Vulnerabilities (CVE)

A CWE-669: Incorrect Resource Transfer Between Spheres vulnerability exists that could allow unauthorized access when an attacker uses cross-domain attacks. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)

A vulnerability in the web-based management interface of Cisco Unified Contact Center Management Portal (Unified CCMP) and Cisco Unified Contact Center Domain Manager (Unified CCDM) could allow an authenticated, remote attacker to elevate their privileges to Administrator. This vulnerability is due to the lack of server-side validation of user permissions. An attacker could exploit this vulnerability by submitting a crafted HTTP request to a vulnerable system. A successful exploit could allow th ... A vulnerability in the web-based management interface of Cisco Unified Contact Center Management Portal (Unified CCMP) and Cisco Unified Contact Center Domain Manager (Unified CCDM) could allow an authenticated, remote attacker to elevate their privileges to Administrator. This vulnerability is due to the lack of server-side validation of user permissions. An attacker could exploit this vulnerability by submitting a crafted HTTP request to a vulnerable system. A successful exploit could allow the attacker to create Administrator accounts. With these accounts, the attacker could access and modify telephony and user resources across all the Unified platforms that are associated to the vulnerable Cisco Unified CCMP. To successfully exploit this vulnerability, an attacker would need valid Advanced User credentials.

Show More

An issue was discovered in Softwarebuero Zauner ARC 4.2.0.4., that allows attackers to escalate privileges within the application, since all permission checks are done client-side, not server-side.

In MB connect line mymbCONNECT24, mbCONNECT24 and Helmholz myREX24 and myREX24.virtual in all versions through v2.11.2 an authenticated attacker can change the password of his account into a new password that violates the password policy by intercepting and modifying the request that is send to the server.

Kaseya VSA before 9.5.7 allows attackers to bypass the 2FA requirement. The need to use 2FA for authentication in enforce client-side instead of server-side and can be bypassed using a local proxy. Thus rendering 2FA useless. Detailed description --- During the login process, after the user authenticates with username and password, the server sends a response to the client with the booleans MFARequired and MFAEnroled. If the attacker has obtained a password of a user and used an intercepting pro ... Kaseya VSA before 9.5.7 allows attackers to bypass the 2FA requirement. The need to use 2FA for authentication in enforce client-side instead of server-side and can be bypassed using a local proxy. Thus rendering 2FA useless. Detailed description --- During the login process, after the user authenticates with username and password, the server sends a response to the client with the booleans MFARequired and MFAEnroled. If the attacker has obtained a password of a user and used an intercepting proxy (e.g. Burp Suite) to change the value of MFARequered from True to False, there is no prompt for the second factor, but the user is still logged in.

Show More

Firefox used to cache the last filename used for printing a file. When generating a filename for printing, Firefox usually suggests the web page title. The caching and suggestion techniques combined may have lead to the title of a website visited during private browsing mode being stored on disk. This vulnerability affects Firefox < 89.

In Publify, 9.0.0.pre1 to 9.2.4 are vulnerable to Improper Access Control. “guest” role users can self-register even when the admin does not allow. This happens due to front-end restriction only.

The HM Multiple Roles WordPress plugin before 1.3 does not have any access control to prevent low privilege users to set themselves as admin via their profile page

A CWE-669: Incorrect Resource Transfer Between Spheres vulnerability exists that could cause data exfiltration and unauthorized access when accessing a malicious website. Affected Product: spaceLYnk (V2.6.1 and prior), Wiser for KNX (V2.6.1 and prior), fellerLYnk (V2.6.1 and prior)

Dell Unisphere for PowerMax versions prior to 9.2.1.6 contain an Authorization Bypass Vulnerability. A local authenticated malicious user with monitor role may exploit this vulnerability to perform unauthorized actions.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a user to impersonate another user on the system due to incorrectly updating the session identifier. IBM X-Force ID: 198191.

V6.0.10P2T2 and V6.0.10P2T5 of F6x2W product are impacted by Information leak vulnerability. Unauthorized users could log in directly to obtain page information without entering a verification code.

The Eat Spray Love mobile app for both iOS and Android contains logic that allows users to bypass authentication and retrieve or modify information that they would not normally have access to.

DNN (formerly DotNetNuke) through 9.4.4 has Insecure Permissions.

In SOOIL Developments Co., Ltd Diabecare RS, AnyDana-i and AnyDana-A, a client-side control vulnerability in the insulin pump and its AnyDana-i and AnyDana-A mobile applications allows physically proximate attackers to bypass checks for default PINs via Bluetooth Low Energy.

In tangro Business Workflow before 1.18.1, a user's profile contains some items that are greyed out and thus are not intended to be edited by regular users. However, this restriction is only applied client-side. Manipulating any of the greyed-out values in requests to /api/profile is not prohibited server-side.

Stratodesk NoTouch Center before 4.4.68 is affected by: Incorrect Access Control. A low privileged user on the platform, for example a user with "helpdesk" privileges, can perform privileged operations including adding a new administrator to the platform via the easyadmin/user/submitCreateTCUser.do page.

The affected versions of S+ Operations (version 2.1 SP1 and earlier) used an approach for user authentication which relies on validation at the client node (client-side authentication). This is not as secure as having the server validate a client application before allowing a connection. Therefore, if the network communication or endpoints for these applications are not protected, unauthorized actors can bypass authentication and make unauthorized connections to the server application.

An elevation of privilege vulnerability exists when the Windows Print Spooler service improperly allows arbitrary writing to the file system, aka 'Windows Print Spooler Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-1070.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vul ... An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

Show More

containerd is an industry-standard container runtime and is available as a daemon for Linux and Windows. In containerd before versions 1.3.9 and 1.4.3, the containerd-shim API is improperly exposed to host network containers. Access controls for the shim’s API socket verified that the connecting process had an effective UID of 0, but did not otherwise restrict access to the abstract Unix domain socket. This would allow malicious containers running in the same network namespace as the shim, with ... containerd is an industry-standard container runtime and is available as a daemon for Linux and Windows. In containerd before versions 1.3.9 and 1.4.3, the containerd-shim API is improperly exposed to host network containers. Access controls for the shim’s API socket verified that the connecting process had an effective UID of 0, but did not otherwise restrict access to the abstract Unix domain socket. This would allow malicious containers running in the same network namespace as the shim, with an effective UID of 0 but otherwise reduced privileges, to cause new processes to be run with elevated privileges. This vulnerability has been fixed in containerd 1.3.9 and 1.4.3. Users should update to these versions as soon as they are released. It should be noted that containers started with an old version of containerd-shim should be stopped and restarted, as running containers will continue to be vulnerable even after an upgrade. If you are not providing the ability for untrusted users to start containers in the same network namespace as the shim (typically the "host" network namespace, for example with docker run --net=host or hostNetwork: true in a Kubernetes pod) and run with an effective UID of 0, you are not vulnerable to this issue. If you are running containers with a vulnerable configuration, you can deny access to all abstract sockets with AppArmor by adding a line similar to deny unix addr=@**, to your policy. It is best practice to run containers with a reduced set of privileges, with a non-zero UID, and with isolated namespaces. The containerd maintainers strongly advise against sharing namespaces with the host. Reducing the set of isolation mechanisms used for a container necessarily increases that container's privilege, regardless of what container runtime is used for running that container.

Show More

In Red Hat CloudForms 4.7 and 5, the read only widgets can be edited by inspecting the forms and dropping the disabled attribute from the fields since there is no server-side validation. This business logic flaw violate the expected behavior.

TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows e ... TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field.

Show More

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be ... D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field.

Show More

Compal CH7465LG CH7465LG-NCIP-6.12.18.24-5p8-NOSH devices have Incorrect Access Control because of Improper Input Validation. The attacker can send a maliciously modified POST (HTTP) request containing shell commands, which will be executed on the device, to an backend API endpoint of the cable modem.

In AutomateAppCore.dll in Blue Prism Robotic Process Automation 6.4.0.8445, a vulnerability in access control can be exploited to escalate privileges. The vulnerability allows for abusing the application for fraud or unauthorized access to certain information. The attack requires a valid user account to connect to the Blue Prism server, but the roles associated to this account are not required to have any permissions. First of all, the application files are modified to grant full permissions on ... In AutomateAppCore.dll in Blue Prism Robotic Process Automation 6.4.0.8445, a vulnerability in access control can be exploited to escalate privileges. The vulnerability allows for abusing the application for fraud or unauthorized access to certain information. The attack requires a valid user account to connect to the Blue Prism server, but the roles associated to this account are not required to have any permissions. First of all, the application files are modified to grant full permissions on the client side. In a test environment (or his own instance of the software) an attacker is able to grant himself full privileges also on the server side. He can then, for instance, create a process with malicious behavior and export it to disk. With the modified client, it is possible to import the exported file as a release and overwrite any existing process in the database. Eventually, the bots execute the malicious process. The server does not check the user's permissions for the aforementioned actions, such that a modification of the client software enables this kind of attack. Possible scenarios may involve changing bank accounts or setting passwords.

Show More

In Eclipse Buildship versions prior to 3.1.1, the build files indicate that this project is resolving dependencies over HTTP instead of HTTPS. Any of these artifacts could have been MITM to maliciously compromise them and infect the build artifacts that were produced. Additionally, if any of these JARs or other dependencies were compromised, any developers using these could continue to be infected past updating to fix this.

In all versions prior to version 3.9.6 for eclipse-wtp, all versions prior to version 9.4.4 for eclipse-cdt, and all versions prior to version 3.0.1 for eclipse-groovy, Spotless was resolving dependencies over an insecure channel (http). If the build occurred over an insecure connection, a malicious user could have perform a Man-in-the-Middle attack during the build and alter the build artifacts that were produced. In case that any of these artifacts were compromised, any developers using these ... In all versions prior to version 3.9.6 for eclipse-wtp, all versions prior to version 9.4.4 for eclipse-cdt, and all versions prior to version 3.0.1 for eclipse-groovy, Spotless was resolving dependencies over an insecure channel (http). If the build occurred over an insecure connection, a malicious user could have perform a Man-in-the-Middle attack during the build and alter the build artifacts that were produced. In case that any of these artifacts were compromised, any developers using these could be altered. **Note:** In order to validate that this artifact was not compromised, the maintainer would need to confirm that none of the artifacts published to the registry were not altered with. Until this happens, we can not guarantee that this artifact was not compromised even though the probability that this happened is low.

Show More

Eclipse Vorto versions prior to 0.11 resolved Maven build artifacts for the Xtext project over HTTP instead of HTTPS. Any of these dependent artifacts could have been maliciously compromised by a MITM attack. Hence produced build artifacts of Vorto might be infected.

SmokeDetector intentionally does automatic deployments of updated copies of SmokeDetector without server operator authority.

Juniper Identity Management Service (JIMS) for Windows versions prior to 1.1.4 may send an incorrect message to associated SRX services gateways. This may allow an attacker with physical access to an existing domain connected Windows system to bypass SRX firewall policies, or trigger a Denial of Service (DoS) condition for the network.

Newgen OmniFlow Intelligent Business Process Suite (iBPS) 7.0 has an "improper server side validation" vulnerability where client-side validations are tampered, and inappropriate information is stored on the server side and fetched from the server every time the user visits the D, creating business confusion. In the worst case, all available resources are consumed while processing the data, resulting in unavailability of the service to legitimate users. This occurs because non-editable parameter ... Newgen OmniFlow Intelligent Business Process Suite (iBPS) 7.0 has an "improper server side validation" vulnerability where client-side validations are tampered, and inappropriate information is stored on the server side and fetched from the server every time the user visits the D, creating business confusion. In the worst case, all available resources are consumed while processing the data, resulting in unavailability of the service to legitimate users. This occurs because non-editable parameters can be modified by manually editing a disabled form field within the developer options.

Show More

FreeBSD NSD before 3.2.13 allows remote attackers to crash a NSD child server process (SIGSEGV) and cause a denial of service in the NSD server.