Vulnerabilities (CVE)

IBM Cloud Automation Manager 3.2.1.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 168644.

IBM MQ and IBM MQ Appliance 8.0 and 9.0 LTS client connecting to a Queue Manager could cause a SIGSEGV denial of service caused by converting an invalid message. IBM X-Force ID: 168639.

IBM DB2 High Performance Unload load for LUW 6.1 and 6.5 could allow a local attacker to execute arbitrary code on the system, caused by an untrusted search path vulnerability. By using a executable file, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 168298.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-ForceID: 167810.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 generates an error message that includes sensitive information that could be used in further attacks against the system. IBM X-ForceID: 167743.

IBM QRadar Network Packet Capture 7.3.0 - 7.3.3 Patch 1 and 7.4.0 GA does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166803.

IBM MQ and IBM MQ Appliance 8.0 and 9.0 LTS could allow a remote attacker with intimate knowledge of the server to cause a denial of service when receiving data on the channel. IBM X-Force ID: 166629.

IBM QRadar SIEM 7.3 and 7.4 when configured to use Active Directory Authentication may be susceptible to spoofing attacks. IBM X-Force ID: 165877.

IBM DB2 High Performance Unload load for LUW 6.1 and 6.5 is vulnerable to a buffer overflow, caused by improper bounds checking which could allow a local attacker to execute arbitrary code on the system with root privileges. IBM X-Force ID: 165481.

IBM DB2 High Performance Unload load for LUW 6.1, 6.1.0.1, 6.1.0.1 IF1, 6.1.0.2, 6.1.0.2 IF1, and 6.1.0.1 IF2 db2hpum and db2hpum_debug binaries are setuid root and have built-in options that allow an low privileged user the ability to load arbitrary db2 libraries from a privileged context. This results in arbitrary code being executed with root authority. IBM X-Force ID: 163489.

IBM DB2 High Performance Unload load for LUW 6.1, 6.1.0.1, 6.1.0.1 IF1, 6.1.0.2, 6.1.0.2 IF1, and 6.1.0.1 IF2 db2hpum_debug is a setuid root binary which trusts the PATH environment variable. A low privileged user can execute arbitrary commands as root by altering the PATH variable to point to a user controlled location. When a crash is induced the trojan gdb command is executed. IBM X-Force ID: 163488.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.1 could allow an authenticated user to execute a function that would cause the server to crash. IBM X-Force ID: 162714.

IBM Sterling B2B Integrator 6.0.0.0 and 6.0.0.1 reveals sensitive information from a stack trace that could be used in further attacks against the system. IBM X-Force ID: 162803.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 161202.

IBM Jazz for Service Management 1.1.3 and 1.1.3.2 stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-force ID: 159032.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 158519.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 158092.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 10.1, 10.5, and 11.1 is vulnerable to a denial of service. Users that have both EXECUTE on PD_GET_DIAG_HIST and access to the diagnostic directory on the DB2 server can cause the instance to crash. IBM X-Force ID: 158091.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 binaries load shared libraries from an untrusted path potentially giving low privilege user full access to root by loading a malicious shared library. IBM X-Force ID: 158014.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow malicious user with access to the DB2 instance account to leverage a fenced execution process to execute arbitrary code as root. IBM X-Force ID: 156567.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-ForceID: 155894.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-ForceID: 155893.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 155892.

A race condition in perf_event_open() allows local attackers to leak sensitive data from setuid programs. As no relevant locks (in particular the cred_guard_mutex) are held during the ptrace_may_access() call, it is possible for the specified target task to perform an execve() syscall with setuid execution before perf_event_alloc() actually attaches to it, allowing an attacker to bypass the ptrace_may_access() check and the perf_event_exit_task(current) call that is performed in install_exec_cre ... A race condition in perf_event_open() allows local attackers to leak sensitive data from setuid programs. As no relevant locks (in particular the cred_guard_mutex) are held during the ptrace_may_access() call, it is possible for the specified target task to perform an execve() syscall with setuid execution before perf_event_alloc() actually attaches to it, allowing an attacker to bypass the ptrace_may_access() check and the perf_event_exit_task(current) call that is performed in install_exec_creds() during privileged execve() calls. This issue affects kernel versions before 4.8.

Show More

An infinite loop issue was found in the vhost_net kernel module in Linux Kernel up to and including v5.1-rc6, while handling incoming packets in handle_rx(). It could occur if one end sends packets faster than the other end can process them. A guest user, maybe remote one, could use this flaw to stall the vhost_net kernel thread, resulting in a DoS scenario.

A double-free can happen in idr_remove_all() in lib/idr.c in the Linux kernel 2.6 branch. An unprivileged local attacker can use this flaw for a privilege escalation or for a system crash and a denial of service (DoS).

A flaw was found in the way KVM hypervisor handled x2APIC Machine Specific Rregister (MSR) access with nested(=1) virtualization enabled. In that, L1 guest could access L0's APIC register values via L2 guest, when 'virtualize x2APIC mode' is enabled. A guest could use this flaw to potentially crash the host kernel resulting in DoS issue. Kernel versions from 4.16 and newer are vulnerable to this issue.

A flaw was found in the Linux kernel's vfio interface implementation that permits violation of the user's locked memory limit. If a device is bound to a vfio driver, such as vfio-pci, and the local attacker is administratively granted ownership of the device, it may cause a system memory exhaustion and thus a denial of service (DoS). Versions 3.10, 4.14 and 4.18 are vulnerable.

The SCTP socket buffer used by a userspace application is not accounted by the cgroups subsystem. An attacker can use this flaw to cause a denial of service attack. Kernel 3.10.x and 4.18.x branches are believed to be vulnerable.

A flaw that allowed an attacker to corrupt memory and possibly escalate privileges was found in the mwifiex kernel module while connecting to a malicious wireless network.

It was found that the net_dma code in tcp_recvmsg() in the 2.6.32 kernel as shipped in RHEL6 is thread-unsafe. So an unprivileged multi-threaded userspace application calling recvmsg() for the same network socket in parallel executed on ioatdma-enabled hardware with net_dma enabled can leak the memory, crash the host leading to a denial-of-service or cause a random memory corruption.

A flaw was found in the Linux kernel in the function hid_debug_events_read() in drivers/hid/hid-debug.c file which may enter an infinite loop with certain parameters passed from a userspace. A local privileged user ("root") can cause a system lock up and a denial of service. Versions from v4.18 and newer are vulnerable.

An issue was discovered in can_can_gw_rcv in net/can/gw.c in the Linux kernel through 4.19.13. The CAN frame modification rules allow bitwise logical operations that can be also applied to the can_dlc field. The privileged user "root" with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e. ... An issue was discovered in can_can_gw_rcv in net/can/gw.c in the Linux kernel through 4.19.13. The CAN frame modification rules allow bitwise logical operations that can be also applied to the can_dlc field. The privileged user "root" with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Because of a missing check, the CAN drivers may write arbitrary content beyond the data registers in the CAN controller's I/O memory when processing can-gw manipulated outgoing frames.

Show More

A heap data infoleak in multiple locations including L2CAP_PARSE_CONF_RSP was found in the Linux kernel before 5.1-rc1.

A heap address information leak while using L2CAP_GET_CONF_OPT was discovered in the Linux kernel before 5.1-rc1.

In a Linux KVM guest that has PV TLB enabled, a process in the guest kernel may be able to read memory locations from another process in the same guest. This problem is limit to the host running linux kernel 4.10 with a guest running linux kernel 4.16 or later. The problem mainly affects AMD processors but Intel CPUs cannot be ruled out.

In the Linux kernel, the following vulnerability has been resolved: i2c: Fix a potential use after free Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. [wsa: added comment to the code, added Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: netlabel: fix out-of-bounds memory accesses There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before ... In the Linux kernel, the following vulnerability has been resolved: netlabel: fix out-of-bounds memory accesses There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8.

Show More

LibreSSL 2.9.1 through 3.2.1 has an out-of-bounds read in asn1_item_print_ctx (called from asn1_template_print_ctx).

LibreSSL 2.9.1 through 3.2.1 has a heap-based buffer over-read in do_print_ex (called from asn1_item_print_ctx and ASN1_item_print).