Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requ ... In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception

Show More

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix external_power_changed race bq25890_charger_external_power_changed() dereferences bq->charger, which gets sets in bq25890_power_supply_init() like this: bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where bq25890_charger_external_power ... In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix external_power_changed race bq25890_charger_external_power_changed() dereferences bq->charger, which gets sets in bq25890_power_supply_init() like this: bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where bq25890_charger_external_power_changed() may get called while bq->charger has not been set yet leading to a NULL pointer dereference. This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting the connected charger-type which happens to exactly hit the small window: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0 <snip> Call Trace: <TASK> __power_supply_get_supplier_property+0x19/0x50 class_for_each_device+0xb1/0xe0 power_supply_get_property_from_supplier+0x2e/0x50 bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger] __power_supply_changed_work+0x30/0x40 class_for_each_device+0xb1/0xe0 power_supply_changed_work+0x5f/0xe0 <snip> Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in bq->charger, so bq25890_charger_external_power_changed() can simply directly use the passed in psy argument which is always valid.

Show More

In the Linux kernel, the following vulnerability has been resolved: udf: Fix uninitialized array access for some pathnames For filenames that begin with . and are between 2 and 5 characters long, UDF charset conversion code would read uninitialized memory in the output buffer. The only practical impact is that the name may be prepended a "unification hash" when it is not actually needed but still it is good to fix this.

In the Linux kernel, the following vulnerability has been resolved: irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: don't hold ni_lock when calling truncate_setsize() syzbot is reporting hung task at do_user_addr_fault() [1], for there is a silent deadlock between PG_locked bit and ni_lock lock. Since filemap_update_page() calls filemap_read_folio() after calling folio_trylock() which will set PG_locked bit, ntfs_truncate() must not call truncate_setsize() which will wait for PG_locked bit to be cleared when holding ni_lock lock.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix use after free for wext Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix calltrace warning in amddrm_buddy_fini The following call trace is observed when removing the amdgpu driver, which is caused by that BOs allocated for psp are not freed until removing. [61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy] [61811.450577] Call Trace: [61811.450577] <TASK> [61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu] [61811.450728] amdgpu_ttm_fini+0x207/0x290 [am ... In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix calltrace warning in amddrm_buddy_fini The following call trace is observed when removing the amdgpu driver, which is caused by that BOs allocated for psp are not freed until removing. [61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy] [61811.450577] Call Trace: [61811.450577] <TASK> [61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu] [61811.450728] amdgpu_ttm_fini+0x207/0x290 [amdgpu] [61811.450870] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [61811.451012] gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu] [61811.451166] amdgpu_device_fini_sw+0x117/0x520 [amdgpu] [61811.451306] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [61811.451447] devm_drm_dev_init_release+0x4d/0x80 [drm] [61811.451466] devm_action_release+0x15/0x20 [61811.451469] release_nodes+0x40/0xb0 [61811.451471] devres_release_all+0x9b/0xd0 [61811.451473] __device_release_driver+0x1bb/0x2a0 [61811.451476] driver_detach+0xf3/0x140 [61811.451479] bus_remove_driver+0x6c/0xf0 [61811.451481] driver_unregister+0x31/0x60 [61811.451483] pci_unregister_driver+0x40/0x90 [61811.451486] amdgpu_exit+0x15/0x447 [amdgpu] For smu v13_0_2, if the GPU supports xgmi, refer to commit f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"), it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing, which makes all devices in hive list have hw reset but no resume except the basic ip blocks, then other ip blocks will not call .hw_fini according to ip_block.status.hw. Since psp_free_shared_bufs just includes some software operations, so move it to psp_sw_fini.

Show More

In the Linux kernel, the following vulnerability has been resolved: md/raid10: prevent soft lockup while flush writes Currently, there is no limit for raid1/raid10 plugged bio. While flushing writes, raid1 has cond_resched() while raid10 doesn't, and too many writes can cause soft lockup. Follow up soft lockup can be triggered easily with writeback test for raid10 with ramdisks: watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293] Call Trace: <TASK> call_rcu+0x16/0x20 put_ ... In the Linux kernel, the following vulnerability has been resolved: md/raid10: prevent soft lockup while flush writes Currently, there is no limit for raid1/raid10 plugged bio. While flushing writes, raid1 has cond_resched() while raid10 doesn't, and too many writes can cause soft lockup. Follow up soft lockup can be triggered easily with writeback test for raid10 with ramdisks: watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293] Call Trace: <TASK> call_rcu+0x16/0x20 put_object+0x41/0x80 __delete_object+0x50/0x90 delete_object_full+0x2b/0x40 kmemleak_free+0x46/0xa0 slab_free_freelist_hook.constprop.0+0xed/0x1a0 kmem_cache_free+0xfd/0x300 mempool_free_slab+0x1f/0x30 mempool_free+0x3a/0x100 bio_free+0x59/0x80 bio_put+0xcf/0x2c0 free_r10bio+0xbf/0xf0 raid_end_bio_io+0x78/0xb0 one_write_done+0x8a/0xa0 raid10_end_write_request+0x1b4/0x430 bio_endio+0x175/0x320 brd_submit_bio+0x3b9/0x9b7 [brd] __submit_bio+0x69/0xe0 submit_bio_noacct_nocheck+0x1e6/0x5a0 submit_bio_noacct+0x38c/0x7e0 flush_pending_writes+0xf0/0x240 raid10d+0xac/0x1ed0 Fix the problem by adding cond_resched() to raid10 like what raid1 did. Note that unlimited plugged bio still need to be optimized, for example, in the case of lots of dirty pages writeback, this will take lots of memory and io will spend a long time in plug, hence io latency is bad.

Show More

In the Linux kernel, the following vulnerability has been resolved: drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init() If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp needs to be freed.

In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inl ... In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens.

Show More

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() If device_register() fails in cxl_pci_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_de ... In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() If device_register() fails in cxl_pci_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

Show More

In the Linux kernel, the following vulnerability has been resolved: rapidio: fix possible UAF when kfifo_alloc() fails If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free priv. But priv is still in the chdev->file_list, then list traversal may cause UAF. This fixes the following smatch warning: drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci: fix of node refcount leak in tcpci_register_port() I got the following report while doing device(mt6370-tcpc) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@34/tcpc/connector The 'fwnode' set in tcpci_parse_config() which is called in t ... In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci: fix of node refcount leak in tcpci_register_port() I got the following report while doing device(mt6370-tcpc) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@34/tcpc/connector The 'fwnode' set in tcpci_parse_config() which is called in tcpci_register_port(), its node refcount is increased in device_get_named_child_node(). It needs be put while exiting, so call fwnode_handle_put() in the error path of tcpci_register_port() and in tcpci_unregister_port() to avoid leak.

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released.

In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. ... In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. This will cause the subsequent re-offload operation of this offline CPU, which will pass the conditional check and the kthread_unpark() will access invalid rdp's->nocb_cb_kthread pointer. This commit therefore use rdp's->nocb_gp_kthread instead of rdp_gp's->nocb_gp_kthread for safety check.

Show More

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with obtaining a folio and accessing it even though the entry is swp_entry_t. Add the missing check and let split_huge_pmd() handle migration entries. While at it also remove unnecessary folio check. [[email protected]: remove extra folio check, per David]

In the Linux kernel, the following vulnerability has been resolved: iommufd: Prevent ALIGN() overflow When allocating IOVA the candidate range gets aligned to the target alignment. If the range is close to ULONG_MAX then the ALIGN() can wrap resulting in a corrupted iova. Open code the ALIGN() using get_add_overflow() to prevent this. This simplifies the checks as we don't need to check for length earlier either. Consolidate the two copies of this code under a single helper. This bug would ... In the Linux kernel, the following vulnerability has been resolved: iommufd: Prevent ALIGN() overflow When allocating IOVA the candidate range gets aligned to the target alignment. If the range is close to ULONG_MAX then the ALIGN() can wrap resulting in a corrupted iova. Open code the ALIGN() using get_add_overflow() to prevent this. This simplifies the checks as we don't need to check for length earlier either. Consolidate the two copies of this code under a single helper. This bug would allow userspace to create a mapping that overlaps with some other mapping or a reserved range.

Show More

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix NULL dereference in avx512_status() Problem ------- With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status causes a warning and a NULL pointer dereference. This is because the AVX-512 timestamp code uses x86_task_fpu() but doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function for kernel threads (PF_KTHREAD specifically), making it return NULL. The point of the warning was to ensure ... In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix NULL dereference in avx512_status() Problem ------- With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status causes a warning and a NULL pointer dereference. This is because the AVX-512 timestamp code uses x86_task_fpu() but doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function for kernel threads (PF_KTHREAD specifically), making it return NULL. The point of the warning was to ensure that kernel threads only access task->fpu after going through kernel_fpu_begin()/_end(). Note: all kernel tasks exposed in /proc have a valid task->fpu. Solution -------- One option is to silence the warning and check for NULL from x86_task_fpu(). However, that warning is fairly fresh and seems like a defense against misuse of the FPU state in kernel threads. Instead, stop outputting AVX-512_elapsed_ms for kernel threads altogether. The data was garbage anyway because avx512_timestamp is only updated for user threads, not kernel threads. If anyone ever wants to track kernel thread AVX-512 use, they can come back later and do it properly, separate from this bug fix. [ dhansen: mostly rewrite changelog ]

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent infinite recursion If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to using a bounce buffer. However the bounce buffer here is allocated on the stack, and the only alignment requirement here is that it's naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce buffer is also misaligned we then recurse back into the function again, however the new bounce buffer might also no ... In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent infinite recursion If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to using a bounce buffer. However the bounce buffer here is allocated on the stack, and the only alignment requirement here is that it's naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce buffer is also misaligned we then recurse back into the function again, however the new bounce buffer might also not be aligned, and might never be until we eventually blow through the stack, as we keep recursing. Instead of using the stack use kmalloc, which should respect the power-of-two alignment request here. Fixes a kernel panic when triggering this path through eudebug. v2 (Stuart): - Add build bug check for power-of-two restriction - s/EINVAL/ENOMEM/ (cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff)

Show More

In the Linux kernel, the following vulnerability has been resolved: exfat: add cluster chain loop check for dir An infinite loop may occur if the following conditions occur due to file system corruption. (1) Condition for exfat_count_dir_entries() to loop infinitely. - The cluster chain includes a loop. - There is no UNUSED entry in the cluster chain. (2) Condition for exfat_create_upcase_table() to loop infinitely. - The cluster chain of the root directory includes a loop. - ... In the Linux kernel, the following vulnerability has been resolved: exfat: add cluster chain loop check for dir An infinite loop may occur if the following conditions occur due to file system corruption. (1) Condition for exfat_count_dir_entries() to loop infinitely. - The cluster chain includes a loop. - There is no UNUSED entry in the cluster chain. (2) Condition for exfat_create_upcase_table() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and up-case table entry in the cluster chain of the root directory. (3) Condition for exfat_load_bitmap() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and bitmap entry in the cluster chain of the root directory. (4) Condition for exfat_find_dir_entry() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. (5) Condition for exfat_check_dir_empty() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. - All files and sub-directories under the directory are deleted. This commit adds checks to break the above infinite loop.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Make dma-fences compliant with the safe access rules Xe can free some of the data pointed to by the dma-fences it exports. Most notably the timeline name can get freed if userspace closes the associated submit queue. At the same time the fence could have been exported to a third party (for example a sync_fence fd) which will then cause an use- after-free on subsequent access. To make this safe we need to make the driv ... In the Linux kernel, the following vulnerability has been resolved: drm/xe: Make dma-fences compliant with the safe access rules Xe can free some of the data pointed to by the dma-fences it exports. Most notably the timeline name can get freed if userspace closes the associated submit queue. At the same time the fence could have been exported to a third party (for example a sync_fence fd) which will then cause an use- after-free on subsequent access. To make this safe we need to make the driver compliant with the newly documented dma-fence rules. Driver has to ensure a RCU grace period between signalling a fence and freeing any data pointed to by said fence. For the timeline name we simply make the queue be freed via kfree_rcu and for the shared lock associated with multiple queues we add a RCU grace period before freeing the per GT structure holding the lock.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix null pointer access Writing a string without delimiters (' ', '\n', '\0') to the under gpu_od/fan_ctrl sysfs or pp_power_profile_mode for the CUSTOM profile will result in a null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding lapbeth for ops-locked devices. xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 ... In the Linux kernel, the following vulnerability has been resolved: net: lapbether: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding lapbeth for ops-locked devices. xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077 unregister_netdevice_many net/core/dev.c:12140 [inline] unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984 register_netdevice+0x18f1/0x2270 net/core/dev.c:11149 lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline] lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] __dev_notify_flags+0x12c/0x2e0 net/core/dev.c:9497 netif_change_flags+0x108/0x160 net/core/dev.c:9526 dev_change_flags+0xba/0x250 net/core/dev_api.c:68 devinet_ioctl+0x11d5/0x1f50 net/ipv4/devinet.c:1200 inet_ioctl+0x3a7/0x3f0 net/ipv4/af_inet.c:1001 0: https://lore.kernel.org/netdev/[email protected]/

Show More

In the Linux kernel, the following vulnerability has been resolved: xfrm: Duplicate SPI Handling The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI Netlink message, which triggers the kernel function xfrm_alloc_spi(). This function is expected to ensure uniqueness of the Security Parameter Index (SPI) for inbound Security Associations (SAs). However, it can return success even when the requested SPI is already in use, leading to duplicate SPIs assigned to multiple inbound SAs, ... In the Linux kernel, the following vulnerability has been resolved: xfrm: Duplicate SPI Handling The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI Netlink message, which triggers the kernel function xfrm_alloc_spi(). This function is expected to ensure uniqueness of the Security Parameter Index (SPI) for inbound Security Associations (SAs). However, it can return success even when the requested SPI is already in use, leading to duplicate SPIs assigned to multiple inbound SAs, differentiated only by their destination addresses. This behavior causes inconsistencies during SPI lookups for inbound packets. Since the lookup may return an arbitrary SA among those with the same SPI, packet processing can fail, resulting in packet drops. According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA is uniquely identified by the SPI and optionally protocol. Reproducing the Issue Reliably: To consistently reproduce the problem, restrict the available SPI range in charon.conf : spi_min = 0x10000000 spi_max = 0x10000002 This limits the system to only 2 usable SPI values. Next, create more than 2 Child SA. each using unique pair of src/dst address. As soon as the 3rd Child SA is initiated, it will be assigned a duplicate SPI, since the SPI pool is already exhausted. With a narrow SPI range, the issue is consistently reproducible. With a broader/default range, it becomes rare and unpredictable. Current implementation: xfrm_spi_hash() lookup function computes hash using daddr, proto, and family. So if two SAs have the same SPI but different destination addresses, then they will: a. Hash into different buckets b. Be stored in different linked lists (byspi + h) c. Not be seen in the same hlist_for_each_entry_rcu() iteration. As a result, the lookup will result in NULL and kernel allows that Duplicate SPI Proposed Change: xfrm_state_lookup_spi_proto() does a truly global search - across all states, regardless of hash bucket and matches SPI and proto.

Show More

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit 773426f4771b ("crypto: arm/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting ran ... In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit 773426f4771b ("crypto: arm/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

Show More

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl() The UIC completion interrupt may be disabled while an UIC command is being processed. When the UIC completion interrupt is reenabled, an UIC interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit. Hence this patch that removes this kernel warning.

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm64/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit a59e5468a921 ("crypto: arm64/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting ... In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm64/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit a59e5468a921 ("crypto: arm64/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

Show More

In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: defer registered files gc to io_uring release Instead of putting io_uring's registered files in unix_gc() we want it to be done by io_uring itself. The trick here is to consider io_uring registered files for cycle detection but not actually putting them down. Because io_uring can't register other ring instances, this will remove all refs to the ring file triggering the ->release path and clean up with io_ring ... In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: defer registered files gc to io_uring release Instead of putting io_uring's registered files in unix_gc() we want it to be done by io_uring itself. The trick here is to consider io_uring registered files for cycle detection but not actually putting them down. Because io_uring can't register other ring instances, this will remove all refs to the ring file triggering the ->release path and clean up with io_ring_ctx_free(). [axboe: add kerneldoc comment to skb, fold in skb leak fix]

Show More

In the Linux kernel, the following vulnerability has been resolved: NFSD: Protect against send buffer overflow in NFSv2 READDIR Restore the previous limit on the @count argument to prevent a buffer overflow attack.

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix crash on isr after kexec() If the system is rebooted via isr(), the IRQ handler might be triggered before the domain is initialized. Resulting on an invalid memory access error. Fix: [ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070 [ 0.501166] Call trace: [ 0.501174] report_iommu_fault+0x28/0xfc [ 0.501180] mtk_iommu_isr+0x10c/0x1c0 [ joro: ... In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix crash on isr after kexec() If the system is rebooted via isr(), the IRQ handler might be triggered before the domain is initialized. Resulting on an invalid memory access error. Fix: [ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070 [ 0.501166] Call trace: [ 0.501174] report_iommu_fault+0x28/0xfc [ 0.501180] mtk_iommu_isr+0x10c/0x1c0 [ joro: Fixed spelling in commit message ]

Show More

In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix writes in read-only memory region This commit fixes a kernel oops because of a write in some read-only memory: [ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8 ..snip.. [ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP ..snip.. [ 9.269161] Call trace: [ 9.276271] __memcpy+0x5c/0x230 [ 9.278531] snprintf+0x58/0x80 [ 9.2820 ... In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix writes in read-only memory region This commit fixes a kernel oops because of a write in some read-only memory: [ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8 ..snip.. [ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP ..snip.. [ 9.269161] Call trace: [ 9.276271] __memcpy+0x5c/0x230 [ 9.278531] snprintf+0x58/0x80 [ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190 [ 9.284869] qcom_cpufreq_probe+0xc8/0x39c ..snip.. The following line defines a pointer that point to a char buffer stored in read-only memory: char *pvs_name = "speedXX-pvsXX-vXX"; This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the XX values get overridden by the qcom_cpufreq_krait_name_version function. Since the template is actually stored in read-only memory, when the function executes the following call we get an oops: snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", speed, pvs, pvs_ver); To fix this issue, we instead store the template name onto the stack by using the following syntax: char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; Because the `pvs_name` needs to be able to be assigned to NULL, the template buffer is stored in the pvs_name_buffer and not under the pvs_name variable.

Show More

In the Linux kernel, the following vulnerability has been resolved: android: binder: stop saving a pointer to the VMA Do not record a pointer to a VMA outside of the mmap_lock for later use. This is unsafe and there are a number of failure paths *after* the recorded VMA pointer may be freed during setup. There is no callback to the driver to clear the saved pointer from generic mm code. Furthermore, the VMA pointer may become stale if any number of VMA operations end up freeing the VMA so s ... In the Linux kernel, the following vulnerability has been resolved: android: binder: stop saving a pointer to the VMA Do not record a pointer to a VMA outside of the mmap_lock for later use. This is unsafe and there are a number of failure paths *after* the recorded VMA pointer may be freed during setup. There is no callback to the driver to clear the saved pointer from generic mm code. Furthermore, the VMA pointer may become stale if any number of VMA operations end up freeing the VMA so saving it was fragile to being with. Instead, change the binder_alloc struct to record the start address of the VMA and use vma_lookup() to get the vma when needed. Add lockdep mmap_lock checks on updates to the vma pointer to ensure the lock is held and depend on that lock for synchronization of readers and writers - which was already the case anyways, so the smp_wmb()/smp_rmb() was not necessary. [[email protected]: fix drivers/android/binder_alloc_selftest.c]

Show More

IBM Concert 1.0.0 through 2.0.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict-Transport-Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath11k_pci_alloc_msi(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This results in the below warning: WARNING: CPU: 7 PID: 349 at kernel/irq/ ... In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath11k_pci_alloc_msi(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This results in the below warning: WARNING: CPU: 7 PID: 349 at kernel/irq/manage.c:1929 free_irq+0x278/0x29c Call trace: free_irq+0x278/0x29c ath11k_pcic_free_irq+0x70/0x10c [ath11k] ath11k_pci_probe+0x800/0x820 [ath11k_pci] local_pci_probe+0x40/0xbc The warning is due to not clearing the affinity hint before freeing the IRQs. So to fix this issue, clear the IRQ affinity hint before calling ath11k_pcic_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1

Show More

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0 ... In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: allow small head cache usage with large MAX_SKB_FRAGS values Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_n ... In the Linux kernel, the following vulnerability has been resolved: net: allow small head cache usage with large MAX_SKB_FRAGS values Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0 Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48 RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6 RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168 R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gro_cells_init+0x1ba/0x270 xfrm_input_init+0x4b/0x2a0 xfrm_init+0x38/0x50 ip_rt_init+0x2d7/0x350 ip_init+0xf/0x20 inet_init+0x406/0x590 do_one_initcall+0x9d/0x2e0 do_initcalls+0x23b/0x280 kernel_init_freeable+0x445/0x490 kernel_init+0x20/0x1d0 ret_from_fork+0x46/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 584330 hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0 hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0 softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470 softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0 on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024) is smaller than GRO_MAX_HEAD. Such built additionally contains the revert of the single page frag cache so that napi_get_frags() ends up using the page frag allocator, triggering the splat. Note that the underlying issue is independent from the mentioned revert; address it ensuring that the small head cache will fit either TCP and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb() to select kmalloc() usage for any allocation fitting such cache.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read ... In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up).

Show More

In the Linux kernel, the following vulnerability has been resolved: cachestat: do not flush stats in recency check syzbot detects that cachestat() is flushing stats, which can sleep, in its RCU read section (see [1]). This is done in the workingset_test_recent() step (which checks if the folio's eviction is recent). Move the stat flushing step to before the RCU read section of cachestat, and skip stat flushing during the recency check. [1]: https://lore.kernel.org/cgroups/000000000000f71227 ... In the Linux kernel, the following vulnerability has been resolved: cachestat: do not flush stats in recency check syzbot detects that cachestat() is flushing stats, which can sleep, in its RCU read section (see [1]). This is done in the workingset_test_recent() step (which checks if the folio's eviction is recent). Move the stat flushing step to before the RCU read section of cachestat, and skip stat flushing during the recency check. [1]: https://lore.kernel.org/cgroups/[email protected]/

Show More

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: ofpart: Fix refcount leak in bcm4908_partitions_fw_offset of_find_node_by_path() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check stream id dml21 wrapper to get plane_id [Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x ... In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check stream id dml21 wrapper to get plane_id [Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi [ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu [ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024 [ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu] [ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87 [ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246 [ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000 [ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000 [ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000 [ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000 [ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000 [ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0 [ 35.751806] PKRU: 55555554 [ 35.751807] Call Trace: [ 35.751810] <TASK> [ 35.751816] ? show_regs+0x6c/0x80 [ 35.751820] ? __warn+0x88/0x140 [ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751964] ? report_bug+0x182/0x1b0 [ 35.751969] ? handle_bug+0x6e/0xb0 [ 35.751972] ? exc_invalid_op+0x18/0x80 [ 35.751974] ? asm_exc_invalid_op+0x1b/0x20 [ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.752117] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752260] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752403] ? math_pow+0x11/0xa0 [amdgpu] [ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu] [ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu] (cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)

Show More