Vulnerabilities (CVE)

IP-in-IP protocol specifies IP Encapsulation within IP standard (RFC 2003, STD 1) that decapsulate and route IP-in-IP traffic is vulnerable to spoofing, access-control bypass and other unexpected behavior due to the lack of validation to verify network packets before decapsulation and routing.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated user in possession of Administrator credentials to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific configuration CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected configuration CLI command. A successful exploit ... A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated user in possession of Administrator credentials to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific configuration CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected configuration CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root. Note: To successfully exploit this vulnerability on a Cisco NX-OS device, an attacker must have Administrator credentials. The following Cisco devices already allow administrative users to access the underlying operating system through the bash-shell feature, so, for these devices, this vulnerability does not grant any additional privileges: Nexus 3000 Series Switches Nexus 7000 Series Switches that are running Cisco NX-OS Software releases 8.1(1) and later Nexus 9000 Series Switches in standalone NX-OS mode

Show More

A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from ... A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from the affected device through CLI show commands or Simple Network Management Protocol (SNMP) requests. A successful exploit could allow the attacker to cause the LLDP service to crash and stop running on the affected device. In certain situations, the LLDP crash may result in a reload of the affected device. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol).

Show More

A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute ar ... A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198.

Show More

A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low ... A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660.

Show More

The CLI parser in Cisco NX-OS 4.1(2)E1(1), 6.2(11b), 6.2(12), 7.2(0)ZZ(99.1), 7.2(0)ZZ(99.3), and 9.1(1)SV1(3.1.8) on Nexus devices allows local users to execute arbitrary OS commands via crafted characters in a filename, aka Bug IDs CSCuv08491, CSCuv08443, CSCuv08480, CSCuv08448, CSCuu99291, CSCuv08434, and CSCuv08436.

Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.

The SNMP module in Cisco NX-OS 7.0(3)N1(1) and earlier on Nexus 5000 and 6000 devices provides different error messages for invalid requests depending on whether the VLAN ID exists, which allows remote attackers to enumerate VLANs via a series of requests, aka Bug ID CSCup85616.

The DHCP implementation in the PowerOn Auto Provisioning (POAP) feature in Cisco NX-OS does not properly restrict the initialization process, which allows remote attackers to execute arbitrary commands as root by sending crafted response packets on the local network, aka Bug ID CSCur14589.

Buffer overflow in the Smart Call Home implementation in Cisco NX-OS on Fabric Interconnects in Cisco Unified Computing System 1.4 before 1.4(1i), NX-OS 5.0 before 5.0(3)U2(2) on Nexus 3000 devices, NX-OS 4.1 before 4.1(2)E1(1l) on Nexus 4000 devices, NX-OS 5.x before 5.1(3)N1(1) on Nexus 5000 devices, NX-OS 5.2 before 5.2(3a) on Nexus 7000 devices, and CG-OS CG4 before CG4(2) on Connected 1000 Connected Grid Routers allows remote SMTP servers to execute arbitrary code via a crafted reply, aka B ... Buffer overflow in the Smart Call Home implementation in Cisco NX-OS on Fabric Interconnects in Cisco Unified Computing System 1.4 before 1.4(1i), NX-OS 5.0 before 5.0(3)U2(2) on Nexus 3000 devices, NX-OS 4.1 before 4.1(2)E1(1l) on Nexus 4000 devices, NX-OS 5.x before 5.1(3)N1(1) on Nexus 5000 devices, NX-OS 5.2 before 5.2(3a) on Nexus 7000 devices, and CG-OS CG4 before CG4(2) on Connected 1000 Connected Grid Routers allows remote SMTP servers to execute arbitrary code via a crafted reply, aka Bug IDs CSCtk00695, CSCts56633, CSCts56632, CSCts56628, CSCug14405, and CSCuf61322.

Show More

Cisco NX-OS 4.0 through 7.3 on Multilayer Director and Nexus 1000V, 2000, 3000, 3500, 4000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote authenticated users to bypass intended AAA restrictions and obtain privileged CLI access via crafted parameters in an SSH connection negotiation, aka Bug IDs CSCum35502, CSCuw78669, CSCuw79754, and CSCux88492.

Cisco NX-OS 4.1 through 7.3 and 11.0 through 11.2 on Nexus 2000, 3000, 3500, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device crash) via malformed IPv4 DHCP packets to the DHCPv4 relay agent, aka Bug IDs CSCuq39250, CSCus21733, CSCus21739, CSCut76171, and CSCux67182.

Cisco NX-OS 4.1 through 7.3 and 11.0 through 11.2 on Nexus 2000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device crash) via crafted IPv4 DHCP packets to the (1) DHCPv4 relay agent or (2) smart relay agent, aka Bug IDs CSCuq24603, CSCur93159, CSCus21693, and CSCut76171.

The JAR files on Cisco Device Manager for Cisco MDS 9000 devices before 5.2.8, and Cisco Device Manager for Cisco Nexus 5000 devices, allow remote attackers to execute arbitrary commands on Windows client machines via a crafted element-manager.jnlp file, aka Bug IDs CSCty17417 and CSCty10802.

Multiple buffer overflows in the Cisco Discovery Protocol (CDP) implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(4) and 6.x before 6.1(1), Nexus 5000 and 5500 devices 4.x and 5.x before 5.1(3)N1(1), Nexus 4000 devices before 4.1(2)E1(1h), Nexus 3000 devices 5.x before 5.0(3)U3(1), Nexus 1000V devices 4.x before 4.2(1)SV1(5.1), MDS 9000 devices 4.x and 5.x before 5.2(4), Unified Computing System (UCS) 6100 and 6200 devices before 2.0(2m), and Connected Grid Router (CGR) ... Multiple buffer overflows in the Cisco Discovery Protocol (CDP) implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(4) and 6.x before 6.1(1), Nexus 5000 and 5500 devices 4.x and 5.x before 5.1(3)N1(1), Nexus 4000 devices before 4.1(2)E1(1h), Nexus 3000 devices 5.x before 5.0(3)U3(1), Nexus 1000V devices 4.x before 4.2(1)SV1(5.1), MDS 9000 devices 4.x and 5.x before 5.2(4), Unified Computing System (UCS) 6100 and 6200 devices before 2.0(2m), and Connected Grid Router (CGR) 1000 devices before CG4(1) allow remote attackers to execute arbitrary code via malformed CDP packets, aka Bug IDs CSCtu10630, CSCtu10551, CSCtu10550, CSCtw56581, CSCtu10548, CSCtu10544, and CSCuf61275.

Show More

Cisco NX-OS on Nexus 5500 devices 4.x and 5.x before 5.0(3)N2(2), Nexus 3000 devices 5.x before 5.0(3)U3(2), and Unified Computing System (UCS) 6200 devices before 2.0(1w) allows remote attackers to cause a denial of service (device reload) by sending a jumbo packet to the management interface, aka Bug IDs CSCtx17544, CSCts10593, and CSCtx95389.

Memory leak in libcmd in Cisco NX-OS 5.0 on Nexus switches allows remote authenticated users to cause a denial of service (memory consumption) via SNMP requests, aka Bug ID CSCtr65682.

Cisco NX-OS 4.2.x before 4.2(1)SV1(5.1) on Nexus 1000v series switches; 4.x and 5.0.x before 5.0(2)N1(1) on Nexus 5000 series switches; and 4.2.x before 4.2.8, 5.0.x before 5.0.5, and 5.1.x before 5.1.1 on Nexus 7000 series switches allows remote attackers to cause a denial of service (netstack process crash and device reload) via a malformed IP packet, aka Bug IDs CSCti23447, CSCti49507, and CSCtj01991.

A vulnerability in TACACS+ and RADIUS remote authentication for Cisco NX-OS Software could allow an unauthenticated, local attacker to cause an affected device to unexpectedly reload. This vulnerability is due to incorrect input validation when processing an authentication attempt if the directed request option is enabled for TACACS+ or RADIUS. An attacker could exploit this vulnerability by entering a crafted string at the login prompt of an affected device. A successful exploit could allow the ... A vulnerability in TACACS+ and RADIUS remote authentication for Cisco NX-OS Software could allow an unauthenticated, local attacker to cause an affected device to unexpectedly reload. This vulnerability is due to incorrect input validation when processing an authentication attempt if the directed request option is enabled for TACACS+ or RADIUS. An attacker could exploit this vulnerability by entering a crafted string at the login prompt of an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a denial of service (DoS) condition.

Show More

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying op ... A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

Show More

A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an ... A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, which would cause the affected device to reload, resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Show More

A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and rest ... A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory.

Show More

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underly ... A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system. Note: The NX-API feature is disabled by default.

Show More

A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the at ... A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.

Show More

A vulnerability in the implementation of the system login block-for command for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a login process to unexpectedly restart, causing a denial of service (DoS) condition. This vulnerability is due to a logic error in the implementation of the system login block-for command when an attack is detected and acted upon. An attacker could exploit this vulnerability by performing a brute-force login attack on an affected device. A ... A vulnerability in the implementation of the system login block-for command for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a login process to unexpectedly restart, causing a denial of service (DoS) condition. This vulnerability is due to a logic error in the implementation of the system login block-for command when an attack is detected and acted upon. An attacker could exploit this vulnerability by performing a brute-force login attack on an affected device. A successful exploit could allow the attacker to cause a login process to reload, which could result in a delay during authentication to the affected device.

Show More

A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because the software improperly releases resources when it processes certain IPv6 packets that are destined to an affected device. An attacker could exploit this vulnerability by sending multiple crafted IPv6 packets to an affected device. A successful exploit could cause the network stack to run ... A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because the software improperly releases resources when it processes certain IPv6 packets that are destined to an affected device. An attacker could exploit this vulnerability by sending multiple crafted IPv6 packets to an affected device. A successful exploit could cause the network stack to run out of available buffers, impairing operations of control plane and management plane protocols and resulting in a DoS condition. Manual intervention would be required to restore normal operations on the affected device. For more information about the impact of this vulnerability, see the Details section of this advisory.

Show More

A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted Cisco UDLD protocol packets to a directly connected, affected device. A successful ex ... A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted Cisco UDLD protocol packets to a directly connected, affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco UDLD process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. The attacker needs full control of a directly connected device. That device must be connected over a port channel that has UDLD enabled. To trigger arbitrary code execution, both the UDLD-enabled port channel and specific system conditions must exist. In the absence of either the UDLD-enabled port channel or the system conditions, attempts to exploit this vulnerability will result in a DoS condition. It is possible, but highly unlikely, that an attacker could control the necessary conditions for exploitation. The CVSS score reflects this possibility. However, given the complexity of exploitation, Cisco has assigned a Medium Security Impact Rating (SIR) to this vulnerability.

Show More

A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted devi ... A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot.

Show More

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the NX-API on an affected device. An attacker could exploit this vulnerability by persuading a user of the NX-API to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the a ... A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the NX-API on an affected device. An attacker could exploit this vulnerability by persuading a user of the NX-API to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. The attacker could view and modify the device configuration. Note: The NX-API feature is disabled by default.

Show More

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software p ... A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition.

Show More

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate prop ... A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI.

Show More

A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an a ... A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.

Show More

A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A suc ... A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability.

Show More

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an a ... A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Show More

A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successfu ... A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Show More

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API s ... A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

Show More

A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could al ... A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.

Show More

A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is ... A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection.

Show More

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected devic ... A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

Show More

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A succe ... A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

Show More