| CVE |
Vendors |
Products |
Updated |
CVSS v2 |
CVSS v3 |
In the Linux kernel, the following vulnerability has been resolved:
macvlan: enforce a consistent minimal mtu
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
...
In the Linux kernel, the following vulnerability has been resolved:
macvlan: enforce a consistent minimal mtu
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
tcp: cdg: allow tcp_cdg_release() to be called multiple times
Apparently, mptcp is able to call tcp_disconnect() on an already
disconnected flow. This is generally fine, unless current congestion
control is CDG, because it might trigger a double-free [1]
Instead of fixing MPTCP, and future bugs, we can make tcp_disconnect()
more resilient.
[1]
BUG: KASAN: double-free in slab_free mm/slub.c:3539 [inline]
BUG: KASAN: double-fr ...
In the Linux kernel, the following vulnerability has been resolved:
tcp: cdg: allow tcp_cdg_release() to be called multiple times
Apparently, mptcp is able to call tcp_disconnect() on an already
disconnected flow. This is generally fine, unless current congestion
control is CDG, because it might trigger a double-free [1]
Instead of fixing MPTCP, and future bugs, we can make tcp_disconnect()
more resilient.
[1]
BUG: KASAN: double-free in slab_free mm/slub.c:3539 [inline]
BUG: KASAN: double-free in kfree+0xe2/0x580 mm/slub.c:4567
CPU: 0 PID: 3645 Comm: kworker/0:7 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: events mptcp_worker
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report_invalid_free+0x81/0x190 mm/kasan/report.c:462
____kasan_slab_free+0x18b/0x1c0 mm/kasan/common.c:356
kasan_slab_free include/linux/kasan.h:200 [inline]
slab_free_hook mm/slub.c:1759 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1785
slab_free mm/slub.c:3539 [inline]
kfree+0xe2/0x580 mm/slub.c:4567
tcp_disconnect+0x980/0x1e20 net/ipv4/tcp.c:3145
__mptcp_close_ssk+0x5ca/0x7e0 net/mptcp/protocol.c:2327
mptcp_do_fastclose net/mptcp/protocol.c:2592 [inline]
mptcp_worker+0x78c/0xff0 net/mptcp/protocol.c:2627
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Allocated by task 3671:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
____kasan_kmalloc mm/kasan/common.c:475 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525
kmalloc_array include/linux/slab.h:640 [inline]
kcalloc include/linux/slab.h:671 [inline]
tcp_cdg_init+0x10d/0x170 net/ipv4/tcp_cdg.c:380
tcp_init_congestion_control+0xab/0x550 net/ipv4/tcp_cong.c:193
tcp_reinit_congestion_control net/ipv4/tcp_cong.c:217 [inline]
tcp_set_congestion_control+0x96c/0xaa0 net/ipv4/tcp_cong.c:391
do_tcp_setsockopt+0x505/0x2320 net/ipv4/tcp.c:3513
tcp_setsockopt+0xd4/0x100 net/ipv4/tcp.c:3801
mptcp_setsockopt+0x35f/0x2570 net/mptcp/sockopt.c:844
__sys_setsockopt+0x2d6/0x690 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 16:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:367 [inline]
____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329
kasan_slab_free include/linux/kasan.h:200 [inline]
slab_free_hook mm/slub.c:1759 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1785
slab_free mm/slub.c:3539 [inline]
kfree+0xe2/0x580 mm/slub.c:4567
tcp_cleanup_congestion_control+0x70/0x120 net/ipv4/tcp_cong.c:226
tcp_v4_destroy_sock+0xdd/0x750 net/ipv4/tcp_ipv4.c:2254
tcp_v6_destroy_sock+0x11/0x20 net/ipv6/tcp_ipv6.c:1969
inet_csk_destroy_sock+0x196/0x440 net/ipv4/inet_connection_sock.c:1157
tcp_done+0x23b/0x340 net/ipv4/tcp.c:4649
tcp_rcv_state_process+0x40e7/0x4990 net/ipv4/tcp_input.c:6624
tcp_v6_do_rcv+0x3fc/0x13c0 net/ipv6/tcp_ipv6.c:1525
tcp_v6_rcv+0x2e8e/0x3830 net/ipv6/tcp_ipv6.c:1759
ip6_protocol_deliver_rcu+0x2db/0x1950 net/ipv6/ip6_input.c:439
ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:484
NF_HOOK include/linux/netfilter.h:302 [inline]
NF_HOOK include/linux/netfilter.h:296 [inline]
ip6_input+0x9c/0xd
---truncated---
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
Should not call eventfd_ctx_put() in case of error.
[Introduce new goto target instead. - Paolo]
|
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix optc2_configure warning on dcn314
[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 ...
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix optc2_configure warning on dcn314
[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 [amdgpu]
amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu]
[How]
Use optc1_configure_crc() directly
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: fix misbehavior if list_versions races with module loading
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm ...
In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: fix misbehavior if list_versions races with module loading
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: properly pin the parent in blkcg_css_online
blkcg_css_online is supposed to pin the blkcg of the parent, but
397c9f46ee4d refactored things and along the way, changed it to pin the
css instead. This results in extra pins, and we end up leaking blkcgs
and cgroups.
|
|
In the Linux kernel, the following vulnerability has been resolved:
x86/sgx: Add overflow check in sgx_validate_offset_length()
sgx_validate_offset_length() function verifies "offset" and "length"
arguments provided by userspace, but was missing an overflow check on
their addition. Add it.
|
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/uncore: Fix memory leak for events array
When a CPU comes online, the per-CPU NB and LLC uncore contexts are
freed but not the events array within the context structure. This
causes a memory leak as identified by the kmemleak detector.
[...]
unreferenced object 0xffff8c5944b8e320 (size 32):
comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 ...
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/uncore: Fix memory leak for events array
When a CPU comes online, the per-CPU NB and LLC uncore contexts are
freed but not the events array within the context structure. This
causes a memory leak as identified by the kmemleak detector.
[...]
unreferenced object 0xffff8c5944b8e320 (size 32):
comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000000759fb79>] amd_uncore_cpu_up_prepare+0xaf/0x230
[<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470
[<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170
[<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330
[<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110
[<0000000015365e0f>] amd_uncore_init+0x260/0x321
[<00000000089152d2>] do_one_initcall+0x3f/0x1f0
[<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212
[<0000000030be8dde>] kernel_init+0x11/0x120
[<0000000059709e59>] ret_from_fork+0x22/0x30
unreferenced object 0xffff8c5944b8dd40 (size 64):
comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000306efe8b>] amd_uncore_cpu_up_prepare+0x183/0x230
[<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470
[<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170
[<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330
[<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110
[<0000000015365e0f>] amd_uncore_init+0x260/0x321
[<00000000089152d2>] do_one_initcall+0x3f/0x1f0
[<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212
[<0000000030be8dde>] kernel_init+0x11/0x120
[<0000000059709e59>] ret_from_fork+0x22/0x30
[...]
Fix the problem by freeing the events array before freeing the uncore
context.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
Mike Galbraith reported the following against an old fork of preempt-rt
but the same issue also applies to the current preempt-rt tree.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: systemd
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
...
In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
Mike Galbraith reported the following against an old fork of preempt-rt
but the same issue also applies to the current preempt-rt tree.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: systemd
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
fpu_clone
CPU: 6 PID: 1 Comm: systemd Tainted: G E (unreleased)
Call Trace:
<TASK>
dump_stack_lvl
? fpu_clone
__might_resched
rt_spin_lock
fpu_clone
? copy_thread
? copy_process
? shmem_alloc_inode
? kmem_cache_alloc
? kernel_clone
? __do_sys_clone
? do_syscall_64
? __x64_sys_rt_sigprocmask
? syscall_exit_to_user_mode
? do_syscall_64
? syscall_exit_to_user_mode
? do_syscall_64
? syscall_exit_to_user_mode
? do_syscall_64
? exc_page_fault
? entry_SYSCALL_64_after_hwframe
</TASK>
Mike says:
The splat comes from fpu_inherit_perms() being called under fpregs_lock(),
and us reaching the spin_lock_irq() therein due to fpu_state_size_dynamic()
returning true despite static key __fpu_state_size_dynamic having never
been enabled.
Mike's assessment looks correct. fpregs_lock on a PREEMPT_RT kernel disables
preemption so calling spin_lock_irq() in fpu_inherit_perms() is unsafe. This
problem exists since commit
9e798e9aa14c ("x86/fpu: Prepare fpu_clone() for dynamically enabled features").
Even though the original bug report should not have enabled the paths at
all, the bug still exists.
fpregs_lock is necessary when editing the FPU registers or a task's FP
state but it is not necessary for fpu_inherit_perms(). The only write
of any FP state in fpu_inherit_perms() is for the new child which is
not running yet and cannot context switch or be borrowed by a kernel
thread yet. Hence, fpregs_lock is not protecting anything in the new
child until clone() completes and can be dropped earlier. The siglock
still needs to be acquired by fpu_inherit_perms() as the read of the
parent's permissions has to be serialised.
[ bp: Cleanup splat. ]
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
perf: Improve missing SIGTRAP checking
To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(),
which fires if pending_sigtrap was already set: returning to user space
without consuming pending_sigtrap, and then having the event fire again
would re-enter the kernel and trigger the WARN.
This, however, seemed to miss the case where some events not associated
with progress in the user space task can fire and the in ...
In the Linux kernel, the following vulnerability has been resolved:
perf: Improve missing SIGTRAP checking
To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(),
which fires if pending_sigtrap was already set: returning to user space
without consuming pending_sigtrap, and then having the event fire again
would re-enter the kernel and trigger the WARN.
This, however, seemed to miss the case where some events not associated
with progress in the user space task can fire and the interrupt handler
runs before the IRQ work meant to consume pending_sigtrap (and generate
the SIGTRAP).
syzbot gifted us this stack trace:
| WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow
| Modules linked in:
| CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
| RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313
| <...>
| Call Trace:
| <TASK>
| perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729
| __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
| __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749
| hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
| local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline]
| __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113
| sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107
| asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649
| <...>
| </TASK>
In this case, syzbot produced a program with event type
PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer
manages to fire again before the IRQ work got a chance to run, all while
never having returned to user space.
Improve the WARN to check for real progress in user space: approximate
this by storing a 32-bit hash of the current IP into pending_sigtrap,
and if an event fires while pending_sigtrap still matches the previous
IP, we assume no progress (false negatives are possible given we could
return to user space and trigger again on the same IP).
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in pro ...
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in process of enabling.
If that unintentionally enabled event has very low sampling period and
causes immediate successive NMI, causing the event to be throttled,
cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop().
This will result in amd_pmu_enable_event() getting called with event=NULL
when amd_pmu_enable_all() resumes after handling the NMIs. This causes a
kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000198
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
Call Trace:
<TASK>
amd_pmu_enable_all+0x68/0xb0
ctx_resched+0xd9/0x150
event_function+0xb8/0x130
? hrtimer_start_range_ns+0x141/0x4a0
? perf_duration_warn+0x30/0x30
remote_function+0x4d/0x60
__flush_smp_call_function_queue+0xc4/0x500
flush_smp_call_function_queue+0x11d/0x1b0
do_idle+0x18f/0x2d0
cpu_startup_entry+0x19/0x20
start_secondary+0x121/0x160
secondary_startup_64_no_verify+0xe5/0xeb
</TASK>
amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler
were recently added as part of BRS enablement but I'm not sure whether
we really need them. We can just disable BRS in the beginning and enable
it back while returning from NMI. This will solve the issue by not
enabling those events whose active_masks are set but are not yet enabled
in hw pmu.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated
by dev_set_name() need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
The 'tl_hba' will be freed in tcm_loop_release_adapt ...
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated
by dev_set_name() need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need
goto error label in this case.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're arme ...
In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in
__disarm_kprobe_ftrace() and may even cause use-after-free:
Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2)
WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0
Modules linked in: testKprobe_007(-)
CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18
[...]
Call Trace:
<TASK>
__disable_kprobe+0xcd/0xe0
__unregister_kprobe_top+0x12/0x150
? mutex_lock+0xe/0x30
unregister_kprobes.part.23+0x31/0xa0
unregister_kprobe+0x32/0x40
__x64_sys_delete_module+0x15e/0x260
? do_user_addr_fault+0x2cd/0x6b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
For the kprobe-on-ftrace case, we keep the post_handler setting to
identify this aggrprobe armed with kprobe_ipmodify_ops. This way we
can disarm it correctly.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix possible refcount leak in smb2_open()
Reference count of acls will leak when memory allocation fails. Fix this
by adding the missing posix_acl_release().
|
In the Linux kernel, the following vulnerability has been resolved:
igb: revert rtnl_lock() that causes deadlock
The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = ...
In the Linux kernel, the following vulnerability has been resolved:
igb: revert rtnl_lock() that causes deadlock
The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
The above race will never happen and the extra rtnl_lock causes deadlock
below
[ 141.420169] <TASK>
[ 141.420672] __schedule+0x2dd/0x840
[ 141.421427] schedule+0x50/0xc0
[ 141.422041] schedule_preempt_disabled+0x11/0x20
[ 141.422678] __mutex_lock.isra.13+0x431/0x6b0
[ 141.423324] unregister_netdev+0xe/0x20
[ 141.423578] igbvf_remove+0x45/0xe0 [igbvf]
[ 141.423791] pci_device_remove+0x36/0xb0
[ 141.423990] device_release_driver_internal+0xc1/0x160
[ 141.424270] pci_stop_bus_device+0x6d/0x90
[ 141.424507] pci_stop_and_remove_bus_device+0xe/0x20
[ 141.424789] pci_iov_remove_virtfn+0xba/0x120
[ 141.425452] sriov_disable+0x2f/0xf0
[ 141.425679] igb_disable_sriov+0x4e/0x100 [igb]
[ 141.426353] igb_remove+0xa0/0x130 [igb]
[ 141.426599] pci_device_remove+0x36/0xb0
[ 141.426796] device_release_driver_internal+0xc1/0x160
[ 141.427060] driver_detach+0x44/0x90
[ 141.427253] bus_remove_driver+0x55/0xe0
[ 141.427477] pci_unregister_driver+0x2a/0xa0
[ 141.428296] __x64_sys_delete_module+0x141/0x2b0
[ 141.429126] ? mntput_no_expire+0x4a/0x240
[ 141.429363] ? syscall_trace_enter.isra.19+0x126/0x1a0
[ 141.429653] do_syscall_64+0x5b/0x80
[ 141.429847] ? exit_to_user_mode_prepare+0x14d/0x1c0
[ 141.430109] ? syscall_exit_to_user_mode+0x12/0x30
[ 141.430849] ? do_syscall_64+0x67/0x80
[ 141.431083] ? syscall_exit_to_user_mode_prepare+0x183/0x1b0
[ 141.431770] ? syscall_exit_to_user_mode+0x12/0x30
[ 141.432482] ? do_syscall_64+0x67/0x80
[ 141.432714] ? exc_page_fault+0x64/0x140
[ 141.432911] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, Fix an Oops in error handling code
The error handling dereferences "vport". There is nothing we can do if
it is an error pointer except returning the error code.
|
|
In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc95xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
|
In the Linux kernel, the following vulnerability has been resolved:
iavf: fix hang on reboot with ice
When a system with E810 with existing VFs gets rebooted the following
hang may be observed.
Pid 1 is hung in iavf_remove(), part of a network driver:
PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow"
#0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
#1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
#2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ff ...
In the Linux kernel, the following vulnerability has been resolved:
iavf: fix hang on reboot with ice
When a system with E810 with existing VFs gets rebooted the following
hang may be observed.
Pid 1 is hung in iavf_remove(), part of a network driver:
PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow"
#0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
#1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
#2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
#3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
#11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
#12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7
RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead
RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90
R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005
R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000
ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b
During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.
Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
rethook: fix a potential memleak in rethook_alloc()
In rethook_alloc(), the variable rh is not freed or passed out
if handler is NULL, which could lead to a memleak, fix it.
[Masami: Add "rethook:" tag to the title.]
Acke-by: Masami Hiramatsu (Google) <[email protected]>
|
|
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
If iio_trigger_register() returns error, it should call iio_trigger_free()
to give up the reference that hold in iio_trigger_alloc(), so that it can
call iio_trig_release() to free memory when the refcount hit to 0.
|
In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
dev_set_name() allocates memory for name, it need be freed
when device_add() fails, call put_device() to give up the
reference that hold in device_initialize(), so that it can
be freed in kobject_cleanup() when the refcount hit to 0.
Fault injection test can trigger this:
unreferenced object 0xffff8e8340a7b4c0 (size 32):
comm "modprobe", pid 243, jiffie ...
In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
dev_set_name() allocates memory for name, it need be freed
when device_add() fails, call put_device() to give up the
reference that hold in device_initialize(), so that it can
be freed in kobject_cleanup() when the refcount hit to 0.
Fault injection test can trigger this:
unreferenced object 0xffff8e8340a7b4c0 (size 32):
comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s)
hex dump (first 32 bytes):
69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge
72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............
backtrace:
[<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360
[<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0
[<000000003636c520>] kstrdup+0x2d/0x60
[<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90
[<0000000092efe493>] dev_set_name+0x4e/0x70
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix a memory leak
We forgot to free new_model_number
|
In the Linux kernel, the following vulnerability has been resolved:
ntfs: check overflow when iterating ATTR_RECORDs
Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find().
Because the ATTR_RECORDs are next to each other, kernel can get the next
ATTR_RECORD from end address of current ATTR_RECORD, through current
ATTR_RECORD length field.
The problem is that during iteration, when kernel calculates the end
address of current ATTR_RECORD, kernel may trigger an integer overflow bu ...
In the Linux kernel, the following vulnerability has been resolved:
ntfs: check overflow when iterating ATTR_RECORDs
Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find().
Because the ATTR_RECORDs are next to each other, kernel can get the next
ATTR_RECORD from end address of current ATTR_RECORD, through current
ATTR_RECORD length field.
The problem is that during iteration, when kernel calculates the end
address of current ATTR_RECORD, kernel may trigger an integer overflow bug
in executing `a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))`. This
may wrap, leading to a forever iteration on 32bit systems.
This patch solves it by adding some checks on calculating end address
of current ATTR_RECORD during iteration.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix use-after-free in ntfs_attr_find()
Patch series "ntfs: fix bugs about Attribute", v2.
This patchset fixes three bugs relative to Attribute in record:
Patch 1 adds a sanity check to ensure that, attrs_offset field in first
mft record loading from disk is within bounds.
Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid
dereferencing ATTR_RECORD before checking this ATTR_RECORD is within
bounds.
Patc ...
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix use-after-free in ntfs_attr_find()
Patch series "ntfs: fix bugs about Attribute", v2.
This patchset fixes three bugs relative to Attribute in record:
Patch 1 adds a sanity check to ensure that, attrs_offset field in first
mft record loading from disk is within bounds.
Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid
dereferencing ATTR_RECORD before checking this ATTR_RECORD is within
bounds.
Patch 3 adds an overflow checking to avoid possible forever loop in
ntfs_attr_find().
Without patch 1 and patch 2, the kernel triggersa KASAN use-after-free
detection as reported by Syzkaller.
Although one of patch 1 or patch 2 can fix this, we still need both of
them. Because patch 1 fixes the root cause, and patch 2 not only fixes
the direct cause, but also fixes the potential out-of-bounds bug.
This patch (of 3):
Syzkaller reported use-after-free read as follows:
==================================================================
BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607
[...]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193
ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845
ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854
mount_bdev+0x34d/0x410 fs/super.c:1400
legacy_get_tree+0x105/0x220 fs/fs_context.c:610
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
The buggy address belongs to the physical page:
page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350
head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140
raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Kernel will loads $MFT/$DATA's first mft record in
ntfs_read_inode_mount().
Yet the problem is that after loading, kernel doesn't check whether
attrs_offset field is a valid value.
To be more specific, if attrs_offset field is larger than bytes_allocated
field, then it may trigger the out-of-bounds read bug(reported as
use-after-free bug) in ntfs_attr_find(), when kernel tries to access the
corresponding mft record's attribute.
This patch solves it by adding the sanity check between attrs_offset field
and bytes_allocated field, after loading the first mft record.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent bpf program recursion for raw tracepoint probes
We got report from sysbot [1] about warnings that were caused by
bpf program attached to contention_begin raw tracepoint triggering
the same tracepoint by using bpf_trace_printk helper that takes
trace_printk_lock lock.
Call Trace:
<TASK>
? trace_event_raw_event_bpf_trace_printk+0x5f/0x90
bpf_trace_printk+0x2b/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
...
In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent bpf program recursion for raw tracepoint probes
We got report from sysbot [1] about warnings that were caused by
bpf program attached to contention_begin raw tracepoint triggering
the same tracepoint by using bpf_trace_printk helper that takes
trace_printk_lock lock.
Call Trace:
<TASK>
? trace_event_raw_event_bpf_trace_printk+0x5f/0x90
bpf_trace_printk+0x2b/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
__unfreeze_partials+0x5b/0x160
...
The can be reproduced by attaching bpf program as raw tracepoint on
contention_begin tracepoint. The bpf prog calls bpf_trace_printk
helper. Then by running perf bench the spin lock code is forced to
take slow path and call contention_begin tracepoint.
Fixing this by skipping execution of the bpf program if it's
already running, Using bpf prog 'active' field, which is being
currently used by trampoline programs for the same reason.
Moving bpf_prog_inc_misses_counter to syscall.c because
trampoline.c is compiled in just for CONFIG_BPF_JIT option.
[1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net/9p: use a dedicated spinlock for trans_fd
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in ...
In the Linux kernel, the following vulnerability has been resolved:
net/9p: use a dedicated spinlock for trans_fd
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine)
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
netlink: Bounds-check struct nlmsgerr creation
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:
memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)
|
In the Linux kernel, the following vulnerability has been resolved:
9p/trans_fd: always use O_NONBLOCK read/write
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_rea ...
In the Linux kernel, the following vulnerability has been resolved:
9p/trans_fd: always use O_NONBLOCK read/write
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open()
does not set O_NONBLOCK flag, but pipe blocks unless signal is pending,
p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when
the file descriptor refers to a pipe. In other words, pipe file descriptor
needs to be handled as if socket file descriptor.
We somehow need to interrupt kernel_read()/kernel_write() on pipes.
A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace-
supplied file descriptors (which might break userspace programs), and
O_NONBLOCK flag could be changed by userspace. It would be possible to set
O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still
remains small race window for clearing O_NONBLOCK flag.
If we don't want to manipulate O_NONBLOCK flag, we might be able to
surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING)
and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are
processed by kernel threads which process global system_wq workqueue,
signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be
needed if we count on signals for making kernel_read()/kernel_write()
non-blocking.
[Dominique: add comment at Christian's suggestion]
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
9p: trans_fd/p9_conn_cancel: drop client lock earlier
syzbot reported a double-lock here and we no longer need this
lock after requests have been moved off to local list:
just drop the lock earlier.
|
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Check sb_bsize_shift after reading superblock
Fuzzers like to scribble over sb_bsize_shift but in reality it's very
unlikely that this field would be corrupted on its own. Nevertheless it
should be checked to avoid the possibility of messy mount errors due to
bad calculations. It's always a fixed value based on the block size so
we can just check that it's the expected value.
Tested with:
mkfs.gfs2 -O -p lock_noloc ...
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Check sb_bsize_shift after reading superblock
Fuzzers like to scribble over sb_bsize_shift but in reality it's very
unlikely that this field would be corrupted on its own. Nevertheless it
should be checked to avoid the possibility of messy mount errors due to
bad calculations. It's always a fixed value based on the block size so
we can just check that it's the expected value.
Tested with:
mkfs.gfs2 -O -p lock_nolock /dev/vdb
for i in 0 -1 64 65 32 33; do
gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb
mount /dev/vdb /mnt/test && umount /mnt/test
done
Before this patch we get a withdraw after
[ 76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block
[ 76.413681] bh = 19 (type: exp=5, found=4)
[ 76.413681] function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492
and with UBSAN configured we also get complaints like
[ 76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19
[ 76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int'
After the patch, these complaints don't appear, mount fails immediately
and we get an explanation in dmesg.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
ceph: avoid putting the realm twice when decoding snaps fails
When decoding the snaps fails it maybe leaving the 'first_realm'
and 'realm' pointing to the same snaprealm memory. And then it'll
put it twice and could cause random use-after-free, BUG_ON, etc
issues.
|
In the Linux kernel, the following vulnerability has been resolved:
ublk: fix handling recovery & reissue in ublk_abort_queue()
Commit 8284066946e6 ("ublk: grab request reference when the request is handled
by userspace") doesn't grab request reference in case of recovery reissue.
Then the request can be requeued & re-dispatch & failed when canceling
uring command.
If it is one zc request, the request can be freed before io_uring
returns the zc buffer back, then cause kernel panic:
[ 126.77 ...
In the Linux kernel, the following vulnerability has been resolved:
ublk: fix handling recovery & reissue in ublk_abort_queue()
Commit 8284066946e6 ("ublk: grab request reference when the request is handled
by userspace") doesn't grab request reference in case of recovery reissue.
Then the request can be requeued & re-dispatch & failed when canceling
uring command.
If it is one zc request, the request can be freed before io_uring
returns the zc buffer back, then cause kernel panic:
[ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[ 126.773657] #PF: supervisor read access in kernel mode
[ 126.774052] #PF: error_code(0x0000) - not-present page
[ 126.774455] PGD 0 P4D 0
[ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI
[ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full)
[ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014
[ 126.776275] Workqueue: iou_exit io_ring_exit_work
[ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv]
Fixes it by always grabbing request reference for aborting the request.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
Currently, if a VMA merge fails due to an OOM condition arising on commit
merge or a failure to duplicate anon_vma's, we report this so the caller
can handle it.
However there are cases where the caller is only ostensibly trying a
merge, and doesn't mind if it fails due to this condition.
Since we do not want to introduce an implicit assumption that we on ...
In the Linux kernel, the following vulnerability has been resolved:
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
Currently, if a VMA merge fails due to an OOM condition arising on commit
merge or a failure to duplicate anon_vma's, we report this so the caller
can handle it.
However there are cases where the caller is only ostensibly trying a
merge, and doesn't mind if it fails due to this condition.
Since we do not want to introduce an implicit assumption that we only
actually modify VMAs after OOM conditions might arise, add a 'give up on
oom' option and make an explicit contract that, should this flag be set, we
absolutely will not modify any VMAs should OOM arise and just bail out.
Since it'd be very unusual for a user to try to vma_modify() with this flag
set but be specifying a range within a VMA which ends up being split (which
can fail due to rlimit issues, not only OOM), we add a debug warning for
this condition.
The motivating reason for this is uffd release - syzkaller (and Pedro
Falcato's VERY astute analysis) found a way in which an injected fault on
allocation, triggering an OOM condition on commit merge, would result in
uffd code becoming confused and treating an error value as if it were a VMA
pointer.
To avoid this, we make use of this new VMG flag to ensure that this never
occurs, utilising the fact that, should we be clearing entire VMAs, we do
not wish an OOM event to be reported to us.
Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for
his insightful and intelligent analysis of the situation, both of whom were
instrumental in this fix.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than
rounddown_pow_of_two(ULONG_MAX),
The function macro roundup_pow_of_two(length) will hit an out-of-bounds
shift [1].
Use a full TLB invalidation for such cases.
v2:
- Use a define for the range size limit over which we use a full
TLB invalidation. (Lucas)
- Use a better calculation of the limit.
[1]:
[ 39.202421] ...
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than
rounddown_pow_of_two(ULONG_MAX),
The function macro roundup_pow_of_two(length) will hit an out-of-bounds
shift [1].
Use a full TLB invalidation for such cases.
v2:
- Use a define for the range size limit over which we use a full
TLB invalidation. (Lucas)
- Use a better calculation of the limit.
[1]:
[ 39.202421] ------------[ cut here ]------------
[ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10
[ 39.202690] Tainted: [U]=USER
[ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 39.202691] Call Trace:
[ 39.202692] <TASK>
[ 39.202695] dump_stack_lvl+0x6e/0xa0
[ 39.202699] ubsan_epilogue+0x5/0x30
[ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6
[ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe]
[ 39.202800] ? find_held_lock+0x2b/0x80
[ 39.202803] ? mark_held_locks+0x40/0x70
[ 39.202806] xe_svm_invalidate+0x459/0x700 [xe]
[ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm]
[ 39.202900] __mmu_notifier_release+0x1f5/0x270
[ 39.202905] exit_mmap+0x40e/0x450
[ 39.202912] __mmput+0x45/0x110
[ 39.202914] exit_mm+0xc5/0x130
[ 39.202916] do_exit+0x21c/0x500
[ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190
[ 39.202920] do_group_exit+0x36/0xa0
[ 39.202922] get_signal+0x8f8/0x900
[ 39.202926] arch_do_signal_or_restart+0x35/0x100
[ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290
[ 39.202932] do_syscall_64+0xa1/0x180
[ 39.202934] ? do_user_addr_fault+0x59f/0x8a0
[ 39.202937] ? lock_release+0xd2/0x2a0
[ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0
[ 39.202942] ? trace_hardirqs_off+0x4b/0xc0
[ 39.202944] ? clear_bhb_loop+0x25/0x80
[ 39.202946] ? clear_bhb_loop+0x25/0x80
[ 39.202947] ? clear_bhb_loop+0x25/0x80
[ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 39.202952] RIP: 0033:0x7fa945e543e1
[ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7.
[ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293
[ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3
[ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff
[ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0
[ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
[ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000
[ 39.202970] </TASK>
[ 39.202970] ---[ end trace ]---
(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad)
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb()
Correct error handling in prepare_fb() to fix leaking resources when
error happens.
|
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: take paired job reference
For paired jobs, have the fragment job take a reference on the
geometry job, so that the geometry job cannot be freed until
the fragment job has finished with it.
The geometry job structure is accessed when the fragment job is being
prepared by the GPU scheduler. Taking the reference prevents the
geometry job being freed until the fragment job no longer requires it.
Fixes a use afte ...
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: take paired job reference
For paired jobs, have the fragment job take a reference on the
geometry job, so that the geometry job cannot be freed until
the fragment job has finished with it.
The geometry job structure is accessed when the fragment job is being
prepared by the GPU scheduler. Taking the reference prevents the
geometry job being freed until the fragment job no longer requires it.
Fixes a use after free bug detected by KASAN:
[ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr]
[ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: fix firmware memory leaks
Free the memory used to hold the results of firmware image processing
when the module is unloaded.
Fix the related issue of the same memory being leaked if processing
of the firmware image fails during module load.
Ensure all firmware GEM objects are destroyed if firmware image
processing fails.
Fixes memory leaks on powervr module unload detected by Kmemleak:
unreferenced object ...
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: fix firmware memory leaks
Free the memory used to hold the results of firmware image processing
when the module is unloaded.
Fix the related issue of the same memory being leaked if processing
of the firmware image fails during module load.
Ensure all firmware GEM objects are destroyed if firmware image
processing fails.
Fixes memory leaks on powervr module unload detected by Kmemleak:
unreferenced object 0xffff000042e20000 (size 94208):
comm "modprobe", pid 470, jiffies 4295277154
hex dump (first 32 bytes):
02 ae 7f ed bf 45 84 00 3c 5b 1f ed 9f 45 45 05 .....E..<[...EE.
d5 4f 5d 14 6c 00 3d 23 30 d0 3a 4a 66 0e 48 c8 .O].l.=#0.:Jf.H.
backtrace (crc dd329dec):
kmemleak_alloc+0x30/0x40
___kmalloc_large_node+0x140/0x188
__kmalloc_large_node_noprof+0x2c/0x13c
__kmalloc_noprof+0x48/0x4c0
pvr_fw_init+0xaa4/0x1f50 [powervr]
unreferenced object 0xffff000042d20000 (size 20480):
comm "modprobe", pid 470, jiffies 4295277154
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 09 00 00 00 0b 00 00 00 ................
00 00 00 00 00 00 00 00 07 00 00 00 08 00 00 00 ................
backtrace (crc 395b02e3):
kmemleak_alloc+0x30/0x40
___kmalloc_large_node+0x140/0x188
__kmalloc_large_node_noprof+0x2c/0x13c
__kmalloc_noprof+0x48/0x4c0
pvr_fw_init+0xb0c/0x1f50 [powervr]
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by sl ...
In the Linux kernel, the following vulnerability has been resolved:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
00510 Mem abort info:
00510 ESR = 0x0000000096000045
00510 EC = 0x25: DABT (current EL), IL = 32 bits
00510 SET = 0, FnV = 0
00510 EA = 0, S1PTW = 0
00510 FSC = 0x05: level 1 translation fault
00510 Data abort info:
00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0
00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000
00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00510 Internal error: Oops: 0000000096000045 [#1] SMP
00510 Modules linked in:
00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE
00510 Hardware name: linux,dummy-virt (DT)
00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190
00510 lr : __kmalloc_noprof+0x150/0x310
00510 sp : ffffff80c87df6c0
00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200
00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001
00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180
00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000
00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700
00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006
00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58
00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556
00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060
00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000
00510 Call trace:
00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P)
00510 __kmalloc_noprof+0x150/0x310
00510 __bch2_folio_create+0x5c/0xf8
00510 bch2_folio_create+0x2c/0x40
00510 bch2_readahead+0xc0/0x460
00510 read_pages+0x7c/0x230
00510 page_cache_ra_order+0x244/0x3a8
00510 page_cache_async_ra+0x124/0x170
00510 filemap_readahead.isra.0+0x58/0xa0
00510 filemap_get_pages+0x454/0x7b0
00510 filemap_read+0xdc/0x418
00510 bch2_read_iter+0x100/0x1b0
00510 vfs_read+0x214/0x300
00510 ksys_read+0x6c/0x108
00510 __arm64_sys_read+0x20/0x30
00510 invoke_syscall.constprop.0+0x54/0xe8
00510 do_el0_svc+0x44/0xc8
00510 el0_svc+0x18/0x58
00510 el0t_64_sync_handler+0x104/0x130
00510 el0t_64_sync+0x154/0x158
00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881)
00510 ---[ end trace 0000000000000000 ]---
00510 Kernel panic - not syncing: Oops: Fatal exception
00510 SMP: stopping secondary CPUs
00510 Kernel Offset: disabled
00510 CPU features: 0x0000,000000e0,00000410,8240500b
00510 Memory Limit: none
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net_sched: skbprio: Remove overly strict queue assertions
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy betw ...
In the Linux kernel, the following vulnerability has been resolved:
net_sched: skbprio: Remove overly strict queue assertions
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid()
The pynfs DELEG8 test fails when run against nfsd. It acquires a
delegation and then lets the lease time out. It then tries to use the
deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets
bad NFS4ERR_BAD_STATEID instead.
When a delegation is revoked, it's initially marked with
SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's ma ...
In the Linux kernel, the following vulnerability has been resolved:
nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid()
The pynfs DELEG8 test fails when run against nfsd. It acquires a
delegation and then lets the lease time out. It then tries to use the
deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets
bad NFS4ERR_BAD_STATEID instead.
When a delegation is revoked, it's initially marked with
SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's marked
with the SC_STATUS_FREEABLE flag, which denotes that it is waiting for
s FREE_STATEID call.
nfs4_lookup_stateid() accepts a statusmask that includes the status
flags that a found stateid is allowed to have. Currently, that mask
never includes SC_STATUS_FREEABLE, which means that revoked delegations
are (almost) never found.
Add SC_STATUS_FREEABLE to the always-allowed status flags, and remove it
from nfsd4_delegreturn() since it's now always implied.
Show More
|