Vulnerabilities (CVE)

An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected.

OpenClaw (aka clawdbot or Moltbot) before 2026.1.29 obtains a gatewayUrl value from a query string and automatically makes a WebSocket connection without prompting, sending a token value.

urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3's proxy support, it's possible to accidentally configure the `Proxy-Authorization` header even though it won't have any effect as the request is not using a forwarding proxy or a tunneling proxy. In those cases, urllib3 doesn't treat the `P ... urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3's proxy support, it's possible to accidentally configure the `Proxy-Authorization` header even though it won't have any effect as the request is not using a forwarding proxy or a tunneling proxy. In those cases, urllib3 doesn't treat the `Proxy-Authorization` HTTP header as one carrying authentication material and thus doesn't strip the header on cross-origin redirects. Because this is a highly unlikely scenario, we believe the severity of this vulnerability is low for almost all users. Out of an abundance of caution urllib3 will automatically strip the `Proxy-Authorization` header during cross-origin redirects to avoid the small chance that users are doing this on accident. Users should use urllib3's proxy support or disable automatic redirects to achieve safe processing of the `Proxy-Authorization` header, but we still decided to strip the header by default in order to further protect users who aren't using the correct approach. We believe the number of usages affected by this advisory is low. It requires all of the following to be true to be exploited: 1. Setting the `Proxy-Authorization` header without using urllib3's built-in proxy support. 2. Not disabling HTTP redirects. 3. Either not using an HTTPS origin server or for the proxy or target origin to redirect to a malicious origin. Users are advised to update to either version 1.26.19 or version 2.2.2. Users unable to upgrade may use the `Proxy-Authorization` header with urllib3's `ProxyManager`, disable HTTP redirects using `redirects=False` when sending requests, or not user the `Proxy-Authorization` header as mitigations.

Show More

Plex Media Server (PMS) 1.41.7.x through 1.42.0.x before 1.42.1 is affected by incorrect resource transfer between spheres because /myplex/account provides the credentials of the server owner (and a /api/resources call reveals other servers accessible by that server owner).

Edge3 Worker RPC RCE on Airflow 2. This issue affects Apache Airflow Providers Edge3: before 2.0.0 - and only if you installed and configured it on Airflow 2. The Edge3 provider support in Airflow 2 has been always development-only and not officially released, however if you installed and configured Edge3 provider in Airflow 2, it implicitly enabled non-public (normally) API which was used to test Edge Provider in Airflow 2 during the development. This API allowed Dag author to perform Remot ... Edge3 Worker RPC RCE on Airflow 2. This issue affects Apache Airflow Providers Edge3: before 2.0.0 - and only if you installed and configured it on Airflow 2. The Edge3 provider support in Airflow 2 has been always development-only and not officially released, however if you installed and configured Edge3 provider in Airflow 2, it implicitly enabled non-public (normally) API which was used to test Edge Provider in Airflow 2 during the development. This API allowed Dag author to perform Remote Code Execution in the webserver context, which Dag Author was not supposed to be able to do. If you installed and configured Edge3 provider for Airflow 2, you should uninstall it and migrate to Airflow 3. The new Edge3 provider versions (>=2.0.0) has minimum version of Airflow set to 3 and the RCE-prone Airflow 2 code is removed, so it should no longer be possible to use the Edge3 provider 2.0.0+ on Airflow 2. If you used Edge Provider in Airflow 3, you are not affected.

Show More

@misskey-dev/summaly is a tool for getting a summary of a web page. Starting in version 3.0.1 and prior to version 5.2.1, a logic error in the main `summaly` function causes the `allowRedirects` option to never be passed to any plugins, and as a result, isn't enforced. Misskey will follow redirects, despite explicitly requesting not to. Version 5.2.1 contains a patch for the issue.

The gh package before 1.5.0 for R delivers an HTTP response in a data structure that includes the Authorization header from the corresponding HTTP request.

A vulnerability allowed multiple unrestricted uploads in Pulse Connect Secure before 9.1R11.4 that could lead to an authenticated administrator to perform a file write via a maliciously crafted archive upload in the administrator web interface.

The Restaurant Brands International (RBI) assistant platform through 2025-09-06 allows remote attackers to review the stored audio of conversations between associates and Drive Thru customers.

Mercku M6a devices through 2.1.0 allow root TELNET logins via the web admin password.

XMLUnit for Java before 2.10.0, in the default configuration, might allow code execution via an untrusted stylesheet (used for an XSLT transformation), because XSLT extension functions are enabled.

In SonarQube before 25.6, 2025.3 Commercial, and 2025.1.3 LTA, authenticated low-privileged users can query the /api/v2/users-management/users endpoint and obtain user fields intended for administrators only, including the email addresses of other accounts.

qBittorrent before 5.1.2 does not prevent access to a local file that is referenced in a link URL. This affects rsswidget.cpp and searchjobwidget.cpp.

The EKEN video doorbell T6 BT60PLUS_MAIN_V1.0_GC1084_20230531 periodically sends debug logs to the EKEN cloud servers with sensitive information such as the Wi-Fi SSID and password.

PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and ... PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0.

Show More

PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was ... PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0.

Show More

Click Studios Passwordstate before 9.9 Build 9972 has a potential authentication bypass for Passwordstate emergency access. By using a crafted URL while on the Emergency Access web page, an unauthorized person can gain access to the Passwordstate Administration section.

In One Identity OneLogin before 2025.3.0, a request returns the OIDC client secret with GET Apps API v2 (even though this secret should only be returned when an App is first created),

In guix-daemon in GNU Guix before 1618ca7, a content-addressed-mirrors file can be written to create a setuid program that allows a regular user to gain the privileges of the build user that runs it (even after the build has ended).

WordPress 3.5 through 6.8.2 allows remote attackers to guess titles of private and draft posts via pingback.ping XML-RPC requests. NOTE: the Supplier is not changing this behavior.

An unauthenticated remote attacker could use a demo account of the portal to hijack devices that were created in that account by mistake.

A Client-Side Enforcement of Server-Side Security issue was discovered in ProMinent MultiFLEX M10a Controller web interface. The log out function in the application removes the user's session only on the client side. This may allow an attacker to bypass protection mechanisms, gain privileges, or assume the identity of an authenticated user.

The web server in Aternity before 9.0.1 does not require authentication for getMBeansFromURL loading of Java MBeans, which allows remote attackers to execute arbitrary Java code by registering MBeans.

Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. Moby's networking implementation allows for many networks, each with their own IP address range and gateway, to be defined. This feature is frequently referred to as custom networks, as each network can have a different driver, set of parameters and thus behaviors. When creating a network, the `--internal` flag is used to designate a netwo ... Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. Moby's networking implementation allows for many networks, each with their own IP address range and gateway, to be defined. This feature is frequently referred to as custom networks, as each network can have a different driver, set of parameters and thus behaviors. When creating a network, the `--internal` flag is used to designate a network as _internal_. The `internal` attribute in a docker-compose.yml file may also be used to mark a network _internal_, and other API clients may specify the `internal` parameter as well. When containers with networking are created, they are assigned unique network interfaces and IP addresses. The host serves as a router for non-internal networks, with a gateway IP that provides SNAT/DNAT to/from container IPs. Containers on an internal network may communicate between each other, but are precluded from communicating with any networks the host has access to (LAN or WAN) as no default route is configured, and firewall rules are set up to drop all outgoing traffic. Communication with the gateway IP address (and thus appropriately configured host services) is possible, and the host may communicate with any container IP directly. In addition to configuring the Linux kernel's various networking features to enable container networking, `dockerd` directly provides some services to container networks. Principal among these is serving as a resolver, enabling service discovery, and resolution of names from an upstream resolver. When a DNS request for a name that does not correspond to a container is received, the request is forwarded to the configured upstream resolver. This request is made from the container's network namespace: the level of access and routing of traffic is the same as if the request was made by the container itself. As a consequence of this design, containers solely attached to an internal network will be unable to resolve names using the upstream resolver, as the container itself is unable to communicate with that nameserver. Only the names of containers also attached to the internal network are able to be resolved. Many systems run a local forwarding DNS resolver. As the host and any containers have separate loopback devices, a consequence of the design described above is that containers are unable to resolve names from the host's configured resolver, as they cannot reach these addresses on the host loopback device. To bridge this gap, and to allow containers to properly resolve names even when a local forwarding resolver is used on a loopback address, `dockerd` detects this scenario and instead forward DNS requests from the host namework namespace. The loopback resolver then forwards the requests to its configured upstream resolvers, as expected. Because `dockerd` forwards DNS requests to the host loopback device, bypassing the container network namespace's normal routing semantics entirely, internal networks can unexpectedly forward DNS requests to an external nameserver. By registering a domain for which they control the authoritative nameservers, an attacker could arrange for a compromised container to exfiltrate data by encoding it in DNS queries that will eventually be answered by their nameservers. Docker Desktop is not affected, as Docker Desktop always runs an internal resolver on a RFC 1918 address. Moby releases 26.0.0, 25.0.4, and 23.0.11 are patched to prevent forwarding any DNS requests from internal networks. As a workaround, run containers intended to be solely attached to internal networks with a custom upstream address, which will force all upstream DNS queries to be resolved from the container's network namespace.

Show More

SMTP service in Microsoft Windows 2000, Windows XP Professional, and Exchange 2000 allows remote attackers to cause a denial of service via a command with a malformed data transfer (BDAT) request.

Opera does not prevent cookies that are sent over an insecure channel (HTTP) from also being sent over a secure channel (HTTPS/SSL) in the same domain, which could allow remote attackers to steal cookies and conduct unauthorized activities, aka "Cross Security Boundary Cookie Injection."

Incorrect resource transfer between spheres issue exists in RevoWorks SCVX and RevoWorks Browser. If exploited, malicious files may be downloaded to the system where using the product.

An issue was discovered in TigerGraph Enterprise Free Edition 3.x. Data loading jobs in gsql_server, created by any user with designer permissions, can read sensitive data from arbitrary locations.

An issue was discovered in the Shannon RCS component in Samsung Exynos Modem 5123 and 5300. Incorrect resource transfer between spheres can cause changes to the activation mode of RCS via a crafted application.

An issue was discovered in the Shannon RCS component in Samsung Exynos Modem 5123 and 5300. Incorrect resource transfer between spheres can cause unintended querying of the SIM status via a crafted application.

In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle: WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770)

`yt-dlp` and `youtube-dl` are command-line audio/video downloaders. Prior to the fixed versions, `yt-dlp` and `youtube-dl` do not limit the extensions of downloaded files, which could lead to arbitrary filenames being created in the download folder (and path traversal on Windows). Since `yt-dlp` and `youtube-dl` also read config from the working directory (and on Windows executables will be executed from the `yt-dlp` or `youtube-dl` directory), this could lead to arbitrary code being executed. ... `yt-dlp` and `youtube-dl` are command-line audio/video downloaders. Prior to the fixed versions, `yt-dlp` and `youtube-dl` do not limit the extensions of downloaded files, which could lead to arbitrary filenames being created in the download folder (and path traversal on Windows). Since `yt-dlp` and `youtube-dl` also read config from the working directory (and on Windows executables will be executed from the `yt-dlp` or `youtube-dl` directory), this could lead to arbitrary code being executed. `yt-dlp` version 2024.07.01 fixes this issue by whitelisting the allowed extensions. `youtube-dl` fixes this issue in commit `d42a222` on the `master` branch and in nightly builds tagged 2024-07-03 or later. This might mean some very uncommon extensions might not get downloaded, however it will also limit the possible exploitation surface. In addition to upgrading, have `.%(ext)s` at the end of the output template and make sure the user trusts the websites that they are downloading from. Also, make sure to never download to a directory within PATH or other sensitive locations like one's user directory, `system32`, or other binaries locations. For users who are not able to upgrade, keep the default output template (`-o "%(title)s [%(id)s].%(ext)s`); make sure the extension of the media to download is a common video/audio/sub/... one; try to avoid the generic extractor; and/or use `--ignore-config --config-location ...` to not load config from common locations.

Show More

Broadcast permission control vulnerability in the Bluetooth module.Successful exploitation of this vulnerability may affect service confidentiality.

Broadcast permission control vulnerability in the Bluetooth module.Successful exploitation of this vulnerability may affect service confidentiality.

Home assistant is an open source home automation. The assessment verified that webhooks available in the webhook component are triggerable via the `*.ui.nabu.casa` URL without authentication, even when the webhook is marked as Only accessible from the local network. This issue is facilitated by the SniTun proxy, which sets the source address to 127.0.0.1 on all requests sent to the public URL and forwarded to the local Home Assistant. This issue has been addressed in version 2023.9.0 and all use ... Home assistant is an open source home automation. The assessment verified that webhooks available in the webhook component are triggerable via the `*.ui.nabu.casa` URL without authentication, even when the webhook is marked as Only accessible from the local network. This issue is facilitated by the SniTun proxy, which sets the source address to 127.0.0.1 on all requests sent to the public URL and forwarded to the local Home Assistant. This issue has been addressed in version 2023.9.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Show More

PHP Remote File Inclusion in GitHub repository tsolucio/corebos prior to 8.0.

Elrond-GO is a go implementation for the Elrond Network protocol. Versions prior to 1.3.50 are subject to a processing issue where nodes are affected when trying to process a cross-shard relayed transaction with a smart contract deploy transaction data. The problem was a bad correlation between the transaction caches and the processing component. If the above-mentioned transaction was sent with more gas than required, the smart contract result (SCR transaction) that should have returned the left ... Elrond-GO is a go implementation for the Elrond Network protocol. Versions prior to 1.3.50 are subject to a processing issue where nodes are affected when trying to process a cross-shard relayed transaction with a smart contract deploy transaction data. The problem was a bad correlation between the transaction caches and the processing component. If the above-mentioned transaction was sent with more gas than required, the smart contract result (SCR transaction) that should have returned the leftover gas, would have been wrongly added to a cache that the processing unit did not consider. The node stopped notarizing metachain blocks. The fix was actually to extend the SCR transaction search in all other caches if it wasn't found in the correct (expected) sharded-cache. There are no known workarounds at this time. This issue has been patched in version 1.3.50.

Show More

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. In versions prior to 4.10.15, or 5.0.0 and above prior to 5.2.6, a user can write to the session object of another user if the session object ID is known. For example, an attacker can assign the session object to their own user by writing to the `user` field and then read any custom fields of that session object. Note that assigning a session to another user does not usually change the privile ... Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. In versions prior to 4.10.15, or 5.0.0 and above prior to 5.2.6, a user can write to the session object of another user if the session object ID is known. For example, an attacker can assign the session object to their own user by writing to the `user` field and then read any custom fields of that session object. Note that assigning a session to another user does not usually change the privileges of either of the two users, and a user cannot assign their own session to another user. This issue is patched in version 4.10.15 and above, and 5.2.6 and above. To mitigate this issue in unpatched versions add a `beforeSave` trigger to the `_Session` class and prevent writing if the requesting user is different from the user in the session object.

Show More

OpenZeppelin Contracts is a library for secure smart contract development. Contracts using the cross chain utilities for Arbitrum L2, `CrossChainEnabledArbitrumL2` or `LibArbitrumL2`, will classify direct interactions of externally owned accounts (EOAs) as cross chain calls, even though they are not started on L1. This issue has been patched in v4.7.2. Users are advised to upgrade. There are no known workarounds for this issue.

Unisphere for PowerMax versions before 9.2.3.15 contain a privilege escalation vulnerability. An adjacent malicious user may potentially exploit this vulnerability to escalate their privileges and access functionalities they do not have access to.