Vulnerabilities (CVE)

A security flaw has been discovered in Intelbras VIP 3260 Z IA 2.840.00IB005.0.T. Affected by this vulnerability is an unknown functionality of the file /OutsideCmd. The manipulation results in weak password recovery. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. It is recommended to upgrade the affected component.

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: ensure skb headroom before skb_push This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is less than needed (typically 110 - 94 = 16 bytes).

A Server-Side Template Injection (SSTI) vulnerability in the Freemarker template engine of Datart v1.0.0-rc.3 allows authenticated attackers to execute arbitrary code via injecting crafted Freemarker template syntax into the SQL script field.

A vulnerability was identified in vichan-devel vichan up to 5.1.5. This vulnerability affects unknown code of the file inc/mod/pages.php of the component Password Change Handler. The manipulation of the argument Password leads to unverified password change. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

LightLLM version 1.1.0 and prior contain an unauthenticated remote code execution vulnerability in PD (prefill-decode) disaggregation mode. The PD master node exposes WebSocket endpoints that receive binary frames and pass the data directly to pickle.loads() without authentication or validation. A remote attacker who can reach the PD master can send a crafted payload to achieve arbitrary code execution.

The Micca KE700 system contains flawed resynchronization logic and is vulnerable to replay attacks. This attack requires sending two previously captured codes in a specific sequence. As a result, the system can be forced to accept previously used (stale) rolling codes and execute a command. Successful exploitation allows an attacker to clone the alarm key. This grants the attacker unauthorized access to the vehicle to unlock or lock the doors.

Glory RBG-100 recycler systems using the ISPK-08 software component contain hard-coded operating system credentials that allow remote authentication to the underlying Linux system. Multiple local user accounts, including accounts with administrative privileges, were found to have fixed, embedded passwords. An attacker with network access to exposed services such as SSH may authenticate using these credentials and gain unauthorized access to the system. Successful exploitation allows remote acces ... Glory RBG-100 recycler systems using the ISPK-08 software component contain hard-coded operating system credentials that allow remote authentication to the underlying Linux system. Multiple local user accounts, including accounts with administrative privileges, were found to have fixed, embedded passwords. An attacker with network access to exposed services such as SSH may authenticate using these credentials and gain unauthorized access to the system. Successful exploitation allows remote access with elevated privileges and may result in full system compromise.

Show More

Emails sent by pretix can utilize placeholders that will be filled with customer data. For example, when {name} is used in an email template, it will be replaced with the buyer's name for the final email. This mechanism contained two security-relevant bugs: * It was possible to exfiltrate information about the pretix system through specially crafted placeholder names such as {{event.__init__.__code__.co_filename}}. This way, an attacker with the ability to control email templates (u ... Emails sent by pretix can utilize placeholders that will be filled with customer data. For example, when {name} is used in an email template, it will be replaced with the buyer's name for the final email. This mechanism contained two security-relevant bugs: * It was possible to exfiltrate information about the pretix system through specially crafted placeholder names such as {{event.__init__.__code__.co_filename}}. This way, an attacker with the ability to control email templates (usually every user of the pretix backend) could retrieve sensitive information from the system configuration, including even database passwords or API keys. pretix does include mechanisms to prevent the usage of such malicious placeholders, however due to a mistake in the code, they were not fully effective for the email subject. * Placeholders in subjects and plain text bodies of emails were wrongfully evaluated twice. Therefore, if the first evaluation of a placeholder again contains a placeholder, this second placeholder was rendered. This allows the rendering of placeholders controlled by the ticket buyer, and therefore the exploitation of the first issue as a ticket buyer. Luckily, the only buyer-controlled placeholder available in pretix by default (that is not validated in a way that prevents the issue) is {invoice_company}, which is very unusual (but not impossible) to be contained in an email subject template. In addition to broadening the attack surface of the first issue, this could theoretically also leak information about an order to one of the attendees within that order. However, we also consider this scenario very unlikely under typical conditions. Out of caution, we recommend that you rotate all passwords and API keys contained in your pretix.cfg https://docs.pretix.eu/self-hosting/config/  file.

Show More

In the Linux kernel, the following vulnerability has been resolved: mm, shmem: prevent infinite loop on truncate race When truncating a large swap entry, shmem_free_swap() returns 0 when the entry's index doesn't match the given index due to lookup alignment. The failure fallback path checks if the entry crosses the end border and aborts when it happens, so truncate won't erase an unexpected entry or range. But one scenario was ignored. When `index` points to the middle of a large swap entr ... In the Linux kernel, the following vulnerability has been resolved: mm, shmem: prevent infinite loop on truncate race When truncating a large swap entry, shmem_free_swap() returns 0 when the entry's index doesn't match the given index due to lookup alignment. The failure fallback path checks if the entry crosses the end border and aborts when it happens, so truncate won't erase an unexpected entry or range. But one scenario was ignored. When `index` points to the middle of a large swap entry, and the large swap entry doesn't go across the end border, find_get_entries() will return that large swap entry as the first item in the batch with `indices[0]` equal to `index`. The entry's base index will be smaller than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the "base < index" check. The code will then call shmem_confirm_swap(), get the order, check if it crosses the END boundary (which it doesn't), and retry with the same index. The next iteration will find the same entry again at the same index with same indices, leading to an infinite loop. Fix this by retrying with a round-down index, and abort if the index is smaller than the truncate range.

Show More

The WhatsApp bridge component in Nanobot binds the WebSocket server to all network interfaces (0.0.0.0) on port 3001 by default and does not require authentication for incoming connections. An unauthenticated remote attacker with network access to the bridge can connect to the WebSocket server to hijack the WhatsApp session. This allows the attacker to send messages on behalf of the user, intercept all incoming messages and media in real-time, and capture authentication QR codes.

In the Linux kernel, the following vulnerability has been resolved: spi: tegra: Fix a memory leak in tegra_slink_probe() In tegra_slink_probe(), when platform_get_irq() fails, it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch chan ... In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF.

Show More

In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free ... In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free when __linkwatch_run_queue() tries to call netdev_unlock_ops() on the already-freed device. Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in netdev_run_todo() before kobject_put() would not work, because netdev_lock_ops() is conditional - it only locks when netdev_need_ops_lock() returns true. If the device doesn't require ops_lock, linkwatch won't hold any lock, and netdev_run_todo() acquiring the lock won't provide synchronization. Fix this by moving __dev_put() from linkwatch_do_dev() to its callers. The device reference logically pairs with de-listing the device, so it's reasonable for the caller that did the de-listing to release it. This allows placing __dev_put() after all device accesses are complete, preventing UAF. The bug can be reproduced by adding mdelay(2000) after linkwatch_do_dev() in __linkwatch_run_queue(), then running: ip tuntap add mode tun name tun_test ip link set tun_test up ip link set tun_test carrier off ip link set tun_test carrier on sleep 0.5 ip tuntap del mode tun name tun_test KASAN report: ================================================================== BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline] BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123 CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events_unbound linkwatch_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x156/0x4c9 mm/kasan/report.c:482 kasan_report+0xdf/0x1a0 mm/kasan/report.c:595 netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] netdev_unlock_ops include/net/netdev_lock.h:47 [inline] __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304 process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x5da/0xe40 kernel/workqueue.c:3421 kthread+0x3b3/0x730 kernel/kthread.c:463 ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> ==================================================================

Show More

In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer check in IRQ handler Now that all other accesses to curr_xfer are done under the lock, protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the spinlock. Without this protection, the following race can occur: CPU0 (ISR thread) CPU1 (timeout path) ---------------- ------------------- if (!tqspi->curr_xfer) // sees non-NULL ... In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer check in IRQ handler Now that all other accesses to curr_xfer are done under the lock, protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the spinlock. Without this protection, the following race can occur: CPU0 (ISR thread) CPU1 (timeout path) ---------------- ------------------- if (!tqspi->curr_xfer) // sees non-NULL spin_lock() tqspi->curr_xfer = NULL spin_unlock() handle_*_xfer() spin_lock() t = tqspi->curr_xfer // NULL! ... t->len ... // NULL dereference! With this patch, all curr_xfer accesses are now properly synchronized. Although all accesses to curr_xfer are done under the lock, in tegra_qspi_isr_thread() it checks for NULL, releases the lock and reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer(). There is a potential for an update in between, which could cause a NULL pointer dereference. To handle this, add a NULL check inside the handlers after acquiring the lock. This ensures that if the timeout path has already cleared curr_xfer, the handler will safely return without dereferencing the NULL pointer.

Show More

The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges. First identified on Nissan Leaf ZE1 m ... The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges. First identified on Nissan Leaf ZE1 manufactured in 2020.

Show More

Missing Authentication for Critical Function vulnerability in TUBITAK BILGEM Software Technologies Research Institute Liderahenk allows Remote Code Inclusion.This issue affects Liderahenk: from 3.0.0 to 3.3.1 before 3.5.0.

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: preserve error state in block data length handler When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX, the length handler sets the state to IMX_I2C_STATE_FAILED. However, i2c_imx_master_isr() unconditionally overwrites this with IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns buffers and crashes the system. Guard the state transition to preserve error states set by the l ... In the Linux kernel, the following vulnerability has been resolved: i2c: imx: preserve error state in block data length handler When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX, the length handler sets the state to IMX_I2C_STATE_FAILED. However, i2c_imx_master_isr() unconditionally overwrites this with IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns buffers and crashes the system. Guard the state transition to preserve error states set by the length handler.

Show More

StorageGRID (formerly StorageGRID Webscale) versions prior to 11.9.0.12 and 12.0.0.4 with Single Sign-on enabled and configured to use Microsoft Entra ID (formerly Azure AD) as an IdP are susceptible to a Server-Side Request Forgery (SSRF) vulnerability. Successful exploit could allow an authenticated attacker with low privileges to delete configuration data or deny access to some resources.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't WARN for connections on invalid channels It's not clear (to me) how exactly syzbot managed to hit this, but it seems conceivable that e.g. regulatory changed and has disabled a channel between scanning (channel is checked to be usable by cfg80211_get_ies_channel_number) and connecting on the channel later. With one scenario that isn't covered elsewhere described above, the warning isn't good, replace it ... In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't WARN for connections on invalid channels It's not clear (to me) how exactly syzbot managed to hit this, but it seems conceivable that e.g. regulatory changed and has disabled a channel between scanning (channel is checked to be usable by cfg80211_get_ies_channel_number) and connecting on the channel later. With one scenario that isn't covered elsewhere described above, the warning isn't good, replace it with a (more informative) error message.

Show More

IBM Financial Transaction Manager for ACH Services and Check Services for Multi-Platform 3.0.0.0 through 3.0.5.4 Interim Fix 027 IBM Financial Transaction Manager for Check Services v3 (Multiplatforms) is vulnerable to cross-site scripting. This vulnerability allows an unauthenticated attacker to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session.

A local privilege-escalation vulnerability has been discovered in the HPE Aruba Networking ClearPass OnGuard Software for Linux. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges.

The affected products are vulnerable to an unauthenticated API endpoint exposure, which may allow an attacker to remotely change the "forgot password" recovery email address.

The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to unauthorized arbitrary shortcode execution in all versions up to, and including, 1.70.4. This is due to a missing capability check on the `siteorigin_widget_preview_widget_action()` function which is registered via the `wp_ajax_so_widgets_preview` AJAX action. The function only verifies a nonce (`widgets_action`) but does not check user capabilities. This makes it possible for authenticated attackers, with Subscriber-level acces ... The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to unauthorized arbitrary shortcode execution in all versions up to, and including, 1.70.4. This is due to a missing capability check on the `siteorigin_widget_preview_widget_action()` function which is registered via the `wp_ajax_so_widgets_preview` AJAX action. The function only verifies a nonce (`widgets_action`) but does not check user capabilities. This makes it possible for authenticated attackers, with Subscriber-level access and above, to execute arbitrary shortcodes by invoking the `SiteOrigin_Widget_Editor_Widget` via the preview endpoint. The required nonce is exposed on the public frontend when the Post Carousel widget is present on a page, embedded in the `data-ajax-url` HTML attribute.

Show More

The Private Comment plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Label text' setting in all versions up to, and including, 0.0.4. This is due to insufficient input sanitization and output escaping on the plugin's label text option. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installation ... The Private Comment plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Label text' setting in all versions up to, and including, 0.0.4. This is due to insufficient input sanitization and output escaping on the plugin's label text option. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

Show More

The Display During Conditional Shortcode plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘message’ parameter in all versions up to, and including, 1.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Product Addons for Woocommerce – Product Options with Custom Fields plugin for WordPress is vulnerable to Code Injection in all versions up to, and including, 3.1.0. This is due to insufficient input validation of the 'operator' field in conditional logic rules within the evalConditions() function, which passes unsanitized user input directly to PHP's eval() function. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to inject and execute arbitrary ... The Product Addons for Woocommerce – Product Options with Custom Fields plugin for WordPress is vulnerable to Code Injection in all versions up to, and including, 3.1.0. This is due to insufficient input validation of the 'operator' field in conditional logic rules within the evalConditions() function, which passes unsanitized user input directly to PHP's eval() function. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to inject and execute arbitrary PHP code on the server via the conditional logic 'operator' parameter when saving addon form field rules.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Disable MMIO access during SMU Mode 1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access MMIO registers during this window (e.g., from interrupt handlers or other driver threads) can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, set the `no_hw_access` flag to true immediately after trigg ... In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Disable MMIO access during SMU Mode 1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access MMIO registers during this window (e.g., from interrupt handlers or other driver threads) can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, set the `no_hw_access` flag to true immediately after triggering the reset. This signals other driver components to skip register accesses while the device is offline. A memory barrier `smp_mb()` is added to ensure the flag update is globally visible to all cores before the driver enters the sleep/wait state. (cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4)

Show More

Improper Input Validation vulnerability in Apache Tomcat. Tomcat did not limit HTTP/0.9 requests to the GET method. If a security constraint was configured to allow HEAD requests to a URI but deny GET requests, the user could bypass that constraint on GET requests by sending a (specification invalid) HEAD request using HTTP/0.9. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0.M1 through 9.0.112. Older, EOL versions are also af ... Improper Input Validation vulnerability in Apache Tomcat. Tomcat did not limit HTTP/0.9 requests to the GET method. If a security constraint was configured to allow HEAD requests to a URI but deny GET requests, the user could bypass that constraint on GET requests by sending a (specification invalid) HEAD request using HTTP/0.9. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0.M1 through 9.0.112. Older, EOL versions are also affected. Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fixes the issue.

Show More

The Community Events plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'ce_venue_name' parameter in all versions up to, and including, 1.5.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The VK All in One Expansion Unit plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'vkExUnit_sns_title' parameter in all versions up to, and including, 9.112.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The WPNakama – Team and multi-Client Collaboration, Editorial and Project Management plugin for WordPress is vulnerable to SQL Injection via the 'order' parameter of the '/wp-json/WPNakama/v1/boards' REST API endpoint in all versions up to, and including, 0.6.5. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing ... The WPNakama – Team and multi-Client Collaboration, Editorial and Project Management plugin for WordPress is vulnerable to SQL Injection via the 'order' parameter of the '/wp-json/WPNakama/v1/boards' REST API endpoint in all versions up to, and including, 0.6.5. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

Show More

The Complianz – GDPR/CCPA Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's cmplz-accept-link shortcode in all versions up to, and including, 7.4.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

Improper Input Validation vulnerability. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected. Tomcat did not validate that the host name provided via the SNI extension was the same as the host name provided in the HTTP host header field. If Tomcat was configured wi ... Improper Input Validation vulnerability. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected. Tomcat did not validate that the host name provided via the SNI extension was the same as the host name provided in the HTTP host header field. If Tomcat was configured with more than one virtual host and the TLS configuration for one of those hosts did not require client certificate authentication but another one did, it was possible for a client to bypass the client certificate authentication by sending different host names in the SNI extension and the HTTP host header field. The vulnerability only applies if client certificate authentication is only enforced at the Connector. It does not apply if client certificate authentication is enforced at the web application. Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fix the issue.

Show More

The YayMail – WooCommerce Email Customizer plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the `yaymail_import_state` AJAX action in all versions up to, and including, 4.3.2. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrato ... The YayMail – WooCommerce Email Customizer plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the `yaymail_import_state` AJAX action in all versions up to, and including, 4.3.2. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site.

Show More

The WP Plugin Info Card plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 6.2.0. This is due to missing nonce validation in the ajax_save_custom_plugin() function, which is disabled by prefixing the check with 'false &&'. This makes it possible for unauthenticated attackers to create or modify custom plugin entries via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

The YayMail - WooCommerce Email Customizer plugin for WordPress is vulnerable to unauthorized plugin installation and activation due to missing capability checks on the 'yaymail_install_yaysmtp' AJAX action and `/yaymail/v1/addons/activate` REST endpoint in all versions up to, and including, 4.3.2. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to install and activate the YaySMTP plugin.

Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat. When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed. This issue affects Apache Tomcat Native:  from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9. ... Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat. When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed. This issue affects Apache Tomcat Native:  from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114. The following versions were EOL at the time the CVE was created but are known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected. Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue. Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue.

Show More

The Business Directory Plugin for WordPress is vulnerable to authorization bypass due to a missing authorization check in all versions up to, and including, 6.4.20. This makes it possible for unauthenticated attackers to modify arbitrary listings, including changing titles, content, and email addresses, by directly referencing the listing ID in crafted requests to the wpbdp_ajax AJAX action.

The Taskbuilder – WordPress Project Management & Task Management plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.0.2. This is due to missing authorization checks on the project and task comment submission functions (AJAX actions: wppm_submit_proj_comment and wppm_submit_task_comment). This makes it possible for authenticated attackers, with subscriber-level access and above, to create comments on any project or task (including private projects t ... The Taskbuilder – WordPress Project Management & Task Management plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.0.2. This is due to missing authorization checks on the project and task comment submission functions (AJAX actions: wppm_submit_proj_comment and wppm_submit_task_comment). This makes it possible for authenticated attackers, with subscriber-level access and above, to create comments on any project or task (including private projects they cannot view or are not assigned to), and inject arbitrary HTML and CSS via the insufficiently sanitized comment_body parameter.

Show More

The Tickera – Sell Tickets & Manage Events plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'wp_ajax_change_ticket_status' AJAX endpoint in all versions up to, and including, 3.5.6.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update post/event statuses.