Vulnerabilities (CVE)

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP ... ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP Length field covers only the header and flags but omits the expected payload (such as the 2-byte Message Length field when WPS_MSG_FLAG_LEN is set), frag_len becomes negative. This negative value is then implicitly cast to size_t when passed to wpabuf_put_data(), resulting in a very large unsigned value. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.

Show More

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, an out-of-bounds read vulnerability was reported in the BLE ATT Prepare Write handling of the BLE provisioning transport (protocomm_ble). The issue can be triggered by a remote BLE client while the device is in provisioning mode. The transport accumulated prepared-write fragments in a fixed-size buffer but incorrectly tracked the cumulative length. By sending repeated prepa ... ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, an out-of-bounds read vulnerability was reported in the BLE ATT Prepare Write handling of the BLE provisioning transport (protocomm_ble). The issue can be triggered by a remote BLE client while the device is in provisioning mode. The transport accumulated prepared-write fragments in a fixed-size buffer but incorrectly tracked the cumulative length. By sending repeated prepare write requests with overlapping offsets, a remote client could cause the reported length to exceed the allocated buffer size. This inflated length was then passed to provisioning handlers during execute-write processing, resulting in an out-of-bounds read and potential memory corruption. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.

Show More

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a use-after-free vulnerability was reported in the BLE provisioning transport (protocomm_ble) layer. The issue can be triggered by a remote BLE client while the device is in provisioning mode. The vulnerability occurred when provisioning was stopped with keep_ble_on = true. In this configuration, internal protocomm_ble state and GATT metadata were freed while the BLE stack ... ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a use-after-free vulnerability was reported in the BLE provisioning transport (protocomm_ble) layer. The issue can be triggered by a remote BLE client while the device is in provisioning mode. The vulnerability occurred when provisioning was stopped with keep_ble_on = true. In this configuration, internal protocomm_ble state and GATT metadata were freed while the BLE stack and GATT services remained active. Subsequent BLE read or write callbacks dereferenced freed memory, allowing a connected or newly connected client to trigger invalid memory acces. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.

Show More

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, when AVRCP is enabled on ESP32, receiving a malformed VENDOR DEPENDENT command from a peer device can cause the Bluetooth stack to access memory before validating the command buffer length. This may lead to an out-of-bounds read, potentially exposing unintended memory content or causing unexpected behavior.

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. An integer underflow vulnerability has been identified in the ESP-NOW protocol implementation within the ESP Wi-Fi component of versions 5.4.1, 5.3.3, 5.2.5, and 5.1.6 of the ESP-IDF framework. This issue stems from insufficient validation of user-supplied data length in the packet receive function. Under certain conditions, this may lead to out-of-bounds memory access and may allow arbitrary memory write operations. On sys ... ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. An integer underflow vulnerability has been identified in the ESP-NOW protocol implementation within the ESP Wi-Fi component of versions 5.4.1, 5.3.3, 5.2.5, and 5.1.6 of the ESP-IDF framework. This issue stems from insufficient validation of user-supplied data length in the packet receive function. Under certain conditions, this may lead to out-of-bounds memory access and may allow arbitrary memory write operations. On systems without a memory protection scheme, this behavior could potentially be used to achieve remote code execution (RCE) on the target device. In versions 5.4.2, 5.3.4, 5.2.6, and 5.1.6, ESP-NOW has added more comprehensive validation logic on user-supplied data length during packet reception to prevent integer underflow caused by negative value calculations. For ESP-IDF v5.3 and earlier, a workaround can be applied by validating that the `data_len` parameter received in the RX callback (registered via `esp_now_register_recv_cb()`) is a positive value before further processing. For ESP-IDF v5.4 and later, no application-level workaround is available. Users are advised to upgrade to a patched version of ESP-IDF to take advantage of the built-in mitigation.

Show More

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. The BluFi example bundled in ESP-IDF was vulnerable to memory overflows in two areas: Wi-Fi credential handling and Diffie–Hellman key exchange. This vulnerability is fixed in 5.4.1, 5.3.3, 5.1.6, and 5.0.9.

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the ESP-IDF Bluetooth host stack (BlueDroid), the function bta_dm_sdp_result() used a fixed-size array uuid_list[32][MAX_UUID_SIZE] to store discovered service UUIDs during the SDP (Service Discovery Protocol) process. On modern Bluetooth devices, it is possible for the number of available services to exceed this fixed limit (32). In such cases, if more than 32 ... ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the ESP-IDF Bluetooth host stack (BlueDroid), the function bta_dm_sdp_result() used a fixed-size array uuid_list[32][MAX_UUID_SIZE] to store discovered service UUIDs during the SDP (Service Discovery Protocol) process. On modern Bluetooth devices, it is possible for the number of available services to exceed this fixed limit (32). In such cases, if more than 32 services are discovered, subsequent writes to uuid_list could exceed the bounds of the array, resulting in a potential out-of-bounds write condition.

Show More

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the avrc_vendor_msg() function of the ESP-IDF BlueDroid AVRCP stack, the allocated buffer size was validated using AVRC_MIN_CMD_LEN (20 bytes). However, the actual fixed header data written before the vendor payload exceeds this value. This totals 29 bytes written before p_msg->p_vendor_data is copied. Using the old AVRC_MIN_CMD_LEN could allow an out-of-bounds ... ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the avrc_vendor_msg() function of the ESP-IDF BlueDroid AVRCP stack, the allocated buffer size was validated using AVRC_MIN_CMD_LEN (20 bytes). However, the actual fixed header data written before the vendor payload exceeds this value. This totals 29 bytes written before p_msg->p_vendor_data is copied. Using the old AVRC_MIN_CMD_LEN could allow an out-of-bounds write if vendor_len approaches the buffer limit. For commands where vendor_len is large, the original buffer allocation may be insufficient, causing writes beyond the allocated memory. This can lead to memory corruption, crashes, or other undefined behavior. The overflow could be larger when assertions are disabled.

Show More

An issue in Espressif Esp idf v5.3.0 allows attackers to cause a Denial of Service (DoS) via a crafted data channel packet.

Buffer Overflow vulnerability in esp-idf v.5.1 allows a remote attacker to obtain sensitive information via the externalId component.

Buffer Overflow vulnerability in esp-idf v.5.1 allows a remote attacker to execute arbitrary code via a crafted script to the Bluetooth stack component.

Espressif Esp idf v5.3.0 is vulnerable to Insecure Permissions resulting in Authentication bypass. In the reconnection phase, the device reuses the session key from a previous connection session, creating an opportunity for attackers to execute security bypass attacks.

ESP-IDF is the development framework for Espressif SoCs supported on Windows, Linux and macOS. A Time-of-Check to Time-of-Use (TOCTOU) vulnerability was discovered in the implementation of the ESP-IDF bootloader which could allow an attacker with physical access to flash of the device to bypass anti-rollback protection. Anti-rollback prevents rollback to application with security version lower than one programmed in eFuse of chip. This attack can allow to boot past (passive) application partitio ... ESP-IDF is the development framework for Espressif SoCs supported on Windows, Linux and macOS. A Time-of-Check to Time-of-Use (TOCTOU) vulnerability was discovered in the implementation of the ESP-IDF bootloader which could allow an attacker with physical access to flash of the device to bypass anti-rollback protection. Anti-rollback prevents rollback to application with security version lower than one programmed in eFuse of chip. This attack can allow to boot past (passive) application partition having lower security version of the same device even in the presence of the flash encryption scheme. The attack requires carefully modifying the flash contents after the anti-rollback checks have been performed by the bootloader (before loading the application). The vulnerability is fixed in 4.4.7 and 5.2.1.

Show More

ESP-IDF is the official development framework for Espressif SoCs. In Espressif’s Bluetooth Mesh SDK (`ESP-BLE-MESH`), a memory corruption vulnerability can be triggered during provisioning, because there is no check for the `SegN` field of the Transaction Start PDU. This can result in memory corruption related attacks and potentially attacker gaining control of the entire system. Patch commits are available on the 4.1, 4.2, 4.3 and 4.4 branches and users are recommended to upgrade. The upgrade i ... ESP-IDF is the official development framework for Espressif SoCs. In Espressif’s Bluetooth Mesh SDK (`ESP-BLE-MESH`), a memory corruption vulnerability can be triggered during provisioning, because there is no check for the `SegN` field of the Transaction Start PDU. This can result in memory corruption related attacks and potentially attacker gaining control of the entire system. Patch commits are available on the 4.1, 4.2, 4.3 and 4.4 branches and users are recommended to upgrade. The upgrade is applicable for all applications and users of `ESP-BLE-MESH` component from `ESP-IDF`. As it is implemented in the Bluetooth Mesh stack, there is no workaround for the user to fix the application layer without upgrading the underlying firmware.

Show More

The Bluetooth Classic implementation in Espressif ESP-IDF 4.4 and earlier does not properly restrict the Feature Page upon reception of an LMP Feature Response Extended packet, allowing attackers in radio range to trigger arbitrary code execution in ESP32 via a crafted Extended Features bitfield payload.

The Bluetooth Classic implementation in Espressif ESP-IDF 4.4 and earlier does not properly handle the reception of multiple LMP IO Capability Request packets during the pairing process, allowing attackers in radio range to trigger memory corruption (and consequently a crash) in ESP32 via a replayed (duplicated) LMP packet.

The Bluetooth Classic implementation in Espressif ESP-IDF 4.4 and earlier does not properly handle the reception of continuous unsolicited LMP responses, allowing attackers in radio range to trigger a denial of service (crash) in ESP32 by flooding the target device with LMP Feature Response data.

Espressif ESP-IDF 2.x, 3.0.x through 3.0.9, 3.1.x through 3.1.7, 3.2.x through 3.2.3, 3.3.x through 3.3.2, and 4.0.x through 4.0.1 has a Buffer Overflow in BluFi provisioning in btc_blufi_recv_handler function in blufi_prf.c. An attacker can send a crafted BluFi protocol Write Attribute command to characteristic 0xFF01. With manipulated packet fields, there is a buffer overflow.

The Bluetooth Low Energy (BLE) controller implementation in Espressif ESP-IDF 4.0 through 4.2 (for ESP32 devices) returns the wrong number of completed BLE packets and triggers a reachable assertion on the host stack when receiving a packet with an MIC failure. An attacker within radio range can silently trigger the assertion (which disables the target's BLE stack) by sending a crafted sequence of BLE packets.

The Bluetooth Low Energy (BLE) controller implementation in Espressif ESP-IDF 4.2 and earlier (for ESP32 devices) does not properly restrict the channel map field of the connection request packet on reception, allowing attackers in radio range to cause a denial of service (crash) via a crafted packet.

An encryption-bypass issue was discovered on Espressif ESP-IDF devices through 4.2, ESP8266_NONOS_SDK devices through 3.0.3, and ESP8266_RTOS_SDK devices through 3.3. Broadcasting forged beacon frames forces a device to change its authentication mode to OPEN, effectively disabling its 802.11 encryption.

An issue was discovered in Espressif ESP-IDF 2.x, 3.0.x through 3.0.9, 3.1.x through 3.1.6, 3.2.x through 3.2.3, and 3.3.x through 3.3.1. An attacker who uses fault injection to physically disrupt the ESP32 CPU can bypass the Secure Boot digest verification at startup, and boot unverified code from flash. The fault injection attack does not disable the Flash Encryption feature, so if the ESP32 is configured with the recommended combination of Secure Boot and Flash Encryption, then the impact is ... An issue was discovered in Espressif ESP-IDF 2.x, 3.0.x through 3.0.9, 3.1.x through 3.1.6, 3.2.x through 3.2.3, and 3.3.x through 3.3.1. An attacker who uses fault injection to physically disrupt the ESP32 CPU can bypass the Secure Boot digest verification at startup, and boot unverified code from flash. The fault injection attack does not disable the Flash Encryption feature, so if the ESP32 is configured with the recommended combination of Secure Boot and Flash Encryption, then the impact is minimized. If the ESP32 is configured without Flash Encryption then successful fault injection allows arbitrary code execution. To protect devices with Flash Encryption and Secure Boot enabled against this attack, a firmware change must be made to permanently enable Flash Encryption in the field if it is not already permanently enabled.

Show More

The EAP peer implementation in Espressif ESP-IDF 2.0.0 through 4.0.0 and ESP8266_NONOS_SDK 2.2.0 through 3.1.0 allows the installation of a zero Pairwise Master Key (PMK) after the completion of any EAP authentication method, which allows attackers in radio range to replay, decrypt, or spoof frames via a rogue access point.

The EAP peer implementation in Espressif ESP-IDF 2.0.0 through 4.0.0 and ESP8266_NONOS_SDK 2.2.0 through 3.1.0 processes EAP Success messages before any EAP method completion or failure, which allows attackers in radio range to cause a denial of service (crash) via a crafted message.

An issue was discovered in Espressif ESP-IDF 2.x and 3.x before 3.0.6 and 3.1.x before 3.1.1. Insufficient validation of input data in the 2nd stage bootloader allows a physically proximate attacker to bypass secure boot checks and execute arbitrary code, by crafting an application binary that overwrites a bootloader code segment in process_segment in components/bootloader_support/src/esp_image_format.c. The attack is effective when the flash encryption feature is not enabled, or if the attacker ... An issue was discovered in Espressif ESP-IDF 2.x and 3.x before 3.0.6 and 3.1.x before 3.1.1. Insufficient validation of input data in the 2nd stage bootloader allows a physically proximate attacker to bypass secure boot checks and execute arbitrary code, by crafting an application binary that overwrites a bootloader code segment in process_segment in components/bootloader_support/src/esp_image_format.c. The attack is effective when the flash encryption feature is not enabled, or if the attacker finds a different vulnerability that allows them to write this binary to flash memory.

Show More