Vulnerabilities (CVE)

Buffer overflow in host command allows a remote attacker to execute arbitrary commands via a long response to an AXFR query.

The DNS resolver in unspecified versions of Infoblox DNS One, when resolving recursive DNS queries for arbitrary hosts, allows remote attackers to conduct DNS cache poisoning via a birthday attack that uses a large number of open queries for the same resource record (RR) combined with spoofed responses, which increases the possibility of successfully spoofing a response in a way that is more efficient than brute force methods.

The DNS resolver in unspecified versions of Fujitsu UXP/V, when resolving recursive DNS queries for arbitrary hosts, allows remote attackers to conduct DNS cache poisoning via a birthday attack that uses a large number of open queries for the same resource record (RR) combined with spoofed responses, which increases the possibility of successfully spoofing a response in a way that is more efficient than brute force methods.

DNS cache poisoning via BIND, by predictable query IDs.

dnskeygen in BIND 8.2.4 and earlier, and dnssec-keygen in BIND 9.1.2 and earlier, set insecure permissions for a HMAC-MD5 shared secret key file used for DNS Transactional Signatures (TSIG), which allows attackers to obtain the keys and perform dynamic DNS updates.

BIND before 9.2.6-P1 and 9.3.x before 9.3.2-P1 allows remote attackers to cause a denial of service (crash) via certain SIG queries, which cause an assertion failure when multiple RRsets are returned.

BIND 8.3.x through 8.3.3 allows remote attackers to cause a denial of service (termination due to assertion failure) via a request for a subdomain that does not exist, with an OPT resource record with a large UDP payload size.

named in BIND 8.2 through 8.2.2-P6 allows remote attackers to cause a denial of service by making a compressed zone transfer (ZXFR) request and performing a name service query on an authoritative record that is not cached, aka the "zxfr bug."

BIND 4 and BIND 8 allow remote attackers to access sensitive information such as environment variables.

Denial of service in BIND named via consuming more than "fdmax" file descriptors.

Buffer overflow in DNS resolver functions that perform lookup of network names and addresses, as used in BIND 4.9.8 and ported to glibc 2.2.5 and earlier, allows remote malicious DNS servers to execute arbitrary code through a subroutine used by functions such as getnetbyname and getnetbyaddr.

named in BIND 8.2 through 8.2.2-P6 allows remote attackers to cause a denial of service by sending an SRV record to the server, aka the "srv bug."

Denial of service in BIND named via maxdname.

When compiled with the -DALLOW_UPDATES option, bind allows dynamic updates to the DNS server, allowing for malicious modification of DNS records.

Buffer overflow in BIND 8.2 via NXT records.

BIND 8.x through 8.3.3 allows remote attackers to cause a denial of service (crash) via SIG RR elements with invalid expiry times, which are removed from the internal BIND database and later cause a null dereference.

BIND 4 (BIND4) and BIND 8 (BIND8), if used as a target forwarder, allows remote attackers to gain privileged access via a "Kashpureff-style DNS cache corruption" attack.

An "incorrect assumption" in the authvalidated validator function in BIND 9.3.0, when DNSSEC is enabled, allows remote attackers to cause a denial of service (named server exit) via crafted DNS packets that cause an internal consistency test (self-check) to fail.

Denial of service in BIND by improperly closing TCP sessions via so_linger.

named in ISC BIND 4.9 and 8.1 allows local users to destroy files via a symlink attack on (1) named_dump.db when root kills the process with a SIGINT, or (2) named.stats when SIGIOT is used.

The default configuration of ISC BIND before 9.4.1-P1, when configured as a caching name server, allows recursive queries and provides additional delegation information to arbitrary IP addresses, which allows remote attackers to cause a denial of service (traffic amplification) via DNS queries with spoofed source IP addresses.

BIND 4 and BIND 8, when resolving recursive DNS queries for arbitrary hosts, allows remote attackers to conduct DNS cache poisoning via a birthday attack that uses a large number of open queries for the same resource record (RR) combined with spoofed responses, which increases the possibility of successfully spoofing a response in a way that is more efficient than brute force methods.

Buffer overflow in nslookupComplain function in BIND 4 allows remote attackers to gain root privileges.

Inverse query buffer overflow in BIND 4.9 and BIND 8 Releases.

Buffer overflow in the DNS resolver code used in libc, glibc, and libbind, as derived from ISC BIND, allows remote malicious DNS servers to cause a denial of service and possibly execute arbitrary code via the stub resolvers.

Buffer overflow in transaction signature (TSIG) handling code in BIND 8 allows remote attackers to gain root privileges.

Denial of Service vulnerability in BIND 8 Releases via maliciously formatted DNS messages.

The resolver in glibc 2.1.3 uses predictable IDs, which allows a local attacker to spoof DNS query results.

ISC BIND 8.3.x before 8.3.7, and 8.4.x before 8.4.3, allows remote attackers to poison the cache via a malicious name server that returns negative responses with a large TTL (time-to-live) value.

Buffer overflow in named in BIND 4 versions 4.9.10 and earlier, and 8 versions 8.3.3 and earlier, allows remote attackers to execute arbitrary code via a certain DNS server response containing SIG resource records (RR).

BIND 9 resolver can crash when stale cache and stale answers are enabled, option `stale-answer-client-timeout` is set to a positive integer, and the resolver receives an RRSIG query. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.

Processing of repeated responses to the same query, where both responses contain ECS pseudo-options, but where the first is broken in some way, can cause BIND to exit with an assertion failure. 'Broken' in this context is anything that would cause the resolver to reject the query response, such as a mismatch between query and answer name. This issue affects BIND 9 versions 9.11.4-S1 through 9.11.37-S1 and 9.16.8-S1 through 9.16.36-S1.

Sending a flood of dynamic DNS updates may cause `named` to allocate large amounts of memory. This, in turn, may cause `named` to exit due to a lack of free memory. We are not aware of any cases where this has been exploited. Memory is allocated prior to the checking of access permissions (ACLs) and is retained during the processing of a dynamic update from a client whose access credentials are accepted. Memory allocated to clients that are not permitted to send updates is released immediately ... Sending a flood of dynamic DNS updates may cause `named` to allocate large amounts of memory. This, in turn, may cause `named` to exit due to a lack of free memory. We are not aware of any cases where this has been exploited. Memory is allocated prior to the checking of access permissions (ACLs) and is retained during the processing of a dynamic update from a client whose access credentials are accepted. Memory allocated to clients that are not permitted to send updates is released immediately upon rejection. The scope of this vulnerability is limited therefore to trusted clients who are permitted to make dynamic zone changes. If a dynamic update is REFUSED, memory will be released again very quickly. Therefore it is only likely to be possible to degrade or stop `named` by sending a flood of unaccepted dynamic updates comparable in magnitude to a query flood intended to achieve the same detrimental outcome. BIND 9.11 and earlier branches are also affected, but through exhaustion of internal resources rather than memory constraints. This may reduce performance but should not be a significant problem for most servers. Therefore we don't intend to address this for BIND versions prior to BIND 9.16. This issue affects BIND 9 versions 9.16.0 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.8-S1 through 9.16.36-S1.

Show More

This issue can affect BIND 9 resolvers with `stale-answer-enable yes;` that also make use of the option `stale-answer-client-timeout`, configured with a value greater than zero. If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see ... This issue can affect BIND 9 resolvers with `stale-answer-enable yes;` that also make use of the option `stale-answer-client-timeout`, configured with a value greater than zero. If the resolver receives many queries that require recursion, there will be a corresponding increase in the number of clients that are waiting for recursion to complete. If there are sufficient clients already waiting when a new client query is received so that it is necessary to SERVFAIL the longest waiting client (see BIND 9 ARM `recursive-clients` limit and soft quota), then it is possible for a race to occur between providing a stale answer to this older client and sending an early timeout SERVFAIL, which may cause an assertion failure. This issue affects BIND 9 versions 9.16.12 through 9.16.36, 9.18.0 through 9.18.10, 9.19.0 through 9.19.8, and 9.16.12-S1 through 9.16.36-S1.

Show More

A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.

The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 throu ... The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.

Show More

By flooding the target resolver with queries exploiting this flaw an attacker can significantly impair the resolver's performance, effectively denying legitimate clients access to the DNS resolution service.

To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanu ... To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.

Show More

If a resolver cache has a very large number of ECS records stored for the same name, the process of cleaning the cache database node for this name can significantly impair query performance. This issue affects BIND 9 versions 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.

A flaw in query-handling code can cause `named` to exit prematurely with an assertion failure when: - `nxdomain-redirect <domain>;` is configured, and - the resolver receives a PTR query for an RFC 1918 address that would normally result in an authoritative NXDOMAIN response. This issue affects BIND 9 versions 9.12.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.