Vulnerabilities (CVE)

A vulnerability was determined in PluXml up to 5.8.22. Affected is the function FileCookieJar::__destruct of the file core/admin/medias.php of the component Media Management Module. Executing a manipulation of the argument File can lead to deserialization. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was informed early about this issue and announced that "[w]e fix this issue in the next version 5.8.23". A patch for it is ready.

A vulnerability was found in LigeroSmart up to 6.1.24. This affects an unknown part of the component Environment Variable Handler. Performing a manipulation of the argument REQUEST_URI results in cross site scripting. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 6.1.26 and 6.3 is able to mitigate this issue. The patch is named 264ac5b2be5b3c673ebd8cb862e673f5d300d9a7. The affected component should be upgraded.

A wrong permission check in KNIME Business Hub before version 1.17.0 allowed an authenticated user to save jobs of other users as if there were saved by the job owner. The attacker must have permissions to access the jobs but then they were saved into the catalog service using the wrong owner permissions. Therefore it may have been possible to save into spaces where the attacker does not have write permissions. There is no workaround.

On April 18th 2025, Microsoft announced Exchange Server Security Changes for Hybrid Deployments and accompanying non-security Hot Fix. Microsoft made these changes in the general interest of improving the security of hybrid Exchange deployments. Following further investigation, Microsoft identified specific security implications tied to the guidance and configuration steps outlined in the April announcement. Microsoft is issuing CVE-2025-53786 to document a vulnerability that is addressed by tak ... On April 18th 2025, Microsoft announced Exchange Server Security Changes for Hybrid Deployments and accompanying non-security Hot Fix. Microsoft made these changes in the general interest of improving the security of hybrid Exchange deployments. Following further investigation, Microsoft identified specific security implications tied to the guidance and configuration steps outlined in the April announcement. Microsoft is issuing CVE-2025-53786 to document a vulnerability that is addressed by taking the steps documented with the April 18th announcement. Microsoft strongly recommends reading the information, installing the April 2025 (or later) Hot Fix and implementing the changes in your Exchange Server and hybrid environment.

Show More

smanga 3.2.7 does not filter the file parameter at the PHP/get file flow.php interface, resulting in a path traversal vulnerability that can cause arbitrary file reading.

A time-of-create-to-time-of-use (TOCTOU) vulnerability lets recently deleted-then-recreated data sources be re-deleted without permission to do so. This requires several very stringent conditions to be met: - The attacker must have admin access to the specific datasource prior to its first deletion. - Upon deletion, all steps within the attack must happen within the next 30 seconds and on the same pod of Grafana. - The attacker must delete the datasource, then someone must recreate it. - The n ... A time-of-create-to-time-of-use (TOCTOU) vulnerability lets recently deleted-then-recreated data sources be re-deleted without permission to do so. This requires several very stringent conditions to be met: - The attacker must have admin access to the specific datasource prior to its first deletion. - Upon deletion, all steps within the attack must happen within the next 30 seconds and on the same pod of Grafana. - The attacker must delete the datasource, then someone must recreate it. - The new datasource must not have the attacker as an admin. - The new datasource must have the same UID as the prior datasource. These are randomised by default. - The datasource can now be re-deleted by the attacker. - Once 30 seconds are up, the attack is spent and cannot be repeated. - No datasource with any other UID can be attacked.

Show More

Information Exposure Vulnerability in Hitachi Ops Center API Configuration Manager, Hitachi Configuration Manager, Hitachi Device Manager allows Session Hijacking.This issue affects Hitachi Ops Center API Configuration Manager: from 10.0.0-00 before 11.0.5-00; Hitachi Configuration Manager: from 8.5.1-00 before 11.0.5-00; Hitachi Device Manager: from 8.4.1-00 before 8.6.5-00.

Fiber is an Express inspired web framework written in Go. A Path Traversal (CWE-22) vulnerability in Fiber allows a remote attacker to bypass the static middleware sanitizer and read arbitrary files on the server file system on Windows. This affects Fiber v3 through version 3.0.0. This has been patched in Fiber v3 version 3.1.0.

Fiber is an Express inspired web framework written in Go. A denial of service vulnerability exists in Fiber v2 and v3 that allows remote attackers to crash the application by sending requests to routes with more than 30 parameters. The vulnerability results from missing validation during route registration combined with an unbounded array write during request matching. Version 2.52.12 patches the issue in the v2 branch and 3.1.0 patches the issue in the v3 branch.

All versions of InSAT MasterSCADA BUK-TS are susceptible to OS command injection through a field in its MMadmServ web interface. Malicious users that use the vulnerable endpoint are potentially able to cause remote code execution.

InSAT MasterSCADA BUK-TS is susceptible to SQL Injection through its main web interface. Malicious users that use the vulnerable endpoint are potentially able to cause remote code execution.

SummaryThis advisory addresses a SQL injection vulnerability in the API endpoint used for retrieving contact activities. A vulnerability exists in the query construction for the Contact Activity timeline where the parameter responsible for determining the sort direction was not strictly validated against an allowlist, potentially allowing authenticated users to inject arbitrary SQL commands via the API. MitigationPlease update to 4.4.19, 5.2.10, 6.0.8, 7.0.1 or later. WorkaroundsNone. Referen ... SummaryThis advisory addresses a SQL injection vulnerability in the API endpoint used for retrieving contact activities. A vulnerability exists in the query construction for the Contact Activity timeline where the parameter responsible for determining the sort direction was not strictly validated against an allowlist, potentially allowing authenticated users to inject arbitrary SQL commands via the API. MitigationPlease update to 4.4.19, 5.2.10, 6.0.8, 7.0.1 or later. WorkaroundsNone. ReferencesIf you have any questions or comments about this advisory: Email us at [email protected]

Show More

Tattile Smart+, Vega, and Basic device families firmware versions 1.181.5 and prior implement an authentication token (X-User-Token) with insufficient expiration. An attacker who obtains a valid token (for example via interception, log exposure, or token reuse on a shared system) can continue to authenticate to the management interface until the token is revoked, enabling unauthorized access to device functions and data.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in skb_segment_list for GRO packets When skb_segment_list() is called during packet forwarding, it handles packets that were aggregated by the GRO engine. Historically, the segmentation logic in skb_segment_list assumes that individual segments are split from a parent SKB and may need to carry their own socket memory accounting. Accordingly, the code transfers truesize from the parent to the newly created ... In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in skb_segment_list for GRO packets When skb_segment_list() is called during packet forwarding, it handles packets that were aggregated by the GRO engine. Historically, the segmentation logic in skb_segment_list assumes that individual segments are split from a parent SKB and may need to carry their own socket memory accounting. Accordingly, the code transfers truesize from the parent to the newly created segments. Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this truesize subtraction in skb_segment_list() was valid because fragments still carry a reference to the original socket. However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed this behavior by ensuring that fraglist entries are explicitly orphaned (skb->sk = NULL) to prevent illegal orphaning later in the stack. This change meant that the entire socket memory charge remained with the head SKB, but the corresponding accounting logic in skb_segment_list() was never updated. As a result, the current code unconditionally adds each fragment's truesize to delta_truesize and subtracts it from the parent SKB. Since the fragments are no longer charged to the socket, this subtraction results in an effective under-count of memory when the head is freed. This causes sk_wmem_alloc to remain non-zero, preventing socket destruction and leading to a persistent memory leak. The leak can be observed via KMEMLEAK when tearing down the networking environment: unreferenced object 0xffff8881e6eb9100 (size 2048): comm "ping", pid 6720, jiffies 4295492526 backtrace: kmem_cache_alloc_noprof+0x5c6/0x800 sk_prot_alloc+0x5b/0x220 sk_alloc+0x35/0xa00 inet6_create.part.0+0x303/0x10d0 __sock_create+0x248/0x640 __sys_socket+0x11b/0x1d0 Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST packets constructed by GRO, the truesize adjustment is removed. The call to skb_release_head_state() must be preserved. As documented in commit cf673ed0e057 ("net: fix fraglist segmentation reference count leak"), it is still required to correctly drop references to SKB extensions that may be overwritten during __copy_skb_header().

Show More

Bio-Formats versions up to and including 8.3.0 perform unsafe Java deserialization of attacker-controlled memoization cache files (.bfmemo) during image processing. The loci.formats.Memoizer class automatically loads and deserializes memo files associated with images without validation, integrity checks, or trust enforcement. An attacker who can supply a crafted .bfmemo file alongside an image can trigger deserialization of untrusted data, which may result in denial of service, logic manipulatio ... Bio-Formats versions up to and including 8.3.0 perform unsafe Java deserialization of attacker-controlled memoization cache files (.bfmemo) during image processing. The loci.formats.Memoizer class automatically loads and deserializes memo files associated with images without validation, integrity checks, or trust enforcement. An attacker who can supply a crafted .bfmemo file alongside an image can trigger deserialization of untrusted data, which may result in denial of service, logic manipulation, or potentially remote code execution in environments where suitable gadget chains are present on the classpath.

Show More

Bio-Formats versions up to and including 8.3.0 contain an XML External Entity (XXE) vulnerability in the Leica Microsystems metadata parsing component (e.g., XLEF). The parser uses an insecurely configured DocumentBuilderFactory when processing Leica XML-based metadata files, allowing external entity expansion and external DTD loading. A crafted metadata file can trigger outbound network requests (SSRF), access local system resources where readable, or cause a denial of service during XML parsin ... Bio-Formats versions up to and including 8.3.0 contain an XML External Entity (XXE) vulnerability in the Leica Microsystems metadata parsing component (e.g., XLEF). The parser uses an insecurely configured DocumentBuilderFactory when processing Leica XML-based metadata files, allowing external entity expansion and external DTD loading. A crafted metadata file can trigger outbound network requests (SSRF), access local system resources where readable, or cause a denial of service during XML parsing.

Show More

A security vulnerability has been detected in Rareprob HD Video Player All Formats App 12.1.372 on Android. Impacted is an unknown function of the component com.rocks.music.videoplayer. The manipulation leads to path traversal. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Wondershare MobileGo 8.5.0 contains an insecure file permissions vulnerability that allows local users to modify executable files in the application directory. Attackers can replace the original MobileGo.exe with a malicious executable to create a new user account and add it to the Administrators group with full system access.

Klaw is a self-service Apache Kafka Topic Management/Governance tool/portal. Prior to 2.10.2, there is an improper access control vulnerability that allows unauthorized users to trigger a reset or deletion of metadata for any tenant. By sending a crafted request to the /resetMemoryCache endpoint, an attacker can clear cached configurations, environments, and cluster data. This vulnerability is fixed in 2.10.2.

Arbitrary file read in the model loading mechanism (HDF5 integration) in Keras versions 3.0.0 through 3.13.1 on all supported platforms allows a remote attacker to read local files and disclose sensitive information via a crafted .keras model file utilizing HDF5 external dataset references.

SpotMSN 2.4.6 contains a denial of service vulnerability in the registration name input field that allows attackers to crash the application. Attackers can generate a 1000-character payload and paste it into the 'Name' field to trigger an application crash.

SpotIM 2.2 contains a denial of service vulnerability that allows attackers to crash the application by inputting a large buffer in the registration name field. Attackers can generate a 1000-character payload and paste it into the 'Name' field to trigger an application crash.

SpotIE 2.9.5 contains a denial of service vulnerability in the registration key input that allows attackers to crash the application. Attackers can generate a 1000-character buffer payload and paste it into the 'Key' field to trigger an application crash.

SpotDialup 1.6.7 contains a denial of service vulnerability in the registration key input field that allows attackers to crash the application. Attackers can generate a 1000-character buffer payload and paste it into the 'Key' field to trigger an application crash.

ShareAlarmPro contains a denial of service vulnerability that allows attackers to crash the application by supplying an oversized registration key. Attackers can generate a 1000-character buffer payload to trigger an application crash when pasted into the registration key field.

Dnss Domain Name Search Software contains a denial of service vulnerability that allows attackers to crash the application by overflowing the 'Name' input field. Attackers can generate a 1000-character buffer payload and paste it into the registration name field to trigger an application crash.

NBMonitor 1.6.6.0 contains a denial of service vulnerability in its registration key input that allows attackers to crash the application. Attackers can generate a 1000-character buffer payload and paste it into the 'Key' field to trigger an application crash.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below ... In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the ... In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? pr ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the c ... In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's.

Show More

In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_ ... In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_read_bh_nowait submit_bh dm_submit_bio do_worker process_deferred_bios commit metadata_operation_failed dm_pool_abort_metadata down_write(&pmd->root_lock) - LOCK B __destroy_persistent_data_objects dm_block_manager_destroy dm_bufio_client_destroy unregister_shrinker down_write(&shrinker_rwsem) thin_map | dm_thin_find_block ↓ down_read(&pmd->root_lock) --> ABBA deadlock , which triggers hung task: [ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds. [ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2 [ 76.978534] Workqueue: dm-thin do_worker [ 76.978552] Call Trace: [ 76.978564] __schedule+0x6ba/0x10f0 [ 76.978582] schedule+0x9d/0x1e0 [ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0 [ 76.978600] down_write+0xec/0x110 [ 76.978607] unregister_shrinker+0x2c/0xf0 [ 76.978616] dm_bufio_client_destroy+0x116/0x3d0 [ 76.978625] dm_block_manager_destroy+0x19/0x40 [ 76.978629] __destroy_persistent_data_objects+0x5e/0x70 [ 76.978636] dm_pool_abort_metadata+0x8e/0x100 [ 76.978643] metadata_operation_failed+0x86/0x110 [ 76.978649] commit+0x6a/0x230 [ 76.978655] do_worker+0xc6e/0xd90 [ 76.978702] process_one_work+0x269/0x630 [ 76.978714] worker_thread+0x266/0x630 [ 76.978730] kthread+0x151/0x1b0 [ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds. [ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459 [ 76.982128] Call Trace: [ 76.982139] __schedule+0x6ba/0x10f0 [ 76.982155] schedule+0x9d/0x1e0 [ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910 [ 76.982173] down_read+0x84/0x170 [ 76.982177] dm_thin_find_block+0x4c/0xd0 [ 76.982183] thin_map+0x201/0x3d0 [ 76.982188] __map_bio+0x5b/0x350 [ 76.982195] dm_submit_bio+0x2b6/0x930 [ 76.982202] __submit_bio+0x123/0x2d0 [ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0 [ 76.982222] submit_bio_noacct+0x389/0x770 [ 76.982227] submit_bio+0x50/0xc0 [ 76.982232] submit_bh_wbc+0x15e/0x230 [ 76.982238] submit_bh+0x14/0x20 [ 76.982241] ext4_read_bh_nowait+0xc5/0x130 [ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60 [ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0 [ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0 [ 76.982263] ext4_discard_preallocations+0x45d/0x830 [ 76.982274] ext4_clear_inode+0x48/0xf0 [ 76.982280] ext4_evict_inode+0xcf/0xc70 [ 76.982285] evict+0x119/0x2b0 [ 76.982290] dispose_list+0x43/0xa0 [ 76.982294] prune_icache_sb+0x64/0x90 [ 76.982298] super_cache_scan+0x155/0x210 [ 76.982303] do_shrink_slab+0x19e/0x4e0 [ 76.982310] shrink_slab+0x2bd/0x450 [ 76.982317] drop_slab+0xcc/0x1a0 [ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0 [ 76.982327] proc_sys_call_handler+0x1bc/0x300 [ 76.982331] proc_sys_write+0x17/0x20 [ 76.982334] vfs_write+0x3d3/0x570 [ 76.982342] ksys_write+0x73/0x160 [ 76.982347] __x64_sys_write+0x1e/0x30 [ 76.982352] do_syscall_64+0x35/0x80 [ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd Funct ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: media: i2c: hi846: Fix memory leak in hi846_parse_dt() If any of the checks related to the supported link frequencies fail, then the V4L2 fwnode resources don't get released before returning, which leads to a memleak. Fix this by properly freeing the V4L2 fwnode data in a designated label.

In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: fix possible memory leak in solo_sysfs_init() If device_register() returns error in solo_sysfs_init(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup().

In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninititialized value in 'ext4_evict_inode' Syzbot found the following issue: ===================================================== BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 evict+0x365/0x9a0 fs/inode.c:664 iput_final fs/inode.c:1747 [inline] iput+0x985/0xdd0 fs/inode.c:1773 __ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361 ex ... In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninititialized value in 'ext4_evict_inode' Syzbot found the following issue: ===================================================== BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 evict+0x365/0x9a0 fs/inode.c:664 iput_final fs/inode.c:1747 [inline] iput+0x985/0xdd0 fs/inode.c:1773 __ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361 ext4_mknod+0x376/0x840 fs/ext4/namei.c:2844 vfs_mknod+0x79d/0x830 fs/namei.c:3914 do_mknodat+0x47d/0xaa0 __do_sys_mknodat fs/namei.c:3992 [inline] __se_sys_mknodat fs/namei.c:3989 [inline] __ia32_sys_mknodat+0xeb/0x150 fs/namei.c:3989 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f1/0xe80 mm/page_alloc.c:5578 alloc_pages+0xaae/0xd80 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x1b5/0x1010 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0x10c3/0x2d60 mm/slub.c:3180 __slab_alloc mm/slub.c:3279 [inline] slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x6f3/0xb30 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3117 [inline] ext4_alloc_inode+0x5f/0x860 fs/ext4/super.c:1321 alloc_inode+0x83/0x440 fs/inode.c:259 new_inode_pseudo fs/inode.c:1018 [inline] new_inode+0x3b/0x430 fs/inode.c:1046 __ext4_new_inode+0x2a7/0x7ec0 fs/ext4/ialloc.c:959 ext4_mkdir+0x4d5/0x1560 fs/ext4/namei.c:2992 vfs_mkdir+0x62a/0x870 fs/namei.c:4035 do_mkdirat+0x466/0x7b0 fs/namei.c:4060 __do_sys_mkdirat fs/namei.c:4075 [inline] __se_sys_mkdirat fs/namei.c:4073 [inline] __ia32_sys_mkdirat+0xc4/0x120 fs/namei.c:4073 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 ===================================================== Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after 6bc0d63dad7f commit will access 'ei->i_flags' in 'ext4_evict_inode()' which will lead to access uninit-value. To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'.

Show More

In the Linux kernel, the following vulnerability has been resolved: r6040: Fix kmemleak in probe and remove There is a memory leaks reported by kmemleak: unreferenced object 0xffff888116111000 (size 2048): comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s) hex dump (first 32 bytes): 00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................ 08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_t ... In the Linux kernel, the following vulnerability has been resolved: r6040: Fix kmemleak in probe and remove There is a memory leaks reported by kmemleak: unreferenced object 0xffff888116111000 (size 2048): comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s) hex dump (first 32 bytes): 00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................ 08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffff827e20ee>] phy_device_create+0x4e/0x90 [<ffffffff827e6072>] get_phy_device+0xd2/0x220 [<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0 [<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0 [<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040] ... The problem occurs in probe process as follows: r6040_init_one: mdiobus_register mdiobus_scan <- alloc and register phy_device, the reference count of phy_device is 3 r6040_mii_probe phy_connect <- connect to the first phy_device, so the reference count of the first phy_device is 4, others are 3 register_netdev <- fault inject succeeded, goto error handling path // error handling path err_out_mdio_unregister: mdiobus_unregister(lp->mii_bus); err_out_mdio: mdiobus_free(lp->mii_bus); <- the reference count of the first phy_device is 1, it is not released and other phy_devices are released // similarly, the remove process also has the same problem The root cause is traced to the phy_device is not disconnected when removes one r6040 device in r6040_remove_one() or on error handling path after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet device is connected to the first PHY device of mii_bus, in order to notify the connected driver when the link status changes, which is the default behavior of the PHY infrastructure to handle everything. Therefore the phy_device should be disconnected when removes one r6040 device or on error handling path. Fix it by adding phy_disconnect() when removes one r6040 device or on error handling path after r6040_mii probed successfully.

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix mr->map double free rxe_mr_cleanup() which tries to free mr->map again will be called when rxe_mr_init_user() fails: CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x5d panic+0x19e/0x349 end_ ... In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix mr->map double free rxe_mr_cleanup() which tries to free mr->map again will be called when rxe_mr_init_user() fails: CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x5d panic+0x19e/0x349 end_report.part.0+0x54/0x7c kasan_report.cold+0xa/0xf rxe_mr_cleanup+0x9d/0xf0 [rdma_rxe] __rxe_cleanup+0x10a/0x1e0 [rdma_rxe] rxe_reg_user_mr+0xb7/0xd0 [rdma_rxe] ib_uverbs_reg_mr+0x26a/0x480 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x1a2/0x250 [ib_uverbs] ib_uverbs_cmd_verbs+0x1397/0x15a0 [ib_uverbs] This issue was firstly exposed since commit b18c7da63fcb ("RDMA/rxe: Fix memory leak in error path code") and then we fixed it in commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this fix was reverted together at last by commit 1e75550648da (Revert "RDMA/rxe: Create duplicate mapping tables for FMRs") Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is successfully allocated.

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential me ... In the Linux kernel, the following vulnerability has been resolved: usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.

Show More

In the Linux kernel, the following vulnerability has been resolved: media: si470x: Fix use-after-free in si470x_int_in_callback() syzbot reported use-after-free in si470x_int_in_callback() [1]. This indicates that urb->context, which contains struct si470x_device object, is freed when si470x_int_in_callback() is called. The cause of this issue is that si470x_int_in_callback() is called for freed urb. si470x_usb_driver_probe() calls si470x_start_usb(), which then calls usb_submit_urb() and s ... In the Linux kernel, the following vulnerability has been resolved: media: si470x: Fix use-after-free in si470x_int_in_callback() syzbot reported use-after-free in si470x_int_in_callback() [1]. This indicates that urb->context, which contains struct si470x_device object, is freed when si470x_int_in_callback() is called. The cause of this issue is that si470x_int_in_callback() is called for freed urb. si470x_usb_driver_probe() calls si470x_start_usb(), which then calls usb_submit_urb() and si470x_start(). If si470x_start_usb() fails, si470x_usb_driver_probe() doesn't kill urb, but it just frees struct si470x_device object, as depicted below: si470x_usb_driver_probe() ... si470x_start_usb() ... usb_submit_urb() retval = si470x_start() return retval if (retval < 0) free struct si470x_device object, but don't kill urb This patch fixes this issue by killing urb when si470x_start_usb() fails and urb is submitted. If si470x_start_usb() fails and urb is not submitted, i.e. submitting usb fails, it just frees struct si470x_device object.

Show More