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix out_fput in iommufd_fault_alloc() As fput() calls the file->f_op->release op, where fault obj and ictx are getting released, there is no need to release these two after fput() one more time, which would result in imbalanced refcounts: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230 Call trace: refcount_warn_saturate+0x60/0x230 (P) refcount_warn_saturate+0x60/0x230 (L) iommufd_fault_fops_release+0x9c/0xe0 [iommufd] ... VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd]) WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0 Call trace: filp_flush+0x3c/0xf0 (P) filp_flush+0x3c/0xf0 (L) __arm64_sys_close+0x34/0x98 ... imbalanced put on file reference count WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138 Call trace: __file_ref_put+0x100/0x138 (P) __file_ref_put+0x100/0x138 (L) __fput_sync+0x4c/0xd0 Drop those two lines to fix the warnings above.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: tls, fix WARNIING in __sk_msg_free A splice with MSG_SPLICE_PAGES will cause tls code to use the tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user provided pages from the msg into the msg_pl. This will loop over the msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user can also set the MORE flag to hint stack to delay sending until receiving more pages and ideally a full buffer. If the user ... In the Linux kernel, the following vulnerability has been resolved: net: tls, fix WARNIING in __sk_msg_free A splice with MSG_SPLICE_PAGES will cause tls code to use the tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user provided pages from the msg into the msg_pl. This will loop over the msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user can also set the MORE flag to hint stack to delay sending until receiving more pages and ideally a full buffer. If the user adds more pages to the msg than can fit in the msg_pl scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send the buffer anyways. What actually happens though is we abort the msg to msg_pl scatterlist setup and then because we forget to set 'full record' indicating we can no longer consume data without a send we fallthrough to the 'continue' path which will check if msg_data_left(msg) has more bytes to send and then attempts to fit them in the already full msg_pl. Then next iteration of sender doing send will encounter a full msg_pl and throw the warning in the syzbot report. To fix simply check if we have a full_record in splice code path and if not send the msg regardless of MORE flag.

Show More

In the Linux kernel, the following vulnerability has been resolved: fork: do not invoke uffd on fork if error occurs Patch series "fork: do not expose incomplete mm on fork". During fork we may place the virtual memory address space into an inconsistent state before the fork operation is complete. In addition, we may encounter an error during the fork operation that indicates that the virtual memory address space is invalidated. As a result, we should not be exposing it in any way to extern ... In the Linux kernel, the following vulnerability has been resolved: fork: do not invoke uffd on fork if error occurs Patch series "fork: do not expose incomplete mm on fork". During fork we may place the virtual memory address space into an inconsistent state before the fork operation is complete. In addition, we may encounter an error during the fork operation that indicates that the virtual memory address space is invalidated. As a result, we should not be exposing it in any way to external machinery that might interact with the mm or VMAs, machinery that is not designed to deal with incomplete state. We specifically update the fork logic to defer khugepaged and ksm to the end of the operation and only to be invoked if no error arose, and disallow uffd from observing fork events should an error have occurred. This patch (of 2): Currently on fork we expose the virtual address space of a process to userland unconditionally if uffd is registered in VMAs, regardless of whether an error arose in the fork. This is performed in dup_userfaultfd_complete() which is invoked unconditionally, and performs two duties - invoking registered handlers for the UFFD_EVENT_FORK event via dup_fctx(), and clearing down userfaultfd_fork_ctx objects established in dup_userfaultfd(). This is problematic, because the virtual address space may not yet be correctly initialised if an error arose. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. We address this by, on fork error, ensuring that we roll back state that we would otherwise expect to clean up through the event being handled by userland and perform the memory freeing duty otherwise performed by dup_userfaultfd_complete(). We do this by implementing a new function, dup_userfaultfd_fail(), which performs the same loop, only decrementing reference counts. Note that we perform mmgrab() on the parent and child mm's, however userfaultfd_ctx_put() will mmdrop() this once the reference count drops to zero, so we will avoid memory leaks correctly here.

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix reserve_cblocks counting error when out of space When a file only needs one direct_node, performing the following operations will cause the file to be unrepairable: unisoc # ./f2fs_io compress test.apk unisoc #df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.2M 100% /data unisoc # ./f2fs_io release_cblocks test.apk 924 unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 4.8M 100% /data unisoc # dd if=/ ... In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix reserve_cblocks counting error when out of space When a file only needs one direct_node, performing the following operations will cause the file to be unrepairable: unisoc # ./f2fs_io compress test.apk unisoc #df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.2M 100% /data unisoc # ./f2fs_io release_cblocks test.apk 924 unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 4.8M 100% /data unisoc # dd if=/dev/random of=file4 bs=1M count=3 3145728 bytes (3.0 M) copied, 0.025 s, 120 M/s unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 0 This is because the file has only one direct_node. After returning to -ENOSPC, reserved_blocks += ret will not be executed. As a result, the reserved_blocks at this time is still 0, which is not the real number of reserved blocks. Therefore, fsck cannot be set to repair the file. After this patch, the fsck flag will be set to fix this problem. unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot then fsck will be executed unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 924

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf: support deferring bpf_link dealloc to after RCU grace period BPF link for some program types is passed as a "context" which can be used by those BPF programs to look up additional information. E.g., for multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values. Because of this runtime dependency, when bpf_link refcnt drops to zero there could still be active BPF programs running accessing link data. This ... In the Linux kernel, the following vulnerability has been resolved: bpf: support deferring bpf_link dealloc to after RCU grace period BPF link for some program types is passed as a "context" which can be used by those BPF programs to look up additional information. E.g., for multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values. Because of this runtime dependency, when bpf_link refcnt drops to zero there could still be active BPF programs running accessing link data. This patch adds generic support to defer bpf_link dealloc callback to after RCU GP, if requested. This is done by exposing two different deallocation callbacks, one synchronous and one deferred. If deferred one is provided, bpf_link_free() will schedule dealloc_deferred() callback to happen after RCU GP. BPF is using two flavors of RCU: "classic" non-sleepable one and RCU tasks trace one. The latter is used when sleepable BPF programs are used. bpf_link_free() accommodates that by checking underlying BPF program's sleepable flag, and goes either through normal RCU GP only for non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP (taking into account rcu_trace_implies_rcu_gp() optimization), if BPF program is sleepable. We use this for multi-kprobe and multi-uprobe links, which dereference link during program run. We also preventively switch raw_tp link to use deferred dealloc callback, as upcoming changes in bpf-next tree expose raw_tp link data (specifically, cookie value) to BPF program at runtime as well.

Show More

In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, t ... In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix the lifetime of the bo cursor memory The cleanup can be dispatched while the atomic update is still active, which means that the memory acquired in the atomic update needs to not be invalidated by the cleanup. The buffer objects in vmw_plane_state instead of using the builtin map_and_cache were trying to handle the lifetime of the mapped memory themselves, leading to crashes. Use the map_and_cache instead of t ... In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix the lifetime of the bo cursor memory The cleanup can be dispatched while the atomic update is still active, which means that the memory acquired in the atomic update needs to not be invalidated by the cleanup. The buffer objects in vmw_plane_state instead of using the builtin map_and_cache were trying to handle the lifetime of the mapped memory themselves, leading to crashes. Use the map_and_cache instead of trying to manage the lifetime of the buffer objects held by the vmw_plane_state. Fixes kernel oops'es in IGT's kms_cursor_legacy forked-bo.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: initialize num_q_vectors for MSI/INTx interrupts When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: ASSERT when failing to find index by plane/stream id [WHY] find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns an array index and they return -1 when not found; however, -1 is not a valid index number. [HOW] When this happens, call ASSERT(), and return a positive number (which is fewer than callers' array size) instead. This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Cover ... In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: ASSERT when failing to find index by plane/stream id [WHY] find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns an array index and they return -1 when not found; however, -1 is not a valid index number. [HOW] When this happens, call ASSERT(), and return a positive number (which is fewer than callers' array size) instead. This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.

Show More

In the Linux kernel, the following vulnerability has been resolved: btrfs: always do the basic checks for btrfs_qgroup_inherit structure [BUG] Syzbot reports the following regression detected by KASAN: BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171 CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Hardware name: Google Google Co ... In the Linux kernel, the following vulnerability has been resolved: btrfs: always do the basic checks for btrfs_qgroup_inherit structure [BUG] Syzbot reports the following regression detected by KASAN: BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171 CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922 btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382 create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875 btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340 btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422 btrfs_ioctl+0x99e/0xc60 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcbf1992509 RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509 RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660 R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e </TASK> And it also pinned it down to commit b5357cb268c4 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled"). [CAUSE] That offending commit skips the whole qgroup inherit check if qgroup is not enabled. But that also skips the very basic checks like num_ref_copies/num_excl_copies and the structure size checks. Meaning if a qgroup enable/disable race is happening at the background, and we pass a btrfs_qgroup_inherit structure when the qgroup is disabled, the check would be completely skipped. Then at the time of transaction commitment, qgroup is re-enabled and btrfs_qgroup_inherit() is going to use the incorrect structure and causing the above KASAN error. [FIX] Make btrfs_qgroup_check_inherit() only skip the source qgroup checks. So that even if invalid btrfs_qgroup_inherit structure is passed in, we can still reject invalid ones no matter if qgroup is enabled or not. Furthermore we do already have an extra safety inside btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources, so even if we only skip the qgroup source check we're still safe.

Show More

In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: prevent leak of left-over IRQ on unbind Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ") also removed the call to free_irq() in pci_remove(), leading to a leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove() when unbinding the driver from the device remove_proc_entry: removing non-empty directory 'irq/136', leaking at least 'firewire_ohci' Call Trace: ? remove_proc_e ... In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: prevent leak of left-over IRQ on unbind Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ") also removed the call to free_irq() in pci_remove(), leading to a leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove() when unbinding the driver from the device remove_proc_entry: removing non-empty directory 'irq/136', leaking at least 'firewire_ohci' Call Trace: ? remove_proc_entry+0x19c/0x1c0 ? __warn+0x81/0x130 ? remove_proc_entry+0x19c/0x1c0 ? report_bug+0x171/0x1a0 ? console_unlock+0x78/0x120 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? remove_proc_entry+0x19c/0x1c0 unregister_irq_proc+0xf4/0x120 free_desc+0x3d/0xe0 ? kfree+0x29f/0x2f0 irq_free_descs+0x47/0x70 msi_domain_free_locked.part.0+0x19d/0x1d0 msi_domain_free_irqs_all_locked+0x81/0xc0 pci_free_msi_irqs+0x12/0x40 pci_disable_msi+0x4c/0x60 pci_remove+0x9d/0xc0 [firewire_ohci 01b483699bebf9cb07a3d69df0aa2bee71db1b26] pci_device_remove+0x37/0xa0 device_release_driver_internal+0x19f/0x200 unbind_store+0xa1/0xb0 remove irq with devm_free_irq() before pci_disable_msi() also remove it in fail_msi: of pci_probe() as this would lead to an identical leak

Show More

In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common In order to set the rate range of a hw sunxi_ccu_probe calls hw_to_ccu_common() assuming all entries in desc->ccu_clks are contained in a ccu_common struct. This assumption is incorrect and, in consequence, causes invalid pointer de-references. Remove the faulty call. Instead, add one more loop that iterates over the ccu_clks and sets the rate range, if r ... In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common In order to set the rate range of a hw sunxi_ccu_probe calls hw_to_ccu_common() assuming all entries in desc->ccu_clks are contained in a ccu_common struct. This assumption is incorrect and, in consequence, causes invalid pointer de-references. Remove the faulty call. Instead, add one more loop that iterates over the ccu_clks and sets the rate range, if required.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Define the __io_aw() hook as mmiowb() Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may ... In the Linux kernel, the following vulnerability has been resolved: LoongArch: Define the __io_aw() hook as mmiowb() Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation." The mmio in radeon_ring_commit() is protected by a mutex rather than a spinlock, but in the mutex fastpath it behaves similar to spinlock. We can add mmiowb() calls in the radeon driver but the maintainer says he doesn't like such a workaround, and radeon is not the only example of mutex protected mmio. So we should extend the mmiowb tracking system from spinlock to mutex, and maybe other locking primitives. This is not easy and error prone, so we solve it in the architectural code, by simply defining the __io_aw() hook as mmiowb(). And we no longer need to override queued_spin_unlock() so use the generic definition. Without this, we get such an error when run 'glxgears' on weak ordering architectures such as LoongArch: radeon 0000:04:00.0: ring 0 stalled for more than 10324msec radeon 0000:04:00.0: ring 3 stalled for more than 10240msec radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3) radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)

Show More

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability in the Python backend, where an attacker could cause a remote code execution by manipulating the model name parameter in the model control APIs. A successful exploit of this vulnerability might lead to remote code execution, denial of service, information disclosure, and data tampering.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause an out-of-bounds write through a specially crafted input. A successful exploit of this vulnerability might lead to denial of service.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause memory corruption by identifying and accessing the shared memory region used by the Python backend. A successful exploit of this vulnerability might lead to denial of service.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause a denial of service by loading a misconfigured model. A successful exploit of this vulnerability might lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the sam ... In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space.

Show More

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer Fix invalid dereferencing of indirect CCW data pointer in dasd_eckd_dump_sense() that leads to a kernel panic in error cases. When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer does not contain the data address itself but a pointer to the IDAL. This needs to be translated from physical to virtual as well before using it. This dereferencing ... In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer Fix invalid dereferencing of indirect CCW data pointer in dasd_eckd_dump_sense() that leads to a kernel panic in error cases. When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer does not contain the data address itself but a pointer to the IDAL. This needs to be translated from physical to virtual as well before using it. This dereferencing is also used for dasd_page_cache and also fixed although it is very unlikely that this code path ever gets used.

Show More

In the Linux kernel, the following vulnerability has been resolved: ima: fix reference leak in asymmetric_verify() Don't leak a reference to the key if its algorithm is unknown.