Vulnerabilities (CVE)

Unspecified vulnerability in Juniper Junos before 11.4R10-S1, before 11.4R11, 12.1X44 before 12.1X44-D26, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, and 12.1X46 before 12.1X46-D10, when Dynamic IPsec VPN is configured, allows remote attackers to cause a denial of service (new Dynamic VPN connection failures and CPU and disk consumption) via unknown vectors.

Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D15, and 12.3X48 before 12.3X48-D10 on SRX series devices does not properly enforce the log-out-on-disconnect feature when configured in the [system port console] stanza, which allows physically proximate attackers to reconnect to the console port and gain administrative access by leveraging access to the device.

Juniper Junos 11.4 before R12-S4, 12.1X44 before D35, 12.1X45 before D30, 12.1X46 before D25, 12.1X47 before D10, 12.2 before R9, 12.2X50 before D70, 12.3 before R7, 13.1 before R4 before S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R5, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R3, and 14.1 before R1 allows remote attackers to cause a denial of service (router protocol daemon crash) via a crafted RSVP PATH message.

The stateless firewall in Juniper Junos 13.3R3, 14.1R1, and 14.1R2, when using Trio-based PFE modules, does not properly match ports, which might allow remote attackers to bypass firewall rule.

Juniper Junos 11.4 before R12, 12.1 before R10, 12.1X44 before D35, 12.1X45 before D25, 12.1X46 before D20, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4-S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R2, and 14.1 before R1, when a RADIUS accounting server is configured as [system accounting destination radius], creates an entry in /var/etc/pam_radius.conf, which ... Juniper Junos 11.4 before R12, 12.1 before R10, 12.1X44 before D35, 12.1X45 before D25, 12.1X46 before D20, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4-S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R2, and 14.1 before R1, when a RADIUS accounting server is configured as [system accounting destination radius], creates an entry in /var/etc/pam_radius.conf, which might allow remote attackers to bypass authentication via unspecified vectors.

Show More

Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D105, 14.1X51 before 14.1X51-D70, 14.1X53 before 14.1X53-D25, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R1, 15.1 before 15.1F2 or 15.1R1, and 15.1X49 before 15.1X49-D10 does not require a password for the root user when pam.conf is "corrupted," w ... Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D105, 14.1X51 before 14.1X51-D70, 14.1X53 before 14.1X53-D25, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R1, 15.1 before 15.1F2 or 15.1R1, and 15.1X49 before 15.1X49-D10 does not require a password for the root user when pam.conf is "corrupted," which allows local users to gain root privileges by modifying the file.

Show More

Juniper Junos OS before 12.1X46-D50 on SRX Series devices reverts to "safe mode" authentication and allows root CLI logins without a password after a failed upgrade to 12.1X46, which might allow local users to gain privileges by leveraging use of the "request system software" command with the "partition" option.

Embedthis Appweb, as used in J-Web in Juniper Junos OS before 12.1X44-D60, 12.1X46 before 12.1X46-D45, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D20, 13.2X51 before 13.2X51-D20, 13.3 before 13.3R8, 14.1 before 14.1R6, and 14.2 before 14.2R5, allows remote attackers to cause a denial of service (J-Web crash) via unspecified vectors.

named in ISC BIND 9.x before 9.9.8-P4 and 9.10.x before 9.10.3-P4 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted signature record for a DNAME record, related to db.c and resolver.c.

Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D15, 12.3 before 12.3R9, 13.1 before 13.1R4-S3, 13.2 before 13.2R6, 13.3 before 13.3R5, 14.1 before 14.1R3, and 14.2 before 14.2R1 does not properly handle double quotes in authorization attributes in the TACACS+ configuration, which allows local users to bypass the security policy and execute commands via unspecified vectors.

Juniper Junos 11.4 before 11.4R8, 12.1 before 12.1R5, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D15, 12.1X46 before 12.1X46-D10, and 12.1X47 before 12.1X47-D10 on SRX Series devices, allows remote attackers to cause a denial of service (flowd crash) via a malformed packet, related to translating IPv6 to IPv4.

Juniper chassis with Trio (Trinity) chipset line cards and Junos OS 13.3 before 13.3R8, 14.1 before 14.1R6, 14.2 before 14.2R5, and 15.1 before 15.1R2 allow remote attackers to cause a denial of service (MPC line card crash) via a crafted uBFD packet.

Juniper Junos 11.4 before R11, 12.1 before R9, 12.1X44 before D30, 12.1X45 before D20, 12.1X46 before D15, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D15, 13.2X52 before D15, 13.3 before R1, when using an em interface to connect to a certain internal network, allows remote attackers to cause a denial of service (em driver bock and FPC reset or "go offline") via ... Juniper Junos 11.4 before R11, 12.1 before R9, 12.1X44 before D30, 12.1X45 before D20, 12.1X46 before D15, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D15, 13.2X52 before D15, 13.3 before R1, when using an em interface to connect to a certain internal network, allows remote attackers to cause a denial of service (em driver bock and FPC reset or "go offline") via a series of crafted (1) CLNP fragmented packets, when clns-routing or ESIS is configured, or (2) IPv4 or (3) IPv6 fragmented packets.

Show More

The Juniper SRX Series services gateways with Junos OS 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, and 12.3X48 before 12.3X48-D15 do not properly implement the "set system ports console insecure" feature, which allows physically proximate attackers to gain administrative privileges by leveraging access to the console port.

Juniper Junos before 11.4R11, 12.1 before 12.1R9, 12.2 before 12.2R7, 12.3R4 before 12.3R4-S3, 13.1 before 13.1R4, 13.2 before 13.2R2, and 13.3 before 13.3R1, as used in MX Series and T4000 routers, allows remote attackers to cause a denial of service (PFE restart) via a crafted IP packet to certain (1) Trio or (2) Cassis-based Packet Forwarding Engine (PFE) modules.

The Juniper EX4600, QFX3500, QFX3600, and QFX5100 switches with Junos 13.2X51-D15 through 13.2X51-D25, 13.2X51 before 13.2X51-D30, and 14.1X53 before 14.1X53-D10 allows remote attackers to cause a denial of service (CPU consumption) via unspecified vectors.

Juniper Junos 13.2 before 13.2R3 and 13.3 before 13.3R1, when PIM is enabled, allows remote attackers to cause a denial of service (kernel panic and crash) via a large number of crafted IGMP packets.

Juniper Junos OS before 12.1X46-D45, 12.1X47 before 12.1X47-D30, 12.1X48 before 12.3X48-D20, and 15.1X49 before 15.1X49-D30 on SRX series devices, when the Real Time Streaming Protocol Application Layer Gateway (RTSP ALG) is enabled, allow remote attackers to cause a denial of service (flowd crash) via a crafted RTSP packet.

Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R11, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D30, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8-S2, 12.3 before 12.3R7, 13.1 before 13.1R4-S2, 13.2 before 13.2R5, 13.3 before 13.3R2-S2, and 14.1 before 14.1R1 allows remote authenticated users to gain privileges via unspecified combinations of CLI commands and arguments.

The SSH server in Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X53 before 14.1X53-D25, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D20 allows remote attackers to cause a denial of service (CPU consumption) via unspecified SSH traffic.

Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.2X52 before 13.2X52-D25, 13.3 before 13.3R6, 14.1R3 before 14.1R3-S2, 14.1 before 14.1R4, 14.1X53 before 14.1X53-D12, 14.1X53 before 14.1X53-D16, 14.1X55 before 14.1X55-D25, 14.2 before 14.2R2, and 15.1 before 15.1R1 allows remote attackers to cause a denial of service (mbuf and connection consumpti ... Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.2X52 before 13.2X52-D25, 13.3 before 13.3R6, 14.1R3 before 14.1R3-S2, 14.1 before 14.1R4, 14.1X53 before 14.1X53-D12, 14.1X53 before 14.1X53-D16, 14.1X55 before 14.1X55-D25, 14.2 before 14.2R2, and 15.1 before 15.1R1 allows remote attackers to cause a denial of service (mbuf and connection consumption and restart) via a large number of requests that trigger a TCP connection to move to the LAST_ACK state when there is more data to send.

Show More

Juniper Junos OS 14.1X53 before 14.1X53-D30 on QFX Series switches allows remote attackers to cause a denial of service (PFE panic) via a high rate of unspecified VXLAN packets.

Juniper Junos OS before 12.1X46-D50, 12.1X47 before 12.1X47-D40, 12.3X48 before 12.3X48-D30, 13.3 before 13.3R9, 14.1 before 14.1R8, 14.1X53 before 14.1X53-D40, 14.2 before 14.2R6, 15.1 before 15.1F6 or 15.1R3, and 15.1X49 before 15.1X49-D40, when configured with a GRE or IPIP tunnel, allow remote attackers to cause a denial of service (kernel panic) via a crafted ICMP packet.

Juniper Junos 11.4 before 11.4R8, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R9, 12.3R2 before 12.3R2-S3, 12.3 before 12.3R3, 13.1 before 13.1R4, and 13.2 before 13.2R1 allows remote attackers to cause a denial of service (assertion failure and rpd restart) via a crafted BGP FlowSpec prefix.

Juniper Junos OS before 12.1X44-D55, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D40, 13.3 before 13.3R7, 14.1 before 14.1R5, 14.1X53 before 14.1X53-D18 or 14.1X53-D30, 14.1X55 before 14.1X55-D25, 14.2 before 14.2R4, 15.1 before 15.1R2, and 15.1X49 before 15.1X49-D10 allow remote attackers to cause a denial of service via a malformed IGMPv3 packet, aka a "multicast denial of service."

Cross-site scripting (XSS) vulnerability in J-Web in Juniper Junos before 11.4R11, 11.4X27 before 11.4X27.62 (BBE), 12.1 before 12.1R9, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.2 before 12.2R7, 12.3 before 12.3R6, 13.1 before 13.1R4, 13.2 before 13.2R3, and 13.3 before 13.3R1 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Juniper Junos OS before 12.1X44-D60, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R9, 13.2X51 before 13.2X51-D39, 13.3 before 13.3R8, 14.1 before 14.1R6, 14.1X53 before 14.1X53-D30, 14.2 before 14.2R4-S1, 15.1 before 15.1R2, 15.1X49 before 15.1X49-D30, and 16.1 before 16.1R1 allow remote attackers to cause a denial of service (socket consumption) via crafted TCP timestamps.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage. This issue affects Junos OS: 21.2 releases from 21.2R3-S5 before 21.2R3-S6. This issue does ... An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage. This issue affects Junos OS: 21.2 releases from 21.2R3-S5 before 21.2R3-S6. This issue does not affect earlier or later releases.

Show More

A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition.  The process crashes and restarts automatically. When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the proces ... A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition.  The process crashes and restarts automatically. When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash.  This process manages and controls the configuration of broadband subscriber sessions and services.  While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition. This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled. This issue affects Junos OS: * All versions before 20.4R3-S5, * from 21.1 before 21.1R3-S4, * from 21.2 before 21.2R3-S3, * from 21.3 before 21.3R3-S5, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3, * from 22.2 before 22.2R3, * from 22.3 before 22.3R2;

Show More

A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS). In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart. This issue affects Junos OS on MX Series: * All version before 21.2R3-S6, * 21.4 versions before 21.4R3-S6, * 22.1 versions before 22.1R3-S5, * 22.2 vers ... A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS). In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart. This issue affects Junos OS on MX Series: * All version before 21.2R3-S6, * 21.4 versions before 21.4R3-S6, * 22.1 versions before 22.1R3-S5, * 22.2 versions before 22.2R3-S3,  * 22.3 versions before 22.3R3-S2, * 22.4 versions before 22.4R3, * 23.2 versions before 23.2R2.

Show More

A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device. If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the e ... A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device. If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed. This issue affects Junos OS: * All versions before 20.4R3-S7, * 21.1 versions before 21.1R3,  * 21.2 versions before 21.2R2-S1, 21.2R3,  * 21.3 versions before 21.3R1-S2, 21.3R2.

Show More

Juniper Junos 10.0 before 10.0S28, 10.4 before 10.4R7, 11.1 before 11.1R5, 11.2 before 11.2R2, and 11.4 before 11.4R1, when in a Next-Generation Multicast VPN (NGEN MVPN) environment, allows remote attackers to cause a denial of service (RPD routing daemon crash) via a large number of crafted PIM (S,G) join requests.

Juniper Junos 10.4S before 10.4S15, 10.4R before 10.4R16, 11.4 before 11.4R9, and 12.1R before 12.1R7 on SRX Series service gateways allows remote attackers to cause a denial of service (flowd crash) via a crafted IP packet.

Juniper Junos 10.4 before 10.4R16, 11.4 before 11.4R10, 12.1R before 12.1R8-S2, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, 12.2 before 12.2R7, 12.3 before 12.3R4-S2, 13.1 before 13.1R3-S1, 13.2 before 13.2R2, and 13.3 before 13.3R1 allows remote attackers to cause a denial of service (rdp crash) via a large BGP UPDATE message which immediately triggers a withdraw message to be sent, as demonstrated by a long AS_PATH and a large number of BGP Communities.

flowd in Juniper Junos 10.4 before 10.4R11 on SRX devices, when the MSRPC Application Layer Gateway (ALG) is enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted MSRPC requests, aka PR 772834.

The XNM command processor in Juniper Junos 10.4 before 10.4R16, 11.4 before 11.4R10, 12.1R before 12.1R8-S2, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, 12.2 before 12.2R7, 12.3 before 12.3R5, 13.1 before 13.1R3-S1, 13.2 before 13.2R2-S2, and 13.3 before 13.3R1, when xnm-ssl or xnm-clear-text is enabled, allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors.

flowd in Juniper Junos 10.4 before 10.4S14, 11.2 and 11.4 before 11.4R6-S2, and 12.1 before 12.1R6 on SRX devices, when certain Application Layer Gateways (ALGs) are enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted TCP packets, aka PRs 727980, 806269, and 835593.

Juniper Junos before 10.4S14, 11.4 before 11.4R5-S2, 12.1R before 12.1R3, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D15 on SRX Series services gateways, when a plugin using TCP proxy is configured, allows remote attackers to cause a denial of service (flow daemon crash) via an unspecified sequence of TCP packets.

Buffer overflow in the flow daemon (flowd) in Juniper Junos 10.4 before 10.4S14, 11.4 before 11.4R7-S2, 12.1.X44 before 12.1X44-D15, 12.1X45 before 12.1X45-D10 on SRX devices, when using telnet pass-through authentication on the firewall, might allow remote attackers to execute arbitrary code via a crafted telnet message.

Juniper Junos 10.4 before 10.4R16, 11.4 before 11.4R10, 12.1R before 12.1R8-S2, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, 12.2 before 12.2R7, 12.3 before 12.3R5, 13.1 before 13.1R3-S1, 13.2 before 13.2R2, and 13.3 before 13.3R1 allows local users to gain privileges via vectors related to "certain combinations of Junos OS CLI commands and arguments."