Vulnerabilities (CVE)

A stack buffer overflow vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin in the rc binary's USB storage handling module. The vulnerability occurs when the "Serial Number" field from a USB device is read via sscanf into a 64-byte stack buffer, while fgets reads up to 127 bytes, causing a stack overflow. An attacker with physical access or control over a USB device can exploit this vulnerability to potentially execute arbitrary code on the device.

An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDynamicDNSSettings' functionality, where the 'ServerAddress' and 'Hostname' parameters in prog.cgi are stored in NVRAM and later used by rc to construct system commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution ... An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDynamicDNSSettings' functionality, where the 'ServerAddress' and 'Hostname' parameters in prog.cgi are stored in NVRAM and later used by rc to construct system commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

Show More

An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDMZSettings' functionality, where the 'IPAddress' parameter in prog.cgi is stored in NVRAM and later used by librcm.so to construct iptables commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetNetworkSettings' functionality of prog.cgi, where the 'IPAddress' and 'SubnetMask' parameters are directly concatenated into shell commands executed via system(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

A vulnerability classified as problematic has been found in D-Link DIR-878 1.03. Affected is an unknown function of the file /dllog.cgi of the component HTTP POST Request Handler. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR878 1.30B08 Hotfix_04 was discovered to contain a command injection vulnerability via the component /bin/proc.cgi.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the IPAddress parameter in the SetGuestZoneRouterSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the MacAddress parameter in the SetMACFilters2 function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the LocalIPAddress, TCPPorts, and UDPPorts parameters in the SetPortForwardingSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the SSID parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the ExternalPort, InternalPort, ProtocolNumber, and LocalIPAddress parameters in the SetVirtualServerSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the key parameter in the SetWLanRadioSecurity function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:2/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:1/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:0/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the SubnetMask parameter in the SetGuestZoneRouterSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR-878 1.02B05 is vulnerable to Incorrect Access Control.

D-Link DIR878 1.02B04 and 1.02B05 are vulnerable to Buffer Overflow.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_495220 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_48AF78 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_475FB0 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR878 1.30B08 was discovered to contain a stack overflow in the sub_48d630 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

A vulnerability classified as critical was found in D-Link DAP-1360, DIR-300, DIR-615, DIR-615GF, DIR-615S, DIR-615T, DIR-620, DIR-620S, DIR-806A, DIR-815, DIR-815AC, DIR-815S, DIR-816, DIR-820, DIR-822, DIR-825, DIR-825AC, DIR-825ACF, DIR-825ACG1, DIR-841, DIR-842, DIR-842S, DIR-843, DIR-853, DIR-878, DIR-882, DIR-1210, DIR-1260, DIR-2150, DIR-X1530, DIR-X1860, DSL-224, DSL-245GR, DSL-2640U, DSL-2750U, DSL-G2452GR, DVG-5402G, DVG-5402G, DVG-5402GFRU, DVG-N5402G, DVG-N5402G-IL, DWM-312W, DWM-321 ... A vulnerability classified as critical was found in D-Link DAP-1360, DIR-300, DIR-615, DIR-615GF, DIR-615S, DIR-615T, DIR-620, DIR-620S, DIR-806A, DIR-815, DIR-815AC, DIR-815S, DIR-816, DIR-820, DIR-822, DIR-825, DIR-825AC, DIR-825ACF, DIR-825ACG1, DIR-841, DIR-842, DIR-842S, DIR-843, DIR-853, DIR-878, DIR-882, DIR-1210, DIR-1260, DIR-2150, DIR-X1530, DIR-X1860, DSL-224, DSL-245GR, DSL-2640U, DSL-2750U, DSL-G2452GR, DVG-5402G, DVG-5402G, DVG-5402GFRU, DVG-N5402G, DVG-N5402G-IL, DWM-312W, DWM-321, DWR-921, DWR-953 and Good Line Router v2 up to 20240112. This vulnerability affects unknown code of the file /devinfo of the component HTTP GET Request Handler. The manipulation of the argument area with the input notice|net|version leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251542 is the identifier assigned to this vulnerability.

Show More

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple D-Link routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the lighttpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in ... This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple D-Link routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the lighttpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13796.

Show More

D-Link DIR-878 has inadequate filtering for special characters in the webpage input field. An unauthenticated LAN attacker can perform command injection attack to execute arbitrary system commands to control the system or disrupt service.

A command injection vulnerability in the protest binary allows an attacker with access to the remote command line interface to execute arbitrary commands as root.

D-Link device DIR_878_FW1.30B08_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link devices DIR_878 DIR_878_FW1.30B08_Hotfix_02 and DIR_882 DIR_882_FW1.30B06_Hotfix_02 were discovered to contain a command injection vulnerability in the system function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper handling of empty passwords. An attacker can leverage this vulnerability to execute arbitrary code on the router. Was ZDI-CAN-9471.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of th ... This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell meta ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metachara ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell meta ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharac ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metac ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters i ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metac ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.

Show More

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharact ... An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

Show More