Vulnerabilities (CVE)

In Eclipse ThreadX before version 6.4.3, the thread module has a setting of maximum priority. In some cases the check of that maximum priority wasn't performed, allowing, as a result, to obtain a thread with higher priority than expected and causing a possible denial of service.

In Eclipse ThreadX before 6.4.3, when memory protection is enabled, syscall parameters verification wasn't enough, allowing an attacker to obtain an arbitrary memory read/write.

In Eclipse ThreadX before version 6.4.3, an attacker can cause a denial of service (crash) by providing a pointer to a reserved or unmapped memory region. Vulnerable system calls had a check of pointers, but that check wasn't verifying whether the pointer is outside the module memory region.

In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ip_packet_receive() function when received an Ethernet with type set as IP but no IP data.

In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() function when received an Ethernet frame with less than 4 bytes of IP packet.

In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check in_nx_secure_tls_proc_clienthello_supported_versions_extension() in the extension version field.

In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check resulting it out by two out of bound read.

In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was a potential out of bound read in _nx_secure_tls_process_clienthello() because of a missing validation of PSK length provided in the user message.

In Eclipse OpenJ9 versions up to 0.51, when used with OpenJDK version 8 a stack based buffer overflow can be caused by modifying a file on disk that is read when the JVM starts.

In Eclipse Jetty 7.2.2 to 9.4.38, 10.0.0.alpha0 to 10.0.1, and 11.0.0.alpha0 to 11.0.1, CPU usage can reach 100% upon receiving a large invalid TLS frame.

In Eclipse Jetty 9.4.6.v20170531 to 9.4.36.v20210114 (inclusive), 10.0.0, and 11.0.0 when Jetty handles a request containing multiple Accept headers with a large number of “quality” (i.e. q) parameters, the server may enter a denial of service (DoS) state due to high CPU usage processing those quality values, resulting in minutes of CPU time exhausted processing those quality values.

In NetX Duo component HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.3, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length smaller than the data request size. A possible workaround is to disable HTTP PUT support. This issue follows an uncomplete fix in CVE-2025-0728.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.3, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length in one packet smaller than the data request size of the other packet. A possible workaround is to disable HTTP PUT support. This issue follows an incomplete fix of CVE-2025-0727

An integer underflow during deserialization may allow any unauthenticated user to read out of bounds heap memory. This may result into secret data or pointers revealing the layout of the address space to be included into a deserialized data structure, which may potentially lead to thread crashes or cause denial of service conditions.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.2, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length smaller than the data request size. A possible workaround is to disable HTTP PUT support.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.2, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length in one packet smaller than the data request size of the other packet. A possible workaround is to disable HTTP PUT support.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.2, an attacker can cause a denial of service by specially crafted packets. The core issue is missing closing of a file in case of an error condition, resulting in the 404 error for each further file request. Users can work-around the issue by disabling the PUT request support.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.3, an attacker can cause a denial of service by specially crafted packets. The core issue is missing closing of a file in case of an error condition, resulting in the 404 error for each further file request. Users can work-around the issue by disabling the PUT request support. This issue follows an incomplete fix of CVE-2025-0726.

In Eclipse Jetty versions 9.4.0 to 9.4.56 a buffer can be incorrectly released when confronted with a gzip error when inflating a request body. This can result in corrupted and/or inadvertent sharing of data between requests.

In Eclipse Jetty versions 12.0.0 to 12.0.16 included, an HTTP/2 client can specify a very large value for the HTTP/2 settings parameter SETTINGS_MAX_HEADER_LIST_SIZE. The Jetty HTTP/2 server does not perform validation on this setting, and tries to allocate a ByteBuffer of the specified capacity to encode HTTP responses, likely resulting in OutOfMemoryError being thrown, or even the JVM process exiting.

A vulnerability in the Eclipse Open VSX Registry’s automated publishing system could have allowed unauthorized uploads of extensions. Specifically, the system’s build scripts were executed without proper isolation, potentially exposing a privileged token. This token enabled the publishing of new extension versions under any namespace, including those not controlled by an attacker. However, it did not permit deletion of existing extensions, overwriting of published versions, or access to administ ... A vulnerability in the Eclipse Open VSX Registry’s automated publishing system could have allowed unauthorized uploads of extensions. Specifically, the system’s build scripts were executed without proper isolation, potentially exposing a privileged token. This token enabled the publishing of new extension versions under any namespace, including those not controlled by an attacker. However, it did not permit deletion of existing extensions, overwriting of published versions, or access to administrative features of the registry. The issue was reported on May 4, 2025, fully resolved by June 24, and followed by a comprehensive audit. No evidence of compromise was found, though 81 extensions were proactively deactivated as a precaution. The standard publishing process remained unaffected. Recommendations have been issued to mitigate similar risks in the future.

Show More

In OpenVSX version v0.9.0 to v0.20.0, the /user/namespace/{namespace}/details API allows a user to edit all namespace details, even if the user is not a namespace Owner or Contributor. The details include: name, description, website, support link and social media links. The same issues existed in /user/namespace/{namespace}/details/logo and allowed a user to change the logo.

In Eclipse GlassFish version 7.0.15 is possible to perform Reflected Cross-site scripting attacks in the Administration Console.

In Eclipse GlassFish version 7.0.15 is possible to perform Stored Cross-site Scripting attacks by modifying the configuration file in the underlying operating system.

In Eclipse GlassFish version 7.0.15 is possible to perform Stored Cross-site scripting attacks in the Administration Console.

In Eclipse GlassFish version 7.0.16 or earlier it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts.

In Eclipse GlassFish version 7.0.15 is possible to perform Stored Cross-site scripting attacks in the Administration Console.

In Eclipse GlassFish since version 6.2.5 it is possible to perform a Server Side Request Forgery attack in specific endpoints.

Eclipse Jetty is a lightweight, highly scalable, Java-based web server and Servlet engine . It includes a utility class, HttpURI, for URI/URL parsing. The HttpURI class does insufficient validation on the authority segment of a URI. However the behaviour of HttpURI differs from the common browsers in how it handles a URI that would be considered invalid if fully validated against the RRC. Specifically HttpURI and the browser may differ on the value of the host extracted from an invalid UR ... Eclipse Jetty is a lightweight, highly scalable, Java-based web server and Servlet engine . It includes a utility class, HttpURI, for URI/URL parsing. The HttpURI class does insufficient validation on the authority segment of a URI. However the behaviour of HttpURI differs from the common browsers in how it handles a URI that would be considered invalid if fully validated against the RRC. Specifically HttpURI and the browser may differ on the value of the host extracted from an invalid URI and thus a combination of Jetty and a vulnerable browser may be vulnerable to a open redirect attack or to a SSRF attack if the URI is used after passing validation checks.

Show More

The broker in Eclipse Mosquitto 1.3.2 through 2.x before 2.0.16 has a memory leak that can be abused remotely when a client sends many QoS 2 messages with duplicate message IDs, and fails to respond to PUBREC commands. This occurs because of mishandling of EAGAIN from the libc send function.

In Eclipse Mosquito before and including 2.0.5, establishing a connection to the mosquitto server without sending data causes the EPOLLOUT event to be added, which results excessive CPU consumption. This could be used by a malicious actor to perform denial of service type attack. This issue is fixed in 2.0.6

Eclipse Jetty Canonical Repository is the canonical repository for the Jetty project. Users of the CgiServlet with a very specific command structure may have the wrong command executed. If a user sends a request to a org.eclipse.jetty.servlets.CGI Servlet for a binary with a space in its name, the servlet will escape the command by wrapping it in quotation marks. This wrapped command, plus an optional command prefix, will then be executed through a call to Runtime.exec. If the original binary na ... Eclipse Jetty Canonical Repository is the canonical repository for the Jetty project. Users of the CgiServlet with a very specific command structure may have the wrong command executed. If a user sends a request to a org.eclipse.jetty.servlets.CGI Servlet for a binary with a space in its name, the servlet will escape the command by wrapping it in quotation marks. This wrapped command, plus an optional command prefix, will then be executed through a call to Runtime.exec. If the original binary name provided by the user contains a quotation mark followed by a space, the resulting command line will contain multiple tokens instead of one. This issue was patched in version 9.4.52, 10.0.16, 11.0.16 and 12.0.0-beta2.

Show More

In Eclipse Openj9 before version 0.35.0, interface calls can be inlined without a runtime type check. Malicious bytecode could make use of this inlining to access or modify memory via an incompatible type.

In Mosquitto before 1.4.12, pattern based ACLs can be bypassed by clients that set their username/client id to '#' or '+'. This allows locally or remotely connected clients to access MQTT topics that they do have the rights to. The same issue may be present in third party authentication/access control plugins for Mosquitto.

Eclipse tinydtls 0.8.2 for Eclipse IoT allows remote attackers to cause a denial of service (DTLS peer crash) by sending a "Change cipher spec" packet without pre-handshake.

The path normalization mechanism in PathResource class in Eclipse Jetty 9.3.x before 9.3.9 on Windows allows remote attackers to bypass protected resource restrictions and other security constraints via a URL with certain escaped characters, related to backslashes.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertiseme ... The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

Show More

Jetty through 9.4.x is prone to a timing channel in util/security/Password.java, which makes it easier for remote attackers to obtain access by observing elapsed times before rejection of incorrect passwords.

In Mosquitto through 1.4.12, mosquitto.db (aka the persistence file) is world readable, which allows local users to obtain sensitive MQTT topic information.

The exception handling code in Eclipse Jetty before 9.2.9.v20150224 allows remote attackers to obtain sensitive information from process memory via illegal characters in an HTTP header, aka JetLeak.