Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: ARM: hisi: Add missing of_node_put after of_find_compatible_node of_find_compatible_node will increment the refcount of the returned device_node. Calling of_node_put() to avoid the refcount leak

In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix firmware activation deadlock scenarios Lockdep reports the following deadlock scenarios for CXL root device power-management, device_prepare(), operations, and device_shutdown() operations for 'nd_region' devices: Chain exists of: &nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ... In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix firmware activation deadlock scenarios Lockdep reports the following deadlock scenarios for CXL root device power-management, device_prepare(), operations, and device_shutdown() operations for 'nd_region' devices: Chain exists of: &nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(system_transition_mutex); lock(&nvdimm_bus->reconfig_mutex); lock(system_transition_mutex); lock(&nvdimm_region_key); Chain exists of: &cxl_nvdimm_bridge_key --> acpi_scan_lock --> &cxl_root_key Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cxl_root_key); lock(acpi_scan_lock); lock(&cxl_root_key); lock(&cxl_nvdimm_bridge_key); These stem from holding nvdimm_bus_lock() over hibernate_quiet_exec() which walks the entire system device topology taking device_lock() along the way. The nvdimm_bus_lock() is protecting against unregistration, multiple simultaneous ops callers, and preventing activate_show() from racing activate_store(). For the first 2, the lock is redundant. Unregistration already flushes all ops users, and sysfs already prevents multiple threads to be active in an ops handler at the same time. For the last userspace should already be waiting for its last activate_store() to complete, and does not need activate_show() to flush the write side, so this lock usage can be deleted in these attributes.

Show More

In the Linux kernel, the following vulnerability has been resolved: pinctrl: renesas: core: Fix possible null-ptr-deref in sh_pfc_map_resources() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next. Commit bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket fds.") added t ... In the Linux kernel, the following vulnerability has been resolved: list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next. Commit bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket fds.") added the first lockless ep_events_available(), and commit c5a282e9635e ("fs/epoll: reduce the scope of wq lock in epoll_wait()") made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 ("epoll: eliminate unnecessary lock for zero timeout") made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted: G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Show More

In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); ... In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: Input: sparcspkr - fix refcount leak in bbc_beep_probe of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: Fix refcount leak in xive_spapr_init of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix race condition between ext4_write and ext4_convert_inline_data Hulk Robot reported a BUG_ON: ================================================================== EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters kernel BUG at fs/ext4/ext4_jbd2.c:53! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 25371 Comm: syz-executor.3 ... In the Linux kernel, the following vulnerability has been resolved: ext4: fix race condition between ext4_write and ext4_convert_inline_data Hulk Robot reported a BUG_ON: ================================================================== EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters kernel BUG at fs/ext4/ext4_jbd2.c:53! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1 RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline] RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116 [...] Call Trace: ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795 generic_perform_write+0x279/0x3c0 mm/filemap.c:3344 ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270 ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520 do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732 do_iter_write+0x107/0x430 fs/read_write.c:861 vfs_writev fs/read_write.c:934 [inline] do_pwritev+0x1e5/0x380 fs/read_write.c:1031 [...] ================================================================== Above issue may happen as follows: cpu1 cpu2 __________________________|__________________________ do_pwritev vfs_writev do_iter_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_destroy_inline_data_nolock clear EXT4_STATE_MAY_INLINE_DATA ext4_map_blocks ext4_ext_map_blocks ext4_mb_new_blocks ext4_mb_regular_allocator ext4_mb_good_group_nolock ext4_mb_init_group ext4_mb_init_cache ext4_mb_generate_buddy --> error ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ext4_restore_inline_data set EXT4_STATE_MAY_INLINE_DATA ext4_block_write_begin ext4_da_write_end ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ext4_write_inline_data_end handle=NULL ext4_journal_stop(handle) __ext4_journal_stop ext4_put_nojournal(handle) ref_cnt = (unsigned long)handle BUG_ON(ref_cnt == 0) ---> BUG_ON The lock held by ext4_convert_inline_data is xattr_sem, but the lock held by generic_perform_write is i_rwsem. Therefore, the two locks can be concurrent. To solve above issue, we add inode_lock() for ext4_convert_inline_data(). At the same time, move ext4_convert_inline_data() in front of ext4_punch_hole(), remove similar handling from ext4_punch_hole().

Show More

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential double free in create_var_ref() In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error ... In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential double free in create_var_ref() In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error handling, which frees the fields and the variable itself. This results in double free of the fields which are already freed in the previous function. Fix this by storing NULL to the corresponding fields when they are freed in init_var_ref().

Show More

In the Linux kernel, the following vulnerability has been resolved: block: Fix potential deadlock in blk_ia_range_sysfs_show() When being read, a sysfs attribute is already protected against removal with the kobject node active reference counter. As a result, in blk_ia_range_sysfs_show(), there is no need to take the queue sysfs lock when reading the value of a range attribute. Using the queue sysfs lock in this function creates a potential deadlock situation with the disk removal, something t ... In the Linux kernel, the following vulnerability has been resolved: block: Fix potential deadlock in blk_ia_range_sysfs_show() When being read, a sysfs attribute is already protected against removal with the kobject node active reference counter. As a result, in blk_ia_range_sysfs_show(), there is no need to take the queue sysfs lock when reading the value of a range attribute. Using the queue sysfs lock in this function creates a potential deadlock situation with the disk removal, something that a lockdep signals with a splat when the device is removed: [ 760.703551] Possible unsafe locking scenario: [ 760.703551] [ 760.703554] CPU0 CPU1 [ 760.703556] ---- ---- [ 760.703558] lock(&q->sysfs_lock); [ 760.703565] lock(kn->active#385); [ 760.703573] lock(&q->sysfs_lock); [ 760.703579] lock(kn->active#385); [ 760.703587] [ 760.703587] *** DEADLOCK *** Solve this by removing the mutex_lock()/mutex_unlock() calls from blk_ia_range_sysfs_show().

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix potential integer multiplication overflow errors When multiplying of different types, an overflow is possible even when storing the result in a larger type. This is because the conversion is done after the multiplication. So arithmetic overflow and thus in incorrect value is possible. Correct an instance of this in the inter packet delay calculation. Fix by ensuring one of the operands is u64 which will promot ... In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix potential integer multiplication overflow errors When multiplying of different types, an overflow is possible even when storing the result in a larger type. This is because the conversion is done after the multiplication. So arithmetic overflow and thus in incorrect value is possible. Correct an instance of this in the inter packet delay calculation. Fix by ensuring one of the operands is u64 which will promote the other to u64 as well ensuring no overflow.

Show More

In the Linux kernel, the following vulnerability has been resolved: lib/string_helpers: fix not adding strarray to device's resource list Add allocated strarray to device's resource list. This is a must to automatically release strarray when the device disappears. Without this fix we have a memory leak in the few drivers which use devm_kasprintf_strarray().

In the Linux kernel, the following vulnerability has been resolved: md: Don't set mddev private to NULL in raid0 pers->free In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mdd ... In the Linux kernel, the following vulnerability has been resolved: md: Don't set mddev private to NULL in raid0 pers->free In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem.

Show More

In the Linux kernel, the following vulnerability has been resolved: um: Fix out-of-bounds read in LDT setup syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes. ================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump ... In the Linux kernel, the following vulnerability has been resolved: um: Fix out-of-bounds read in LDT setup syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes. ================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump_stack+0x3a/0x43 dump_stack_lvl+0x1f/0x27 print_report.cold+0xdb/0xf81 kasan_report+0x119/0x1f0 kasan_check_range+0x3a3/0x440 memcpy+0x52/0x140 syscall_stub_data+0x70/0xe0 write_ldt_entry+0xac/0x190 init_new_ldt+0x515/0x960 init_new_context+0x2c4/0x4d0 mm_init.constprop.0+0x5ed/0x760 mm_alloc+0x118/0x170 0x60033f48 do_one_initcall+0x1d7/0x860 0x60003e7b kernel_init+0x6e/0x3d4 new_thread_handler+0x1e7/0x2c0 The buggy address belongs to stack of task swapper/1 and is located at offset 64 in frame: init_new_ldt+0x0/0x960 This frame has 2 objects: [32, 40) 'addr' [64, 80) 'desc' ==================================================================

Show More

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function.

In the Linux kernel, the following vulnerability has been resolved: usb: usbip: fix a refcount leak in stub_probe() usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails after that, usb_put_dev() needs to be called to release the reference. Fix this by moving usb_put_dev() to sdev_free error path handling. Find this by code review.

In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 32bit overflow issue The value of timer_cycle_us can be 0 due to 32bit overflow. For eg:- If we assign the counter value "0xfff" for computing maxval. This patch fixes this issue by appending ULL to 1024, so that it is promoted to 64bit. This patch also fixes the warning message, 'watchdog: Invalid min and max timeout values, resetting to 0!'.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release the refcount in error case. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: md: fix double free of io_acct_set bioset Now io_acct_set is alloc and free in personality. Remove the codes that free io_acct_set in md_free and md_stop.

In the Linux kernel, the following vulnerability has been resolved: soc: rockchip: Fix refcount leak in rockchip_grf_init of_find_matching_node_and_match returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_fill_super If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 ... In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_fill_super If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0 [<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] unreferenced object 0xffff8881bd7f0000 (size 65536): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffff858579ba>] kmalloc_order+0xda/0x110 [<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130 [<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0 [<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem.

Show More

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix potential NULL pointer dereference If sd_probe() sees an early error before sdkp->device is initialized, sd_zbc_release_disk() is called. This causes a NULL pointer dereference when sd_is_zoned() is called inside that function. Avoid this by removing the call to sd_zbc_release_disk() in sd_probe() error path. This change is safe and does not result in zone information memory leakage because the zone information ... In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix potential NULL pointer dereference If sd_probe() sees an early error before sdkp->device is initialized, sd_zbc_release_disk() is called. This causes a NULL pointer dereference when sd_is_zoned() is called inside that function. Avoid this by removing the call to sd_zbc_release_disk() in sd_probe() error path. This change is safe and does not result in zone information memory leakage because the zone information for a zoned disk is allocated only when sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set, resulting in sd_disk_release() being called when needed to cleanup a disk zone information using sd_zbc_release_disk().

Show More

In the Linux kernel, the following vulnerability has been resolved: rtc: mt6397: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: tipc: check attribute length for bearer name syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/p ... In the Linux kernel, the following vulnerability has been resolved: tipc: check attribute length for bearer name syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50 _printk+0x18d/0x1cf kernel/printk/printk.c:2293 tipc_enable_bearer net/tipc/bearer.c:371 [inline] __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] - Do sanity check the attribute length for TIPC_NLA_BEARER_NAME. - Do not use 'illegal name' in printing message.

Show More

In the Linux kernel, the following vulnerability has been resolved: watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() in some error paths.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix deadlock in __device_attach In __device_attach function, The lock holding logic is as follows: ... __device_attach device_lock(dev) // get lock dev async_schedule_dev(__device_attach_async_helper, dev); // func async_schedule_node async_schedule_node_domain(func) entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC); /* when fail or work limit, sync to execute func, but __device ... In the Linux kernel, the following vulnerability has been resolved: driver core: fix deadlock in __device_attach In __device_attach function, The lock holding logic is as follows: ... __device_attach device_lock(dev) // get lock dev async_schedule_dev(__device_attach_async_helper, dev); // func async_schedule_node async_schedule_node_domain(func) entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC); /* when fail or work limit, sync to execute func, but __device_attach_async_helper will get lock dev as well, which will lead to A-A deadlock. */ if (!entry || atomic_read(&entry_count) > MAX_WORK) { func; else queue_work_node(node, system_unbound_wq, &entry->work) device_unlock(dev) As shown above, when it is allowed to do async probes, because of out of memory or work limit, async work is not allowed, to do sync execute instead. it will lead to A-A deadlock because of __device_attach_async_helper getting lock dev. To fix the deadlock, move the async_schedule_dev outside device_lock, as we can see, in async_schedule_node_domain, the parameter of queue_work_node is system_unbound_wq, so it can accept concurrent operations. which will also not change the code logic, and will not lead to deadlock.

Show More

In the Linux kernel, the following vulnerability has been resolved: firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by calling kobject_put().

In the Linux kernel, the following vulnerability has been resolved: amt: fix possible memory leak in amt_rcv() If an amt receives packets and it finds socket. If it can't find a socket, it should free a received skb. But it doesn't. So, a memory leak would possibly occur.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry() The "fsp->location" variable comes from user via ethtool_get_rxnfc(). Check that it is valid to prevent an out of bounds read.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register(). We don't need the device node after it. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix reference count leak in smb_check_perm_dacl() The issue happens in a specific path in smb_check_perm_dacl(). When "id" and "uid" have the same value, the function simply jumps out of the loop without decrementing the reference count of the object "posix_acls", which is increased by get_acl() earlier. This may result in memory leaks. Fix it by decreasing the reference count of "posix_acls" before jumping to label "c ... In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix reference count leak in smb_check_perm_dacl() The issue happens in a specific path in smb_check_perm_dacl(). When "id" and "uid" have the same value, the function simply jumps out of the loop without decrementing the reference count of the object "posix_acls", which is increased by get_acl() earlier. This may result in memory leaks. Fix it by decreasing the reference count of "posix_acls" before jumping to label "check_access_bits".

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq() The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: memleak flow rule from commit path Abort path release flow rule object, however, commit path does not. Update code to destroy these objects before releasing the transaction.

In the Linux kernel, the following vulnerability has been resolved: ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: powerpc/papr_scm: don't requests stats with '0' sized stats buffer Sachin reported [1] that on a POWER-10 lpar he is seeing a kernel panic being reported with vPMEM when papr_scm probe is being called. The panic is of the form below and is observed only with following option disabled(profile) for the said LPAR 'Enable Performance Information Collection' in the HMC: Kernel attempted to write user page (1c) - exploit attempt? ... In the Linux kernel, the following vulnerability has been resolved: powerpc/papr_scm: don't requests stats with '0' sized stats buffer Sachin reported [1] that on a POWER-10 lpar he is seeing a kernel panic being reported with vPMEM when papr_scm probe is being called. The panic is of the form below and is observed only with following option disabled(profile) for the said LPAR 'Enable Performance Information Collection' in the HMC: Kernel attempted to write user page (1c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on write at 0x0000001c Faulting instruction address: 0xc008000001b90844 Oops: Kernel access of bad area, sig: 11 [#1] <snip> NIP [c008000001b90844] drc_pmem_query_stats+0x5c/0x270 [papr_scm] LR [c008000001b92794] papr_scm_probe+0x2ac/0x6ec [papr_scm] Call Trace: 0xc00000000941bca0 (unreliable) papr_scm_probe+0x2ac/0x6ec [papr_scm] platform_probe+0x98/0x150 really_probe+0xfc/0x510 __driver_probe_device+0x17c/0x230 <snip> ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception On investigation looks like this panic was caused due to a 'stat_buffer' of size==0 being provided to drc_pmem_query_stats() to fetch all performance stats-ids of an NVDIMM. However drc_pmem_query_stats() shouldn't have been called since the vPMEM NVDIMM doesn't support and performance stat-id's. This was caused due to missing check for 'p->stat_buffer_len' at the beginning of papr_scm_pmu_check_events() which indicates that the NVDIMM doesn't support performance-stats. Fix this by introducing the check for 'p->stat_buffer_len' at the beginning of papr_scm_pmu_check_events(). [1] https://lore.kernel.org/all/[email protected]

Show More

In the Linux kernel, the following vulnerability has been resolved: net: altera: Fix refcount leak in altera_tse_mdio_create Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix a data-race in unix_dgram_peer_wake_me(). unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s lock held and check if its receive queue is full. Here we need to use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise KCSAN will report a data-race.