Vulnerabilities (CVE)

Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of the `wasi:http/types.fields` resource is susceptible to panics when too many fields are added to the set of headers. Wasmtime's implementation in the `wasmtime-wasi-http` crate is backed by a data structure which panics when it reaches excessive capacity and this condition was not handled gracefully in Wasmtime. Panicking in a WASI implementation is a Denial of Servic ... Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of the `wasi:http/types.fields` resource is susceptible to panics when too many fields are added to the set of headers. Wasmtime's implementation in the `wasmtime-wasi-http` crate is backed by a data structure which panics when it reaches excessive capacity and this condition was not handled gracefully in Wasmtime. Panicking in a WASI implementation is a Denial of Service vector for embedders and is treated as a security vulnerability in Wasmtime. Wasmtime 24.0.6, 36.0.6, 40.0.4, 41.0.4, and 42.0.0 patch this vulnerability and return a trap to the guest instead of panicking. There are no known workarounds at this time. Embedders are encouraged to update to a patched version of Wasmtime.

Show More

Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of WASI host interfaces are susceptible to guest-controlled resource exhaustion on the host. Wasmtime did not appropriately place limits on resource allocations requested by the guests. This serves as a Denial of Service vector. Wasmtime 24.0.6, 36.0.6, 40.0.4, 41.0.4, and 42.0.0 have all been released with the fix for this issue. These versions do not prevent this issue ... Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of WASI host interfaces are susceptible to guest-controlled resource exhaustion on the host. Wasmtime did not appropriately place limits on resource allocations requested by the guests. This serves as a Denial of Service vector. Wasmtime 24.0.6, 36.0.6, 40.0.4, 41.0.4, and 42.0.0 have all been released with the fix for this issue. These versions do not prevent this issue in their default configuration to avoid breaking preexisting behaviors. All versions of Wasmtime have appropriate knobs to prevent this behavior, and Wasmtime 42.0.0-and-later will have these knobs tuned by default to prevent this issue from happening. There are no known workarounds for this issue without upgrading. Embedders are recommended to upgrade and configure their embeddings as necessary to prevent possibly-malicious guests from triggering this issue.

Show More

Wasmtime is a runtime for WebAssembly. Starting with Wasmtime 39.0.0, the `component-model-async` feature became the default, which brought with it a new implementation of `[Typed]Func::call_async` which made it capable of calling async-typed guest export functions. However, that implementation had a bug leading to a panic under certain circumstances: First, the host embedding calls `[Typed]Func::call_async` on a function exported by a component, polling the returned `Future` once. Second, the ... Wasmtime is a runtime for WebAssembly. Starting with Wasmtime 39.0.0, the `component-model-async` feature became the default, which brought with it a new implementation of `[Typed]Func::call_async` which made it capable of calling async-typed guest export functions. However, that implementation had a bug leading to a panic under certain circumstances: First, the host embedding calls `[Typed]Func::call_async` on a function exported by a component, polling the returned `Future` once. Second, the component function yields control to the async runtime (e.g. Tokio), e.g. due to a call to host function registered using `LinkerInstance::func_wrap_async` which yields, or due an epoch interruption. Third, the host embedding drops the `Future` after polling it once. This leaves the component instance in a non-reenterable state since the call never had a chance to complete. Fourth, the host embedding calls `[Typed]Func::call_async` again, polling the returned `Future`. Since the component instance cannot be entered at this point, the call traps, but not before allocating a task and thread for the call. Fifth, the host embedding ignores the trap and drops the `Future`. This panics due to the runtime attempting to dispose of the task created above, which panics since the thread has not yet exited. When a host embedder using the affected versions of Wasmtime calls `wasmtime::component::[Typed]Func::call_async` on a guest export and then drops the returned future without waiting for it to resolve, and then does so again with the same component instance, Wasmtime will panic. Embeddings that have the `component-model-async` compile-time feature disabled are unaffected. Wasmtime 40.0.4 and 41.0.4 have been patched to fix this issue. Versions 42.0.0 and later are not affected. If an embedding is not actually using any component-model-async features then disabling the `component-model-async` Cargo feature can work around this issue. This issue can also be worked around by either ensuring every `call_async` future is awaited until it completes or refraining from using the `Store` again after dropping a not-yet-resolved `call_async` future.

Show More

Wasmtime is a runtime for WebAssembly. Starting in version 29.0.0 and prior to version 36.0.5, 40.0.3, and 41.0.1, on x86-64 platforms with AVX, Wasmtime's compilation of the `f64.copysign` WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but unless there is another bug i ... Wasmtime is a runtime for WebAssembly. Starting in version 29.0.0 and prior to version 36.0.5, 40.0.3, and 41.0.1, on x86-64 platforms with AVX, Wasmtime's compilation of the `f64.copysign` WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but unless there is another bug in Cranelift this data is not visible to WebAssembly guests. Wasmtime 36.0.5, 40.0.3, and 41.0.1 have been released to fix this issue. Users are recommended to upgrade to the patched versions of Wasmtime. Other affected versions are not patched and users should updated to supported major version instead. This bug can be worked around by enabling signals-based-traps. While disabling guard pages can be a quick fix in some situations, it's not recommended to disabled guard pages as it is a key defense-in-depth measure of Wasmtime.

Show More

Wasmtime is a runtime for WebAssembly. In versions from 38.0.0 to before 38.0.3, the implementation of component-model related host-to-wasm trampolines in Wasmtime contained a bug where it's possible to carefully craft a component, which when called in a specific way, would crash the host with a segfault or assert failure. Wasmtime 38.0.3 has been released and is patched to fix this issue. There are no workarounds.

Wasmtime is a runtime for WebAssembly. Wasmtime 37.0.0 and 37.0.1 have memory leaks in the C/C++ API when using bindings for the `anyref` or `externref` WebAssembly values. This is caused by a regression introduced during the development of 37.0.0 and all prior versions of Wasmtime are unaffected. If `anyref` or `externref` is not used in the C/C++ API then embeddings are also unaffected by the leaky behavior. The `wasmtime` Rust crate is unaffected by this leak. Development of Wasmtime 37.0.0 ... Wasmtime is a runtime for WebAssembly. Wasmtime 37.0.0 and 37.0.1 have memory leaks in the C/C++ API when using bindings for the `anyref` or `externref` WebAssembly values. This is caused by a regression introduced during the development of 37.0.0 and all prior versions of Wasmtime are unaffected. If `anyref` or `externref` is not used in the C/C++ API then embeddings are also unaffected by the leaky behavior. The `wasmtime` Rust crate is unaffected by this leak. Development of Wasmtime 37.0.0 included a refactoring in Rust of changing the old `ManuallyRooted<T>` type to a new `OwnedRooted<T>` type. This change was integrated into Wasmtime's C API but left the C API in a state which had memory leaks. Additionally the new ownership semantics around this type were not reflected into the C++ API, making it leak-prone. A short version of the change is that previously `ManuallyRooted<T>`, as the name implies, required manual calls to an "unroot" operation. If this was forgotten then the memory was still cleaned up when the `wasmtime_store_t` itself was destroyed eventually. Documentation of when to "unroot" was sparse and there were already situations prior to 37.0.0 where memory would be leaked until the store was destroyed anyway. All memory, though, was always bound by the store, and destroying the store would guarantee that there were no memory leaks. In migrating to `OwnedRooted<T>` the usage of the type in Rust changed. A manual "unroot" operation is no longer required and it happens naturally as a destructor of the `OwnedRooted<T>` type in Rust itself. These new resource ownership semantics were not fully integrated into the preexisting semantics of the C/C++ APIs in Wasmtime. A crucial distinction of `OwnedRooted<T>` vs `ManuallyRooted<T>` is that the `OwnedRooted<T>` type allocates host memory outside of the store. This means that if an `OwnedRooted<T>` is leaked then destroying a store does not release this memory and it's a permanent memory leak on the host. This led to a few distinct, but related, issues arising: A typo in the `wasmtime_val_unroot` function in the C API meant that it did not actually unroot anything. This meant that even if embedders faithfully call the function then memory will be leaked. If a host-defined function returned a `wasmtime_{externref,anyref}_t` value then the value was never unrooted. The C/C++ API no longer has access to the value and the Rust implementation did not unroot. This meant that any values returned this way were never unrooted. The goal of the C++ API of Wasmtime is to encode automatic memory management in the type system, but the C++ API was not updated when `OwnedRooted<T>` was added. This meant that idiomatic usage of the C++ API would leak memory due to a lack of destructors on values. These issues have all been fixed in a 37.0.2 release of Wasmtime. The implementation of the C and C++ APIs have been updated accordingly and respectively to account for the changes of ownership here. For example `wasmtime_val_unroot` has been fixed to unroot, the Rust-side implementation of calling an embedder-defined function will unroot return values, and the C++ API now has destructors on the `ExternRef`, `AnyRef`, and `Val` types. These changes have been made to the 37.0.x release branch in a non-API-breaking fashion. Changes to the 38.0.0 release branch (and `main` in the Wasmtime repository) include minor API updates to better accommodate the API semantic changes. The only known workaround at this time is to avoid using `externref` and `anyref` in the C/C++ API of Wasmtime. If avoiding those types is not possible then it's required for users to update to mitigate the leak issue.

Show More

Wasmtime is an open source runtime for WebAssembly. Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process ... Wasmtime is an open source runtime for WebAssembly. Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process. Wasmtime first enabled support for tail calls by default in Wasmtime 21.0.0, although that release contained a bug where it was only on-by-default for some configurations. In Wasmtime 22.0.0 tail calls were enabled by default for all configurations. The specific crash happens when an exported function in a WebAssembly module (or component) performs a `return_call` (or `return_call_indirect` or `return_call_ref`) to an imported host function which captures a stack trace (for example, the host function raises a trap). In this situation, the stack-walking code previously assumed there was always at least one WebAssembly frame on the stack but with tail calls that is no longer true. With the tail-call proposal it's possible to have an entry trampoline appear as if it directly called the exit trampoline. This situation triggers an internal assert in the stack-walking code which raises a Rust `panic!()`. When Wasmtime is compiled with Rust versions 1.80 and prior this means that an `extern "C"` function in Rust is raising a `panic!()`. This is technically undefined behavior and typically manifests as a process abort when the unwinder fails to unwind Cranelift-generated frames. When Wasmtime is compiled with Rust versions 1.81 and later this panic becomes a deterministic process abort. Overall the impact of this issue is that this is a denial-of-service vector where a malicious WebAssembly module or component can cause the host to crash. There is no other impact at this time other than availability of a service as the result of the crash is always a crash and no more. This issue was discovered by routine fuzzing performed by the Wasmtime project via Google's OSS-Fuzz infrastructure. We have no evidence that it has ever been exploited by an attacker in the wild. All versions of Wasmtime which have tail calls enabled by default have been patched: * 21.0.x - patched in 21.0.2 * 22.0.x - patched in 22.0.1 * 23.0.x - patched in 23.0.3 * 24.0.x - patched in 24.0.1 * 25.0.x - patched in 25.0.2. Wasmtime versions from 12.0.x (the first release with experimental tail call support) to 20.0.x (the last release with tail-calls off-by-default) have support for tail calls but the support is disabled by default. These versions are not affected in their default configurations, but users who explicitly enabled tail call support will need to either disable tail call support or upgrade to a patched version of Wasmtime. The main workaround for this issue is to disable tail support for tail calls in Wasmtime, for example with `Config::wasm_tail_call(false)`. Users are otherwise encouraged to upgrade to patched versions.

Show More

Wasmtime is an open source runtime for WebAssembly. Under certain concurrent event orderings, a `wasmtime::Engine`'s internal type registry was susceptible to double-unregistration bugs due to a race condition, leading to panics and potentially type registry corruption. That registry corruption could, following an additional and particular sequence of concurrent events, lead to violations of WebAssembly's control-flow integrity (CFI) and type safety. Users that do not use `wasmtime::Engine` acro ... Wasmtime is an open source runtime for WebAssembly. Under certain concurrent event orderings, a `wasmtime::Engine`'s internal type registry was susceptible to double-unregistration bugs due to a race condition, leading to panics and potentially type registry corruption. That registry corruption could, following an additional and particular sequence of concurrent events, lead to violations of WebAssembly's control-flow integrity (CFI) and type safety. Users that do not use `wasmtime::Engine` across multiple threads are not affected. Users that only create new modules across threads over time are additionally not affected. Reproducing this bug requires creating and dropping multiple type instances (such as `wasmtime::FuncType` or `wasmtime::ArrayType`) concurrently on multiple threads, where all types are associated with the same `wasmtime::Engine`. **Wasm guests cannot trigger this bug.** See the "References" section below for a list of Wasmtime types-related APIs that are affected. Wasmtime maintains an internal registry of types within a `wasmtime::Engine` and an engine is shareable across threads. Types can be created and referenced through creation of a `wasmtime::Module`, creation of `wasmtime::FuncType`, or a number of other APIs where the host creates a function (see "References" below). Each of these cases interacts with an engine to deduplicate type information and manage type indices that are used to implement type checks in WebAssembly's `call_indirect` function, for example. This bug is a race condition in this management where the internal type registry could be corrupted to trigger an assert or contain invalid state. Wasmtime's internal representation of a type has individual types (e.g. one-per-host-function) maintain a registration count of how many time it's been used. Types additionally have state within an engine behind a read-write lock such as lookup/deduplication information. The race here is a time-of-check versus time-of-use (TOCTOU) bug where one thread atomically decrements a type entry's registration count, observes zero registrations, and then acquires a lock in order to unregister that entry. However, between when this first thread observed the zero-registration count and when it acquires that lock, another thread could perform the following sequence of events: re-register another copy of the type, which deduplicates to that same entry, resurrecting it and incrementing its registration count; then drop the type and decrement its registration count; observe that the registration count is now zero; acquire the type registry lock; and finally unregister the type. Now, when the original thread finally acquires the lock and unregisters the entry, it is the second time this entry has been unregistered. This bug was originally introduced in Wasmtime 19's development of the WebAssembly GC proposal. This bug affects users who are not using the GC proposal, however, and affects Wasmtime in its default configuration even when the GC proposal is disabled. Wasmtime users using 19.0.0 and after are all affected by this issue. We have released the following Wasmtime versions, all of which have a fix for this bug: * 21.0.2 * 22.0.1 * 23.0.3 * 24.0.1 * 25.0.2. If your application creates and drops Wasmtime types on multiple threads concurrently, there are no known workarounds. Users are encouraged to upgrade to a patched release.

Show More

Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.4, 33.0.2, and 34.0.2, a bug in Wasmtime's implementation of the WASIp1 set of import functions can lead to a WebAssembly guest inducing a panic in the host (embedder). The specific bug is triggered by calling `path_open` after calling `fd_renumber` with either two equal argument values or a second argument being equal to a previously-closed file descriptor number value. The corrupt state introduced in `fd_renumber` will lead to the s ... Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.4, 33.0.2, and 34.0.2, a bug in Wasmtime's implementation of the WASIp1 set of import functions can lead to a WebAssembly guest inducing a panic in the host (embedder). The specific bug is triggered by calling `path_open` after calling `fd_renumber` with either two equal argument values or a second argument being equal to a previously-closed file descriptor number value. The corrupt state introduced in `fd_renumber` will lead to the subsequent opening of a file descriptor to panic. This panic cannot introduce memory unsafety or allow WebAssembly to break outside of its sandbox, however. There is no possible heap corruption or memory unsafety from this panic. This bug is in the implementation of Wasmtime's `wasmtime-wasi` crate which provides an implementation of WASIp1. The bug requires a specially crafted call to `fd_renumber` in addition to the ability to open a subsequent file descriptor. Opening a second file descriptor is only possible when a preopened directory was provided to the guest, and this is common amongst embeddings. A panic in the host is considered a denial-of-service vector for WebAssembly embedders and is thus a security issue in Wasmtime. This bug does not affect WASIp2 and embedders using components. In accordance with Wasmtime's release process, patch releases are available as 24.0.4, 33.0.2, and 34.0.2. Users of other release of Wasmtime are recommended to move to a supported release of Wasmtime. Embedders who are using components or are not providing guest access to create more file descriptors (e.g. via a preopened filesystem directory) are not affected by this issue. Otherwise, there is no workaround at this time, and affected embeddings are recommended to update to a patched version which will not cause a panic in the host.

Show More

Wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device file ... Wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device filenames with superscript digits, and through them gain access peripheral devices connected to the computer, or network resources mapped to those devices. This can include modems, printers, network printers, and any other device connected to a serial or parallel port, including emulated USB serial ports. Patch releases for Wasmtime have been issued as 24.0.2, 25.0.3, and 26.0.1. Users of Wasmtime 23.0.x and prior are recommended to upgrade to one of these patched versions. There are no known workarounds for this issue. Affected Windows users are recommended to upgrade.

Show More

wasmtime is a runtime for WebAssembly. The 19.0.0 release of Wasmtime contains a regression introduced during its development which can lead to a guest WebAssembly module causing a panic in the host runtime. A valid WebAssembly module, when executed at runtime, may cause this panic. This vulnerability has been patched in version 19.0.1.

Wasmtime is a standalone runtime for WebAssembly. Prior to versions 2.0.2 and 1.0.2, there is a bug in Wasmtime's implementation of its pooling instance allocator where when a linear memory is reused for another instance the initial heap snapshot of the prior instance can be visible, erroneously to the next instance. This bug has been patched and users should upgrade to Wasmtime 2.0.2 and 1.0.2. Other mitigations include disabling the pooling allocator and disabling the `memory-init-cow`.

Wasmtime is a standalone runtime for WebAssembly. Wasmtime versions from 10.0.0 to versions 10.02, 11.0.2, and 12.0.1 contain a miscompilation of the WebAssembly `i64x2.shr_s` instruction on x86_64 platforms when the shift amount is a constant value that is larger than 32. Only x86_64 is affected so all other targets are not affected by this. The miscompilation results in the instruction producing an incorrect result, namely the low 32-bits of the second lane of the vector are derived from the l ... Wasmtime is a standalone runtime for WebAssembly. Wasmtime versions from 10.0.0 to versions 10.02, 11.0.2, and 12.0.1 contain a miscompilation of the WebAssembly `i64x2.shr_s` instruction on x86_64 platforms when the shift amount is a constant value that is larger than 32. Only x86_64 is affected so all other targets are not affected by this. The miscompilation results in the instruction producing an incorrect result, namely the low 32-bits of the second lane of the vector are derived from the low 32-bits of the second lane of the input vector instead of the high 32-bits. The primary impact of this issue is that any WebAssembly program using the `i64x2.shr_s` with a constant shift amount larger than 32 may produce an incorrect result. This issue is not an escape from the WebAssembly sandbox. Execution of WebAssembly guest programs will still behave correctly with respect to memory sandboxing and isolation from the host. Wasmtime considers non-spec-compliant behavior as a security issue nonetheless. This issue was discovered through fuzzing of Wasmtime's code generator Cranelift. Wasmtime versions 10.0.2, 11.0.2, and 12.0.2 are all patched to no longer have this miscompilation. This issue only affects x86_64 hosts and the only workaround is to either scan for this pattern in wasm modules which is nontrivial or to disable the SIMD proposal for WebAssembly. Users prior to 10.0.0 are unaffected by this vulnerability.

Show More

Wasmtime is a standalone runtime for WebAssembly. Prior to versions 6.0.2, 7.0.1, and 8.0.1, Wasmtime's implementation of managing per-instance state, such as tables and memories, contains LLVM-level undefined behavior. This undefined behavior was found to cause runtime-level issues when compiled with LLVM 16 which causes some writes, which are critical for correctness, to be optimized away. Vulnerable versions of Wasmtime compiled with Rust 1.70, which is currently in beta, or later are known t ... Wasmtime is a standalone runtime for WebAssembly. Prior to versions 6.0.2, 7.0.1, and 8.0.1, Wasmtime's implementation of managing per-instance state, such as tables and memories, contains LLVM-level undefined behavior. This undefined behavior was found to cause runtime-level issues when compiled with LLVM 16 which causes some writes, which are critical for correctness, to be optimized away. Vulnerable versions of Wasmtime compiled with Rust 1.70, which is currently in beta, or later are known to have incorrectly compiled functions. Versions of Wasmtime compiled with the current Rust stable release, 1.69, and prior are not known at this time to have any issues, but can theoretically exhibit potential issues. The underlying problem is that Wasmtime's runtime state for an instance involves a Rust-defined structure called `Instance` which has a trailing `VMContext` structure after it. This `VMContext` structure has a runtime-defined layout that is unique per-module. This representation cannot be expressed with safe code in Rust so `unsafe` code is required to maintain this state. The code doing this, however, has methods which take `&self` as an argument but modify data in the `VMContext` part of the allocation. This means that pointers derived from `&self` are mutated. This is typically not allowed, except in the presence of `UnsafeCell`, in Rust. When compiled to LLVM these functions have `noalias readonly` parameters which means it's UB to write through the pointers. Wasmtime's internal representation and management of `VMContext` has been updated to use `&mut self` methods where appropriate. Additionally verification tools for `unsafe` code in Rust, such as `cargo miri`, are planned to be executed on the `main` branch soon to fix any Rust-level issues that may be exploited in future compiler versions. Precomplied binaries available for Wasmtime from GitHub releases have been compiled with at most LLVM 15 so are not known to be vulnerable. As mentioned above, however, it's still recommended to update. Wasmtime version 6.0.2, 7.0.1, and 8.0.1 have been issued which contain the patch necessary to work correctly on LLVM 16 and have no known UB on LLVM 15 and earlier. If Wasmtime is compiled with Rust 1.69 and prior, which use LLVM 15, then there are no known issues. There is a theoretical possibility for undefined behavior to exploited, however, so it's recommended that users upgrade to a patched version of Wasmtime. Users using beta Rust (1.70 at this time) or nightly Rust (1.71 at this time) must update to a patched version to work correctly.

Show More

wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's code generation backend, Cranelift, has a bug on x86_64 platforms for the WebAssembly `i8x16.select` instruction which will produce the wrong results when the same operand is provided to the instruction and some of the selected indices are greater than 16. There is an off-by-one error in the calculation of the mask to the `pshufb` instruction which causes incorrect results to be returned if lanes are selected from the second vecto ... wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's code generation backend, Cranelift, has a bug on x86_64 platforms for the WebAssembly `i8x16.select` instruction which will produce the wrong results when the same operand is provided to the instruction and some of the selected indices are greater than 16. There is an off-by-one error in the calculation of the mask to the `pshufb` instruction which causes incorrect results to be returned if lanes are selected from the second vector. This codegen bug has been fixed in Wasmtiem 6.0.1, 5.0.1, and 4.0.1. Users are recommended to upgrade to these updated versions. If upgrading is not an option for you at this time, you can avoid this miscompilation by disabling the Wasm simd proposal. Additionally the bug is only present on x86_64 hosts. Other platforms such as AArch64 and s390x are not affected.

Show More

wasmtime is a fast and secure runtime for WebAssembly. In affected versions wasmtime's code generator, Cranelift, has a bug on x86_64 targets where address-mode computation mistakenly would calculate a 35-bit effective address instead of WebAssembly's defined 33-bit effective address. This bug means that, with default codegen settings, a wasm-controlled load/store operation could read/write addresses up to 35 bits away from the base of linear memory. Due to this bug, however, addresses up to `0x ... wasmtime is a fast and secure runtime for WebAssembly. In affected versions wasmtime's code generator, Cranelift, has a bug on x86_64 targets where address-mode computation mistakenly would calculate a 35-bit effective address instead of WebAssembly's defined 33-bit effective address. This bug means that, with default codegen settings, a wasm-controlled load/store operation could read/write addresses up to 35 bits away from the base of linear memory. Due to this bug, however, addresses up to `0xffffffff * 8 + 0x7ffffffc = 36507222004 = ~34G` bytes away from the base of linear memory are possible from guest code. This means that the virtual memory 6G away from the base of linear memory up to ~34G away can be read/written by a malicious module. A guest module can, without the knowledge of the embedder, read/write memory in this region. The memory may belong to other WebAssembly instances when using the pooling allocator, for example. Affected embedders are recommended to analyze preexisting wasm modules to see if they're affected by the incorrect codegen rules and possibly correlate that with an anomalous number of traps during historical execution to locate possibly suspicious modules. The specific bug in Cranelift's x86_64 backend is that a WebAssembly address which is left-shifted by a constant amount from 1 to 3 will get folded into x86_64's addressing modes which perform shifts. For example `(i32.load (i32.shl (local.get 0) (i32.const 3)))` loads from the WebAssembly address `$local0 << 3`. When translated to Cranelift the `$local0 << 3` computation, a 32-bit value, is zero-extended to a 64-bit value and then added to the base address of linear memory. Cranelift would generate an instruction of the form `movl (%base, %local0, 8), %dst` which calculates `%base + %local0 << 3`. The bug here, however, is that the address computation happens with 64-bit values, where the `$local0 << 3` computation was supposed to be truncated to a a 32-bit value. This means that `%local0`, which can use up to 32-bits for an address, gets 3 extra bits of address space to be accessible via this `movl` instruction. The fix in Cranelift is to remove the erroneous lowering rules in the backend which handle these zero-extended expression. The above example is then translated to `movl %local0, %temp; shl $3, %temp; movl (%base, %temp), %dst` which correctly truncates the intermediate computation of `%local0 << 3` to 32-bits inside the `%temp` register which is then added to the `%base` value. Wasmtime version 4.0.1, 5.0.1, and 6.0.1 have been released and have all been patched to no longer contain the erroneous lowering rules. While updating Wasmtime is recommended, there are a number of possible workarounds that embedders can employ to mitigate this issue if updating is not possible. Note that none of these workarounds are on-by-default and require explicit configuration: 1. The `Config::static_memory_maximum_size(0)` option can be used to force all accesses to linear memory to be explicitly bounds-checked. This will perform a bounds check separately from the address-mode computation which correctly calculates the effective address of a load/store. Note that this can have a large impact on the execution performance of WebAssembly modules. 2. The `Config::static_memory_guard_size(1 << 36)` option can be used to greatly increase the guard pages placed after linear memory. This will guarantee that memory accesses up-to-34G away are guaranteed to be semantically correct by reserving unmapped memory for the instance. Note that this reserves a very large amount of virtual memory per-instances and can greatly reduce the maximum number of concurrent instances being run. 3. If using a non-x86_64 host is possible, then that will also work around this bug. This bug does not affect Wasmtime's or Cranelift's AArch64 backend, for example.

Show More

Wasmtime is a standalone runtime for WebAssembly. Prior to version 2.0.2, there is a bug in Wasmtime's C API implementation where the definition of the `wasmtime_trap_code` does not match its declared signature in the `wasmtime/trap.h` header file. This discrepancy causes the function implementation to perform a 4-byte write into a 1-byte buffer provided by the caller. This can lead to three zero bytes being written beyond the 1-byte location provided by the caller. This bug has been patched and ... Wasmtime is a standalone runtime for WebAssembly. Prior to version 2.0.2, there is a bug in Wasmtime's C API implementation where the definition of the `wasmtime_trap_code` does not match its declared signature in the `wasmtime/trap.h` header file. This discrepancy causes the function implementation to perform a 4-byte write into a 1-byte buffer provided by the caller. This can lead to three zero bytes being written beyond the 1-byte location provided by the caller. This bug has been patched and users should upgrade to Wasmtime 2.0.2. This bug can be worked around by providing a 4-byte buffer casted to a 1-byte buffer when calling `wasmtime_trap_code`. Users of the `wasmtime` crate are not affected by this issue, only users of the C API function `wasmtime_trap_code` are affected.

Show More

Wasmtime is a standalone runtime for WebAssembly. Prior to version 2.0.2, there is a bug in Wasmtime's implementation of its pooling instance allocator when the allocator is configured to give WebAssembly instances a maximum of zero pages of memory. In this configuration, the virtual memory mapping for WebAssembly memories did not meet the compiler-required configuration requirements for safely executing WebAssembly modules. Wasmtime's default settings require virtual memory page faults to indic ... Wasmtime is a standalone runtime for WebAssembly. Prior to version 2.0.2, there is a bug in Wasmtime's implementation of its pooling instance allocator when the allocator is configured to give WebAssembly instances a maximum of zero pages of memory. In this configuration, the virtual memory mapping for WebAssembly memories did not meet the compiler-required configuration requirements for safely executing WebAssembly modules. Wasmtime's default settings require virtual memory page faults to indicate that wasm reads/writes are out-of-bounds, but the pooling allocator's configuration would not create an appropriate virtual memory mapping for this meaning out of bounds reads/writes can successfully read/write memory unrelated to the wasm sandbox within range of the base address of the memory mapping created by the pooling allocator. This bug is not applicable with the default settings of the `wasmtime` crate. This bug can only be triggered by setting `InstanceLimits::memory_pages` to zero. This is expected to be a very rare configuration since this means that wasm modules cannot allocate any pages of linear memory. All wasm modules produced by all current toolchains are highly likely to use linear memory, so it's expected to be unlikely that this configuration is set to zero by any production embedding of Wasmtime. This bug has been patched and users should upgrade to Wasmtime 2.0.2. This bug can be worked around by increasing the `memory_pages` allotment when configuring the pooling allocator to a value greater than zero. If an embedding wishes to still prevent memory from actually being used then the `Store::limiter` method can be used to dynamically disallow growth of memory beyond 0 bytes large. Note that the default `memory_pages` value is greater than zero.

Show More

Wasmtime is a standalone runtime for WebAssembly. There is a bug in Wasmtime's code generator, Cranelift, for AArch64 targets where constant divisors can result in incorrect division results at runtime. This affects Wasmtime prior to version 0.38.2 and Cranelift prior to 0.85.2. This issue only affects the AArch64 platform. Other platforms are not affected. The translation rules for constants did not take into account whether sign or zero-extension should happen which resulted in an incorrect va ... Wasmtime is a standalone runtime for WebAssembly. There is a bug in Wasmtime's code generator, Cranelift, for AArch64 targets where constant divisors can result in incorrect division results at runtime. This affects Wasmtime prior to version 0.38.2 and Cranelift prior to 0.85.2. This issue only affects the AArch64 platform. Other platforms are not affected. The translation rules for constants did not take into account whether sign or zero-extension should happen which resulted in an incorrect value being placed into a register when a division was encountered. The impact of this bug is that programs executing within the WebAssembly sandbox would not behave according to the WebAssembly specification. This means that it is hypothetically possible for execution within the sandbox to go awry and WebAssembly programs could produce unexpected results. This should not impact hosts executing WebAssembly but does affect the correctness of guest programs. This bug has been patched in Wasmtime version 0.38.2 and cranelift-codegen 0.85.2. There are no known workarounds.

Show More

Wasmtime is a standalone runtime for WebAssembly. There is a bug in the Wasmtime's code generator, Cranelift, where functions using reference types may be incorrectly missing metadata required for runtime garbage collection. This means that if a GC happens at runtime then the GC pass will mistakenly think these functions do not have live references to GC'd values, reclaiming them and deallocating them. The function will then subsequently continue to use the values assuming they had not been GC'd ... Wasmtime is a standalone runtime for WebAssembly. There is a bug in the Wasmtime's code generator, Cranelift, where functions using reference types may be incorrectly missing metadata required for runtime garbage collection. This means that if a GC happens at runtime then the GC pass will mistakenly think these functions do not have live references to GC'd values, reclaiming them and deallocating them. The function will then subsequently continue to use the values assuming they had not been GC'd, leading later to a use-after-free. This bug was introduced in the migration to the `regalloc2` register allocator that occurred in the Wasmtime 0.37.0 release on 2022-05-20. This bug has been patched and users should upgrade to Wasmtime version 0.38.2. Mitigations for this issue can be achieved by disabling the reference types proposal by passing `false` to `wasmtime::Config::wasm_reference_types` or downgrading to Wasmtime 0.36.0 or prior.

Show More

Wasmtime is a standalone runtime for WebAssembly. In affected versions wasmtime's implementation of the SIMD proposal for WebAssembly on x86_64 contained two distinct bugs in the instruction lowerings implemented in Cranelift. The aarch64 implementation of the simd proposal is not affected. The bugs were presented in the `i8x16.swizzle` and `select` WebAssembly instructions. The `select` instruction is only affected when the inputs are of `v128` type. The correspondingly affected Cranelift instr ... Wasmtime is a standalone runtime for WebAssembly. In affected versions wasmtime's implementation of the SIMD proposal for WebAssembly on x86_64 contained two distinct bugs in the instruction lowerings implemented in Cranelift. The aarch64 implementation of the simd proposal is not affected. The bugs were presented in the `i8x16.swizzle` and `select` WebAssembly instructions. The `select` instruction is only affected when the inputs are of `v128` type. The correspondingly affected Cranelift instructions were `swizzle` and `select`. The `swizzle` instruction lowering in Cranelift erroneously overwrote the mask input register which could corrupt a constant value, for example. This means that future uses of the same constant may see a different value than the constant itself. The `select` instruction lowering in Cranelift wasn't correctly implemented for vector types that are 128-bits wide. When the condition was 0 the wrong instruction was used to move the correct input to the output of the instruction meaning that only the low 32 bits were moved and the upper 96 bits of the result were left as whatever the register previously contained (instead of the input being moved from). The `select` instruction worked correctly if the condition was nonzero, however. This bug in Wasmtime's implementation of these instructions on x86_64 represents an incorrect implementation of the specified semantics of these instructions according to the WebAssembly specification. The impact of this is benign for hosts running WebAssembly but represents possible vulnerabilities within the execution of a guest program. For example a WebAssembly program could take unintended branches or materialize incorrect values internally which runs the risk of exposing the program itself to other related vulnerabilities which can occur from miscompilations. We have released Wasmtime 0.38.1 and cranelift-codegen (and other associated cranelift crates) 0.85.1 which contain the corrected implementations of these two instructions in Cranelift. If upgrading is not an option for you at this time, you can avoid the vulnerability by disabling the Wasm simd proposal. Additionally the bug is only present on x86_64 hosts. Other aarch64 hosts are not affected. Note that s390x hosts don't yet implement the simd proposal and are not affected.

Show More

Wasmtime is a standalone JIT-style runtime for WebAssembly, using Cranelift. There is a use after free vulnerability in Wasmtime when both running Wasm that uses externrefs and enabling epoch interruption in Wasmtime. If you are not explicitly enabling epoch interruption (it is disabled by default) then you are not affected. If you are explicitly disabling the Wasm reference types proposal (it is enabled by default) then you are also not affected. The use after free is caused by Cranelift failin ... Wasmtime is a standalone JIT-style runtime for WebAssembly, using Cranelift. There is a use after free vulnerability in Wasmtime when both running Wasm that uses externrefs and enabling epoch interruption in Wasmtime. If you are not explicitly enabling epoch interruption (it is disabled by default) then you are not affected. If you are explicitly disabling the Wasm reference types proposal (it is enabled by default) then you are also not affected. The use after free is caused by Cranelift failing to emit stack maps when there are safepoints inside cold blocks. Cold blocks occur when epoch interruption is enabled. Cold blocks are emitted at the end of compiled functions, and change the order blocks are emitted versus defined. This reordering accidentally caused Cranelift to skip emitting some stack maps because it expected to emit the stack maps in block definition order, rather than block emission order. When Wasmtime would eventually collect garbage, it would fail to find live references on the stack because of the missing stack maps, think that they were unreferenced garbage, and therefore reclaim them. Then after the collection ended, the Wasm code could use the reclaimed-too-early references, which is a use after free. Patches have been released in versions 0.34.2 and 0.35.2, which fix the vulnerability. All Wasmtime users are recommended to upgrade to these patched versions. If upgrading is not an option for you at this time, you can avoid the vulnerability by either: disabling the Wasm reference types proposal, config.wasm_reference_types(false); or by disabling epoch interruption if you were previously enabling it. config.epoch_interruption(false).

Show More

Wasmtime is an open source runtime for WebAssembly & WASI. Prior to versions 0.34.1 and 0.33.1, there exists a bug in the pooling instance allocator in Wasmtime's runtime where a failure to instantiate an instance for a module that defines an `externref` global will result in an invalid drop of a `VMExternRef` via an uninitialized pointer. A number of conditions listed in the GitHub Security Advisory must be true in order for an instance to be vulnerable to this issue. Maintainers believe that t ... Wasmtime is an open source runtime for WebAssembly & WASI. Prior to versions 0.34.1 and 0.33.1, there exists a bug in the pooling instance allocator in Wasmtime's runtime where a failure to instantiate an instance for a module that defines an `externref` global will result in an invalid drop of a `VMExternRef` via an uninitialized pointer. A number of conditions listed in the GitHub Security Advisory must be true in order for an instance to be vulnerable to this issue. Maintainers believe that the effective impact of this bug is relatively small because the usage of `externref` is still uncommon and without a resource limiter configured on the `Store`, which is not the default configuration, it is only possible to trigger the bug from an error returned by `mprotect` or `VirtualAlloc`. Note that on Linux with the `uffd` feature enabled, it is only possible to trigger the bug from a resource limiter as the call to `mprotect` is skipped. The bug has been fixed in 0.34.1 and 0.33.1 and users are encouraged to upgrade as soon as possible. If it is not possible to upgrade to version 0.34.1 or 0.33.1 of the `wasmtime` crate, it is recommend that support for the reference types proposal be disabled by passing `false` to `Config::wasm_reference_types`. Doing so will prevent modules that use `externref` from being loaded entirely.

Show More

Wasmtime is an open source runtime for WebAssembly & WASI. Wasmtime before version 0.30.0 is affected by a type confusion vulnerability. As a Rust library the `wasmtime` crate clearly marks which functions are safe and which are `unsafe`, guaranteeing that if consumers never use `unsafe` then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of `Linker::func_*` APIs. These APIs were previously not sound when one `Eng ... Wasmtime is an open source runtime for WebAssembly & WASI. Wasmtime before version 0.30.0 is affected by a type confusion vulnerability. As a Rust library the `wasmtime` crate clearly marks which functions are safe and which are `unsafe`, guaranteeing that if consumers never use `unsafe` then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of `Linker::func_*` APIs. These APIs were previously not sound when one `Engine` was used to create the `Linker` and then a different `Engine` was used to create a `Store` and then the `Linker` was used to instantiate a module into that `Store`. Cross-`Engine` usage of functions is not supported in Wasmtime and this can result in type confusion of function pointers, resulting in being able to safely call a function with the wrong type. Triggering this bug requires using at least two `Engine` values in an embedding and then additionally using two different values with a `Linker` (one at the creation time of the `Linker` and another when instantiating a module with the `Linker`). It's expected that usage of more-than-one `Engine` in an embedding is relatively rare since an `Engine` is intended to be a globally shared resource, so the expectation is that the impact of this issue is relatively small. The fix implemented is to change this behavior to `panic!()` in Rust instead of silently allowing it. Using different `Engine` instances with a `Linker` is a programmer bug that `wasmtime` catches at runtime. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime and are using more than one `Engine` in your embedding it's recommended to instead use only one `Engine` for the entire program if possible. An `Engine` is designed to be a globally shared resource that is suitable to have only one for the lifetime of an entire process. If using multiple `Engine`s is required then code should be audited to ensure that `Linker` is only used with one `Engine`.

Show More

Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.26.0 and before version 0.30.0 is affected by a memory unsoundness vulnerability. There was an invalid free and out-of-bounds read and write bug when running Wasm that uses `externref`s in Wasmtime. To trigger this bug, Wasmtime needs to be running Wasm that uses `externref`s, the host creates non-null `externrefs`, Wasmtime performs a garbage collection (GC), and there has to be a Wasm frame on the stack that ... Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.26.0 and before version 0.30.0 is affected by a memory unsoundness vulnerability. There was an invalid free and out-of-bounds read and write bug when running Wasm that uses `externref`s in Wasmtime. To trigger this bug, Wasmtime needs to be running Wasm that uses `externref`s, the host creates non-null `externrefs`, Wasmtime performs a garbage collection (GC), and there has to be a Wasm frame on the stack that is at a GC safepoint where there are no live references at this safepoint, and there is a safepoint with live references earlier in this frame's function. Under this scenario, Wasmtime would incorrectly use the GC stack map for the safepoint from earlier in the function instead of the empty safepoint. This would result in Wasmtime treating arbitrary stack slots as `externref`s that needed to be rooted for GC. At the *next* GC, it would be determined that nothing was referencing these bogus `externref`s (because nothing could ever reference them, because they are not really `externref`s) and then Wasmtime would deallocate them and run `<ExternRef as Drop>::drop` on them. This results in a free of memory that is not necessarily on the heap (and shouldn't be freed at this moment even if it was), as well as potential out-of-bounds reads and writes. Even though support for `externref`s (via the reference types proposal) is enabled by default, unless you are creating non-null `externref`s in your host code or explicitly triggering GCs, you cannot be affected by this bug. We have reason to believe that the effective impact of this bug is relatively small because usage of `externref` is currently quite rare. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime at this time, you can avoid this bug by disabling the reference types proposal by passing `false` to `wasmtime::Config::wasm_reference_types`.

Show More

Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.19.0 and before version 0.30.0 there was a use-after-free bug when passing `externref`s from the host to guest Wasm content. To trigger the bug, you have to explicitly pass multiple `externref`s from the host to a Wasm instance at the same time, either by passing multiple `externref`s as arguments from host code to a Wasm function, or returning multiple `externref`s to Wasm from a multi-value return function de ... Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.19.0 and before version 0.30.0 there was a use-after-free bug when passing `externref`s from the host to guest Wasm content. To trigger the bug, you have to explicitly pass multiple `externref`s from the host to a Wasm instance at the same time, either by passing multiple `externref`s as arguments from host code to a Wasm function, or returning multiple `externref`s to Wasm from a multi-value return function defined in the host. If you do not have host code that matches one of these shapes, then you are not impacted. If Wasmtime's `VMExternRefActivationsTable` became filled to capacity after passing the first `externref` in, then passing in the second `externref` could trigger a garbage collection. However the first `externref` is not rooted until we pass control to Wasm, and therefore could be reclaimed by the collector if nothing else was holding a reference to it or otherwise keeping it alive. Then, when control was passed to Wasm after the garbage collection, Wasm could use the first `externref`, which at this point has already been freed. We have reason to believe that the effective impact of this bug is relatively small because usage of `externref` is currently quite rare. The bug has been fixed, and users should upgrade to Wasmtime 0.30.0. If you cannot upgrade Wasmtime yet, you can avoid the bug by disabling reference types support in Wasmtime by passing `false` to `wasmtime::Config::wasm_reference_types`.

Show More