Vulnerabilities (CVE)

A flaw was found in Keycloak. An attacker can exploit this vulnerability by modifying the organization ID and target email within a legitimate invitation token's JSON Web Token (JWT) payload. This lack of cryptographic signature verification allows the attacker to successfully self-register into an unauthorized organization, leading to unauthorized access.

A flaw was found in Keycloak. A vulnerability exists in the jwt-authorization-grant flow where the server fails to verify if an Identity Provider (IdP) is enabled before issuing tokens. The issuer lookup mechanism (lookupIdentityProviderFromIssuer) retrieves the IdP configuration but does not filter for isEnabled=false. If an administrator disables an IdP (e.g., due to a compromise or offboarding), an entity possessing that IdP's signing key can still generate valid JWT assertions that Keycloak ... A flaw was found in Keycloak. A vulnerability exists in the jwt-authorization-grant flow where the server fails to verify if an Identity Provider (IdP) is enabled before issuing tokens. The issuer lookup mechanism (lookupIdentityProviderFromIssuer) retrieves the IdP configuration but does not filter for isEnabled=false. If an administrator disables an IdP (e.g., due to a compromise or offboarding), an entity possessing that IdP's signing key can still generate valid JWT assertions that Keycloak accepts, resulting in the issuance of valid access tokens.

Show More

A flaw was found in Keycloak. A significant Broken Access Control vulnerability exists in the UserManagedPermissionService (UMA Protection API). When updating or deleting a UMA policy associated with multiple resources, the authorization check only verifies the caller's ownership against the first resource in the policy's list. This allows a user (Owner A) who owns one resource (RA) to update a shared policy and modify authorization rules for other resources (e.g., RB) in that same policy, even ... A flaw was found in Keycloak. A significant Broken Access Control vulnerability exists in the UserManagedPermissionService (UMA Protection API). When updating or deleting a UMA policy associated with multiple resources, the authorization check only verifies the caller's ownership against the first resource in the policy's list. This allows a user (Owner A) who owns one resource (RA) to update a shared policy and modify authorization rules for other resources (e.g., RB) in that same policy, even if those other resources are owned by a different user (Owner B). This constitutes a horizontal privilege escalation.

Show More

A flaw was found in the keycloak-services component of Keycloak. This vulnerability allows the issuance of access and refresh tokens for disabled users, leading to unauthorized use of previously revoked privileges, via a business logic vulnerability in the Token Exchange implementation when a privileged client invokes the token exchange flow.

A flaw was found in Keycloak Admin API. This vulnerability allows an administrator with limited privileges to retrieve sensitive custom attributes via the /unmanagedAttributes endpoint, bypassing User Profile visibility settings.

The Tapo C220 v1 and C520WS v2 cameras’ HTTP service does not safely handle POST requests containing an excessively large Content-Length header. The resulting failed memory allocation triggers a NULL pointer dereference, causing the main service process to crash. An unauthenticated attacker can repeatedly crash the service, causing temporary denial of service. The device restarts automatically, and repeated requests can keep it unavailable.

DotNetNuke 9.5 contains a persistent cross-site scripting vulnerability that allows normal users to upload malicious XML files with executable scripts through journal tools. Attackers can upload XML files with XHTML namespace scripts to execute arbitrary JavaScript in users' browsers, potentially bypassing CSRF protections and performing more damaging attacks.

PHP-Fusion 9.03.50 contains a remote code execution vulnerability in the 'add_panel_form()' function that allows attackers to execute arbitrary code through an eval() function with unsanitized POST data. Attackers can exploit the vulnerability by sending crafted panel_content POST parameters to the panels.php administration endpoint to execute malicious code.

PHP-Fusion 9.03.50 panels.php is vulnerable to cross-site scripting (XSS) via the 'panel_content' POST parameter. The application fails to properly sanitize user input before rendering it in the browser, allowing attackers to inject arbitrary JavaScript. This can be exploited by submitting crafted input to the 'panel_content' field in panels.php, resulting in execution of malicious scripts in the context of the affected site.

UltraVNC Launcher 1.2.4.0 contains a denial of service vulnerability in the Repeater Host configuration field that allows attackers to crash the application. Attackers can paste an overly long string of 300 characters into the Repeater Host property to trigger an application crash.

UltraVNC Launcher 1.2.4.0 contains a denial of service vulnerability in its password configuration properties that allows local attackers to crash the application. Attackers can paste an overly long 300-character string into the password field to trigger an application crash and prevent normal launcher functionality.

Nsauditor 3.2.0.0 contains a denial of service vulnerability in the registration name input field that allows attackers to crash the application. Attackers can create a malicious payload of 1000 bytes of repeated characters to trigger an application crash when pasted into the registration name field.

Nsauditor 3.0.28 and 3.2.1.0 contains a buffer overflow vulnerability in the DNS Lookup tool that allows attackers to execute arbitrary code by overwriting memory. Attackers can craft a malicious DNS query payload to trigger a three-byte overwrite, bypass ASLR, and execute shellcode through a carefully constructed exploit.

In the Linux kernel, the following vulnerability has been resolved: Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe rpi_firmware_get() take reference, we need to release it in error paths as well. Use devm_rpi_firmware_get() helper to handling the resources. Also remove the existing rpi_firmware_put().

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Add a check for oversized packets Occasionnaly we may get oversized packets from the hardware which exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early check which drops the packet to avoid invoking skb_over_panic() and move on to processing the next packet.

In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_ ... In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments.

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free for cached IPU bio xfstest generic/019 reports a bug: kernel BUG at mm/filemap.c:1619! RIP: 0010:folio_end_writeback+0x8a/0x90 Call Trace: end_page_writeback+0x1c/0x60 f2fs_write_end_io+0x199/0x420 bio_endio+0x104/0x180 submit_bio_noacct+0xa5/0x510 submit_bio+0x48/0x80 f2fs_submit_write_bio+0x35/0x300 f2fs_submit_merged_ipu_write+0x2a0/0x2b0 f2fs_write_single_data_page+0x838/0x8b0 f2 ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free for cached IPU bio xfstest generic/019 reports a bug: kernel BUG at mm/filemap.c:1619! RIP: 0010:folio_end_writeback+0x8a/0x90 Call Trace: end_page_writeback+0x1c/0x60 f2fs_write_end_io+0x199/0x420 bio_endio+0x104/0x180 submit_bio_noacct+0xa5/0x510 submit_bio+0x48/0x80 f2fs_submit_write_bio+0x35/0x300 f2fs_submit_merged_ipu_write+0x2a0/0x2b0 f2fs_write_single_data_page+0x838/0x8b0 f2fs_write_cache_pages+0x379/0xa30 f2fs_write_data_pages+0x30c/0x340 do_writepages+0xd8/0x1b0 __writeback_single_inode+0x44/0x370 writeback_sb_inodes+0x233/0x4d0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x1dd/0x2d0 wb_workfn+0x367/0x4a0 process_one_work+0x21d/0x430 worker_thread+0x4e/0x3c0 kthread+0x103/0x130 ret_from_fork+0x2c/0x50 The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write() in f2fs_write_single_data_page() tries to flush IPU bio in cache, however f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter, result in submitting random cached bio which belong to other IO context, then it will cause use-after-free issue, fix it by adding additional validity check.

Show More

In the Linux kernel, the following vulnerability has been resolved: btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF ... In the Linux kernel, the following vulnerability has been resolved: btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1 [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017 [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00 [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246 [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100 [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8 [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000 [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0 [530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000 [530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0 [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [530.928] Call Trace: [530.934] ? btrfs_printk+0x13b/0x18c [530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130 [530.955] btrfs_map_bio+0x75/0x330 [530.963] ? kmem_cache_alloc+0x12a/0x2d0 [530.973] ? btrfs_submit_metadata_bio+0x63/0x100 [530.984] btrfs_submit_metadata_bio+0xa4/0x100 [530.995] submit_extent_page+0x30f/0x360 [531.004] read_extent_buffer_pages+0x49e/0x6d0 [531.015] ? submit_extent_page+0x360/0x360 [531.025] btree_read_extent_buffer_pages+0x5f/0x150 [531.037] read_tree_block+0x37/0x60 [531.046] read_block_for_search+0x18b/0x410 [531.056] btrfs_search_old_slot+0x198/0x2f0 [531.066] resolve_indirect_ref+0xfe/0x6f0 [531.076] ? ulist_alloc+0x31/0x60 [531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0 [531.095] find_parent_nodes+0x720/0x1830 [531.105] ? ulist_alloc+0x10/0x60 [531.113] iterate_extent_inodes+0xea/0x370 [531.123] ? btrfs_previous_extent_item+0x8f/0x110 [531.134] ? btrfs_search_path_in_tree+0x240/0x240 [531.146] iterate_inodes_from_logical+0x98/0xd0 [531.157] ? btrfs_search_path_in_tree+0x240/0x240 [531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180 [531.179] btrfs_ioctl+0xe2/0x2eb0 This occurs when logical inode resolution takes a tree mod log sequence number, and then while backref walking hits a rewind on a busy node which has the following sequence of tree mod log operations (numbers filled in from a specific example, but they are somewhat arbitrary) REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 When this sequence gets applied via btrfs_tree_mod_log_rewind, it allocates a fresh rewind eb, and first inserts the correct key info for the 533 elements, then overwrites the first 456 of them, then decrements the count by 456 via the add ops, then rewinds the move by doing a memmove from 456:988->0:532. We have never written anything past 532, ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to proce ... In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed.

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject auth/assoc to AP with our address If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.

In the Linux kernel, the following vulnerability has been resolved: ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy For some reason, the driver adding support for Exynos5420 MIPI phy back in 2016 wasn't used on Exynos5420, which caused a kernel panic. Add the proper compatible for it.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check for station first in client probe When probing a client, first check if we have it, and then check for the channel context, otherwise you can trigger the warning there easily by probing when the AP isn't even started yet. Since a client existing means the AP is also operating, we can then keep the warning. Also simplify the moved code a bit.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't trust firmware n_channels If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should ... In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't trust firmware n_channels If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should be doing it correctly, so check more strictly.

Show More

In the Linux kernel, the following vulnerability has been resolved: sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop With this refcnt added in sctp_stream_priorities, we don't need to traverse all streams to check if the prio is used by other streams when freeing one stream's prio in sctp_sched_prio_free_sid(). This can avoid a nested loop (up to 65535 * 65535), which may cause a stuck as Ying reported: watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:13 ... In the Linux kernel, the following vulnerability has been resolved: sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop With this refcnt added in sctp_stream_priorities, we don't need to traverse all streams to check if the prio is used by other streams when freeing one stream's prio in sctp_sched_prio_free_sid(). This can avoid a nested loop (up to 65535 * 65535), which may cause a stuck as Ying reported: watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136] Call Trace: <TASK> sctp_sched_prio_free_sid+0xab/0x100 [sctp] sctp_stream_free_ext+0x64/0xa0 [sctp] sctp_stream_free+0x31/0x50 [sctp] sctp_association_free+0xa5/0x200 [sctp] Note that it doesn't need to use refcount_t type for this counter, as its accessing is always protected under the sock lock. v1->v2: - add a check in sctp_sched_prio_set to avoid the possible prio_head refcnt overflow.

Show More

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlock in tc route query code Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleepin ... In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlock in tc route query code Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [ ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: gpio: sifive: Fix refcount leak in sifive_gpio_probe of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: cifs: Release folio lock on fscache read hit. Under the current code, when cifs_readpage_worker is called, the call contract is that the callee should unlock the page. This is documented in the read_folio section of Documentation/filesystems/vfs.rst as: > The filesystem should unlock the folio once the read has completed, > whether it was successful or not. Without this change, when fscache is in use and cache hit occurs dur ... In the Linux kernel, the following vulnerability has been resolved: cifs: Release folio lock on fscache read hit. Under the current code, when cifs_readpage_worker is called, the call contract is that the callee should unlock the page. This is documented in the read_folio section of Documentation/filesystems/vfs.rst as: > The filesystem should unlock the folio once the read has completed, > whether it was successful or not. Without this change, when fscache is in use and cache hit occurs during a read, the page lock is leaked, producing the following stack on subsequent reads (via mmap) to the page: $ cat /proc/3890/task/12864/stack [<0>] folio_wait_bit_common+0x124/0x350 [<0>] filemap_read_folio+0xad/0xf0 [<0>] filemap_fault+0x8b1/0xab0 [<0>] __do_fault+0x39/0x150 [<0>] do_fault+0x25c/0x3e0 [<0>] __handle_mm_fault+0x6ca/0xc70 [<0>] handle_mm_fault+0xe9/0x350 [<0>] do_user_addr_fault+0x225/0x6c0 [<0>] exc_page_fault+0x84/0x1b0 [<0>] asm_exc_page_fault+0x27/0x30 This requires a reboot to resolve; it is a deadlock. Note however that the call to cifs_readpage_from_fscache does mark the page clean, but does not free the folio lock. This happens in __cifs_readpage_from_fscache on success. Releasing the lock at that point however is not appropriate as cifs_readahead also calls cifs_readpage_from_fscache and *does* unconditionally release the lock after its return. This change therefore effectively makes cifs_readpage_worker work like cifs_readahead.

Show More

A security vulnerability has been detected in AprilRobotics apriltag up to 3.4.5. Affected by this vulnerability is the function apriltag_detector_detect of the file apriltag.c. The manipulation leads to memory corruption. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The identifier of the patch is cfac2f5ce1ffe2de25967eb1ab80bc5d99fc1a61. It is suggested to install a patch to address this issue.

Improper permission enforcement in Checkmk versions 2.4.0 before 2.4.0p21, 2.3.0 before 2.3.0p43, and 2.2.0 (EOL) allows users with the "Use WATO" permission to access the "Analyze configuration" page by directly navigating to its URL, bypassing the intended "Access analyze configuration" permission check. If these users also have the "Make changes, perform actions" permission, they can perform unauthorized actions such as disabling checks or acknowledging results.

DPA countermeasures in Silicon Labs' Series 2 devices are not reseeded under certain conditions.  This may allow an attacker to eventually extract secret keys through a DPA attack.

Dell Display and Peripheral Manager (Windows) versions prior to 2.2 contain an Improper Link Resolution Before File Access ('Link Following') vulnerability in the Installer and Service. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges

captive browser, a dedicated Chrome instance to log into captive portals without messing with DNS settings. In 25.05 and earlier, when programs.captive-browser is enabled, any user of the system can run arbitrary commands with the CAP_NET_RAW capability (binding to privileged ports, spoofing localhost traffic from privileged services...). This vulnerability is fixed in 25.11 and 26.05.

LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. The LangSmith SDK's distributed tracing feature is vulnerable to Server-Side Request Forgery via malicious HTTP headers. An attacker can inject arbitrary api_url values through the baggage header, causing the SDK to exfiltrate sensitive trace data to attacker-controlled endpoints. When using distributed tracing, the SDK parses incoming HTTP headers via RunTree.from_headers() in Python or RunTree.fromHeaders() in Typ ... LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. The LangSmith SDK's distributed tracing feature is vulnerable to Server-Side Request Forgery via malicious HTTP headers. An attacker can inject arbitrary api_url values through the baggage header, causing the SDK to exfiltrate sensitive trace data to attacker-controlled endpoints. When using distributed tracing, the SDK parses incoming HTTP headers via RunTree.from_headers() in Python or RunTree.fromHeaders() in Typescript. The baggage header can contain replica configurations including api_url and api_key fields. Prior to the fix, these attacker-controlled values were accepted without validation. When a traced operation completes, the SDK's post() and patch() methods send run data to all configured replica URLs, including any injected by an attacker. This vulnerability is fixed in version 0.6.3 of the Python SDK and 0.4.6 of the JavaScript SDK.

Show More

A vulnerability was identified in CCExtractor up to 183. This affects the function parse_PAT/parse_PMT in the library src/lib_ccx/ts_tables.c of the component MPEG-TS File Parser. Such manipulation leads to out-of-bounds read. The attack can only be performed from a local environment. The exploit is publicly available and might be used. The name of the patch is fd7271bae238ccb3ae8a71304ea64f0886324925. It is best practice to apply a patch to resolve this issue.

OpenSTAManager is an open source management software for technical assistance and invoicing. OpenSTAManager v2.9.8 and earlier contain a critical Error-Based SQL Injection vulnerability in the Prima Nota (Journal Entry) module's add.php file. The application fails to validate that comma-separated values from the id_documenti GET parameter are integers before using them in SQL IN() clauses, allowing attackers to inject arbitrary SQL commands and extract sensitive data through XPATH error messages ... OpenSTAManager is an open source management software for technical assistance and invoicing. OpenSTAManager v2.9.8 and earlier contain a critical Error-Based SQL Injection vulnerability in the Prima Nota (Journal Entry) module's add.php file. The application fails to validate that comma-separated values from the id_documenti GET parameter are integers before using them in SQL IN() clauses, allowing attackers to inject arbitrary SQL commands and extract sensitive data through XPATH error messages.

Show More

OpenSTAManager is an open source management software for technical assistance and invoicing. In 2.9.8 and earlier, a critical OS Command Injection vulnerability exists in the P7M (signed XML) file decoding functionality. An authenticated attacker can upload a ZIP file containing a .p7m file with a malicious filename to execute arbitrary system commands on the server.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but ... In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but set dev->kobj.parent = NULL ... glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto //"Error" label ... cleanup_glue_dir() //becaues glue_dir is NULL, not call //kobject_put() The preceding problem may cause insmod mac80211_hwsim.ko to failed. sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim' Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x224/0x280 kobject_add_internal+0x2aa/0x880 kobject_add+0x135/0x1a0 get_device_parent+0x3d7/0x590 device_add+0x2aa/0x1cb0 device_create_groups_vargs+0x1eb/0x260 device_create+0xdc/0x110 mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim] init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim] do_one_initcall+0x10f/0x630 do_init_module+0x19f/0x5e0 load_module+0x64b7/0x6eb0 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to register things with the same name in the same directory.

Show More

OpenSTAManager is an open source management software for technical assistance and invoicing. In 2.9.8 and earlier, an SQL Injection vulnerability exists in the ajax_select.php endpoint when handling the componenti operation. An authenticated attacker can inject malicious SQL code through the options[matricola] parameter.