Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns ... In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.

Show More

In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not vali ... In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [ ... In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105 ... When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable. This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog, but jit failed due to FAULT_INJECTION. As a result, incorrectly treats the program as valid, when the program runs it calls `__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).

Show More

In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers betwe ... In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.)

Show More

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elemen ... In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace.

Show More

In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cooki ... In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: make hfsc_qlen_notify() idempotent hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life: 1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it. 2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() ... In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: make hfsc_qlen_notify() idempotent hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life: 1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it. 2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.

Show More

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not double dequeue a configuration request Some of our devices crash in tb_cfg_request_dequeue(): general protection fault, probably for non-canonical address 0xdead000000000122 CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65 RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0 Call Trace: <TASK> ? tb_cfg_request_dequeue+0x2d/0xa0 tb_cfg_request_work+0x33/0x80 worker_thread+0x386/0x8f0 kthread+0xed/0 ... In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not double dequeue a configuration request Some of our devices crash in tb_cfg_request_dequeue(): general protection fault, probably for non-canonical address 0xdead000000000122 CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65 RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0 Call Trace: <TASK> ? tb_cfg_request_dequeue+0x2d/0xa0 tb_cfg_request_work+0x33/0x80 worker_thread+0x386/0x8f0 kthread+0xed/0x110 ret_from_fork+0x38/0x50 ret_from_fork_asm+0x1b/0x30 The circumstances are unclear, however, the theory is that tb_cfg_request_work() can be scheduled twice for a request: first time via frame.callback from ring_work() and second time from tb_cfg_request(). Both times kworkers will execute tb_cfg_request_dequeue(), which results in double list_del() from the ctl->request_queue (the list poison deference hints at it: 0xdead000000000122). Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE bit set.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARN() in get_bpf_raw_tp_regs syzkaller reported an issue: WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 Modules linked in: CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 00 ... In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARN() in get_bpf_raw_tp_regs syzkaller reported an issue: WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 Modules linked in: CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005 RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004 R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900 FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline] bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline] bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline] mmap_read_trylock include/linux/mmap_lock.h:204 [inline] stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline] bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline] bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 Tracepoint like trace_mmap_lock_acquire_returned may cause nested call as the corner case show above, which will be resolved with more general method in the future. As a result, WARN_ON_ONCE will be triggered. As Alexei suggested, remove the WARN_ON_ONCE first.

Show More

In the Linux kernel, the following vulnerability has been resolved: pinctrl: at91: Fix possible out-of-boundary access at91_gpio_probe() doesn't check that given OF alias is not available or something went wrong when trying to get it. This might have consequences when accessing gpio_chips array with that value as an index. Note, that BUG() can be compiled out and hence won't actually perform the required checks.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath11k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during ... In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath11k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath11k_mac_op_remove_interface(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath11k_mac_op_remove_interface() can execute normally. Call trace: __list_del_entry_valid_or_report+0xb8/0xd0 ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k] drv_remove_interface+0x48/0x194 [mac80211] ieee80211_do_stop+0x6e0/0x844 [mac80211] ieee80211_stop+0x44/0x17c [mac80211] __dev_close_many+0xac/0x150 __dev_change_flags+0x194/0x234 dev_change_flags+0x24/0x6c devinet_ioctl+0x3a0/0x670 inet_ioctl+0x200/0x248 sock_do_ioctl+0x60/0x118 sock_ioctl+0x274/0x35c __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x114 ... Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

Show More

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When Git asks for credentials via a terminal prompt (i.e. without using any credential helper), it prints out the host name for which the user is expected to provide a username and/or a password. At this stage, any URL-encoded parts have been decoded already, and are printed verbatim. This allows attackers to craft URLs that contai ... Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When Git asks for credentials via a terminal prompt (i.e. without using any credential helper), it prints out the host name for which the user is expected to provide a username and/or a password. At this stage, any URL-encoded parts have been decoded already, and are printed verbatim. This allows attackers to craft URLs that contain ANSI escape sequences that the terminal interpret to confuse users e.g. into providing passwords for trusted Git hosting sites when in fact they are then sent to untrusted sites that are under the attacker's control. This issue has been patch via commits `7725b81` and `c903985` which are included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

Show More

An issue was discovered in lxml before 4.2.5. lxml/html/clean.py in the lxml.html.clean module does not remove javascript: URLs that use escaping, allowing a remote attacker to conduct XSS attacks, as demonstrated by "j a v a s c r i p t:" in Internet Explorer. This is a similar issue to CVE-2014-3146.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Git defines a line-based protocol that is used to exchange information between Git and Git credential helpers. Some ecosystems (most notably, .NET and node.js) interpret single Carriage Return characters as newlines, which renders the protections against CVE-2020-5260 incomplete for credential helpers that treat Carriage Returns in ... Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Git defines a line-based protocol that is used to exchange information between Git and Git credential helpers. Some ecosystems (most notably, .NET and node.js) interpret single Carriage Return characters as newlines, which renders the protections against CVE-2020-5260 incomplete for credential helpers that treat Carriage Returns in this way. This issue has been addressed in commit `b01b9b8` which is included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.

In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.

Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.

A vulnerability was discovered in how p2p/p2p_pd.c in wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision discovery requests. It could result in denial of service or other impact (potentially execution of arbitrary code), for an attacker within radio range.

An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirecto ... An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).

Show More

There's a flaw in Python 3's pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.

An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.

A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.

An XSS vulnerability was discovered in python-lxml's clean module versions before 4.6.3. When disabling the safe_attrs_only and forms arguments, the Cleaner class does not remove the formaction attribute allowing for JS to bypass the sanitizer. A remote attacker could exploit this flaw to run arbitrary JS code on users who interact with incorrectly sanitized HTML. This issue is patched in lxml 4.6.3.

decompress_gunzip.c in BusyBox through 1.32.1 mishandles the error bit on the huft_build result pointer, with a resultant invalid free or segmentation fault, via malformed gzip data.

The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result i ... The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.

Show More

xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.

In OpenSSH 7.9, scp.c in the scp client allows remote SSH servers to bypass intended access restrictions via the filename of . or an empty filename. The impact is modifying the permissions of the target directory on the client side.

procps-ng before version 3.3.15 is vulnerable to a stack buffer overflow in pgrep. This vulnerability is mitigated by FORTIFY, as it involves strncat() to a stack-allocated string. When pgrep is compiled with FORTIFY (as on Red Hat Enterprise Linux and Fedora), the impact is limited to a crash.

OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c.

The RSVP parser in tcpdump before 4.9.3 has a buffer over-read in print-rsvp.c:rsvp_obj_print().

The xmlNextChar function in libxml2 before 2.9.4 allows remote attackers to cause a denial of service (heap-based buffer over-read) via a crafted XML document.

A XSS vulnerability was discovered in python-lxml's clean module. The module's parser didn't properly imitate browsers, which caused different behaviors between the sanitizer and the user's page. A remote attacker could exploit this flaw to run arbitrary HTML/JS code.

In the Linux kernel, the following vulnerability has been resolved: xenbus: Use kref to track req lifetime Marek reported seeing a NULL pointer fault in the xenbus_thread callstack: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: e030:__wake_up_common+0x4c/0x180 Call Trace: <TASK> __wake_up_common_lock+0x82/0xd0 process_msg+0x18e/0x2f0 xenbus_thread+0x165/0x1c0 process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a thin wrapper around wake_up(), or xenb ... In the Linux kernel, the following vulnerability has been resolved: xenbus: Use kref to track req lifetime Marek reported seeing a NULL pointer fault in the xenbus_thread callstack: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: e030:__wake_up_common+0x4c/0x180 Call Trace: <TASK> __wake_up_common_lock+0x82/0xd0 process_msg+0x18e/0x2f0 xenbus_thread+0x165/0x1c0 process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems like it was xs_wake_up() in this case. It seems like req may have woken up the xs_wait_for_reply(), which kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed data. Linux Device Drivers 2nd edition states: "Normally, a wake_up call can cause an immediate reschedule to happen, meaning that other processes might run before wake_up returns." ... which would match the behaviour observed. Change to keeping two krefs on each request. One for the caller, and one for xenbus_thread. Each will kref_put() when finished, and the last will free it. This use of kref matches the description in Documentation/core-api/kref.rst

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Add job to pending list if the reset was skipped When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically ... In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Add job to pending list if the reset was skipped When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically freed through `free_job()`. Consequently, when we skip the reset and keep the job running, the job won't be freed when it finally completes. This situation leads to a memory leak, as exposed in [1] and [2]. Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active"), this patch ensures the job is put back on the pending list when extending the timeout.

Show More

In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_deactivate() idempotent Alan reported a NULL pointer dereference in htb_next_rb_node() after we made htb_qlen_notify() idempotent. It turns out in the following case it introduced some regression: htb_dequeue_tree(): |-> fq_codel_dequeue() |-> qdisc_tree_reduce_backlog() |-> htb_qlen_notify() |-> htb_deactivate() |-> htb_next_rb_node() |-> htb_deactivate() For htb_next_rb_node(), af ... In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_deactivate() idempotent Alan reported a NULL pointer dereference in htb_next_rb_node() after we made htb_qlen_notify() idempotent. It turns out in the following case it introduced some regression: htb_dequeue_tree(): |-> fq_codel_dequeue() |-> qdisc_tree_reduce_backlog() |-> htb_qlen_notify() |-> htb_deactivate() |-> htb_next_rb_node() |-> htb_deactivate() For htb_next_rb_node(), after calling the 1st htb_deactivate(), the clprio[prio]->ptr could be already set to NULL, which means htb_next_rb_node() is vulnerable here. For htb_deactivate(), although we checked qlen before calling it, in case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again which triggers the warning inside. To fix the issues here, we need to: 1) Make htb_deactivate() idempotent, that is, simply return if we already call it before. 2) Make htb_next_rb_node() safe against ptr==NULL. Many thanks to Alan for testing and for the reproducer.

Show More

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu read protection for procfs content When the procfs content is generated for a bcm_op which is in the process to be removed the procfs output might show unreliable data (UAF). As the removal of bcm_op's is already implemented with rcu handling this patch adds the missing rcu_read_lock() and makes sure the list entries are properly removed under rcu protection.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking for bcm_op runtime updates The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via hrtimer. The content and also the length of the sequence can be changed resp reduced at runtime where the 'currframe' counter is then set to zero. Although this appeared to be a safe operation the updates of 'currframe' can be triggered from user space and hrtimer context in bcm_can_tx(). Anderson Nascime ... In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking for bcm_op runtime updates The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via hrtimer. The content and also the length of the sequence can be changed resp reduced at runtime where the 'currframe' counter is then set to zero. Although this appeared to be a safe operation the updates of 'currframe' can be triggered from user space and hrtimer context in bcm_can_tx(). Anderson Nascimento created a proof of concept that triggered a KASAN slab-out-of-bounds read access which can be prevented with a spin_lock_bh. At the rework of bcm_can_tx() the 'count' variable has been moved into the protected section as this variable can be modified from both contexts too.

Show More

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma: Add missing locking Recent kernels complain about a missing lock in k3-udma.c when the lock validator is enabled: [ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238 [ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28 [ 4.144867] Hardware name: pp-v12 (DT) [ 4.148648] Workqueue: events udma_check_tx_completion [ ... In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma: Add missing locking Recent kernels complain about a missing lock in k3-udma.c when the lock validator is enabled: [ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238 [ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28 [ 4.144867] Hardware name: pp-v12 (DT) [ 4.148648] Workqueue: events udma_check_tx_completion [ 4.153841] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.160834] pc : udma_start.isra.0+0x34/0x238 [ 4.165227] lr : udma_start.isra.0+0x30/0x238 [ 4.169618] sp : ffffffc083cabcf0 [ 4.172963] x29: ffffffc083cabcf0 x28: 0000000000000000 x27: ffffff800001b005 [ 4.180167] x26: ffffffc0812f0000 x25: 0000000000000000 x24: 0000000000000000 [ 4.187370] x23: 0000000000000001 x22: 00000000e21eabe9 x21: ffffff8000fa0670 [ 4.194571] x20: ffffff8001b6bf00 x19: ffffff8000fa0430 x18: ffffffc083b95030 [ 4.201773] x17: 0000000000000000 x16: 00000000f0000000 x15: 0000000000000048 [ 4.208976] x14: 0000000000000048 x13: 0000000000000000 x12: 0000000000000001 [ 4.216179] x11: ffffffc08151a240 x10: 0000000000003ea1 x9 : ffffffc08046ab68 [ 4.223381] x8 : ffffffc083cabac0 x7 : ffffffc081df3718 x6 : 0000000000029fc8 [ 4.230583] x5 : ffffffc0817ee6d8 x4 : 0000000000000bc0 x3 : 0000000000000000 [ 4.237784] x2 : 0000000000000000 x1 : 00000000001fffff x0 : 0000000000000000 [ 4.244986] Call trace: [ 4.247463] udma_start.isra.0+0x34/0x238 [ 4.251509] udma_check_tx_completion+0xd0/0xdc [ 4.256076] process_one_work+0x244/0x3fc [ 4.260129] process_scheduled_works+0x6c/0x74 [ 4.264610] worker_thread+0x150/0x1dc [ 4.268398] kthread+0xd8/0xe8 [ 4.271492] ret_from_fork+0x10/0x20 [ 4.275107] irq event stamp: 220 [ 4.278363] hardirqs last enabled at (219): [<ffffffc080a27c7c>] _raw_spin_unlock_irq+0x38/0x50 [ 4.287183] hardirqs last disabled at (220): [<ffffffc080a1c154>] el1_dbg+0x24/0x50 [ 4.294879] softirqs last enabled at (182): [<ffffffc080037e68>] handle_softirqs+0x1c0/0x3cc [ 4.303437] softirqs last disabled at (177): [<ffffffc080010170>] __do_softirq+0x1c/0x28 [ 4.311559] ---[ end trace 0000000000000000 ]--- This commit adds the missing locking.

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: disable napi on driver removal A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name ... In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: disable napi on driver removal A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org).

Show More

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix memory leak in error handling path of idxd_alloc Memory allocated for idxd is not freed if an error occurs during idxd_alloc(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error.