Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent potential UAF If we hit the error path, the previous fence (if there is one) has already been put() prior to this, so doing a fence_wait could lead to UAF. Tweak the flow to do to the put() until after we do the wait. (cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e)

In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list In shrink_folio_list(), the hwpoisoned folio may be large folio, which can't be handled by unmap_poisoned_folio(). For THP, try_to_unmap_one() must be passed with TTU_SPLIT_HUGE_PMD to split huge PMD first and then retry. Without TTU_SPLIT_HUGE_PMD, we will trigger null-ptr deref of pvmw.pte. Even we passed TTU_SPLIT_HUGE_PMD, we will trigger a WARN_ON_ONCE ... In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list In shrink_folio_list(), the hwpoisoned folio may be large folio, which can't be handled by unmap_poisoned_folio(). For THP, try_to_unmap_one() must be passed with TTU_SPLIT_HUGE_PMD to split huge PMD first and then retry. Without TTU_SPLIT_HUGE_PMD, we will trigger null-ptr deref of pvmw.pte. Even we passed TTU_SPLIT_HUGE_PMD, we will trigger a WARN_ON_ONCE due to the page isn't in swapcache. Since UCE is rare in real world, and race with reclaimation is more rare, just skipping the hwpoisoned large folio is enough. memory_failure() will handle it if the UCE is triggered again. This happens when memory reclaim for large folio races with memory_failure(), and will lead to kernel panic. The race is as follows: cpu0 cpu1 shrink_folio_list memory_failure TestSetPageHWPoison unmap_poisoned_folio --> trigger BUG_ON due to unmap_poisoned_folio couldn't handle large folio [[email protected]: add comment to unmap_poisoned_folio()]

Show More

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix unbuffered write error handling If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter(). LONG_MAX was chosen ... In the Linux kernel, the following vulnerability has been resolved: netfs: Fix unbuffered write error handling If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter(). LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them. Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero. This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed: CIFS: VFS: Send error in write = -28 followed by: BUG: kernel NULL pointer dereference, address: 0000000000000008 with: RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0 or: RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755) Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to.

Show More

In the Linux kernel, the following vulnerability has been resolved: media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval Getting / Setting the frame interval using the V4L2 subdev pad ops get_frame_interval/set_frame_interval causes a deadlock, as the subdev state is locked in the [1] but also in the driver itself. In [2] it's described that the caller is responsible to acquire and release the lock in this case. Therefore, acquiring the lock in the driver is wrong. Remove th ... In the Linux kernel, the following vulnerability has been resolved: media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval Getting / Setting the frame interval using the V4L2 subdev pad ops get_frame_interval/set_frame_interval causes a deadlock, as the subdev state is locked in the [1] but also in the driver itself. In [2] it's described that the caller is responsible to acquire and release the lock in this case. Therefore, acquiring the lock in the driver is wrong. Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval() and mt9m114_ifp_set_frame_interval(). [1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129 [2] Documentation/driver-api/media/v4l2-subdev.rst

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/mcde: Fix refcount leak in mcde_dsi_bind Every iteration of for_each_available_child_of_node() decrements the reference counter of the previous node. There is no decrement when break out from the loop and results in refcount leak. Add missing of_node_put() to fix this.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: remove refcounting in expectation dumpers Same pattern as previous patch: do not keep the expectation object alive via refcount, only store a cookie value and then use that as the skip hint for dump resumption. AFAICS this has the same issue as the one resolved in the conntrack dumper, when we do if (!refcount_inc_not_zero(&exp->use)) to increment the refcount, there is a chance that exp == last, whic ... In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: remove refcounting in expectation dumpers Same pattern as previous patch: do not keep the expectation object alive via refcount, only store a cookie value and then use that as the skip hint for dump resumption. AFAICS this has the same issue as the one resolved in the conntrack dumper, when we do if (!refcount_inc_not_zero(&exp->use)) to increment the refcount, there is a chance that exp == last, which causes a double-increment of the refcount and subsequent memory leak.

Show More

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: fix ida_free call while not allocated In the snd_utimer_create() function, if the kasprintf() function return NULL, snd_utimer_put_id() will be called, finally use ida_free() to free the unallocated id 0. the syzkaller reported the following information: ------------[ cut here ]------------ ida_free called for id=0 which is not allocated. WARNING: CPU: 1 PID: 1286 at lib/idr.c:592 ida_free+0x1fd/0x2f0 lib/i ... In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: fix ida_free call while not allocated In the snd_utimer_create() function, if the kasprintf() function return NULL, snd_utimer_put_id() will be called, finally use ida_free() to free the unallocated id 0. the syzkaller reported the following information: ------------[ cut here ]------------ ida_free called for id=0 which is not allocated. WARNING: CPU: 1 PID: 1286 at lib/idr.c:592 ida_free+0x1fd/0x2f0 lib/idr.c:592 Modules linked in: CPU: 1 UID: 0 PID: 1286 Comm: syz-executor164 Not tainted 6.15.8 #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 RIP: 0010:ida_free+0x1fd/0x2f0 lib/idr.c:592 Code: f8 fc 41 83 fc 3e 76 69 e8 70 b2 f8 (...) RSP: 0018:ffffc900007f79c8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 1ffff920000fef3b RCX: ffffffff872176a5 RDX: ffff88800369d200 RSI: 0000000000000000 RDI: ffff88800369d200 RBP: 0000000000000000 R08: ffffffff87ba60a5 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f6f1abc1740(0000) GS:ffff8880d76a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f1ad7a784 CR3: 000000007a6e2000 CR4: 00000000000006f0 Call Trace: <TASK> snd_utimer_put_id sound/core/timer.c:2043 [inline] [snd_timer] snd_utimer_create+0x59b/0x6a0 sound/core/timer.c:2184 [snd_timer] snd_utimer_ioctl_create sound/core/timer.c:2202 [inline] [snd_timer] __snd_timer_user_ioctl.isra.0+0x724/0x1340 sound/core/timer.c:2287 [snd_timer] snd_timer_user_ioctl+0x75/0xc0 sound/core/timer.c:2298 [snd_timer] vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x198/0x200 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x7b/0x160 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] The utimer->id should be set properly before the kasprintf() function, ensures the snd_utimer_put_id() function will free the allocated id.

Show More

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Optimize module load time by optimizing PLT/GOT counting When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock, the relevant logs are as follows: rcu: INFO: rcu_sched self-detected stall on CPU ... Call Trace: [<900000000024f9e4>] show_stack+0x5c/0x180 [<90000000002482f4>] dump_stack_lvl+0x94/0xbc [<9000000000224544>] rcu_dump_cpu_stack ... In the Linux kernel, the following vulnerability has been resolved: LoongArch: Optimize module load time by optimizing PLT/GOT counting When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock, the relevant logs are as follows: rcu: INFO: rcu_sched self-detected stall on CPU ... Call Trace: [<900000000024f9e4>] show_stack+0x5c/0x180 [<90000000002482f4>] dump_stack_lvl+0x94/0xbc [<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280 [<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88 [<9000000000396c34>] update_process_times+0xb4/0x150 [<90000000003b2474>] tick_nohz_handler+0xf4/0x250 [<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428 [<9000000000399b2c>] hrtimer_interrupt+0x214/0x538 [<9000000000253634>] constant_timer_interrupt+0x64/0x80 [<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0 [<9000000000349a78>] handle_irq_event_percpu+0x18/0x88 [<9000000000354c00>] handle_percpu_irq+0x90/0xf0 [<9000000000348c74>] handle_irq_desc+0x94/0xb8 [<9000000001012b28>] handle_cpu_irq+0x68/0xa0 [<9000000001def8c0>] handle_loongarch_irq+0x30/0x48 [<9000000001def958>] do_vint+0x80/0xd0 [<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0 [<90000000006344f4>] __asan_load8+0x4c/0x120 [<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8 [<90000000003895f0>] load_module+0x9e0/0x2958 [<900000000038b770>] __do_sys_init_module+0x208/0x2d0 [<9000000001df0c34>] do_syscall+0x94/0x190 [<900000000024d6fc>] handle_syscall+0xbc/0x158 After analysis, this is because the slow speed of loading the amdgpu module leads to the long time occupation of the cpu and then the soft deadlock. When loading a module, module_frob_arch_sections() tries to figure out the number of PLTs/GOTs that will be needed to handle all the RELAs. It will call the count_max_entries() to find in an out-of-order date which counting algorithm has O(n^2) complexity. To make it faster, we sort the relocation list by info and addend. That way, to check for a duplicate relocation, it just needs to compare with the previous entry. This reduces the complexity of the algorithm to O(n log n), as done in commit d4e0340919fb ("arm64/module: Optimize module load time by optimizing PLT counting"). This gives sinificant reduction in module load time for modules with large number of relocations. After applying this patch, the soft deadlock problem has been solved, and the kernel starts normally without "Call Trace". Using the default configuration to test some modules, the results are as follows: Module Size ip_tables 36K fat 143K radeon 2.5MB amdgpu 16MB Without this patch: Module Module load time (ms) Count(PLTs/GOTs) ip_tables 18 59/6 fat 0 162/14 radeon 54 1221/84 amdgpu 1411 4525/1098 With this patch: Module Module load time (ms) Count(PLTs/GOTs) ip_tables 18 59/6 fat 0 162/14 radeon 22 1221/84 amdgpu 45 4525/1098

Show More

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix complex rules rehash error flow Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. Similar to the simple rules, complex rules rehash logic suffers from the same problems. This ... In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix complex rules rehash error flow Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. Similar to the simple rules, complex rules rehash logic suffers from the same problems. This patch fixes the error flow for moving complex rules: - If new rule creation fails before it was even enqeued, do not poll for completion - If TIMEOUT happened while moving the rule, no point trying to poll for completions for other rules. Something is broken, completion won't come, just abort the rehash sequence. - If some other completion with error received, don't give up. Continue handling rest of the rules to minimize the damage. - Make sure that the first error code that was received will be actually returned to the caller instead of replacing it with the generic error code. All the aforementioned issues stem from the same bad error flow, so no point fixing them one by one and leaving partially broken code - fixing them in one patch.

Show More

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix lockdep warning during rmmod The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistere ... In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix lockdep warning during rmmod The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en]

Show More

In the Linux kernel, the following vulnerability has been resolved: regulator: pca9450: Use devm_register_sys_off_handler With module test, there is error dump: ------------[ cut here ]------------ notifier callback pca9450_i2c_restart_handler already registered WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88, CPU#0: kworker/u16:3/50 Call trace: notifier_chain_register+0x5c/0x88 (P) atomic_notifier_chain_register+0x30/0x58 register_restart_handler+0x1c/0x28 p ... In the Linux kernel, the following vulnerability has been resolved: regulator: pca9450: Use devm_register_sys_off_handler With module test, there is error dump: ------------[ cut here ]------------ notifier callback pca9450_i2c_restart_handler already registered WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88, CPU#0: kworker/u16:3/50 Call trace: notifier_chain_register+0x5c/0x88 (P) atomic_notifier_chain_register+0x30/0x58 register_restart_handler+0x1c/0x28 pca9450_i2c_probe+0x418/0x538 i2c_device_probe+0x220/0x3d0 really_probe+0x114/0x410 __driver_probe_device+0xa0/0x150 driver_probe_device+0x40/0x114 __device_attach_driver+0xd4/0x12c So use devm_register_sys_off_handler to let kernel handle the resource free to avoid kernel dump.

Show More

In the Linux kernel, the following vulnerability has been resolved: iio: adc: rzg2l_adc: Set driver data before enabling runtime PM When stress-testing the system by repeatedly unbinding and binding the ADC device in a loop, and the ADC is a supplier for another device (e.g., a thermal hardware block that reads temperature through the ADC), it may happen that the ADC device is runtime-resumed immediately after runtime PM is enabled, triggered by its consumer. At this point, since drvdata is no ... In the Linux kernel, the following vulnerability has been resolved: iio: adc: rzg2l_adc: Set driver data before enabling runtime PM When stress-testing the system by repeatedly unbinding and binding the ADC device in a loop, and the ADC is a supplier for another device (e.g., a thermal hardware block that reads temperature through the ADC), it may happen that the ADC device is runtime-resumed immediately after runtime PM is enabled, triggered by its consumer. At this point, since drvdata is not yet set and the driver's runtime PM callbacks rely on it, a crash can occur. To avoid this, set drvdata just after it was allocated.

Show More

In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix WARN with uffd that has remap events disabled Registering userfaultd on a VMA that spans at least one PMD and then mremap()'ing that VMA can trigger a WARN when recovering from a failed page table move due to a page table allocation error. The code ends up doing the right thing (recurse, avoiding moving actual page tables), but triggering that WARN is unpleasant: WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 mo ... In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix WARN with uffd that has remap events disabled Registering userfaultd on a VMA that spans at least one PMD and then mremap()'ing that VMA can trigger a WARN when recovering from a failed page table move due to a page table allocation error. The code ends up doing the right thing (recurse, avoiding moving actual page tables), but triggering that WARN is unpleasant: WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Modules linked in: CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline] RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline] RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Code: ... RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645 RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007 RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000 FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0 Call Trace: <TASK> copy_vma_and_data+0x468/0x790 mm/mremap.c:1215 move_vma+0x548/0x1780 mm/mremap.c:1282 mremap_to+0x1b7/0x450 mm/mremap.c:1406 do_mremap+0xfad/0x1f80 mm/mremap.c:1921 __do_sys_mremap+0x119/0x170 mm/mremap.c:1977 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f00d0b8ebe9 Code: ... RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019 RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9 RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000 RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002 R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005 </TASK> The underlying issue is that we recurse during the original page table move, but not during the recovery move. Fix it by checking for both VMAs and performing the check before the pmd_none() sanity check. Add a new helper where we perform+document that check for the PMD and PUD level. Thanks to Harry for bisecting.

Show More

Twonky Server 8.5.2 on Linux and Windows is vulnerable to a cryptographic flaw, use of hard-coded cryptographic keys. An attacker with knowledge of the encrypted administrator password can decrypt the value with static keys to view the plain text password and gain administrator-level access to Twonky Server.

In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - Fix CFI failure due to type punning To avoid a crash when control flow integrity is enabled, make the workspace ("stream") free function use a consistent type, and call it through a function pointer that has that same type.

In the Linux kernel, the following vulnerability has been resolved: btrfs: subpage: keep TOWRITE tag until folio is cleaned btrfs_subpage_set_writeback() calls folio_start_writeback() the first time a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag even if there are still dirty blocks in the folio. This can break ordering guarantees, such as those required by btrfs_wait_ordered_extents(). That ordering breakage leads to a real failure. For example, running generic/464 ... In the Linux kernel, the following vulnerability has been resolved: btrfs: subpage: keep TOWRITE tag until folio is cleaned btrfs_subpage_set_writeback() calls folio_start_writeback() the first time a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag even if there are still dirty blocks in the folio. This can break ordering guarantees, such as those required by btrfs_wait_ordered_extents(). That ordering breakage leads to a real failure. For example, running generic/464 on a zoned setup will hit the following ASSERT. This happens because the broken ordering fails to flush existing dirty pages before the file size is truncated. assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899 ------------[ cut here ]------------ kernel BUG at fs/btrfs/zoned.c:1899! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ #554 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs] RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246 RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8 R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00 R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680 FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0 Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f btrfs_finish_ordered_io+0x4a/0x60 [btrfs] btrfs_work_helper+0xf9/0x490 [btrfs] process_one_work+0x204/0x590 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d6/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x118/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x205/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode or for compressed writes, it locks several folios for delalloc and starts writing them out. Let's call the last locked folio folio X. Suppose the write range only partially covers folio X, leaving some pages dirty. Process A calls btrfs_subpage_set_writeback() when building a bio. This function call clears the TOWRITE tag of folio X, whose size = 8K and the block size = 4K. It is following state. 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY) <-----> Process A will write this range. Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. It calls tag_pages_for_writeback() to tag dirty folios with PAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then, B collects tagged folios using filemap_get_folios_tag() and must wait for folio X to be written before returning from writepages(). 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE) However, between tagging and collecting, process A may call btrfs_subpage_set_writeback() and clear folio X's TOWRITE tag. 0 4K 8K | |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY) As a result, process B won't see folio X in its batch, and returns without waiting for it. This breaks the WB_SYNC_ALL ordering requirement. Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retains the TOWRITE tag. We now manually clear the tag only after the folio becomes clean, via the xas operation.

Show More

In the Linux kernel, the following vulnerability has been resolved: sched/ext: Fix invalid task state transitions on class switch When enabling a sched_ext scheduler, we may trigger invalid task state transitions, resulting in warnings like the following (which can be easily reproduced by running the hotplug selftest in a loop): sched_ext: Invalid task state transition 0 -> 3 for fish[770] WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0 ... RIP: 0010:scx_ ... In the Linux kernel, the following vulnerability has been resolved: sched/ext: Fix invalid task state transitions on class switch When enabling a sched_ext scheduler, we may trigger invalid task state transitions, resulting in warnings like the following (which can be easily reproduced by running the hotplug selftest in a loop): sched_ext: Invalid task state transition 0 -> 3 for fish[770] WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0 ... RIP: 0010:scx_set_task_state+0x7c/0xc0 ... Call Trace: <TASK> scx_enable_task+0x11f/0x2e0 switching_to_scx+0x24/0x110 scx_enable.isra.0+0xd14/0x13d0 bpf_struct_ops_link_create+0x136/0x1a0 __sys_bpf+0x1edd/0x2c30 __x64_sys_bpf+0x21/0x30 do_syscall_64+0xbb/0x370 entry_SYSCALL_64_after_hwframe+0x77/0x7f This happens because we skip initialization for tasks that are already dead (with their usage counter set to zero), but we don't exclude them during the scheduling class transition phase. Fix this by also skipping dead tasks during class swiching, preventing invalid task state transitions.

Show More

In the Linux kernel, the following vulnerability has been resolved: parisc: Drop WARN_ON_ONCE() from flush_cache_vmap I have observed warning to occassionally trigger.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix link speed calculation on retrain failure When pcie_failed_link_retrain() fails to retrain, it tries to revert to the previous link speed. However it calculates that speed from the Link Control 2 register without masking out non-speed bits first. PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in pcie_set_target_speed(): pci 0000:00:01.1: [102 ... In the Linux kernel, the following vulnerability has been resolved: PCI: Fix link speed calculation on retrain failure When pcie_failed_link_retrain() fails to retrain, it tries to revert to the previous link speed. However it calculates that speed from the Link Control 2 register without masking out non-speed bits first. PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in pcie_set_target_speed(): pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s pci 0000:00:01.1: retraining failed WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000 pcie_failed_link_retrain pci_device_add pci_scan_single_device Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN. [bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de]

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/hisilicon/hibmc: fix irq_request()'s irq name variable is local The local variable is passed in request_irq (), and there will be use after free problem, which will make request_irq failed. Using the global irq name instead of it to fix.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7173: fix channels index for syscalib_mode Fix the index used to look up the channel when accessing the syscalib_mode attribute. The address field is a 0-based index (same as scan_index) that it used to access the channel in the ad7173_channels array throughout the driver. The channels field, on the other hand, may not match the address field depending on the channel configuration specified in the device tree and c ... In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7173: fix channels index for syscalib_mode Fix the index used to look up the channel when accessing the syscalib_mode attribute. The address field is a 0-based index (same as scan_index) that it used to access the channel in the ad7173_channels array throughout the driver. The channels field, on the other hand, may not match the address field depending on the channel configuration specified in the device tree and could result in an out-of-bounds access.

Show More

In the Linux kernel, the following vulnerability has been resolved: crypto: x86/aegis - Add missing error checks The skcipher_walk functions can allocate memory and can fail, so checking for errors is necessary.

In the Linux kernel, the following vulnerability has been resolved: dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targe ... In the Linux kernel, the following vulnerability has been resolved: dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices.

Show More

In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would ... In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the internal max_write_size limit (which will be suppressed in a different patch). However, since crypt_alloc_buffer() uses a bioset allowing only up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS (128), must thus be respected and write BIOs split accordingly. In the case of dm-flakey, since zone append emulation is not required, the block layer zone write plugging is not used and no splitting of BIOs required. Modify the function dm_zone_bio_needs_split() to use the block layer helper function bio_needs_zone_write_plugging() to force a call to bio_split_to_limits() in dm_split_and_process_bio(). This allows DM target drivers to avoid using dm_accept_partial_bio() for write operations on zoned DM devices.

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: shutdown driver when hardware is unreliable In rare cases, ath10k may lose connection with the PCIe bus due to some unknown reasons, which could further lead to system crashes during resuming due to watchdog timeout: ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware ath10k_pci 0000:01:00.0: already restarting ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11 ath10k_pci 0000:01:00.0: f ... In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: shutdown driver when hardware is unreliable In rare cases, ath10k may lose connection with the PCIe bus due to some unknown reasons, which could further lead to system crashes during resuming due to watchdog timeout: ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware ath10k_pci 0000:01:00.0: already restarting ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11 ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11 ieee80211 phy0: PM: **** DPM device timeout **** Call Trace: panic+0x125/0x315 dpm_watchdog_set+0x54/0x54 dpm_watchdog_handler+0x57/0x57 call_timer_fn+0x31/0x13c At this point, all WMI commands will timeout and attempt to restart device. So set a threshold for consecutive restart failures. If the threshold is exceeded, consider the hardware is unreliable and all ath10k operations should be skipped to avoid system crash. fail_cont_count and pending_recovery are atomic variables, and do not involve complex conditional logic. Therefore, even if recovery check and reconfig complete are executed concurrently, the recovery mechanism will not be broken. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Add error handling for krealloc in metadata setup Function msm_ioctl_gem_info_set_metadata() now checks for krealloc failure and returns -ENOMEM, avoiding potential NULL pointer dereference. Explicitly avoids __GFP_NOFAIL due to deadlock risks and allocation constraints. Patchwork: https://patchwork.freedesktop.org/patch/661235/

In the Linux kernel, the following vulnerability has been resolved: s390/ism: fix concurrency management in ism_cmd() The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions e ... In the Linux kernel, the following vulnerability has been resolved: s390/ism: fix concurrency management in ism_cmd() The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions end up entering error state (with PEC 2 as seen from the logs) after a while and as a consequence connections handled by the respective function break, and for future connection requests the ISM device is not considered -- given it is in a dysfunctional state. During further debugging PEC 3A was observed as well. A kernel message like [ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a is a reliable indicator of the stated function entering error state with PEC 2. Let me also point out that a kernel message like [ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery is a reliable indicator that the ISM function won't be auto-recovered because the ISM driver currently lacks support for it. On a technical level, without this synchronization, commands (inputs to the FW) may be partially or fully overwritten (corrupted) by another CPU trying to issue commands on the same function. There is hard evidence that this can lead to DMB token values being used as DMB IOVAs, leading to PEC 2 PCI events indicating invalid DMA. But this is only one of the failure modes imaginable. In theory even completely losing one command and executing another one twice and then trying to interpret the outputs as if the command we intended to execute was actually executed and not the other one is also possible. Frankly, I don't feel confident about providing an exhaustive list of possible consequences.

Show More

In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix potential buffer overflow in setup_clusters() In setup_swap_map(), we only ensure badpages are in range (0, last_page]. As maxpages might be < last_page, setup_clusters() will encounter a buffer overflow when a badpage is >= maxpages. Only call inc_cluster_info_page() for badpage which is < maxpages to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix dereferencing uninitialized error pointer Fix below smatch warnings: drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked() error: we previously assumed 'error' could be null

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask() ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to ieee80211_iterate_stations_atomic(). Note in this case the iterator is required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does not follow it as it might sleep. Consequently below warning is seen: BUG: sleeping function called from invalid context at wmi.c:304 Call Trace: ... In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask() ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to ieee80211_iterate_stations_atomic(). Note in this case the iterator is required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does not follow it as it might sleep. Consequently below warning is seen: BUG: sleeping function called from invalid context at wmi.c:304 Call Trace: <TASK> dump_stack_lvl __might_resched.cold ath11k_wmi_cmd_send ath11k_wmi_set_peer_param ath11k_mac_disable_peer_fixed_rate ieee80211_iterate_stations_atomic ath11k_mac_op_set_bitrate_mask.cold Change to ieee80211_iterate_stations_mtx() to fix this issue. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Show More

In the Linux kernel, the following vulnerability has been resolved: team: replace team lock with rtnl lock syszbot reports various ordering issues for lower instance locks and team lock. Switch to using rtnl lock for protecting team device, similar to bonding. Based on the patch by Tetsuo Handa.

Use-after-free vulnerability in the AppendElements function in Mozilla Firefox before 37.0, Firefox ESR 31.x before 31.6, and Thunderbird before 31.6 on Linux, when the Fluendo MP3 plugin for GStreamer is used, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted MP3 file.

The bufferdata function in WebGL is vulnerable to a buffer overflow with specific graphics drivers on Linux. This could result in malicious content freezing a tab or triggering a potentially exploitable crash. *Note: this issue only occurs on Linux. Other operating systems are unaffected.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Add the SM6115 MDSS compatible to clients compatible list, as it also needs that workaround. Without this workaround, for example, QRB4210 RB2 which is based on SM4250/SM6115 generates a lot of smmu unhandled context faults during boot: arm_smmu_context_fault: 116854 callbacks suppressed arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0ec600, fsynr=0x320021, ... In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Add the SM6115 MDSS compatible to clients compatible list, as it also needs that workaround. Without this workaround, for example, QRB4210 RB2 which is based on SM4250/SM6115 generates a lot of smmu unhandled context faults during boot: arm_smmu_context_fault: 116854 callbacks suppressed arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1] arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 and also failed initialisation of lontium lt9611uxc, gpu and dpu is observed: (binding MDSS components triggered by lt9611uxc have failed) ------------[ cut here ]------------ !aspace WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm] Modules linked in: ... (long list of modules) CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_vma_init+0x150/0x18c [msm] lr : msm_gem_vma_init+0x150/0x18c [msm] sp : ffff80008144b280 ... Call trace: msm_gem_vma_init+0x150/0x18c [msm] (P) get_vma_locked+0xc0/0x194 [msm] msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm] msm_gem_kernel_new+0x48/0x160 [msm] msm_gpu_init+0x34c/0x53c [msm] adreno_gpu_init+0x1b0/0x2d8 [msm] a6xx_gpu_init+0x1e8/0x9e0 [msm] adreno_bind+0x2b8/0x348 [msm] component_bind_all+0x100/0x230 msm_drm_bind+0x13c/0x3d0 [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x174 component_add+0x14/0x20 dsi_dev_attach+0x20/0x34 [msm] dsi_host_attach+0x58/0x98 [msm] devm_mipi_dsi_attach+0x34/0x90 lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc] lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc] i2c_device_probe+0x148/0x2a8 really_probe+0xbc/0x2c0 __driver_probe_device+0x78/0x120 driver_probe_device+0x3c/0x154 __driver_attach+0x90/0x1a0 bus_for_each_dev+0x68/0xb8 driver_attach+0x24/0x30 bus_add_driver+0xe4/0x208 driver_register+0x68/0x124 i2c_register_driver+0x48/0xcc lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc] do_one_initcall+0x60/0x1d4 do_init_module+0x54/0x1fc load_module+0x1748/0x1c8c init_module_from_file+0x74/0xa0 __arm64_sys_finit_module+0x130/0x2f8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x2c/0x80 el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22 msm_dpu 5e01000.display-controller: failed to load adreno gpu platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22 msm_dpu 5e01000.display-controller: adev bind failed: -22 lt9611uxc 0-002b: failed to attach dsi to host lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22

Show More

In the Linux kernel, the following vulnerability has been resolved: open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE As described in commit 7a54947e727b ('Merge patch series "fs: allow changing idmappings"'), open_tree_attr(2) was necessary in order to allow for a detached mount to be created and have its idmappings changed without the risk of any racing threads operating on it. For this reason, mount_setattr(2) still does not allow for id-mappings to be changed. Howeve ... In the Linux kernel, the following vulnerability has been resolved: open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE As described in commit 7a54947e727b ('Merge patch series "fs: allow changing idmappings"'), open_tree_attr(2) was necessary in order to allow for a detached mount to be created and have its idmappings changed without the risk of any racing threads operating on it. For this reason, mount_setattr(2) still does not allow for id-mappings to be changed. However, there was a bug in commit 2462651ffa76 ("fs: allow changing idmappings") which allowed users to bypass this restriction by calling open_tree_attr(2) *without* OPEN_TREE_CLONE. can_idmap_mount() prevented this bug from allowing an attached mountpoint's id-mapping from being modified (thanks to an is_anon_ns() check), but this still allows for detached (but visible) mounts to have their be id-mapping changed. This risks the same UAF and locking issues as described in the merge commit, and was likely unintentional.

Show More

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix refcount leak causing resource not released When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not decremented properly, causing a refcount leak that prevents the count from reaching zero and the memory from being released.

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Prevent crash on suspend with iMX8QM / iMX8ULP Since the CAAM on these SoCs is managed by another ARM core, called the SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which also reserves access to register page 0 suspend operations cannot touch this page. This is similar to when running OPTEE, where OPTEE will reserve page 0. Track this situation using a new state variable no_page0, reflect ... In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Prevent crash on suspend with iMX8QM / iMX8ULP Since the CAAM on these SoCs is managed by another ARM core, called the SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which also reserves access to register page 0 suspend operations cannot touch this page. This is similar to when running OPTEE, where OPTEE will reserve page 0. Track this situation using a new state variable no_page0, reflecting if page 0 is reserved elsewhere, either by other management cores in SoC or by OPTEE. Replace the optee_en check in suspend/resume with the new check. optee_en cannot go away as it's needed elsewhere to gate OPTEE specific situations. Fixes the following splat at suspend: Internal error: synchronous external abort: 0000000096000010 [#1] SMP Hardware name: Freescale i.MX8QXP ACU6C (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : readl+0x0/0x18 lr : rd_reg32+0x18/0x3c sp : ffffffc08192ba20 x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000 x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090 x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010 x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5 x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001 x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000 x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002 x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000 x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004 Call trace: readl+0x0/0x18 caam_ctrl_suspend+0x30/0xdc dpm_run_callback.constprop.0+0x24/0x5c device_suspend+0x170/0x2e8 dpm_suspend+0xa0/0x104 dpm_suspend_start+0x48/0x50 suspend_devices_and_enter+0x7c/0x45c pm_suspend+0x148/0x160 state_store+0xb4/0xf8 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x38/0x48 kernfs_fop_write_iter+0xb4/0x178 vfs_write+0x118/0x178 ksys_write+0x6c/0xd0 __arm64_sys_write+0x14/0x1c invoke_syscall.constprop.0+0x64/0xb0 do_el0_svc+0x90/0xb0 el0_svc+0x18/0x44 el0t_64_sync_handler+0x88/0x124 el0t_64_sync+0x150/0x154 Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000)

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix incorrect mpc_combine array size [why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix password opcode ordering for workstations The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: don't override retval if we already lost the skb If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF. Move the retval override to the error path which actually need it.