Vulnerabilities (CVE)

If Brocade Fabric OS before Fabric OS 9.2.0 configuration settings are not set to encrypt SNMP passwords, then the SNMP privsecret / authsecret fields can be exposed in plaintext. The plaintext passwords can be exposed in a configupload capture or a supportsave capture if encryption of passwords is not enabled. An attacker can use these passwords to fetch values of the supported OIDs via SNMPv3 queries. There are also a limited number of MIB objects that can be modified.

Implementation of the Simple Network Management Protocol (SNMP) operating on the Brocade 6547 (FC5022) embedded switch blade, makes internal script calls to system.sh from within the SNMP binary. An authenticated attacker could perform command or parameter injection on SNMP operations that are only enabled on the Brocade 6547 (FC5022) embedded switch. This injection could allow the authenticated attacker to issue commands as Root.

A segmentation fault can occur in Brocade Fabric OS after Brocade Fabric OS v9.0 and before Brocade Fabric OS v9.2.0a through the passwdcfg command. This could allow an authenticated privileged user local user to crash a Brocade Fabric OS swith using the cli “passwdcfg --set -expire -minDiff“.

An Improper Check for Unusual or Exceptional Conditions vulnerability in Brocade Fabric OS before 9.2.2.a could allow an authenticated, network-based attacker to cause a Denial-of-Service (DoS). The vulnerability is encountered when supportsave is invoked remotely, using ssh command or SANnav inline ssh, and the corresponding ssh session is terminated with Control C (^c ) before supportsave completion. This issue affects Brocade Fabric OS 9.0.0 through 9.2.2

A command injection vulnerability in Brocade Fabric OS before 9.2.0c, and 9.2.1 through 9.2.1a on IP extension platforms could allow a local authenticated attacker to perform a privileged escalation via crafted use of the portcfg command. This specific exploitation is only possible on IP Extension platforms: Brocade 7810, Brocade 7840, Brocade 7850 and on Brocade X6 or X7 directors with an SX-6 Extension blade installed. The attacker must be logged into the switch via SSH or serial console to c ... A command injection vulnerability in Brocade Fabric OS before 9.2.0c, and 9.2.1 through 9.2.1a on IP extension platforms could allow a local authenticated attacker to perform a privileged escalation via crafted use of the portcfg command. This specific exploitation is only possible on IP Extension platforms: Brocade 7810, Brocade 7840, Brocade 7850 and on Brocade X6 or X7 directors with an SX-6 Extension blade installed. The attacker must be logged into the switch via SSH or serial console to conduct the attack.

Show More

A vulnerability in Brocade Fabric OS before 9.2.1c2 could allow an authenticated attacker with admin privileges using the shell commands “source, ping6, sleep, disown, wait to modify the path variables and move upwards in the directory structure or to traverse to different directories.

A vulnerability in Brocade Fabric OS before 9.2.1 could allow an authenticated attacker with admin privileges using the shell command “grep” to modify the path variables and move upwards in the directory structure or to traverse to different directories.

A vulnerability in Brocade Fabric OS could allow an authenticated, local attacker with privileges to access the Bash shell to access insecurely stored file contents including the history command.

A vulnerability in Brocade Fabric OS versions before 9.2.1c2 could allow an administrator-level user to execute the bind command, to escalate privileges and bypass security controls allowing the execution of arbitrary commands.

Brocade Fabric OS before 9.2.1 has a vulnerability that could allow a local authenticated attacker to reveal command line passwords using commands that may expose higher privilege sensitive information by a lower privileged user.

A vulnerability in the secure configuration of authentication and management services in Brocade Fabric OS before Fabric OS 9.2.1c2 could allow an authenticated, remote attacker with administrative credentials to execute arbitrary commands as root using “supportsave”, “seccertmgmt”, “configupload” command.

A vulnerability in Brocade Fabric OS before 9.2.1c3 could allow elevating the privileges of the local authenticated user to “root” using the export option of seccertmgmt and seccryptocfg commands.

A path transversal vulnerability in Brocade Fabric OS 9.1.0 through 9.2.2 could allow a local admin user to gain access to files outside the intended directory potentially leading to the disclosure of sensitive information. Note: Admin level privilege is required on the switch in order to exploit

A vulnerability in Brocade Fabric OS software v9.1.1, v9.0.1e, v8.2.3c, v7.4.2j, and earlier versions could allow a remote unauthenticated attacker to execute on a Brocade Fabric OS switch commands capable of modifying zoning, disabling the switch, disabling ports, and modifying the switch IP address.

Faulty input validation in the core of Apache allows malicious or exploitable backend/content generators to split HTTP responses. This issue affects Apache HTTP Server: through 2.4.58.

RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature.

Brocade Fabric OS versions starting with 9.1.0 have root access removed, however, a local user with admin privilege can potentially execute arbitrary code with full root privileges on Fabric OS versions 9.1.0 through 9.1.1d6.

scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of "anomalous argument transfers" because that could "stand a great chance of breaking existing workflows."

HTTP Response splitting in multiple modules in Apache HTTP Server allows an attacker that can inject malicious response headers into backend applications to cause an HTTP desynchronization attack. Users are recommended to upgrade to version 2.4.59, which fixes this issue.

The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.

curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly "short-cut" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumve ... curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly "short-cut" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.

Show More

curl 7.1.1 to and including 7.75.0 is vulnerable to an "Exposure of Private Personal Information to an Unauthorized Actor" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.

Several commands in Brocade Fabric OS before Brocade Fabric OS v.9.0.1e, and v9.1.0 use unsafe string functions to process user input. Authenticated local attackers could abuse these vulnerabilities to exploit stack-based buffer overflows, allowing arbitrary code execution as the root user account.

A vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5 could allow a local authenticated attacker to export out sensitive files with “seccryptocfg”, “configupload”.

A vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, and 7.4.2j could allow a local authenticated user to break out of restricted shells with “set context” and escalate privileges.

Brocade Fabric OS Web Application services before Brocade Fabric v9.1.0, v9.0.1e, v8.2.3c, v7.4.2j store server and user passwords in the debug statements. This could allow a local user to extract the passwords from a debug file.

Brocade Webtools in Brocade Fabric OS versions before Brocade Fabric OS versions v9.1.1, v9.0.1e, and v8.2.3c could allow a low privilege webtools, user, to gain elevated admin rights, or privileges, beyond what is intended or entitled for that user. By exploiting this vulnerability, a user whose role is not an admin can create a new user with an admin role using the operator session id. The issue was replicated after intercepting the admin, and operator authorization headers sent unencrypted an ... Brocade Webtools in Brocade Fabric OS versions before Brocade Fabric OS versions v9.1.1, v9.0.1e, and v8.2.3c could allow a low privilege webtools, user, to gain elevated admin rights, or privileges, beyond what is intended or entitled for that user. By exploiting this vulnerability, a user whose role is not an admin can create a new user with an admin role using the operator session id. The issue was replicated after intercepting the admin, and operator authorization headers sent unencrypted and editing a user addition request to use the operator's authorization header.

Show More

A vulnerability in the radius authentication system of Brocade Fabric OS before Brocade Fabric OS 9.0 could allow a remote attacker to execute arbitrary code on the Brocade switch.

A vulnerability in fab_seg.c.h libraries of all Brocade Fabric OS versions before Brocade Fabric OS v9.1.1, v9.0.1e, v8.2.3c, v8.2.0_cbn5, 7.4.2j could allow local authenticated attackers to exploit stack-based buffer overflows and execute arbitrary code as the root user account.

A vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5, 7.4.2.j could allow a remote authenticated attacker to perform stack buffer overflow using in “firmwaredownload” and “diagshow” commands.

A privilege escalation vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5, could allow a local authenticated user to escalate its privilege to root using switch commands “supportlink”, “firmwaredownload”, “portcfgupload, license, and “fosexec”.

An information disclosure vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5, 7.4.2.j could allow a local authenticated attacker to read sensitive files using switch commands “configshow” and “supportlink”.

A privilege escalation vulnerability in Brocade Fibre Channel SAN products running Brocade Fabric OS (FOS) releases earlier than v7.4.1d and v8.0.1b could allow an authenticated attacker to elevate the privileges of user accounts accessing the system via command line interface. With affected versions, non-root users can gain root access with a combination of shell commands and parameters.

HPE FOS before 7.4.1d and 8.x before 8.0.1 on StoreFabric B switches allows remote attackers to obtain sensitive information via unspecified vectors.

Engenio/LSI Logic storage controllers, as used in products such as Storagetek D280, and IBM DS4100 (formerly FastT 100) and Brocade SilkWorm Switches, allow remote attackers to cause a denial of service (freeze and possible data corruption) via crafted TCP packets.

A vulnerability in Brocade Fabric OS versions 7.4.1b and 7.3.1d could allow local users to conduct privileged directory transversal. Brocade Fabric OS versions 7.4.1.x and 7.3.x have reached end of life. Brocade Fabric OS Users should upgrade to supported versions as described in the Product End-of-Life published report.

Brocade Web Interface in Brocade Fabric OS v9.x and before v9.2.0 does not properly represent the portName to the user if the portName contains reserved characters. This could allow an authenticated user to alter the UI of the Brocade Switch and change ports display.

In Brocade Fabric OS before v9.2.0a, a local authenticated privileged user can trigger a buffer overflow condition, leading to a kernel panic with large input to buffers in the portcfgfportbuffers command.

The firmwaredownload command on Brocade Fabric OS v9.2.0 could log the FTP/SFTP/SCP server password in clear text in the SupportSave file when performing a downgrade from Fabric OS v9.2.0 to any earlier version of Fabric OS.

Remote code execution (RCE) vulnerability in Brocade Fabric OS after v9.0 and before v9.2.0 could allow an attacker to execute arbitrary code and use this to gain root access to the Brocade switch.