Vulnerabilities (CVE)

RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature.

Under certain error conditions at time of SANnav installation or upgrade, the encryption key can be written into and obtained from a Brocade SANnav supportsave. An attacker with privileged access to the Brocade SANnav database could use the encryption key to obtain passwords used by Brocade SANnav.

By default, SANnav OVA is shipped with root user login enabled. While protected by a password, access to root could expose SANnav to a remote attacker should they gain access to the root account.

Brocade SANnav before SANnav 2.4.0a logs plaintext passphrases in the Brocade SANnav host server audit logs while executing OpenSSL command using a passphrase from the command line or while providing the passphrase through a temporary file. These audit logs are the local server VM’s audit logs and are not controlled by SANnav. These logs are only visible to the server admin of the host server and are not visible to the SANnav admin or any SANnav user.

Brocade SANnav before SANnav 2.4.0a logs passwords and pbe keys in the Brocade SANnav server audit logs after installation and under specific conditions. These audit logs are the local server VM’s audit logs and are not controlled by SANnav. These logs are only visible to the server admin of the host server and are not visible to the SANnav admin or any SANnav user.

Brocade SANnav before Brocade SANnav 2.4.0a could log database passwords in clear text in audit logs when the daily data dump collector invokes docker exec commands. These audit logs are the local server VM’s audit logs and are not controlled by SANnav. These logs are only visible to the server admin of the host server and are not visible to the SANnav admin or any SANnav user.

CalInvocationHandler in Brocade SANnav before 2.3.1b logs sensitive information in clear text. The vulnerability could allow an authenticated, local attacker to view Brocade Fabric OS switch sensitive information in clear text. An attacker with administrative privileges could retrieve sensitive information including passwords; SNMP responses that contain AuthSecret and PrivSecret after collecting a “supportsave” or getting access to an already collected “supportsave”. NOTE: this issue exi ... CalInvocationHandler in Brocade SANnav before 2.3.1b logs sensitive information in clear text. The vulnerability could allow an authenticated, local attacker to view Brocade Fabric OS switch sensitive information in clear text. An attacker with administrative privileges could retrieve sensitive information including passwords; SNMP responses that contain AuthSecret and PrivSecret after collecting a “supportsave” or getting access to an already collected “supportsave”. NOTE: this issue exists because of an incomplete fix for CVE-2024-29952

Show More

Docker daemon in Brocade SANnav before SANnav 2.3.1b runs without auditing. The vulnerability could allow a remote authenticated attacker to execute various attacks.

Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network.

Brocade SANnav OVA before SANnav 2.3.1b enables SHA1 deprecated setting for SSH for port 22.

JMSSink in all versions of Log4j 1.x is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration or if the configuration references an LDAP service the attacker has access to. The attacker can provide a TopicConnectionFactoryBindingName configuration causing JMSSink to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-4104. Note this issue only affects Log4j 1.x when specifically configured to use JMSS ... JMSSink in all versions of Log4j 1.x is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration or if the configuration references an LDAP service the attacker has access to. The attacker can provide a TopicConnectionFactoryBindingName configuration causing JMSSink to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-4104. Note this issue only affects Log4j 1.x when specifically configured to use JMSSink, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions.

Show More

Brocade SANnav Web interface before Brocade SANnav v2.3.0 and v2.2.2a allows remote unauthenticated users to bypass web authentication and authorization.

Possible information exposure through log file vulnerability where sensitive fields are recorded in the configuration log without masking on Brocade SANnav before v2.3.0 and 2.2.2a. Notes: To access the logs, the local attacker must have access to an already collected Brocade SANnav "supportsave" outputs.

The PostgreSQL implementation in Brocade SANnav versions before 2.3.0a is vulnerable to an incorrect local authentication flaw. An attacker accessing the VM where the Brocade SANnav is installed can gain access to sensitive data inside the PostgreSQL database.

A vulnerability in Brocade SANnav exposes Kafka in the wan interface. The vulnerability could allow an unauthenticated attacker to perform various attacks, including DOS against the Brocade SANnav.

In Brocade SANnav, before Brocade SANnav v2.3.0, syslog traffic received clear text. This could allow an unauthenticated, remote attacker to capture sensitive information.

Brocade SANnav before v2.3.0a lacks protection mechanisms on port 2377/TCP and 7946/TCP, which could allow an unauthenticated attacker to sniff the SANnav Docker information.

Brocade SANnav versions before 2.2.2 log Brocade Fabric OS switch passwords when debugging is enabled.

Possible information exposure through log file vulnerability where sensitive fields are recorded in the debug-enabled logs when debugging is turned on in Brocade SANnav before 2.3.0 and 2.2.2a

An information exposure through log file vulnerability exists in Brocade SANnav before Brocade SANnav 2.2.2, where Brocade Fabric OS Switch passwords and authorization IDs are printed in the embedded MLS DB file.

Brocade SANnav before Brocade SANnav 2.2.2 supports key exchange algorithms, which are considered weak on ports 24, 6514, 18023, 19094, and 19095.

An information exposure through log file vulnerability exists in Brocade SANnav before Brocade SANnav 2.2.2, where configuration secrets are logged in supportsave. Supportsave file is generated by an admin user troubleshooting the switch. The Logged information may include usernames and passwords, and secret keys.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow a privileged user to print the SANnav encrypted key in PostgreSQL startup logs. This could provide attackers with an additional, less-protected path to acquiring the encryption key.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

Brocade SANnav before v2.3.1 and v2.3.0a uses the SHA-1 hash in internal SSH ports that are not open to remote connection.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the Brocade SANnav password in clear text in supportsave logs when a user schedules a switch Supportsave from Brocade SANnav.

When Brocade SANnav before v2.3.1 and v2.3.0a servers are configured in Disaster Recovery mode, the encryption key is stored in the DR log files. This could provide attackers with an additional, less-protected path to acquiring the encryption key.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the encryption key in the console when a privileged user executes the script to replace the Brocade SANnav Management Portal standby node. This could provide attackers an additional, less protected path to acquiring the encryption key.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints Brocade Fabric OS switch encrypted passwords in the Brocade SANnav Standby node's support save.

In Brocade SANnav server before v2.3.1 and v2.3.0a, the SSH keys inside the OVA image are identical in the VM every time SANnav is installed. Any Brocade SAnnav VM based on the official OVA images is vulnerable to MITM over SSH. An attacker can decrypt and compromise the SSH traffic to the SANnav.

A vulnerability affects Brocade SANnav before v2.3.1 and v2.3.0a. It allows a Brocade SANnav service to send ping commands in the background at regular intervals to gridgain.com to check if updates are available for the Component. This could make an unauthenticated, remote attacker aware of the behavior and launch a supply-chain attack against a Brocade SANnav appliance.

Brocade SANnav OVA before v2.3.1, and v2.3.0a, contain hardcoded TLS keys used by Docker. Note: Brocade SANnav doesn't have access to remote Docker registries.

Brocade SANnav OVA before v2.3.1 and v2.3.0a have an insecure file permission setting that makes files world-readable. This could allow a local user without the required privileges to access sensitive information or a Java binary.

Brocade SANnav versions before v2.3.0a do not correctly set permissions on files, including docker files. An unprivileged attacker who gains access to the server can read sensitive information from these files.

In Brocade SANnav before v2.3.1, and v2.3.0a, it is possible to back up the appliance from the web interface or the command line interface ("SSH"). The resulting backups are world-readable. A local attacker can recover backup files, restore them to a new malicious appliance, and retrieve the passwords of all the switches.

Brocade SANnav OVA before v2.3.1 and v2.3.0a contain hard-coded credentials in the documentation that appear as the appliance's root password. The vulnerability could allow an unauthenticated attacker full access to the Brocade SANnav appliance.

In Brocade SANnav before Brocade SANnav v2.31 and v2.3.0a, it was observed that Docker instances inside the appliance have insecure mount points, allowing reading and writing access to sensitive files. The vulnerability could allow a sudo privileged user on the host OS to read and write access to these files.

An information disclosure vulnerability exists in Brocade SANnav before v2.3.1 and v2.3.0a when Brocade SANnav instances are configured in disaster recovery mode. SQL Table names, column names, and SQL queries are collected in DR standby Supportsave. This could allow authenticated users to access the database structure and its contents.

When a Brocade SANnav installation is upgraded from Brocade SANnav v2.2.2 to Brocade SANnav 2.3.0, TLS/SSL weak message authentication code ciphers are added by default for port 18082.

The class FileTransfer implemented in Brocade SANnav before v2.3.1, v2.3.0a, uses the ssh-rsa signature scheme, which has a SHA-1 hash. The vulnerability could allow a remote, unauthenticated attacker to perform a man-in-the-middle attack.