Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting remove ... In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development.

Show More

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: ... In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target.

Show More

In the Linux kernel, the following vulnerability has been resolved: smb3: missing lock when picking channel Coverity spotted a place where we should have been holding the channel lock when accessing the ses channel index. Addresses-Coverity: 1582039 ("Data race condition (MISSING_LOCK)")

In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: Make sure to free skb when it is completely used With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the f ... In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: Make sure to free skb when it is completely used With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed.

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put ... In the Linux kernel, the following vulnerability has been resolved: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations.

Show More

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we ca ... In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case

Show More

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a sha ... In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9

Show More

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) ... In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

Show More

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS.

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] ... In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources.

Show More

In the Linux kernel, the following vulnerability has been resolved: md: Don't suspend the array for interrupted reshape md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet. Meanwhile, there is a potential de ... In the Linux kernel, the following vulnerability has been resolved: md: Don't suspend the array for interrupted reshape md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet. Meanwhile, there is a potential deadlock for raid456: 1) reshape is interrupted; 2) set one of the disk WantReplacement, and add a new disk to the array, however, recovery won't start until the reshape is finished; 3) then issue an IO across reshpae position, this IO will wait for reshape to make progress; 4) continue to reshape, then md_start_sync() found there is a spare disk that can be added to conf, mddev_suspend() is called; Step 4 and step 3 is waiting for each other, deadlock triggered. Noted this problem is found by code review, and it's not reporduced yet. Fix this porblem by don't suspend the array for interrupted reshape, this is safe because conf won't be changed until reshape is done.

Show More

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), fo ... In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb 2) register new sync thread concurrently. 3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro 4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang; The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. Unfortunately, I need to read more code before I can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix the problem the easy way for now to prevent dm-raid regression.

Show More

In the Linux kernel, the following vulnerability has been resolved: ethtool: strset: fix message length calculation Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigg ... In the Linux kernel, the following vulnerability has been resolved: ethtool: strset: fix message length calculation Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigger: - there must be no skb size rounding up (e.g. reply_size of 684); - string set must be per-device (so that the header gets populated); - the device name must be at least 12 characters long. all in all with current user space it looks like reading priv flags is the only place this could potentially happen. Or with syzbot :)

Show More

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000 ... In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one.

Show More

In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when ... In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options.").

Show More

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: ... In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix use-after-free in nfs4_init_client() KASAN reports a use-after-free when attempting to mount two different exports through two different NICs that belong to the same server. Olga was able to hit this with kernels starting somewhere between 5.7 and 5.10, but I traced the patch that introduced the clear_bit() call to 4.13. So something must have changed in the refcounting of the clp pointer to make this call to nfs_put ... In the Linux kernel, the following vulnerability has been resolved: NFS: Fix use-after-free in nfs4_init_client() KASAN reports a use-after-free when attempting to mount two different exports through two different NICs that belong to the same server. Olga was able to hit this with kernels starting somewhere between 5.7 and 5.10, but I traced the patch that introduced the clear_bit() call to 4.13. So something must have changed in the refcounting of the clp pointer to make this call to nfs_put_client() the very last one.

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes ... In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way).

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 000000000 ... In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0 Call Trace: <IRQ> do_raw_spin_lock+0xc0/0xd0 _raw_spin_lock_irqsave+0x95/0xa0 cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci] usb_ep_queue+0x35/0x110 eth_start_xmit+0x220/0x3d0 [u_ether] ncm_tx_timeout+0x34/0x40 [usb_f_ncm] ? ncm_free_inst+0x50/0x50 [usb_f_ncm] __hrtimer_run_queues+0xac/0x440 hrtimer_run_softirq+0x8c/0xb0 __do_softirq+0xcf/0x428 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x61/0x70 irq_exit_rcu+0xc1/0xd0 sysvec_apic_timer_interrupt+0x52/0xb0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:do_raw_spin_trylock+0x18/0x40 RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000 _raw_spin_lock+0x3d/0x70 ? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] ? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci] ? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci] ? irq_thread+0xa0/0x1c0 irq_thread_fn+0x28/0x60 irq_thread+0x105/0x1c0 ? __kthread_parkme+0x42/0x90 ? irq_forced_thread_fn+0x90/0x90 ? wake_threads_waitq+0x30/0x30 ? irq_thread_check_affinity+0xe0/0xe0 kthread+0x12a/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 The root cause of issue is spin_lock/spin_unlock instruction instead spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler function.

Show More

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 ... In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully.

Show More

In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 0001028 ... In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow.

Show More

In the Linux kernel, the following vulnerability has been resolved: crypto: arm64/neonbs - fix out-of-bounds access on short input The bit-sliced implementation of AES-CTR operates on blocks of 128 bytes, and will fall back to the plain NEON version for tail blocks or inputs that are shorter than 128 bytes to begin with. It will call straight into the plain NEON asm helper, which performs all memory accesses in granules of 16 bytes (the size of a NEON register). For this reason, the associate ... In the Linux kernel, the following vulnerability has been resolved: crypto: arm64/neonbs - fix out-of-bounds access on short input The bit-sliced implementation of AES-CTR operates on blocks of 128 bytes, and will fall back to the plain NEON version for tail blocks or inputs that are shorter than 128 bytes to begin with. It will call straight into the plain NEON asm helper, which performs all memory accesses in granules of 16 bytes (the size of a NEON register). For this reason, the associated plain NEON glue code will copy inputs shorter than 16 bytes into a temporary buffer, given that this is a rare occurrence and it is not worth the effort to work around this in the asm code. The fallback from the bit-sliced NEON version fails to take this into account, potentially resulting in out-of-bounds accesses. So clone the same workaround, and use a temp buffer for short in/outputs.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent potential buffer overflow in map_hw_resources Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is print ... In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent potential buffer overflow in map_hw_resources Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7

Show More

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix uninitialized pointer dmactl In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initializ ... In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix uninitialized pointer dmactl In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch]

Show More

In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix NULL pointer dereference in sanitycheck() If due to a memory allocation failure mock_chain() returns NULL, it is passed to dma_fence_enable_sw_signaling() resulting in NULL pointer dereference there. Call dma_fence_enable_sw_signaling() only if mock_chain() succeeds. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: sysv: don't call sb_bread() with pointers_lock held syzbot is reporting sleep in atomic context in SysV filesystem [1], for sb_bread() is called with rw_spinlock held. A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by "Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12. Then, "[PATCH] err1-40: sysvfs lockin ... In the Linux kernel, the following vulnerability has been resolved: sysv: don't call sb_bread() with pointers_lock held syzbot is reporting sleep in atomic context in SysV filesystem [1], for sb_bread() is called with rw_spinlock held. A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by "Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12. Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the former bug by moving pointers_lock lock to the callers, but instead introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made this problem easier to hit). Al Viro suggested that why not to do like get_branch()/get_block()/ find_shared() in Minix filesystem does. And doing like that is almost a revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch() from with find_shared() is called without write_lock(&pointers_lock).

Show More

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: adding lock to protect encoder context list Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_enc_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block.

In the Linux kernel, the following vulnerability has been resolved: pstore/zone: Add a null pointer check to the psz_kmsg_read kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: dyndbg: fix old BUG_ON in >control parser Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't really look), lets make sure by removing it, doing pr_err and return -EINVAL instead.

In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the firs ... In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations. In `check_kprobe_address_safe()`, if the second `__module_text_address()` is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free). To fix this problem, we should not use separated `is_module_text_address()` and `__module_text_address()`, but use only `__module_text_address()` once and do `try_module_get(module)` which is only available with MODULE_STATE_LIVE.

Show More

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Properly link new fs rules into the tree Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a ... In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Properly link new fs rules into the tree Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle.

Show More

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain Remove netdevice from inet/ingress basechain in case NETDEV_UNREGISTER event is reported, otherwise a stale reference to netdevice remains in the hook list.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC] With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the ... In the Linux kernel, the following vulnerability has been resolved: LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC] With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc

Show More

In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: avoid deadlock on delete association path When deleting an association the shutdown path is deadlocking because we try to flush the nvmet_wq nested. Avoid this by deadlock by deferring the put work into its own work item.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Places the logic for checking if the group's block bitmap is corrupt under the protection of the group lock to avoid allocating blocks from the group with a corrupted block bitmap.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix race condition on enabling fast-xmit fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Rad ... In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008 CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 ... NIP _find_next_zero_bit+0x24/0x110 LR bitmap_find_next_zero_area_off+0x5c/0xe0 Call Trace: dev_printk_emit+0x38/0x48 (unreliable) iommu_area_alloc+0xc4/0x180 iommu_range_alloc+0x1e8/0x580 iommu_alloc+0x60/0x130 iommu_alloc_coherent+0x158/0x2b0 dma_iommu_alloc_coherent+0x3c/0x50 dma_alloc_attrs+0x170/0x1f0 mlx5_cmd_init+0xc0/0x760 [mlx5_core] mlx5_function_setup+0xf0/0x510 [mlx5_core] mlx5_init_one+0x84/0x210 [mlx5_core] probe_one+0x118/0x2c0 [mlx5_core] local_pci_probe+0x68/0x110 pci_call_probe+0x68/0x200 pci_device_probe+0xbc/0x1a0 really_probe+0x104/0x540 __driver_probe_device+0xb4/0x230 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x16c/0x300 driver_register+0xa4/0x1b0 __pci_register_driver+0x68/0x80 mlx5_init+0xb8/0x100 [mlx5_core] do_one_initcall+0x60/0x300 do_init_module+0x7c/0x2b0 At the time of LPAR dump, before kexec hands over control to kdump kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT. For the SR-IOV case, default DMA window "ibm,dma-window" is removed from the FDT and DDW added, for the device. Now, kexec hands over control to the kdump kernel. When the kdump kernel initializes, PCI busses are scanned and IOMMU group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV case, there is no "ibm,dma-window". The original commit: b1fc44eaa9ba, fixes the path where memory is pre-mapped (direct mapped) to the DDW. When TCEs are direct mapped, there is no need to initialize IOMMU tables. iommu_table_setparms_lpar() only considers "ibm,dma-window" property when initiallizing IOMMU table. In the scenario where TCEs are dynamically allocated for SR-IOV, newly created IOMMU table is not initialized. Later, when the device driver tries to enter TCEs for the SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc(). The fix is to initialize the IOMMU table with DDW property stored in the FDT. There are 2 points to remember: 1. For the dedicated adapter, kdump kernel would encounter both default and DDW in FDT. In this case, DDW property is used to initialize the IOMMU table. 2. A DDW could be direct or dynamic mapped. kdump kernel would initialize IOMMU table and mark the existing DDW as "dynamic". This works fine since, at the time of table initialization, iommu_table_clear() makes some space in the DDW, for some predefined number of TCEs which are needed for kdump to succeed.

Show More

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix protection fault in iommufd_test_syz_conv_iova Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0 ... In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix protection fault in iommufd_test_syz_conv_iova Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0+0x2ec/0x390 iommufd_test+0x1058/0x1e30 iommufd_fops_ioctl+0x381/0x510 vfs_ioctl __do_sys_ioctl __se_sys_ioctl __x64_sys_ioctl+0x170/0x1e0 do_syscall_x64 do_syscall_64+0x71/0x140 This is because the new iommufd_access_change_ioas() sets access->ioas to NULL during its process, so the lock might be gone in a concurrent racing context. Fix this by doing the same access->ioas sanity as iommufd_access_rw() and iommufd_access_pin_pages() functions do.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() syzbot reported the following NULL pointer dereference issue [1]: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [ ... In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() syzbot reported the following NULL pointer dereference issue [1]: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called concurrently, psock->saved_data_ready can be NULL, causing the above issue. This patch fixes this issue by calling the appropriate data ready function using the sk_psock_data_ready() helper and protecting it from concurrency with sk->sk_callback_lock.

Show More