Vulnerabilities (CVE)

An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. It performs actions based on certain SMS commands. This can be used to set up a voice communication channel from the watch to any telephone number, initiated by sending a specific SMS and using the default password, e.g., pw,<password>,call,<mobile_number> triggers an outbound call from the watch. The password is sometimes available because of CVE-2019-20471.

In refresh of DevelopmentTiles.java, there is the possibility of leaving development settings accessible due to an insecure default value. This could lead to unwanted access to development settings, with no additional execution privileges needed. User interaction is needed for exploitation. Product: Android. Versions: Android-8.0 Android-8.1 Android-9. Android ID: A-117770924.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configuration of an affected device. An attacker who has access to an affected device could log in with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco devices that are running C ... A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configuration of an affected device. An attacker who has access to an affected device could log in with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco devices that are running Cisco IOS XE SD-WAN Software releases 16.11 and earlier.

Show More

A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exp ... A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exploit could allow the attacker to access the system with the privileges of the root user. This vulnerability is only exploitable over IPv6; IPv4 is not vulnerable.

Show More

A flaw was found in Ansible Tower, versions 3.6.x before 3.6.2 and 3.5.x before 3.5.3, where enabling RabbitMQ manager by setting it with '-e rabbitmq_enable_manager=true' exposes the RabbitMQ management interface publicly, as expected. If the default admin user is still active, an attacker could guess the password and gain access to the system.

The Last.fm desktop app (Last.fm Scrobbler) through 2.1.39 on macOS makes HTTP requests that include an API key without the use of SSL/TLS. Although there is an Enable SSL option, it is disabled by default, and cleartext requests are made as soon as the app starts.

NetApp FAS 8300/8700 and AFF A400 Baseboard Management Controller (BMC) firmware versions 13.x prior to 13.1P1 were shipped with a default account enabled that could allow unauthorized arbitrary command execution via local access.

On DTEN D5 and D7 before 1.3.4 devices, factory settings allows for firmware reflash and Android Debug Bridge (adb) enablement.

Silver Peak EdgeConnect SD-WAN before 8.1.7.x has an SNMP service with a public value for rocommunity and trapcommunity.

Lierda Grill Temperature Monitor V1.00_50006 has a default password of admin for the admin account, which allows an attacker to cause a Denial of Service or Information Disclosure via the undocumented access-point configuration page located on the device. This wifi thermometer app requests and requires excessive permissions to operate such as Fine GPS location, camera, applists, Serial number, IMEI. In addition to the "backdoor" login access for "admin" purposes, this accompanying app also estab ... Lierda Grill Temperature Monitor V1.00_50006 has a default password of admin for the admin account, which allows an attacker to cause a Denial of Service or Information Disclosure via the undocumented access-point configuration page located on the device. This wifi thermometer app requests and requires excessive permissions to operate such as Fine GPS location, camera, applists, Serial number, IMEI. In addition to the "backdoor" login access for "admin" purposes, this accompanying app also establishes connections with several china based URLs to include Alibaba cloud computing. NOTE: this device also ships with ProGrade branding.

Show More

An issue was discovered in Alfresco Community Edition versions 6.0 and lower. An unauthenticated, remote attacker could authenticate to Alfresco's Solr Web Admin Interface. The vulnerability is due to the presence of a default private key that is present in all default installations. An attacker could exploit this vulnerability by using the extracted private key and bundling it into a PKCS12. A successful exploit could allow the attacker to gain information about the target system (e.g., OS type ... An issue was discovered in Alfresco Community Edition versions 6.0 and lower. An unauthenticated, remote attacker could authenticate to Alfresco's Solr Web Admin Interface. The vulnerability is due to the presence of a default private key that is present in all default installations. An attacker could exploit this vulnerability by using the extracted private key and bundling it into a PKCS12. A successful exploit could allow the attacker to gain information about the target system (e.g., OS type, system file locations, Java version, Solr version, etc.) as well as the ability to launch further attacks by leveraging the access to Alfresco's Solr Web Admin Interface.

Show More

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses the same default 8 character passphrase for the administrative console and the WPA2 pre-shared key. Either an attack against HTTP Basic Authentication or an attack against WPA2 could be used to determine this passphrase.

doorGets 7.0 has a default administrator credential vulnerability. A remote attacker can use this vulnerability to gain administrator privileges for the creation and modification of articles via an H0XZlT44FcN1j9LTdFc5XRXhlF30UaGe1g3cZY6i1K9 access_token in a uri=blog&action=index&controller=blog action to /api/index.php.

The defaults settings for the CORS filter provided in Apache Tomcat 9.0.0.M1 to 9.0.8, 8.5.0 to 8.5.31, 8.0.0.RC1 to 8.0.52, 7.0.41 to 7.0.88 are insecure and enable 'supportsCredentials' for all origins. It is expected that users of the CORS filter will have configured it appropriately for their environment rather than using it in the default configuration. Therefore, it is expected that most users will not be impacted by this issue.

dcc_curr_list is initialized with a default invalid value that is expected to be programmed by the user through a sysfs node which could lead to an invalid access in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel.

An issue was discovered on Tenda AC15 devices. A remote, unauthenticated attacker can make a request to /goform/telnet, creating a telnetd service on the device. This service is password protected; however, several default accounts exist on the device that are root accounts, which can be used to log in.

In Elastic Cloud Enterprise (ECE) versions prior to 1.1.4 a default master encryption key is used in the process of granting ZooKeeper access to Elasticsearch clusters. Unless explicitly overwritten, this master key is predictable across all ECE deployments. If an attacker can connect to ZooKeeper directly they would be able to access configuration information of other tenants if their cluster ID is known.

Installation tool IPDT (Intel Processor Diagnostic Tool) 4.1.0.24 sets permissions of installed files incorrectly, allowing for execution of arbitrary code and potential privilege escalation.

In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9635M, MDM9650, MDM9655, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, SDM630, SDM636, SDM660, Snapdragon_High_Med_2016, the default build configuration of deviceprogrammer in BOOT.BF.3.0 enables the flag SKIP_SECBOOT_CHECK_NOT_RECOMMENDED_BY_QUALCOMM which will open up the peek and poke co ... In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9635M, MDM9650, MDM9655, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, SDM630, SDM636, SDM660, Snapdragon_High_Med_2016, the default build configuration of deviceprogrammer in BOOT.BF.3.0 enables the flag SKIP_SECBOOT_CHECK_NOT_RECOMMENDED_BY_QUALCOMM which will open up the peek and poke commands to any memory location on the target.

Show More

Safe Software FME Server through 2018.1 creates and enables three additional accounts in addition to the initial administrator account. The passwords to the three accounts are the same as the usernames, which are guest, user, and author. Logging in with these accounts will grant any user the default privilege roles that were also created for each of the accounts.

An issue was discovered on Cerner Connectivity Engine (CCE) 4 devices. The user running the main CCE firmware has NOPASSWD sudo privileges to several utilities that could be used to escalate privileges to root. One example is the "sudo ln -s /tmp/script /etc/cron.hourly/script" command.

IBM Maximo Asset Management 7.6 through 7.6.3 installs with a default administrator account that a remote intruder could use to gain administrator access to the system. This vulnerability is due to an incomplete fix for CVE-2015-4966. IBM X-Force ID: 142116.

The BluStar component in Mitel InAttend before 2.5 SP3 and CMG before 8.4 SP3 Suite Servers has a default password, which could allow remote attackers to gain unauthorized access and execute arbitrary scripts with potential impacts to the confidentiality, integrity and availability of the system.

Philips iSite and IntelliSpace PACS, iSite PACS, all versions, and IntelliSpace PACS, all versions. Default credentials and no authentication within third party software may allow an attacker to compromise a component of the system.

eVisitorPass contains default administrative credentials. An attacker could exploit this vulnerability to gain full access to the application.

Lobby Track Desktop contains default administrative credentials. An attacker could exploit this vulnerability to gain full access to the application.

LINK-NET LW-N605R devices with firmware 12.20.2.1486 allow Remote Code Execution via shell metacharacters in the HOST field of the ping feature at adm/systools.asp. Authentication is needed but the default password of admin for the admin account may be used in some cases.

GitHub Electron 1.7.15, 1.8.7, 2.0.7, and 3.0.0-beta.6, in certain scenarios involving IFRAME elements and "nativeWindowOpen: true" or "sandbox: true" options, is affected by a WebPreferences vulnerability that can be leveraged to perform remote code execution.

Router Default Credentials in Kraftway 24F2XG Router firmware version 3.5.30.1118 allow remote attackers to get privileged access to the router.

Arris Touchstone Telephony Gateway TG1682G 9.1.103J6 devices are distributed by some ISPs with a default password of "password" for the admin account that is used over an unencrypted http://192.168.0.1 connection, which might allow remote attackers to bypass intended access restrictions by leveraging access to the local network. NOTE: one or more user's guides distributed by ISPs state "At a minimum, you should set a login password."

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

Martem TELEM GW6/GWM versions prior to 2.0.87-4018403-k4 may allow unprivileged users to modify/upload a new system configuration or take the full control over the RTU using default credentials to connect to the RTU.

A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.7 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9.3 could allow an unauthenticated remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges.

A vulnerability in Cisco Meeting Server (CMS) could allow an unauthenticated, adjacent attacker to access services running on internal device interfaces of an affected system. The vulnerability is due to incorrect default configuration of the device, which can expose internal interfaces and ports on the external interface of the system. A successful exploit could allow the attacker to gain unauthenticated access to configuration and database files and sensitive meeting information on an affected ... A vulnerability in Cisco Meeting Server (CMS) could allow an unauthenticated, adjacent attacker to access services running on internal device interfaces of an affected system. The vulnerability is due to incorrect default configuration of the device, which can expose internal interfaces and ports on the external interface of the system. A successful exploit could allow the attacker to gain unauthenticated access to configuration and database files and sensitive meeting information on an affected system. This vulnerability affects Cisco Meeting Server (CMS) 2000 Platforms that are running a CMS Software release prior to Release 2.2.13 or Release 2.3.4. Cisco Bug IDs: CSCvg76471.

Show More

A vulnerability in the use of JSON web tokens by the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to gain administrative access to an affected system. The vulnerability is due to the presence of static default credentials for the web-based service portal of the affected software. An attacker could exploit this vulnerability by extracting the credentials from an image of the affected software and using those credentials to ... A vulnerability in the use of JSON web tokens by the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to gain administrative access to an affected system. The vulnerability is due to the presence of static default credentials for the web-based service portal of the affected software. An attacker could exploit this vulnerability by extracting the credentials from an image of the affected software and using those credentials to generate a valid administrative session token for the web-based service portal of any other installation of the affected software. A successful exploit could allow the attacker to gain administrative access to the web-based service portal of an affected system. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg30884.

Show More

The default configuration of broker.conf in Red Hat OpenShift Enterprise 2.x before 2.1 has a password of "mooo" for a Mongo account, which allows remote attackers to hijack the broker by providing this password, related to the openshift.sh script in Openshift Extras before 20130920. NOTE: this may overlap CVE-2013-4253 and CVE-2013-4281.

makepasswd 1.10 default settings generate insecure passwords

frysk packages through 2008-08-05 as shipped in Red Hat Enterprise Linux 5 are built with an insecure RPATH set in the ELF header of multiple binaries in /usr/bin/f* (e.g. fcore, fcatch, fstack, fstep, ...) shipped in the package. A local attacker can exploit this vulnerability by running arbitrary code as another user.

Insecure initial password configuration issue in SEIKO EPSON Web Config allows a remote unauthenticated attacker to set an arbitrary password and operate the device with an administrative privilege. As for the details of the affected versions, see the information provided by the vendor under [References].

Asio C++ Library before 1.13.0 lacks a fallback error code in the case of SSL_ERROR_SYSCALL with no associated error information from the SSL library being used.