Vulnerabilities (CVE)

Microstrategy Web 10.4 exposes the JVM configuration, CPU architecture, installation folder, and other information through the URL /MicroStrategyWS/happyaxis.jsp. An attacker could use this vulnerability to learn more about the environment the application is running in. This issue has been mitigated in all versions of the product 11.0 and higher.

An issue was discovered on Bell HomeHub 3000 SG48222070 devices. Remote authenticated users can retrieve the serial number via cgi/json-req - this is an information leak because the serial number is intended to prove an actor's physical access to the device.

TP-Link cloud cameras through 2020-02-09 allow remote attackers to bypass authentication and obtain sensitive information via vectors involving a Wi-Fi session with GPS enabled, aka CNVD-2020-04855.

httpRpmFs in WebCLI in Wind River VxWorks 5.5 through 7 SR0640 has no check for an escape from the web root.

Improper access control when using mmap with the kgsl driver with a special offset value that can be provided to map the memstore of the GPU to user space in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

Part of RPM region was not protected from xblSec itself due to improper policy and leads to unprivileged access in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking

u'Lack of handling unexpected control messages while encryption was in progress can terminate the connection and thus leading to a DoS' in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8053, APQ8076, MDM9640, MDM9650, MSM8905, MSM8917, MSM8937, MSM8940, MSM8953, QCA6174A, QCA9886, QCM2150, QM215, SDM429, SDM439, SDM450, SDM632

JsLink in Webswing before 2.6.12 LTS, and 2.7.x and 20.x before 20.1, allows remote code execution.

In qutebrowser versions less than 1.11.1, reloading a page with certificate errors shows a green URL. After a certificate error was overridden by the user, qutebrowser displays the URL as yellow (colors.statusbar.url.warn.fg). However, when the affected website was subsequently loaded again, the URL was mistakenly displayed as green (colors.statusbar.url.success_https). While the user already has seen a certificate error prompt at this point (or set content.ssl_strict to false, which is not reco ... In qutebrowser versions less than 1.11.1, reloading a page with certificate errors shows a green URL. After a certificate error was overridden by the user, qutebrowser displays the URL as yellow (colors.statusbar.url.warn.fg). However, when the affected website was subsequently loaded again, the URL was mistakenly displayed as green (colors.statusbar.url.success_https). While the user already has seen a certificate error prompt at this point (or set content.ssl_strict to false, which is not recommended), this could still provide a false sense of security. This has been fixed in 1.11.1 and 1.12.0. All versions of qutebrowser are believed to be affected, though versions before v0.11.x couldn't be tested. Backported patches for older versions (greater than or equal to 1.4.0 and less than or equal to 1.10.2) are available, but no further releases are planned.

Show More

Actions Http-Client (NPM @actions/http-client) before version 1.0.8 can disclose Authorization headers to incorrect domain in certain redirect scenarios. The conditions in which this happens are if consumers of the http-client: 1. make an http request with an authorization header 2. that request leads to a redirect (302) and 3. the redirect url redirects to another domain or hostname Then the authorization header will get passed to the other domain. The problem is fixed in version 1.0.8.

Electron-Cash-SLP before version 3.6.2 has a vulnerability. All token creators that use the "Mint Tool" feature of the Electron Cash SLP Edition are at risk of sending the minting authority baton to the wrong SLP address. Sending the mint baton to the wrong address will give another party the ability to issue new tokens or permanently destroy future minting capability. This is fixed version 3.6.2.

GitLab EE/CE 9.0 to 12.9 allows a maintainer to modify other maintainers' pipeline trigger descriptions within the same project.

GitLab EE/CE 11.10 to 12.9 is leaking information on restricted CI pipelines metrics to unauthorized users.

GitLab EE/CE 8.11 to 12.9 is leaking information on Issues opened in a public project and then moved to a private project through Web-UI and GraphQL API.

GitLab EE/CE 10.8 to 12.9 is leaking metadata and comments on vulnerabilities to unauthorized users on the vulnerability feedback page.

GitLab EE/CE 8.11 through 12.9.1 allows blocked users to pull/push docker images.

Arm Mbed TLS before 2.16.5 allows attackers to obtain sensitive information (an RSA private key) by measuring cache usage during an import.

An issue was discovered in IPFS (aka go-ipfs) 0.4.23. An attacker can generate ephemeral identities (Sybils) and leverage the IPFS connection management reputation system to poison other nodes' routing tables, eclipsing the nodes that are the target of the attack from the rest of the network. Later versions, in particular go-ipfs 0.7, mitigate this.

An issue was discovered in Avast Antivirus before 20. The aswTask RPC endpoint for the TaskEx library in the Avast Service (AvastSvc.exe) allows attackers to launch the Repair App RPC call from a Low Integrity process.

An issue was discovered in Avast Antivirus before 20. The aswTask RPC endpoint for the TaskEx library in the Avast Service (AvastSvc.exe) allows attackers to trigger a reboot via RPC from a Low Integrity process.

An issue was discovered in Avast Antivirus before 20. The aswTask RPC endpoint for the TaskEx library in the Avast Service (AvastSvc.exe) allows attackers to trigger a shutdown via RPC from a Low Integrity process via TempShutDownMachine.

An issue was discovered in Avast Antivirus before 20. The aswTask RPC endpoint for the TaskEx library in the Avast Service (AvastSvc.exe) allows attackers to achieve Local Privilege Escalation (LPE) via RPC.

An issue was discovered in Avast Antivirus before 20. The aswTask RPC endpoint for the TaskEx library in the Avast Service (AvastSvc.exe) allows attackers to achieve Arbitrary File Deletion from Avast Program Path via RPC, when Self Defense is Enabled.

Zulip Desktop before 5.0.0 improperly uses shell.openExternal and shell.openItem with untrusted content, leading to remote code execution.

An issue was discovered on Samsung mobile devices with P(9.0) software. Attackers can bypass Factory Reset Protection (FRP) via AppTray. The Samsung ID is SVE-2019-16192 (January 2020).

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. Kernel stack addresses are leaked to userspace. The Samsung ID is SVE-2019-16161 (January 2020).

An issue was discovered on Samsung mobile devices with P(9.0) software. Gallery leaks cached data. The Samsung IDs are SVE-2019-16010, SVE-2019-16011, SVE-2019-16012 (January 2020).

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (Exynos 9610 chipsets) software. There is an arbitrary kfree in the vipx and vertex drivers. The Samsung ID is SVE-2019-16294 (February 2020).

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. Attackers can bypass Factory Reset Protection (FRP) via a SIM card. The Samsung ID is SVE-2019-16193 (February 2020).

An issue was discovered on Samsung mobile devices with P(9.0) software. Attackers can view notifications on the lock screen via Routines. The Samsung ID is SVE-2019-15074 (February 2020).

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) software. Attackers can view notifications by entering many PINs in Lockdown mode. The Samsung ID is SVE-2019-16590 (March 2020).

lix through 15.8.7 allows man-in-the-middle attackers to execute arbitrary code by modifying the HTTP client-server data stream so that the Location header is associated with attacker-controlled executable content in the postDownload field.

An elevation of privilege in Vesta Control Panel through 0.9.8-26 allows an attacker to gain root system access from the admin account via v-change-user-password (aka the user password change script).

Red Hat CloudForms 4.7 and 5 is affected by a role-based privilege escalation flaw. An attacker with EVM-Operator group can perform actions restricted only to EVM-Super-administrator group, leads to, exporting or importing administrator files.

A flaw was found in the Linux Kernel before 5.8-rc1 in the prctl() function, where it can be used to enable indirect branch speculation after it has been disabled. This call incorrectly reports it as being 'force disabled' when it is not and opens the system to Spectre v2 attacks. The highest threat from this vulnerability is to confidentiality.

A flaw was found in the Linux kernel before 5.8-rc1 in the implementation of the Enhanced IBPB (Indirect Branch Prediction Barrier). The IBPB mitigation will be disabled when STIBP is not available or when the Enhanced Indirect Branch Restricted Speculation (IBRS) is available. This flaw allows a local attacker to perform a Spectre V2 style attack when this configuration is active. The highest threat from this vulnerability is to confidentiality.

A logic bug flaw was found in Linux kernel before 5.8-rc1 in the implementation of SSBD. A bug in the logic handling allows an attacker with a local account to disable SSBD protection during a context switch when additional speculative execution mitigations are in place. This issue was introduced when the per task/process conditional STIPB switching was added on top of the existing SSBD switching. The highest threat from this vulnerability is to confidentiality.

A flaw was found in the nova_libvirt container provided by the Red Hat OpenStack Platform 16, where it does not have SELinux enabled. This flaw causes sVirt, an important isolation mechanism, to be disabled for all running virtual machines.

In Octopus Deploy before 2020.1.5, for customers running on-premises Active Directory linked to their Octopus server, an authenticated user can leverage a bug to escalate privileges.

HashiCorp Vault and Vault Enterprise versions 0.11.0 through 1.3.3 may, under certain circumstances, have existing nested-path policies grant access to Namespaces created after-the-fact. Fixed in 1.3.4.