Vulnerabilities (CVE)

Git is a revision control system. The Git project recommends to avoid working in untrusted repositories, and instead to clone it first with `git clone --no-local` to obtain a clean copy. Git has specific protections to make that a safe operation even with an untrusted source repository, but vulnerabilities allow those protections to be bypassed. In the context of cloning local repositories owned by other users, this vulnerability has been covered in CVE-2024-32004. But there are circumstances wh ... Git is a revision control system. The Git project recommends to avoid working in untrusted repositories, and instead to clone it first with `git clone --no-local` to obtain a clean copy. Git has specific protections to make that a safe operation even with an untrusted source repository, but vulnerabilities allow those protections to be bypassed. In the context of cloning local repositories owned by other users, this vulnerability has been covered in CVE-2024-32004. But there are circumstances where the fixes for CVE-2024-32004 are not enough: For example, when obtaining a `.zip` file containing a full copy of a Git repository, it should not be trusted by default to be safe, as e.g. hooks could be configured to run within the context of that repository. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. As a workaround, avoid using Git in repositories that have been obtained via archives from untrusted sources.

Show More

Unlike 32-bit PV guests, HVM guests may switch freely between 64-bit and other modes. This in particular means that they may set registers used to pass 32-bit-mode hypercall arguments to values outside of the range 32-bit code would be able to set them to. When processing of hypercalls takes a considerable amount of time, the hypervisor may choose to invoke a hypercall continuation. Doing so involves putting (perhaps updated) hypercall arguments in respective registers. For guests not runnin ... Unlike 32-bit PV guests, HVM guests may switch freely between 64-bit and other modes. This in particular means that they may set registers used to pass 32-bit-mode hypercall arguments to values outside of the range 32-bit code would be able to set them to. When processing of hypercalls takes a considerable amount of time, the hypervisor may choose to invoke a hypercall continuation. Doing so involves putting (perhaps updated) hypercall arguments in respective registers. For guests not running in 64-bit mode this further involves a certain amount of translation of the values. Unfortunately internal sanity checking of these translated values assumes high halves of registers to always be clear when invoking a hypercall. When this is found not to be the case, it triggers a consistency check in the hypervisor and causes a crash.

Show More

Because of a logical error in XSA-407 (Branch Type Confusion), the mitigation is not applied properly when it is intended to be used. XSA-434 (Speculative Return Stack Overflow) uses the same infrastructure, so is equally impacted. For more details, see: https://xenbits.xen.org/xsa/advisory-407.html https://xenbits.xen.org/xsa/advisory-434.html

Rust is a programming language. The Rust Security Response WG was notified that the Rust standard library prior to version 1.77.2 did not properly escape arguments when invoking batch files (with the `bat` and `cmd` extensions) on Windows using the `Command`. An attacker able to control the arguments passed to the spawned process could execute arbitrary shell commands by bypassing the escaping. The severity of this vulnerability is critical for those who invoke batch files on Windows with untrus ... Rust is a programming language. The Rust Security Response WG was notified that the Rust standard library prior to version 1.77.2 did not properly escape arguments when invoking batch files (with the `bat` and `cmd` extensions) on Windows using the `Command`. An attacker able to control the arguments passed to the spawned process could execute arbitrary shell commands by bypassing the escaping. The severity of this vulnerability is critical for those who invoke batch files on Windows with untrusted arguments. No other platform or use is affected. The `Command::arg` and `Command::args` APIs state in their documentation that the arguments will be passed to the spawned process as-is, regardless of the content of the arguments, and will not be evaluated by a shell. This means it should be safe to pass untrusted input as an argument. On Windows, the implementation of this is more complex than other platforms, because the Windows API only provides a single string containing all the arguments to the spawned process, and it's up to the spawned process to split them. Most programs use the standard C run-time argv, which in practice results in a mostly consistent way arguments are splitted. One exception though is `cmd.exe` (used among other things to execute batch files), which has its own argument splitting logic. That forces the standard library to implement custom escaping for arguments passed to batch files. Unfortunately it was reported that our escaping logic was not thorough enough, and it was possible to pass malicious arguments that would result in arbitrary shell execution. Due to the complexity of `cmd.exe`, we didn't identify a solution that would correctly escape arguments in all cases. To maintain our API guarantees, we improved the robustness of the escaping code, and changed the `Command` API to return an `InvalidInput` error when it cannot safely escape an argument. This error will be emitted when spawning the process. The fix is included in Rust 1.77.2. Note that the new escaping logic for batch files errs on the conservative side, and could reject valid arguments. Those who implement the escaping themselves or only handle trusted inputs on Windows can also use the `CommandExt::raw_arg` method to bypass the standard library's escaping logic.

Show More

The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the "NSEC3" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.

In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we r ... In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] <TASK> [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 [ copy more details from report ]

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate the parameters of bo mapping operations more clearly Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2 This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap. The basic problem here is that after the move the old location is simply not available any more. Some fixes were suggested, but essentially we should call the move notification before actually moving things because only this way we have the correct order for DMA-buf and VM move not ... In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2 This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap. The basic problem here is that after the move the old location is simply not available any more. Some fixes were suggested, but essentially we should call the move notification before actually moving things because only this way we have the correct order for DMA-buf and VM move notifications as well. Also rework the statistic handling so that we don't update the eviction counter before the move. v2: add missing NULL check

Show More

Out of bounds write in V8 in Google Chrome prior to 124.0.6367.207 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High)

In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_l ... In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")

Show More

In the Linux kernel, the following vulnerability has been resolved: speakup: Avoid crash on very long word In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer.

In the Linux kernel, the following vulnerability has been resolved: serial: mxs-auart: add spinlock around changing cts state The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec ... In the Linux kernel, the following vulnerability has been resolved: serial: mxs-auart: add spinlock around changing cts state The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...)

Show More

In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix incomplete endpoint checking While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on ... In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix incomplete endpoint checking While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller:

Show More

In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0 ... In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be ---truncated---

Show More

Apache HTTP Server 2.4.53 and earlier may crash or disclose information due to a read beyond bounds in ap_strcmp_match() when provided with an extremely large input buffer. While no code distributed with the server can be coerced into such a call, third-party modules or lua scripts that use ap_strcmp_match() may hypothetically be affected.

Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.

A vulnerability was discovered in how p2p/p2p_pd.c in wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision discovery requests. It could result in denial of service or other impact (potentially execution of arbitrary code), for an attacker within radio range.

An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirecto ... An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).

Show More

There's a flaw in Python 3's pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.

An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.

The email module of Python through 3.11.3 incorrectly parses e-mail addresses that contain a special character. The wrong portion of an RFC2822 header is identified as the value of the addr-spec. In some applications, an attacker can bypass a protection mechanism in which application access is granted only after verifying receipt of e-mail to a specific domain (e.g., only @company.example.com addresses may be used for signup). This occurs in email/_parseaddr.py in recent versions of Python.

A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.

An XSS vulnerability was discovered in python-lxml's clean module versions before 4.6.3. When disabling the safe_attrs_only and forms arguments, the Cleaner class does not remove the formaction attribute allowing for JS to bypass the sanitizer. A remote attacker could exploit this flaw to run arbitrary JS code on users who interact with incorrectly sanitized HTML. This issue is patched in lxml 4.6.3.

Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states "Warning: http.server is not recommended for production. It only implements basic security checks."

decompress_gunzip.c in BusyBox through 1.32.1 mishandles the error bit on the huft_build result pointer, with a resultant invalid free or segmentation fault, via malformed gzip data.

The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result i ... The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.

Show More

xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.

The RSVP parser in tcpdump before 4.9.3 has a buffer over-read in print-rsvp.c:rsvp_obj_print().

A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like '\r' and '\n' in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.

A XSS vulnerability was discovered in python-lxml's clean module. The module's parser didn't properly imitate browsers, which caused different behaviors between the sanitizer and the user's page. A remote attacker could exploit this flaw to run arbitrary HTML/JS code.

A heap-based buffer overflow vulnerability exists in the LookupTable::SetLUT functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.

An out-of-bounds write vulnerability exists in the JPEG2000Codec::DecodeByStreamsCommon functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted DICOM file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

In Paramiko before 2.10.1, a race condition (between creation and chmod) in the write_private_key_file function could allow unauthorized information disclosure.

Unchecked script execution in Graphic on-click binding in affected LibreOffice versions allows an attacker to create a document which without prompt will execute scripts built-into LibreOffice on clicking a graphic. Such scripts were previously deemed trusted but are now deemed untrusted.

Relax-and-Recover (aka ReaR) through 2.7 creates a world-readable initrd when using GRUB_RESCUE=y. This allows local attackers to gain access to system secrets otherwise only readable by root.

Regular expression denial of service in Pydanic < 2.4.0, < 1.10.13 allows remote attackers to cause denial of service via a crafted email string.

Pydantic is a data validation and settings management using Python type hinting. In affected versions passing either `'infinity'`, `'inf'` or `float('inf')` (or their negatives) to `datetime` or `date` fields causes validation to run forever with 100% CPU usage (on one CPU). Pydantic has been patched with fixes available in the following versions: v1.8.2, v1.7.4, v1.6.2. All these versions are available on pypi(https://pypi.org/project/pydantic/#history), and will be available on conda-forge(htt ... Pydantic is a data validation and settings management using Python type hinting. In affected versions passing either `'infinity'`, `'inf'` or `float('inf')` (or their negatives) to `datetime` or `date` fields causes validation to run forever with 100% CPU usage (on one CPU). Pydantic has been patched with fixes available in the following versions: v1.8.2, v1.7.4, v1.6.2. All these versions are available on pypi(https://pypi.org/project/pydantic/#history), and will be available on conda-forge(https://anaconda.org/conda-forge/pydantic) soon. See the changelog(https://pydantic-docs.helpmanual.io/) for details. If you absolutely can't upgrade, you can work around this risk using a validator(https://pydantic-docs.helpmanual.io/usage/validators/) to catch these values. This is not an ideal solution (in particular you'll need a slightly different function for datetimes), instead of a hack like this you should upgrade pydantic. If you are not using v1.8.x, v1.7.x or v1.6.x and are unable to upgrade to a fixed version of pydantic, please create an issue at https://github.com/samuelcolvin/pydantic/issues requesting a back-port, and we will endeavour to release a patch for earlier versions of pydantic.

Show More

jose is JavaScript module for JSON Object Signing and Encryption, providing support for JSON Web Tokens (JWT), JSON Web Signature (JWS), JSON Web Encryption (JWE), JSON Web Key (JWK), JSON Web Key Set (JWKS), and more. A vulnerability has been identified in the JSON Web Encryption (JWE) decryption interfaces, specifically related to the support for decompressing plaintext after its decryption. Under certain conditions it is possible to have the user's environment consume unreasonable amount of ... jose is JavaScript module for JSON Object Signing and Encryption, providing support for JSON Web Tokens (JWT), JSON Web Signature (JWS), JSON Web Encryption (JWE), JSON Web Key (JWK), JSON Web Key Set (JWKS), and more. A vulnerability has been identified in the JSON Web Encryption (JWE) decryption interfaces, specifically related to the support for decompressing plaintext after its decryption. Under certain conditions it is possible to have the user's environment consume unreasonable amount of CPU time or memory during JWE Decryption operations. This issue has been patched in versions 2.0.7 and 4.15.5.

Show More

Blkid in util-linux before 2.26rc-1 allows local users to execute arbitrary code.

The ICMPv6 parser in tcpdump before 4.9.3 has a buffer over-read in print-icmp6.c.