Vulnerabilities (CVE)

The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) a ... The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution.

Show More

ProSAFE Plus Configuration Utility prior to 2.3.29 allows remote attackers to bypass access restriction and change configurations of the switch via SOAP requests.

The NETGEAR WNR2000v5 router leaks its serial number when performing a request to the /BRS_netgear_success.html URI. This serial number allows a user to obtain the administrator username and password, when used in combination with the CVE-2016-10176 vulnerability that allows resetting the answers to the password-recovery questions.

Information disclosure in Netgear WN604 before 3.3.3; WNAP210, WNAP320, WNDAP350, and WNDAP360 before 3.5.5.0; and WND930 before 2.0.11 allows remote attackers to read the wireless WPS PIN or passphrase by visiting unauthenticated webpages.

The default console presented to users over telnet (when enabled) is restricted to a subset of commands. Commands issued at this console, however, appear to be fed directly into a system call or other similar function. This allows any authenticated user to execute arbitrary commands on the device.

A support user exists on the device and appears to be a backdoor for Technical Support staff. The default password for this account is “support” and cannot be changed by a user via any normally accessible means.

The “puhttpsniff” service, which runs by default, is susceptible to command injection due to improperly sanitized user input. An unauthenticated attacker on the same network segment as the router can execute arbitrary commands on the device without authentication.

An exploitable firmware modification vulnerability was discovered on the Netgear WNR2000v1 router. An attacker can conduct a MITM (Man-in-the-Middle) attack to modify the user-uploaded firmware image and bypass the CRC check, allowing attackers to execute arbitrary code or cause a Denial of Service (DoS). This affects v1.2.3.7 and earlier.

An issue in Netgear WNR2000 v1 1.2.3.7 and earlier allows authenticated attackers to cause a Denial of Service (DoS) via uploading a crafted firmware image during the firmware update process.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter wan_hostname and forcing a reboot. This will result in command injection.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.

In Netgear WNR854T 1.5.2 (North America), the UPNP service is vulnerable to command injection in the function addmap_exec which parses the NewInternalClient parameter of the AddPortMapping SOAPAction into a system call without sanitation. An attacker can send a specially crafted SOAPAction request for AddPortMapping via the router's WANIPConn1 service to achieve arbitrary command execution.

Netgear WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the SetDefaultConnectionService function due to an unconstrained use of sscanf. The vulnerability allows for control of the program counter and can be utilized to achieve arbitrary code execution.

Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands.

An exploitable firmware modification vulnerability was discovered on the Netgear XWN5001 Powerline 500 WiFi Access Point. An attacker can conduct a MITM (Man-in-the-Middle) attack to modify the user-uploaded firmware image and bypass the CRC check, allowing attackers to execute arbitrary code or cause a Denial of Service (DoS). This affects v0.4.1.1 and earlier.

A network misconfiguration is present in versions prior to 1.0.9.90 of the NETGEAR RAX30 AX2400 series of routers. IPv6 is enabled for the WAN interface by default on these devices. While there are firewall restrictions in place that define access restrictions for IPv4 traffic, these restrictions do not appear to be applied to the WAN interface for IPv6. This allows arbitrary access to any services running on the device that may be inadvertently listening via IPv6, such as the SSH and Telnet ser ... A network misconfiguration is present in versions prior to 1.0.9.90 of the NETGEAR RAX30 AX2400 series of routers. IPv6 is enabled for the WAN interface by default on these devices. While there are firewall restrictions in place that define access restrictions for IPv4 traffic, these restrictions do not appear to be applied to the WAN interface for IPv6. This allows arbitrary access to any services running on the device that may be inadvertently listening via IPv6, such as the SSH and Telnet servers spawned on ports 22 and 23 by default. This misconfiguration could allow an attacker to interact with services only intended to be accessible by clients on the local network.

Show More

NETGEAR WNR1000v3 devices with firmware 1.0.2.68 use the same source port number for every DNS query, which makes it easier for remote attackers to spoof responses by selecting that number for the destination port.

The password-recovery feature on NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier allows remote attackers to discover the cleartext administrator password by reading the cgi-bin/passrec.asp HTML source code.

NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 have a hardcoded qwe23622260 password for the nuuoeng account, which allows remote attackers to obtain sensitive information via an __nvr_status___.php request.

The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410.

NETGEAR GS108PE Prosafe Plus switches with firmware 1.2.0.5 have a hardcoded password of debugpassword for the ntgruser account, which allows remote attackers to upload firmware or read or modify memory contents, and consequently execute arbitrary code, via a request to (1) produce_burn.cgi, (2) register_debug.cgi, or (3) bootcode_update.cgi.

Cisco NX-OS 4.0 through 6.1 on Nexus 1000V 3000, 4000, 5000, 6000, and 7000 devices and Unified Computing System (UCS) platforms allows remote attackers to cause a denial of service (TCP stack reload) by sending crafted TCP packets to a device that has a TIME_WAIT TCP session, aka Bug ID CSCub70579.

Cisco TelePresence Server 3.1 on 7010, Mobility Services Engine (MSE) 8710, Multiparty Media 310 and 320, and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (device reload) via malformed STUN packets, aka Bug ID CSCuv01348.

Directory traversal vulnerability in data/config/image.do in NETGEAR Management System NMS300 1.5.0.11 and earlier allows remote authenticated users to read arbitrary files via a .. (dot dot) in the realName parameter.

Buffer overflow in ACME micro_httpd, as used in D-Link DSL2750U and DSL2740U and NetGear WGR614 and MR-ADSL-DG834 routers allows remote attackers to cause a denial of service (crash) via a long string in the URI in a GET request.

NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier use the same hardcoded private key across different customers' installations, which allows remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

Multiple unrestricted file upload vulnerabilities in NETGEAR Management System NMS300 1.5.0.11 and earlier allow remote attackers to execute arbitrary Java code by using (1) fileUpload.do or (2) lib-1.0/external/flash/fileUpload.do to upload a JSP file, and then accessing it via a direct request for a /null URI.

NETGEAR Arlo base stations with firmware 1.7.5_6178 and earlier, Arlo Q devices with firmware 1.8.0_5551 and earlier, and Arlo Q Plus devices with firmware 1.8.1_6094 and earlier have a default password of 12345678, which makes it easier for remote attackers to obtain access after a factory reset or in a factory configuration.

__debugging_center_utils___.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.7.5 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the log parameter.

cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command.

NETGEAR Arlo base stations with firmware 1.7.5_6178 and earlier, Arlo Q devices with firmware 1.8.0_5551 and earlier, and Arlo Q Plus devices with firmware 1.8.1_6094 and earlier use a pattern of adjective, noun, and three-digit number for the customized password, which makes it easier for remote attackers to obtain access via a dictionary attack.

The IKEv2 implementation in Cisco IOS 15.0 through 15.6 and IOS XE 3.3 through 3.17 allows remote attackers to cause a denial of service (device reload) via fragmented packets, aka Bug ID CSCux38417.

handle_daylightsaving.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, NUUO Crystal 2.2.1 through 3.2.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the NTPServer parameter.

Cisco IOS 15.0 through 15.5 and IOS XE 3.3 through 3.16 allow remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 Relay message, aka Bug ID CSCus55821.

Stack-based buffer overflow in cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary code via the sn parameter to the transfer_license command.

cgi-bin/cgi_system in NUUO NVRmini 2 1.7.5 through 2.x, NUUO NVRsolo 1.7.5 through 2.x, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to reset the administrator password via a cmd=loaddefconfig action.

The kernel in Cisco TelePresence Server 3.0 through 4.2(4.18) on Mobility Services Engine (MSE) 8710 devices allows remote attackers to cause a denial of service (panic and reboot) via a crafted sequence of IPv6 packets, aka Bug ID CSCuu46673.

Multiple cross-site scripting (XSS) vulnerabilities in NETGEAR WNDR4700 with firmware 1.0.0.34 allow remote authenticated users to inject arbitrary web script or HTML via the (1) UserName or (2) Password to the NAS User Setup page, (3) deviceName to USB_advanced.htm, or (4) Network Key to the Wireless Setup page.

Directory traversal vulnerability in scgi-bin/platform.cgi on NETGEAR FVS336Gv3, FVS318N, FVS318Gv2, and SRX5308 devices with firmware before 4.3.3-8 allows remote authenticated users to read arbitrary files via a .. (dot dot) in the thispage parameter, as demonstrated by reading the /etc/shadow file.