Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note th ... In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: bme680: Fix overflows in compensate() functions There are cases in the compensate functions of the driver that there could be overflows of variables due to bit shifting ops. These implications were initially discussed here [1] and they were mentioned in log message of Commit 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor"). [1]: https://lore.kernel.org/linux-iio/20180728114028.3c1bbe81@archli ... In the Linux kernel, the following vulnerability has been resolved: iio: chemical: bme680: Fix overflows in compensate() functions There are cases in the compensate functions of the driver that there could be overflows of variables due to bit shifting ops. These implications were initially discussed here [1] and they were mentioned in log message of Commit 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor"). [1]: https://lore.kernel.org/linux-iio/20180728114028.3c1bbe81@archlinux/

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system to enter suspend status with below command: echo mem > /sys/power/state There will be a deadlock issue occurring. Detailed invoking path as below: dwc3_suspend_common() spin_lock_irqsave(&dwc->lock, flags); <-- 1st dwc3_gadget_suspend(dwc); dw ... In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system to enter suspend status with below command: echo mem > /sys/power/state There will be a deadlock issue occurring. Detailed invoking path as below: dwc3_suspend_common() spin_lock_irqsave(&dwc->lock, flags); <-- 1st dwc3_gadget_suspend(dwc); dwc3_gadget_soft_disconnect(dwc); spin_lock_irqsave(&dwc->lock, flags); <-- 2nd This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") that removes the code of checking whether dwc->gadget_driver is NULL or not. It causes the following code is executed and deadlock occurs when trying to get the spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3: Remove DWC3 locking during gadget suspend/resume") that forgot to remove the lock of otg mode. So, remove the redundant lock of otg mode during gadget suspend/resume.

Show More

In the Linux kernel, the following vulnerability has been resolved: ftruncate: pass a signed offset The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate( ... In the Linux kernel, the following vulnerability has been resolved: ftruncate: pass a signed offset The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate() syscall and the corresponding loff_t based variants are all correct already and do not suffer from this mistake.

Show More

In the Linux kernel, the following vulnerability has been resolved: xdp: Remove WARN() from __xdp_reg_mem_model() syzkaller reports a warning in __xdp_reg_mem_model(). The warning occurs only if __mem_id_init_hash_table() returns an error. It returns the error in two cases: 1. memory allocation fails; 2. rhashtable_init() fails when some fields of rhashtable_params struct are not initialized properly. The second case cannot happen since there is a static const rhashtable_params str ... In the Linux kernel, the following vulnerability has been resolved: xdp: Remove WARN() from __xdp_reg_mem_model() syzkaller reports a warning in __xdp_reg_mem_model(). The warning occurs only if __mem_id_init_hash_table() returns an error. It returns the error in two cases: 1. memory allocation fails; 2. rhashtable_init() fails when some fields of rhashtable_params struct are not initialized properly. The second case cannot happen since there is a static const rhashtable_params struct with valid fields. So, warning is only triggered when there is a problem with memory allocation. Thus, there is no sense in using WARN() to handle this error and it can be safely removed. WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 Call Trace: xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344 xdp_test_run_setup net/bpf/test_run.c:188 [inline] bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377 bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267 bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240 __sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649 __do_sys_bpf kernel/bpf/syscall.c:5738 [inline] __se_sys_bpf kernel/bpf/syscall.c:5736 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/restrack: Fix potential invalid address access struct rdma_restrack_entry's kern_name was set to KBUILD_MODNAME in ib_create_cq(), while if the module exited but forgot del this rdma_restrack_entry, it would cause a invalid address access in rdma_restrack_clean() when print the owner of this rdma_restrack_entry. These code is used to help find one forgotten PD release in one of the ULPs. But it is not needed anymore, so ... In the Linux kernel, the following vulnerability has been resolved: RDMA/restrack: Fix potential invalid address access struct rdma_restrack_entry's kern_name was set to KBUILD_MODNAME in ib_create_cq(), while if the module exited but forgot del this rdma_restrack_entry, it would cause a invalid address access in rdma_restrack_clean() when print the owner of this rdma_restrack_entry. These code is used to help find one forgotten PD release in one of the ULPs. But it is not needed anymore, so delete them.

Show More

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix DIO failure due to insufficient transaction credits The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have ... In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix DIO failure due to insufficient transaction credits The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Show More

In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: Initialize unused data in j1939_send_one() syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter ... In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: Initialize unused data in j1939_send_one() syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] memcpy_to_msg include/linux/skbuff.h:4113 [inline] raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803 ___sys_recvmsg+0x223/0x840 net/socket.c:2845 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1313 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 sock_alloc_send_skb include/net/sock.h:1842 [inline] j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline] j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline] j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 12-15 of 16 are uninitialized Memory access of size 16 starts at ffff888120969690 Data copied to user address 00000000200017c0 CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024

Show More

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the regis ... In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Show More

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers.

In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro() set_memory_ro() can fail, leaving memory unprotected. Check its return and take it into account as an error.

In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf prog stack with kmsan_unposion_memory in interpreter mode syzbot reported uninit memory usages during map_{lookup,delete}_elem. ========== BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 ... In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf prog stack with kmsan_unposion_memory in interpreter mode syzbot reported uninit memory usages during map_{lookup,delete}_elem. ========== BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline] dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796 ____bpf_map_lookup_elem kernel/bpf/helpers.c:42 [inline] bpf_map_lookup_elem+0x5c/0x80 kernel/bpf/helpers.c:38 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run256+0xb5/0xe0 kernel/bpf/core.c:2237 ========== The reproducer should be in the interpreter mode. The C reproducer is trying to run the following bpf prog: 0: (18) r0 = 0x0 2: (18) r1 = map[id:49] 4: (b7) r8 = 16777216 5: (7b) *(u64 *)(r10 -8) = r8 6: (bf) r2 = r10 7: (07) r2 += -229 ^^^^^^^^^^ 8: (b7) r3 = 8 9: (b7) r4 = 0 10: (85) call dev_map_lookup_elem#1543472 11: (95) exit It is due to the "void *key" (r2) passed to the helper. bpf allows uninit stack memory access for bpf prog with the right privileges. This patch uses kmsan_unpoison_memory() to mark the stack as initialized. This should address different syzbot reports on the uninit "void *key" argument during map_{lookup,delete}_elem.

Show More

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) ... In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally.

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix endpoint checking in cxacru_bind() Syzbot is still reporting quite an old issue [1] that occurs due to incomplete checking of present usb endpoints. As such, wrong endpoints types may be used at urb sumbitting stage which in turn triggers a warning in usb_submit_urb(). Fix the issue by verifying that required endpoint types are present for both in and out endpoints, taking into account cmd endpoint type. ... In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix endpoint checking in cxacru_bind() Syzbot is still reporting quite an old issue [1] that occurs due to incomplete checking of present usb endpoints. As such, wrong endpoints types may be used at urb sumbitting stage which in turn triggers a warning in usb_submit_urb(). Fix the issue by verifying that required endpoint types are present for both in and out endpoints, taking into account cmd endpoint type. Unfortunately, this patch has not been tested on real hardware. [1] Syzbot report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 ... Call Trace: cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649 cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760 cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209 usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055 cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:517 [inline] really_probe+0x23c/0xcd0 drivers/base/dd.c:595 __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777 __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427 __device_attach+0x228/0x4a0 drivers/base/dd.c:965 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487 device_add+0xc2f/0x2180 drivers/base/core.c:3354 usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293

Show More

In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Fix UAF in msi_capability_init KFENCE reports the following UAF: BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488 Use-after-free read at 0x0000000024629571 (in kfence-#12): __pci_enable_msi_range+0x2c0/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128 allocated by task 81 on ... In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Fix UAF in msi_capability_init KFENCE reports the following UAF: BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488 Use-after-free read at 0x0000000024629571 (in kfence-#12): __pci_enable_msi_range+0x2c0/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128 allocated by task 81 on cpu 7 at 10.808142s: __kmem_cache_alloc_node+0x1f0/0x2bc kmalloc_trace+0x44/0x138 msi_alloc_desc+0x3c/0x9c msi_domain_insert_msi_desc+0x30/0x78 msi_setup_msi_desc+0x13c/0x184 __pci_enable_msi_range+0x258/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 freed by task 81 on cpu 7 at 10.811436s: msi_domain_free_descs+0xd4/0x10c msi_domain_free_locked.part.0+0xc0/0x1d8 msi_domain_alloc_irqs_all_locked+0xb4/0xbc pci_msi_setup_msi_irqs+0x30/0x4c __pci_enable_msi_range+0x2a8/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 Descriptor allocation done in: __pci_enable_msi_range msi_capability_init msi_setup_msi_desc msi_insert_msi_desc msi_domain_insert_msi_desc msi_alloc_desc ... Freed in case of failure in __msi_domain_alloc_locked() __pci_enable_msi_range msi_capability_init pci_msi_setup_msi_irqs msi_domain_alloc_irqs_all_locked msi_domain_alloc_locked __msi_domain_alloc_locked => fails msi_domain_free_locked ... That failure propagates back to pci_msi_setup_msi_irqs() in msi_capability_init() which accesses the descriptor for unmasking in the error exit path. Cure it by copying the descriptor and using the copy for the error exit path unmask operation. [ tglx: Massaged change log ]

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix potential UAF by revoke of fence registers CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.0703 ... In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix potential UAF by revoke of fence registers CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.070354] Unable to pin Y-tiled fence; err:-4 <3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active)) ... <4>[ 609.603992] ------------[ cut here ]------------ <2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301! <4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1 <4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 <4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915] <4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915] ... <4>[ 609.604271] Call Trace: <4>[ 609.604273] <TASK> ... <4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915] <4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915] <4>[ 609.604977] force_unbind+0x24/0xa0 [i915] <4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915] <4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915] <4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915] <4>[ 609.605440] process_scheduled_works+0x351/0x690 ... In the past, there were similar failures reported by CI from other IGT tests, observed on other platforms. Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for idleness of vma->active via fence_update(). That commit introduced vma->fence->active in order for the fence_update() to be able to wait selectively on that one instead of vma->active since only idleness of fence registers was needed. But then, another commit 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") replaced the call to fence_update() in i915_vma_revoke_fence() with only fence_write(), and also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front. No justification was provided on why we might then expect idleness of vma->fence->active without first waiting on it. The issue can be potentially caused by a race among revocation of fence registers on one side and sequential execution of signal callbacks invoked on completion of a request that was using them on the other, still processed in parallel to revocation of those fence registers. Fix it by waiting for idleness of vma->fence->active in i915_vma_revoke_fence(). (cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)

Show More

In the Linux kernel, the following vulnerability has been resolved: tun: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length ... In the Linux kernel, the following vulnerability has been resolved: tun: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tun_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted for IFF_TAP. This is to drop any frame shorter than the Ethernet header size just like how tun_get_user() does. CVE: CVE-2024-41091

Show More

In the Linux kernel, the following vulnerability has been resolved: tap: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or co ... In the Linux kernel, the following vulnerability has been resolved: tap: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode(). Add a check to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef ... In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description]

Show More

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix double free on error If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT ... In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix double free on error If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed.

Show More

In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable().

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), an ... In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), and then it is re-acquired after the function call. This change ensures that the locks are acquired in the correct order, preventing the possibility of a deadlock.

Show More

In the Linux kernel, the following vulnerability has been resolved: nvmet: always initialize cqe.result The spec doesn't mandate that the first two double words (aka results) for the command queue entry need to be set to 0 when they are not used (not specified). Though, the target implemention returns 0 for TCP and FC but not for RDMA. Let's make RDMA behave the same and thus explicitly initializing the result field. This prevents leaking any data from the stack.

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix quota root leak after quota disable failure If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps). Fix this by always doing a btrf ... In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix quota root leak after quota disable failure If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps). Fix this by always doing a btrfs_put_root() call under the 'out' label. This is a problem that exists since qgroups were first added in 2012 by commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but back then we missed a kfree on the quota root and free_extent_buffer() calls on its root and commit root nodes, since back then roots were not yet reference counted.

Show More

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix validation of block size Block size should be between 512 and PAGE_SIZE and be a power of 2. The current check does not validate this, so update the check. Without this patch, null_blk would Oops due to a null pointer deref when loaded with bs=1536 [1]. [axboe: remove unnecessary braces and != 0 check]

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix memory leak in nfs4_set_security_label We leak nfs_fattr and nfs4_label every time we set a security xattr.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: add consistency check for copen/cread This prevents malicious processes from completing random copen/cread requests and crashing the system. Added checks are listed below: * Generic, copen can only complete open requests, and cread can only complete read requests. * For copen, ondemand_id must not be 0, because this indicates that the request has not been read by the daemon. * For cread, the object c ... In the Linux kernel, the following vulnerability has been resolved: cachefiles: add consistency check for copen/cread This prevents malicious processes from completing random copen/cread requests and crashing the system. Added checks are listed below: * Generic, copen can only complete open requests, and cread can only complete read requests. * For copen, ondemand_id must not be 0, because this indicates that the request has not been read by the daemon. * For cread, the object corresponding to fd and req should be the same.

Show More

In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set object to close if ondemand_id < 0 in copen If copen is maliciously called in the user mode, it may delete the request corresponding to the random id. And the request may have not been read yet. Note that when the object is set to reopen, the open request will be done with the still reopen state in above case. As a result, the request corresponding to this object is always skipped in select_req function, so th ... In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set object to close if ondemand_id < 0 in copen If copen is maliciously called in the user mode, it may delete the request corresponding to the random id. And the request may have not been read yet. Note that when the object is set to reopen, the open request will be done with the still reopen state in above case. As a result, the request corresponding to this object is always skipped in select_req function, so the read request is never completed and blocks other process. Fix this issue by simply set object to close if its id < 0 in copen.

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: wext: add extra SIOCSIWSCAN data check In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise.

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees ... In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF.

Show More

In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Fix references to freed memory Most users after parsing a topology file, release memory used by it, so having pointer references directly into topology file contents is wrong. Use devm_kmemdup(), to allocate memory as needed.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_ ... In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

Show More

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Whitelist dtl slub object for copying to userspace Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_ ... In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Whitelist dtl slub object for copying to userspace Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object.

Show More

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: avoid possible crash when edev->pdev changes If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: cancel all works upon hci_unregister_dev() syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev ... In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: cancel all works upon hci_unregister_dev() syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); are called from hci_release_dev(). Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list.

Show More

In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill ... In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.

Show More