| CVE |
Vendors |
Products |
Updated |
CVSS v2 |
CVSS v3 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix uninitialized pointer free in add_inode_ref()
The add_inode_ref() function does not initialize the "name" struct when
it is declared. If any of the following calls to "read_one_inode()
returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}
then "name.name" would be freed on ...
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix uninitialized pointer free in add_inode_ref()
The add_inode_ref() function does not initialize the "name" struct when
it is declared. If any of the following calls to "read_one_inode()
returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}
then "name.name" would be freed on "out" before being initialized.
out:
...
kfree(name.name);
This issue was reported by Coverity with CID 1526744.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
The function read_alloc_one_name() does not initialize the name field of
the passed fscrypt_str struct if kmalloc fails to allocate the
corresponding buffer. Thus, it is not guaranteed that
fscrypt_str.name is initialized when freeing it.
This is a follow-up to the linked patch that fixes the remaining
instances of the bug introduced by commit e43eec81c516 ...
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
The function read_alloc_one_name() does not initialize the name field of
the passed fscrypt_str struct if kmalloc fails to allocate the
corresponding buffer. Thus, it is not guaranteed that
fscrypt_str.name is initialized when freeing it.
This is a follow-up to the linked patch that fixes the remaining
instances of the bug introduced by commit e43eec81c516 ("btrfs: use
struct qstr instead of name and namelen pairs").
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix user-after-free from session log off
There is racy issue between smb2 session log off and smb2 session setup.
It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece
count to session struct not to free session while it is being used.
|
In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
Syzkaller reported this splat:
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662
CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 ...
In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
Syzkaller reported this splat:
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662
CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline]
mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572
mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603
genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg net/socket.c:744 [inline]
____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607
___sys_sendmsg+0x135/0x1e0 net/socket.c:2661
__sys_sendmsg+0x117/0x1f0 net/socket.c:2690
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf7fe4579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 5387:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803
subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956
__tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline]
tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167
mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764
__mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592
mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642
mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline]
mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943
mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777
process_one_work+0x958/0x1b30 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/ke
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix mptcp DSS corruption due to large pmtu xmit
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Modules linked in:
CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not ...
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix mptcp DSS corruption due to large pmtu xmit
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Modules linked in:
CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff
RSP: 0018:ffffc90000006db8 EFLAGS: 00010246
RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00
RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0
RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8
R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000
R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5
FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
move_skbs_to_msk net/mptcp/protocol.c:811 [inline]
mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854
subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490
tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283
tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350
ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5662 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6107
__napi_poll+0xcb/0x490 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6962
handle_softirqs+0x2c5/0x980 kernel/softirq.c:554
do_softirq+0x11b/0x1e0 kernel/softirq.c:455
</IRQ>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451
dev_queue_xmit include/linux/netdevice.h:3094 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536
__tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline]
tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752
__tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015
tcp_push_pending_frames include/net/tcp.h:2107 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline]
tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
sk_backlog_rcv include/net/sock.h:1113 [inline]
__release_sock+0x214/0x350 net/core/sock.c:3072
release_sock+0x61/0x1f0 net/core/sock.c:3626
mptcp_push_
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swap ...
In the Linux kernel, the following vulnerability has been resolved:
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Call iso_exit() on module unload
If iso_init() has been called, iso_exit() must be called on module
unload. Without that, the struct proto that iso_init() registered with
proto_register() becomes invalid, which could cause unpredictable
problems later. In my case, with CONFIG_LIST_HARDENED and
CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually
triggers this BUG():
list_add corruption. next->p ...
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Call iso_exit() on module unload
If iso_init() has been called, iso_exit() must be called on module
unload. Without that, the struct proto that iso_init() registered with
proto_register() becomes invalid, which could cause unpredictable
problems later. In my case, with CONFIG_LIST_HARDENED and
CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually
triggers this BUG():
list_add corruption. next->prev should be prev (ffffffffb5355fd0),
but was 0000000000000068. (next=ffffffffc0a010d0).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x61/0xa0
...
__list_add_valid_or_report+0x61/0xa0
proto_register+0x299/0x320
hci_sock_init+0x16/0xc0 [bluetooth]
bt_init+0x68/0xd0 [bluetooth]
__pfx_bt_init+0x10/0x10 [bluetooth]
do_one_initcall+0x80/0x2f0
do_init_module+0x8b/0x230
__do_sys_init_module+0x15f/0x190
do_syscall_64+0x68/0x110
...
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix multiple init when debugfs is disabled
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPT ...
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix multiple init when debugfs is disabled
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the
duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...
This change removes the early return. The check for iso_debugfs being
NULL was unnecessary, it is always NULL when iso_inited is false.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
parport: Proper fix for array out-of-bounds access
The recent fix for array out-of-bounds accesses replaced sprintf()
calls blindly with snprintf(). However, since snprintf() returns the
would-be-printed size, not the actually output size, the length
calculation can still go over the given limit.
Use scnprintf() instead of snprintf(), which returns the actually
output letters, for addressing the potential out-of-bounds acces ...
In the Linux kernel, the following vulnerability has been resolved:
parport: Proper fix for array out-of-bounds access
The recent fix for array out-of-bounds accesses replaced sprintf()
calls blindly with snprintf(). However, since snprintf() returns the
would-be-printed size, not the actually output size, the length
calculation can still go over the given limit.
Use scnprintf() instead of snprintf(), which returns the actually
output letters, for addressing the potential out-of-bounds access
properly.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<TASK>
gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n ...
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<TASK>
gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
__pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm]
__pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389
update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500
__pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846
__rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
_raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107
__pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm]
ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195
ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79
__pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338
__pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
Allocated by task 65:
gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm]
gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm]
gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm]
gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm]
tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391
tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39
flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445
process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229
worker_thread+0x3dc/0x950 kernel/workqueue.c:3391
kthread+0x2a3/0x370 kernel/kthread.c:389
ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257
Freed by task 3367:
kfree+0x126/0x420 mm/slub.c:4580
gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
[Analysis]
gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux
can be freed by multi threads through ioctl,which leads
to the occurrence of uaf. Protect it by gsm tx lock.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Use code segment selector for VERW operand
Robert Gill reported below #GP in 32-bit mode when dosemu software was
executing vm86() system call:
general protection fault: 0000 [#1] PREEMPT SMP
CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1
Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010
EIP: restore_all_switch_stack+0xbe/0xcf
EAX: 00000000 EBX: 00000000 ECX: 0000000 ...
In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Use code segment selector for VERW operand
Robert Gill reported below #GP in 32-bit mode when dosemu software was
executing vm86() system call:
general protection fault: 0000 [#1] PREEMPT SMP
CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1
Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010
EIP: restore_all_switch_stack+0xbe/0xcf
EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc
DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046
CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0
Call Trace:
show_regs+0x70/0x78
die_addr+0x29/0x70
exc_general_protection+0x13c/0x348
exc_bounds+0x98/0x98
handle_exception+0x14d/0x14d
exc_bounds+0x98/0x98
restore_all_switch_stack+0xbe/0xcf
exc_bounds+0x98/0x98
restore_all_switch_stack+0xbe/0xcf
This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS
are enabled. This is because segment registers with an arbitrary user value
can result in #GP when executing VERW. Intel SDM vol. 2C documents the
following behavior for VERW instruction:
#GP(0) - If a memory operand effective address is outside the CS, DS, ES,
FS, or GS segment limit.
CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user
space. Use %cs selector to reference VERW operand. This ensures VERW will
not #GP for an arbitrary user %ds.
[ mingo: Fixed the SOB chain. ]
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: apple: check devm_kasprintf() returned value
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
|
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by fol ...
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Avoid null pointer deref during path establishment
For RTRS path establishment, RTRS client initiates and completes con_num
of connections. After establishing all its connections, the information
is exchanged between the client and server through the info_req message.
During this exchange, it is essential that all connections have been
established, and the state of the RTRS srv path is CONNECTED.
So add these s ...
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Avoid null pointer deref during path establishment
For RTRS path establishment, RTRS client initiates and completes con_num
of connections. After establishing all its connections, the information
is exchanged between the client and server through the info_req message.
During this exchange, it is essential that all connections have been
established, and the state of the RTRS srv path is CONNECTED.
So add these sanity checks, to make sure we detect and abort process in
error scenarios to avoid null pointer deref.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if we need to reschedule during overflow flush
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and ...
In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if we need to reschedule during overflow flush
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through k ...
In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:
CPU0 CPU1
| check_link_status_work
switchtec_ntb_remove |
kfree(sndev); |
| if (sndev->link_force_down)
| // use sndev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
serial: protect uart_port_dtr_rts() in uart_shutdown() too
Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so
the commit assumes, uport can be NULL in there. But right after that
protection, there is an unprotected "uart_port_dtr_rts(uport, false);"
call. That is invoked only if HUPCL is set, so I assume that is the
reason why we do no ...
In the Linux kernel, the following vulnerability has been resolved:
serial: protect uart_port_dtr_rts() in uart_shutdown() too
Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so
the commit assumes, uport can be NULL in there. But right after that
protection, there is an unprotected "uart_port_dtr_rts(uport, false);"
call. That is invoked only if HUPCL is set, so I assume that is the
reason why we do not see lots of these reports.
Or it cannot be NULL at this point at all for some reason :P.
Until the above is investigated, stay on the safe side and move this
dereference to the if too.
I got this inconsistency from Coverity under CID 1585130. Thanks.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointer before dereferencing se
[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.
This fixes 1 FORWARD_NULL issue reported by Coverity.
|
In the Linux kernel, the following vulnerability has been resolved:
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
syzbot has found a NULL pointer dereference bug in fbcon.
Here is the simplified C reproducer:
struct param {
uint8_t type;
struct tiocl_selection ts;
};
int main()
{
struct fb_con2fbmap con2fb;
struct param param;
int fd = open("/dev/fb1", 0, 0);
con2fb.console = 0x19;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
param.type = 2;
param. ...
In the Linux kernel, the following vulnerability has been resolved:
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
syzbot has found a NULL pointer dereference bug in fbcon.
Here is the simplified C reproducer:
struct param {
uint8_t type;
struct tiocl_selection ts;
};
int main()
{
struct fb_con2fbmap con2fb;
struct param param;
int fd = open("/dev/fb1", 0, 0);
con2fb.console = 0x19;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
param.type = 2;
param.ts.xs = 0; param.ts.ys = 0;
param.ts.xe = 0; param.ts.ye = 0;
param.ts.sel_mode = 0;
int fd1 = open("/dev/tty1", O_RDWR, 0);
ioctl(fd1, TIOCLINUX, ¶m);
con2fb.console = 1;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
return 0;
}
After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb)
causes the kernel to follow a different execution path:
set_con2fb_map
-> con2fb_init_display
-> fbcon_set_disp
-> redraw_screen
-> hide_cursor
-> clear_selection
-> highlight
-> invert_screen
-> do_update_region
-> fbcon_putcs
-> ops->putcs
Since ops->putcs is a NULL pointer, this leads to a kernel panic.
To prevent this, we need to call set_blitting_type() within set_con2fb_map()
to properly initialize ops->putcs.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:
[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error ...
In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:
[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
[232066.588586] Mem abort info:
[232066.588701] ESR = 0x0000000096000007
[232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits
[232066.589084] SET = 0, FnV = 0
[232066.589216] EA = 0, S1PTW = 0
[232066.589340] FSC = 0x07: level 3 translation fault
[232066.589559] Data abort info:
[232066.589683] ISV = 0, ISS = 0x00000007
[232066.589842] CM = 0, WnR = 0
[232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400
[232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000
[232066.590757] Internal error: Oops: 96000007 [#1] SMP
[232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2
[232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs
[232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1
[232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06
[232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4]
[232066.598595] sp : ffff8000f568fc70
[232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000
[232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001
[232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050
[232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000
[232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000
[232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6
[232066.600498] x11: 00000000000000
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
netfilter: br_netfilter: fix panic with metadata_dst skb
Fix a kernel panic in the br_netfilter module when sending untagged
traffic via a VxLAN device.
This happens during the check for fragmentation in br_nf_dev_queue_xmit.
It is dependent on:
1) the br_netfilter module being loaded;
2) net.bridge.bridge-nf-call-iptables set to 1;
3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port;
4) untagged frames ...
In the Linux kernel, the following vulnerability has been resolved:
netfilter: br_netfilter: fix panic with metadata_dst skb
Fix a kernel panic in the br_netfilter module when sending untagged
traffic via a VxLAN device.
This happens during the check for fragmentation in br_nf_dev_queue_xmit.
It is dependent on:
1) the br_netfilter module being loaded;
2) net.bridge.bridge-nf-call-iptables set to 1;
3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port;
4) untagged frames with size higher than the VxLAN MTU forwarded/flooded
When forwarding the untagged packet to the VxLAN bridge port, before
the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and
changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type
of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL.
Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check
for frames that needs to be fragmented: frames with higher MTU than the
VxLAN device end up calling br_nf_ip_fragment, which in turns call
ip_skb_dst_mtu.
The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst
with valid dst->dev, thus the crash.
This case was never supported in the first place, so drop the packet
instead.
PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data.
[ 176.291791] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000110
[ 176.292101] Mem abort info:
[ 176.292184] ESR = 0x0000000096000004
[ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits
[ 176.292530] SET = 0, FnV = 0
[ 176.292709] EA = 0, S1PTW = 0
[ 176.292862] FSC = 0x04: level 0 translation fault
[ 176.293013] Data abort info:
[ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000
[ 176.294166] [0000000000000110] pgd=0000000000000000,
p4d=0000000000000000
[ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth
br_netfilter bridge stp llc ipv6 crct10dif_ce
[ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted
6.8.0-rc3-g5b3fbd61b9d1 #2
[ 176.296314] Hardware name: linux,dummy-virt (DT)
[ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter]
[ 176.297636] sp : ffff800080003630
[ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27:
ffff6828c49ad9f8
[ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24:
00000000000003e8
[ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21:
ffff6828c3b16d28
[ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18:
0000000000000014
[ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15:
0000000095744632
[ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12:
ffffb7e137926a70
[ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 :
0000000000000000
[ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 :
f20e0100bebafeca
[ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 :
0000000000000000
[ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 :
ffff6828c7f918f0
[ 176.300889] Call trace:
[ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter]
[ 176.301703] nf_hook_slow+0x48/0x124
[ 176.302060] br_forward_finish+0xc8/0xe8 [bridge]
[ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter]
[ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter]
[ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter]
[ 176.303359] nf_hook_slow+0x48/0x124
[ 176.303
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
--------------------------------- ...
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr w ...
In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
igb: Do not bring the device up after non-fatal error
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought ...
In the Linux kernel, the following vulnerability has been resolved:
igb: Do not bring the device up after non-fatal error
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought down by igb_io_error_detected() if the interface
is up. This resulted in panic with stacktrace below.
[ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down
[ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0
[ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000
[ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000
[ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message
[ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported.
[ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message
[ T292] pcieport 0000:00:1c.5: AER: broadcast resume message
[ T292] ------------[ cut here ]------------
[ T292] kernel BUG at net/core/dev.c:6539!
[ T292] invalid opcode: 0000 [#1] PREEMPT SMP
[ T292] RIP: 0010:napi_enable+0x37/0x40
[ T292] Call Trace:
[ T292] <TASK>
[ T292] ? die+0x33/0x90
[ T292] ? do_trap+0xdc/0x110
[ T292] ? napi_enable+0x37/0x40
[ T292] ? do_error_trap+0x70/0xb0
[ T292] ? napi_enable+0x37/0x40
[ T292] ? napi_enable+0x37/0x40
[ T292] ? exc_invalid_op+0x4e/0x70
[ T292] ? napi_enable+0x37/0x40
[ T292] ? asm_exc_invalid_op+0x16/0x20
[ T292] ? napi_enable+0x37/0x40
[ T292] igb_up+0x41/0x150
[ T292] igb_io_resume+0x25/0x70
[ T292] report_resume+0x54/0x70
[ T292] ? report_frozen_detected+0x20/0x20
[ T292] pci_walk_bus+0x6c/0x90
[ T292] ? aer_print_port_info+0xa0/0xa0
[ T292] pcie_do_recovery+0x22f/0x380
[ T292] aer_process_err_devices+0x110/0x160
[ T292] aer_isr+0x1c1/0x1e0
[ T292] ? disable_irq_nosync+0x10/0x10
[ T292] irq_thread_fn+0x1a/0x60
[ T292] irq_thread+0xe3/0x1a0
[ T292] ? irq_set_affinity_notifier+0x120/0x120
[ T292] ? irq_affinity_notify+0x100/0x100
[ T292] kthread+0xe2/0x110
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork+0x2d/0x50
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork_asm+0x11/0x20
[ T292] </TASK>
To fix this issue igb_io_resume() checks if the interface is running and
the device is not down this means igb_io_error_detected() did not bring
the device down and there is no need to bring it up.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net/sched: accept TCA_STAB only for root qdisc
Most qdiscs maintain their backlog using qdisc_pkt_len(skb)
on the assumption it is invariant between the enqueue()
and dequeue() handlers.
Unfortunately syzbot can crash a host rather easily using
a TBF + SFQ combination, with an STAB on SFQ [1]
We can't support TCA_STAB on arbitrary level, this would
require to maintain per-qdisc storage.
[1]
[ 88.796496] BUG: kernel NULL p ...
In the Linux kernel, the following vulnerability has been resolved:
net/sched: accept TCA_STAB only for root qdisc
Most qdiscs maintain their backlog using qdisc_pkt_len(skb)
on the assumption it is invariant between the enqueue()
and dequeue() handlers.
Unfortunately syzbot can crash a host rather easily using
a TBF + SFQ combination, with an STAB on SFQ [1]
We can't support TCA_STAB on arbitrary level, this would
require to maintain per-qdisc storage.
[1]
[ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 88.798611] #PF: supervisor read access in kernel mode
[ 88.799014] #PF: error_code(0x0000) - not-present page
[ 88.799506] PGD 0 P4D 0
[ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI
[ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117
[ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00
All code
========
0: 0f b7 50 12 movzwl 0x12(%rax),%edx
4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax
b: 00
c: 48 89 d6 mov %rdx,%rsi
f: 48 29 d0 sub %rdx,%rax
12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx
19: 48 c1 e0 03 shl $0x3,%rax
1d: 48 01 c2 add %rax,%rdx
20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx)
25: 7e c0 jle 0xffffffffffffffe7
27: 48 8b 3a mov (%rdx),%rdi
2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction
2d: 4c 89 02 mov %r8,(%rdx)
30: 49 89 50 08 mov %rdx,0x8(%r8)
34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
3b: 00
3c: 48 rex.W
3d: c7 .byte 0xc7
3e: 07 (bad)
...
Code starting with the faulting instruction
===========================================
0: 4c 8b 07 mov (%rdi),%r8
3: 4c 89 02 mov %r8,(%rdx)
6: 49 89 50 08 mov %rdx,0x8(%r8)
a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
11: 00
12: 48 rex.W
13: c7 .byte 0xc7
14: 07 (bad)
...
[ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206
[ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800
[ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000
[ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f
[ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140
[ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac
[ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000
[ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0
[ 88.808165] Call Trace:
[ 88.808459] <TASK>
[ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715)
[ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539)
[ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
[ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq
[ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pab ...
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.
Check all UNSPEC matches and targets for similar issues:
- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.
Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.
The MARK target is also used by arptables, so register for NFPROTO_ARP too.
While at it, bail out if connbytes fails to enable the corresponding
conntrack family.
This change passes the selftests in iptables.git.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net: do not delay dst_entries_add() in dst_release()
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_ ...
In the Linux kernel, the following vulnerability has been resolved:
net: do not delay dst_entries_add() in dst_release()
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ppp: fix ppp_async_encode() illegal access
syzbot reported an issue in ppp_async_encode() [1]
In this case, pppoe_sendmsg() is called with a zero size.
Then ppp_async_encode() is called with an empty skb.
BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_encode drivers/net/ppp/ppp_async.c:5 ...
In the Linux kernel, the following vulnerability has been resolved:
ppp: fix ppp_async_encode() illegal access
syzbot reported an issue in ppp_async_encode() [1]
In this case, pppoe_sendmsg() is called with a zero size.
Then ppp_async_encode() is called with an empty skb.
BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline]
ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4092 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
slip: make slhc_remember() more robust against malicious packets
syzbot found that slhc_remember() was missing checks against
malicious packets [1].
slhc_remember() only checked the size of the packet was at least 20,
which is not good enough.
We need to make sure the packet includes the IPv4 and TCP header
that are supposed to be carried.
Add iph and th pointers to make the code more readable.
[1]
BUG: KMSAN: uninit-valu ...
In the Linux kernel, the following vulnerability has been resolved:
slip: make slhc_remember() more robust against malicious packets
syzbot found that slhc_remember() was missing checks against
malicious packets [1].
slhc_remember() only checked the size of the packet was at least 20,
which is not good enough.
We need to make sure the packet includes the IPv4 and TCP header
that are supposed to be carried.
Add iph and th pointers to make the code more readable.
[1]
BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455
ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline]
ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212
ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop the active perfmon before being destroyed
When running `kmscube` with one or more performance monitors enabled
via `GALLIUM_HUD`, the following kernel panic can occur:
[ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4
[ 55.008368] Mem abort info:
[ 55.008377] ESR = 0x0000000096000005
[ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits
[ 55.008402] SET = 0 ...
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop the active perfmon before being destroyed
When running `kmscube` with one or more performance monitors enabled
via `GALLIUM_HUD`, the following kernel panic can occur:
[ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4
[ 55.008368] Mem abort info:
[ 55.008377] ESR = 0x0000000096000005
[ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits
[ 55.008402] SET = 0, FnV = 0
[ 55.008412] EA = 0, S1PTW = 0
[ 55.008421] FSC = 0x05: level 1 translation fault
[ 55.008434] Data abort info:
[ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000
[ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper
gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb
drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight
[ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1
[ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608
[ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608
[ 55.008895] sp : ffffffc080673cf0
[ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28
[ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148
[ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38
[ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000
[ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90
[ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0
[ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04
[ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857
[ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470
[ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470
[ 55.013292] Call trace:
[ 55.013959] __mutex_lock.constprop.0+0x90/0x608
[ 55.014646] __mutex_lock_slowpath+0x1c/0x30
[ 55.015317] mutex_lock+0x50/0x68
[ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d]
[ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d]
[ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched]
[ 55.017921] kthread+0x11c/0x128
[ 55.018554] ret_from_fork+0x10/0x20
[ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401)
[ 55.019776] ---[ end trace 0000000000000000 ]---
[ 55.020411] note: v3d_bin[166] exited with preempt_count 1
This issue arises because, upon closing the file descriptor (which happens
when we interrupt `kmscube`), the active performance monitor is not
stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`,
the active performance monitor's pointer (`v3d->active_perfmon`) is still
retained.
If `kmscube` is run again, the driver will attempt to stop the active
performance monitor using the stale pointer in `v3d->active_perfmon`.
However, this pointer is no longer valid because the previous process has
already terminated, and all performance monitors associated with it have
been destroyed and freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
scsi: wd33c93: Don't use stale scsi_pointer value
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->sele ...
In the Linux kernel, the following vulnerability has been resolved:
scsi: wd33c93: Don't use stale scsi_pointer value
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net: Fix an unsafe loop on the list
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop o ...
In the Linux kernel, the following vulnerability has been resolved:
net: Fix an unsafe loop on the list
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
device-dax: correct pgoff align in dax_set_mapping()
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little ...
In the Linux kernel, the following vulnerability has been resolved:
device-dax: correct pgoff align in dax_set_mapping()
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
kthread: unpark only parked kthread
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a ...
In the Linux kernel, the following vulnerability has been resolved:
kthread: unpark only parked kthread
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ext4: dax: fix overflowing extents beyond inode size when partially writing
The dax_iomap_rw() does two things in each iteration: map written blocks
and copy user data to blocks. If the process is killed by user(See signal
handling in dax_iomap_iter()), the copied data will be returned and added
on inode size, which means that the length of written extents may exceed
the inode size, then fsck will fail. An example is given as: ...
In the Linux kernel, the following vulnerability has been resolved:
ext4: dax: fix overflowing extents beyond inode size when partially writing
The dax_iomap_rw() does two things in each iteration: map written blocks
and copy user data to blocks. If the process is killed by user(See signal
handling in dax_iomap_iter()), the copied data will be returned and added
on inode size, which means that the length of written extents may exceed
the inode size, then fsck will fail. An example is given as:
dd if=/dev/urandom of=file bs=4M count=1
dax_iomap_rw
iomap_iter // round 1
ext4_iomap_begin
ext4_iomap_alloc // allocate 0~2M extents(written flag)
dax_iomap_iter // copy 2M data
iomap_iter // round 2
iomap_iter_advance
iter->pos += iter->processed // iter->pos = 2M
ext4_iomap_begin
ext4_iomap_alloc // allocate 2~4M extents(written flag)
dax_iomap_iter
fatal_signal_pending
done = iter->pos - iocb->ki_pos // done = 2M
ext4_handle_inode_extension
ext4_update_inode_size // inode size = 2M
fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix?
Fix the problem by truncating extents if the written length is smaller
than expected.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
exfat: fix memory leak in exfat_load_bitmap()
If the first directory entry in the root directory is not a bitmap
directory entry, 'bh' will not be released and reassigned, which
will cause a memory leak.
|
|
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Avoid a bad reference count on CPU node
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
|
In the Linux kernel, the following vulnerability has been resolved:
exec: don't WARN for racy path_noexec check
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier")
0fd338b2d2cd ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug val ...
In the Linux kernel, the following vulnerability has been resolved:
exec: don't WARN for racy path_noexec check
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier")
0fd338b2d2cd ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug value.
However, the spurious path_noexec check is racy, resulting in
unwarranted warnings should someone race with setting the noexec flag.
One can note there is more to perm-checking whether execve is allowed
and none of the conditions are guaranteed to still hold after they were
tested for.
Additionally this does not validate whether the code path did any perm
checking to begin with -- it will pass if the inode happens to be
regular.
Keep the redundant path_noexec() check even though it's mindless
nonsense checking for guarantee that isn't given so drop the WARN.
Reword the commentary and do small tidy ups while here.
[brauner: keep redundant path_noexec() check]
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at driv ...
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
|
