Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table() If per_time_scales[i] or per_time_gains[i] kcalloc fails in the for loop of iio_gts_build_avail_scale_table(), the err_free_out will fail to call kfree() each time when i is reduced to 0, so all the per_time_scales[0] and per_time_gains[0] will not be freed, which will cause memory leaks. Fix it by checking if i >= 0.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't leak a link on AP removal Release the link mapping resource in AP removal. This impacted devices that do not support the MLD API (9260 and down). On those devices, we couldn't start the AP again after the AP has been already started and stopped.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Be stricter about IO mapping flags The current panthor_device_mmap_io() implementation has two issues: 1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET, panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear VM_MAYWRITE. That means userspace can use mprotect() to make the mapping writable later on. This is a classic Linux driver gotcha. I don't think this actually has any impact in ... In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Be stricter about IO mapping flags The current panthor_device_mmap_io() implementation has two issues: 1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET, panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear VM_MAYWRITE. That means userspace can use mprotect() to make the mapping writable later on. This is a classic Linux driver gotcha. I don't think this actually has any impact in practice: When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and when the GPU is not powered, the dummy_latest_flush page provided by the driver is deliberately designed to not do any flushes, so the only thing writing to the dummy_latest_flush could achieve would be to make *more* flushes happen. 2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are mappings without the VM_SHARED flag). MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has copy-on-write semantics, which for VM_PFNMAP are semi-supported but fairly cursed. In particular, in such a mapping, the driver can only install PTEs during mmap() by calling remap_pfn_range() (because remap_pfn_range() wants to **store the physical address of the mapped physical memory into the vm_pgoff of the VMA**); installing PTEs later on with a fault handler (as panthor does) is not supported in private mappings, and so if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when it hits a BUG() check. Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for the FLUSH_ID don't make sense). Reproducers for both scenarios are in the notes of my patch on the mailing list; I tested that these bugs exist on a Rock 5B machine. Note that I only compile-tested the patch, I haven't tested it; I don't have a working kernel build setup for the test machine yet. Please test it before applying it.

Show More

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a km ... In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2 ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again ... In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized.

Show More

In the Linux kernel, the following vulnerability has been resolved: media: mgb4: protect driver against spectre Frequency range is set from sysfs via frequency_range_store(), being vulnerable to spectre, as reported by smatch: drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r] drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set' Fix it.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't ca ... In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability Sometimes during hotplug scenario or suspend/resume scenario encoder is not always initialized when intel_hdcp_get_capability add a check to avoid kernel null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in hdcp2_get_capability Add encoder check in intel_hdcp2_get_capability to avoid null pointer error.

In the Linux kernel, the following vulnerability has been resolved: slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof 'modprobe slub_kunit' will have a warning as shown below. The root cause is that __kmalloc_cache_noprof was directly used, which resulted in no alloc_tag being allocated. This caused current->alloc_tag to be null, leading to a warning in alloc_tag_add_check. Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically within lib/slub_kunit.c, which is t ... In the Linux kernel, the following vulnerability has been resolved: slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof 'modprobe slub_kunit' will have a warning as shown below. The root cause is that __kmalloc_cache_noprof was directly used, which resulted in no alloc_tag being allocated. This caused current->alloc_tag to be null, leading to a warning in alloc_tag_add_check. Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically within lib/slub_kunit.c, which is the only user of this internal slub function outside kmalloc implementation itself. [58162.947016] WARNING: CPU: 2 PID: 6210 at ./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.957721] Call trace: [58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.958286] __kmalloc_cache_noprof+0x14c/0x344 [58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit] [58162.959045] kunit_try_run_case+0x74/0x184 [kunit] [58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [58162.959841] kthread+0x10c/0x118 [58162.960093] ret_from_fork+0x10/0x20 [58162.960363] ---[ end trace 0000000000000000 ]---

Show More

In the Linux kernel, the following vulnerability has been resolved: ice: fix crash on probe for DPLL enabled E810 LOM The E810 Lan On Motherboard (LOM) design is vendor specific. Intel provides the reference design, but it is up to vendor on the final product design. For some cases, like Linux DPLL support, the static values defined in the driver does not reflect the actual LOM design. Current implementation of dpll pins is causing the crash on probe of the ice driver for such DPLL enabled E81 ... In the Linux kernel, the following vulnerability has been resolved: ice: fix crash on probe for DPLL enabled E810 LOM The E810 Lan On Motherboard (LOM) design is vendor specific. Intel provides the reference design, but it is up to vendor on the final product design. For some cases, like Linux DPLL support, the static values defined in the driver does not reflect the actual LOM design. Current implementation of dpll pins is causing the crash on probe of the ice driver for such DPLL enabled E810 LOM designs: WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330 ... Call Trace: <TASK> ? __warn+0x83/0x130 ? dpll_pin_get+0x2c4/0x330 ? report_bug+0x1b7/0x1d0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? dpll_pin_get+0x117/0x330 ? dpll_pin_get+0x2c4/0x330 ? dpll_pin_get+0x117/0x330 ice_dpll_get_pins.isra.0+0x52/0xe0 [ice] ... The number of dpll pins enabled by LOM vendor is greater than expected and defined in the driver for Intel designed NICs, which causes the crash. Prevent the crash and allow generic pin initialization within Linux DPLL subsystem for DPLL enabled E810 LOM designs. Newly designed solution for described issue will be based on "per HW design" pin initialization. It requires pin information dynamically acquired from the firmware and is already in progress, planned for next-tree only.

Show More

In the Linux kernel, the following vulnerability has been resolved: mptcp: init: protect sched with rcu_read_lock Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT creates this splat when an MPTCP socket is created: ============================= WARNING: suspicious RCU usage 6.12.0-rc2+ #11 Not tainted ----------------------------- net/mptcp/sched.c:44 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = ... In the Linux kernel, the following vulnerability has been resolved: mptcp: init: protect sched with rcu_read_lock Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT creates this splat when an MPTCP socket is created: ============================= WARNING: suspicious RCU usage 6.12.0-rc2+ #11 Not tainted ----------------------------- net/mptcp/sched.c:44 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by mptcp_connect/176. stack backtrace: CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7)) mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1)) ? sock_init_data_uid (arch/x86/include/asm/atomic.h:28) inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386) ? __sock_create (include/linux/rcupdate.h:347 (discriminator 1)) __sock_create (net/socket.c:1576) __sys_socket (net/socket.c:1671) ? __pfx___sys_socket (net/socket.c:1712) ? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1)) __x64_sys_socket (net/socket.c:1728) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) That's because when the socket is initialised, rcu_read_lock() is not used despite the explicit comment written above the declaration of mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the warning.

Show More

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: imx8ulp: correct the flexspi compatible string The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Co ... In the Linux kernel, the following vulnerability has been resolved: arm64: dts: imx8ulp: correct the flexspi compatible string The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69 [ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT) [ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64 [ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64 [ 1.168060] sp : ffff80008002b2a0 [ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000 [ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000 [ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0 [ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff [ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002 [ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00 [ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80 [ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001 [ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6 [ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92 [ 1.246267] Call trace: [ 1.248824] nxp_fspi_exec_op+0xb04/0xb64 [ 1.253031] spi_mem_exec_op+0x3a0/0x430 [ 1.257139] spi_nor_read_id+0x80/0xcc [ 1.261065] spi_nor_scan+0x1ec/0xf10 [ 1.264901] spi_nor_probe+0x108/0x2fc [ 1.268828] spi_mem_probe+0x6c/0xbc [ 1.272574] spi_probe+0x84/0xe4 [ 1.275958] really_probe+0xbc/0x29c [ 1.279713] __driver_probe_device+0x78/0x12c [ 1.284277] driver_probe_device+0xd8/0x15c [ 1.288660] __device_attach_driver+0xb8/0x134 [ 1.293316] bus_for_each_drv+0x88/0xe8 [ 1.297337] __device_attach+0xa0/0x190 [ 1.301353] device_initial_probe+0x14/0x20 [ 1.305734] bus_probe_device+0xac/0xb0 [ 1.309752] device_add+0x5d0/0x790 [ 1.313408] __spi_add_device+0x134/0x204 [ 1.317606] of_register_spi_device+0x3b4/0x590 [ 1.322348] spi_register_controller+0x47c/0x754 [ 1.327181] devm_spi_register_controller+0x4c/0xa4 [ 1.332289] nxp_fspi_probe+0x1cc/0x2b0 [ 1.336307] platform_probe+0x68/0xc4 [ 1.340145] really_probe+0xbc/0x29c [ 1.343893] __driver_probe_device+0x78/0x12c [ 1.348457] driver_probe_device+0xd8/0x15c [ 1.352838] __driver_attach+0x90/0x19c [ 1.356857] bus_for_each_dev+0x7c/0xdc [ 1.360877] driver_attach+0x24/0x30 [ 1.364624] bus_add_driver+0xe4/0x208 [ 1.368552] driver_register+0x5c/0x124 [ 1.372573] __platform_driver_register+0x28/0x34 [ 1.377497] nxp_fspi_driver_init+0x1c/0x28 [ 1.381888] do_one_initcall+0x80/0x1c8 [ 1.385908] kernel_init_freeable+0x1c4/0x28c [ 1.390472] kernel_init+0x20/0x1d8 [ 1.394138] ret_from_fork+0x10/0x20 [ 1.397885] ---[ end trace 0000000000000000 ]--- [ 1.407908] ------------[ cut here ]------------

Show More

In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: fix bounds checker error in dapm_widget_list_create The widgets array in the snd_soc_dapm_widget_list has a __counted_by attribute attached to it, which points to the num_widgets variable. This attribute is used in bounds checking, and if it is not set before the array is filled, then the bounds sanitizer will issue a warning or a kernel panic if CONFIG_UBSAN_TRAP is set. This patch sets the size of the widgets li ... In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: fix bounds checker error in dapm_widget_list_create The widgets array in the snd_soc_dapm_widget_list has a __counted_by attribute attached to it, which points to the num_widgets variable. This attribute is used in bounds checking, and if it is not set before the array is filled, then the bounds sanitizer will issue a warning or a kernel panic if CONFIG_UBSAN_TRAP is set. This patch sets the size of the widgets list calculated with list_for_each as the initial value for num_widgets as it is used for allocating memory for the array. It is updated with the actual number of added elements after the array is filled.

Show More

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext() This command: $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: block dev insert failed: -EBUSY. fails because user space requests the same block index to be set for both ingress and egress. [ side note, I don't think it even failed prior to commit 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra"), because this ... In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext() This command: $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: block dev insert failed: -EBUSY. fails because user space requests the same block index to be set for both ingress and egress. [ side note, I don't think it even failed prior to commit 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra"), because this is a command from an old set of notes of mine which used to work, but alas, I did not scientifically bisect this ] The problem is not that it fails, but rather, that the second time around, it fails differently (and irrecoverably): $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: dsa_core: Flow block cb is busy. [ another note: the extack is added by me for illustration purposes. the context of the problem is that clsact_init() obtains the same &q->ingress_block pointer as &q->egress_block, and since we call tcf_block_get_ext() on both of them, "dev" will be added to the block->ports xarray twice, thus failing the operation: once through the ingress block pointer, and once again through the egress block pointer. the problem itself is that when xa_insert() fails, we have emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the offload never sees a corresponding FLOW_BLOCK_UNBIND. ] Even correcting the bad user input, we still cannot recover: $ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact Error: dsa_core: Flow block cb is busy. Basically the only way to recover is to reboot the system, or unbind and rebind the net device driver. To fix the bug, we need to fill the correct error teardown path which was missed during code movement, and call tcf_block_offload_unbind() when xa_insert() fails. [ last note, fundamentally I blame the label naming convention in tcf_block_get_ext() for the bug. The labels should be named after what they do, not after the error path that jumps to them. This way, it is obviously wrong that two labels pointing to the same code mean something is wrong, and checking the code correctness at the goto site is also easier ]

Show More

In the Linux kernel, the following vulnerability has been resolved: resource,kexec: walk_system_ram_res_rev must retain resource flags walk_system_ram_res_rev() erroneously discards resource flags when passing the information to the callback. This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have these resources selected during kexec to store kexec buffers if that memory happens to be at placed above normal system ram. This leads to undefined behavior after reboot. If the ... In the Linux kernel, the following vulnerability has been resolved: resource,kexec: walk_system_ram_res_rev must retain resource flags walk_system_ram_res_rev() erroneously discards resource flags when passing the information to the callback. This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have these resources selected during kexec to store kexec buffers if that memory happens to be at placed above normal system ram. This leads to undefined behavior after reboot. If the kexec buffer is never touched, nothing happens. If the kexec buffer is touched, it could lead to a crash (like below) or undefined behavior. Tested on a system with CXL memory expanders with driver managed memory, TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags were being discarded and as a result the check for IORESOURCE_SYSRAM_DRIVER_MANAGED passes. find_next_iomem_res: name(System RAM (kmem)) start(10000000000) end(1034fffffff) flags(83000200) locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0) [.] BUG: unable to handle page fault for address: ffff89834ffff000 [.] #PF: supervisor read access in kernel mode [.] #PF: error_code(0x0000) - not-present page [.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0 [.] Oops: 0000 [#1] SMP [.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0 [.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286 [.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000 [.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018 [.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900 [.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000 [.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000 [.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000 [.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [.] ata5: SATA link down (SStatus 0 SControl 300) [.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0 [.] PKRU: 55555554 [.] Call Trace: [.] <TASK> [.] ? __die+0x78/0xc0 [.] ? page_fault_oops+0x2a8/0x3a0 [.] ? exc_page_fault+0x84/0x130 [.] ? asm_exc_page_fault+0x22/0x30 [.] ? ima_restore_measurement_list+0x95/0x4b0 [.] ? template_desc_init_fields+0x317/0x410 [.] ? crypto_alloc_tfm_node+0x9c/0xc0 [.] ? init_ima_lsm+0x30/0x30 [.] ima_load_kexec_buffer+0x72/0xa0 [.] ima_init+0x44/0xa0 [.] __initstub__kmod_ima__373_1201_init_ima7+0x1e/0xb0 [.] ? init_ima_lsm+0x30/0x30 [.] do_one_initcall+0xad/0x200 [.] ? idr_alloc_cyclic+0xaa/0x110 [.] ? new_slab+0x12c/0x420 [.] ? new_slab+0x12c/0x420 [.] ? number+0x12a/0x430 [.] ? sysvec_apic_timer_interrupt+0xa/0x80 [.] ? asm_sysvec_apic_timer_interrupt+0x16/0x20 [.] ? parse_args+0xd4/0x380 [.] ? parse_args+0x14b/0x380 [.] kernel_init_freeable+0x1c1/0x2b0 [.] ? rest_init+0xb0/0xb0 [.] kernel_init+0x16/0x1a0 [.] ret_from_fork+0x2f/0x40 [.] ? rest_init+0xb0/0xb0 [.] ret_from_fork_asm+0x11/0x20 [.] </TASK>

Show More

In the Linux kernel, the following vulnerability has been resolved: regulator: rtq2208: Fix uninitialized use of regulator_config Fix rtq2208 driver uninitialized use to cause kernel error.

In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf ... In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8

Show More

In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine starts Enqueue packets in dql after dma engine starts causes race condition. Tx transfer starts once dma engine is started and may execute dql dequeue in completion before it gets queued. It results in following kernel crash while running iperf stress test: kernel BUG at lib/dynamic_queue_limits.c:99! <snip> Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ... In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine starts Enqueue packets in dql after dma engine starts causes race condition. Tx transfer starts once dma engine is started and may execute dql dequeue in completion before it gets queued. It results in following kernel crash while running iperf stress test: kernel BUG at lib/dynamic_queue_limits.c:99! <snip> Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x238/0x248 lr : dql_completed+0x3c/0x248 Call trace: dql_completed+0x238/0x248 axienet_dma_tx_cb+0xa0/0x170 xilinx_dma_do_tasklet+0xdc/0x290 tasklet_action_common+0xf8/0x11c tasklet_action+0x30/0x3c handle_softirqs+0xf8/0x230 <snip> Start dmaengine after enqueue in dql fixes the crash.

Show More

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix missing locking causing hanging calls If a call gets aborted (e.g. because kafs saw a signal) between it being queued for connection and the I/O thread picking up the call, the abort will be prioritised over the connection and it will be removed from local->new_client_calls by rxrpc_disconnect_client_call() without a lock being held. This may cause other calls on the list to disappear if a race occurs. Fix this by ... In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix missing locking causing hanging calls If a call gets aborted (e.g. because kafs saw a signal) between it being queued for connection and the I/O thread picking up the call, the abort will be prioritised over the connection and it will be removed from local->new_client_calls by rxrpc_disconnect_client_call() without a lock being held. This may cause other calls on the list to disappear if a race occurs. Fix this by taking the client_call_lock when removing a call from whatever list its ->wait_link happens to be on.

Show More

In the Linux kernel, the following vulnerability has been resolved: net/smc: do not leave a dangling sk pointer in __smc_create() Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC: smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0 WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563 Modules linked in: CPU: 0 UID: 0 PID: 5827 Comm: syz-execu ... In the Linux kernel, the following vulnerability has been resolved: net/smc: do not leave a dangling sk pointer in __smc_create() Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC: smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0 WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563 Modules linked in: CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563 Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7 RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246 RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50 R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8 R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0 FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_create net/socket.c:1616 [inline] __sys_socket_create net/socket.c:1653 [inline] __sys_socket+0x150/0x3c0 net/socket.c:1700 __do_sys_socket net/socket.c:1714 [inline] __se_sys_socket net/socket.c:1712 [inline] For reference, see commit 2d859aff775d ("Merge branch 'do-not-leave-dangling-sk-pointers-in-pf-create-functions'")

Show More

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: add missing buffer index check dvb_vb2_expbuf() didn't check if the given buffer index was for a valid buffer. Add this check.

In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix buffer overwrite when using > 32 buffers The maximum number of buffers that can be requested was increased to 64 for the video capture queue. But video capture used a must_blank array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an out-of-bounds write when using buffer indices >= 32. Create a new define MAX_VID_CAP_BUFFERS that is used to access the must_blank array and set max_num_buffers for ... In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix buffer overwrite when using > 32 buffers The maximum number of buffers that can be requested was increased to 64 for the video capture queue. But video capture used a must_blank array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an out-of-bounds write when using buffer indices >= 32. Create a new define MAX_VID_CAP_BUFFERS that is used to access the must_blank array and set max_num_buffers for the video capture queue. This solves a crash reported by: https://bugzilla.kernel.org/show_bug.cgi?id=219258

Show More

In the Linux kernel, the following vulnerability has been resolved: ksmbd: check outstanding simultaneous SMB operations If Client send simultaneous SMB operations to ksmbd, It exhausts too much memory through the "ksmbd_work_cache”. It will cause OOM issue. ksmbd has a credit mechanism but it can't handle this problem. This patch add the check if it exceeds max credits to prevent this problem by assuming that one smb request consumes at least one credit.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation When sealing or unsealing a key blob we currently do not wait for the AEAD cipher operation to finish and simply return after submitting the request. If there is some load on the system we can exit before the cipher operation is done and the buffer we read from/write to is already removed from the stack. This will e.g. result in NULL pointer dereference errors i ... In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation When sealing or unsealing a key blob we currently do not wait for the AEAD cipher operation to finish and simply return after submitting the request. If there is some load on the system we can exit before the cipher operation is done and the buffer we read from/write to is already removed from the stack. This will e.g. result in NULL pointer dereference errors in the DCP driver during blob creation. Fix this by waiting for the AEAD cipher operation to finish before resuming the seal and unseal calls.

Show More

In the Linux kernel, the following vulnerability has been resolved: dm: fix a crash if blk_alloc_disk fails If blk_alloc_disk fails, the variable md->disk is set to an error value. cleanup_mapped_device will see that md->disk is non-NULL and it will attempt to access it, causing a crash on this statement "md->disk->private_data = NULL;".

In the Linux kernel, the following vulnerability has been resolved: idpf: avoid vport access in idpf_get_link_ksettings When the device control plane is removed or the platform running device control plane is rebooted, a reset is detected on the driver. On driver reset, it releases the resources and waits for the reset to complete. If the reset fails, it takes the error path and releases the vport lock. At this time if the monitoring tools tries to access link settings, it call traces for acce ... In the Linux kernel, the following vulnerability has been resolved: idpf: avoid vport access in idpf_get_link_ksettings When the device control plane is removed or the platform running device control plane is rebooted, a reset is detected on the driver. On driver reset, it releases the resources and waits for the reset to complete. If the reset fails, it takes the error path and releases the vport lock. At this time if the monitoring tools tries to access link settings, it call traces for accessing released vport pointer. To avoid it, move link_speed_mbps to netdev_priv structure which removes the dependency on vport pointer and the vport lock in idpf_get_link_ksettings. Also use netif_carrier_ok() to check the link status and adjust the offsetof to use link_up instead of link_speed_mbps.

Show More

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid overflow in damon_feed_loop_next_input() damon_feed_loop_next_input() is inefficient and fragile to overflows. Specifically, 'score_goal_diff_bp' calculation can overflow when 'score' is high. The calculation is actually unnecessary at all because 'goal' is a constant of value 10,000. Calculation of 'compensation' is again fragile to overflow. Final calculation of return value for under-achiving case i ... In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid overflow in damon_feed_loop_next_input() damon_feed_loop_next_input() is inefficient and fragile to overflows. Specifically, 'score_goal_diff_bp' calculation can overflow when 'score' is high. The calculation is actually unnecessary at all because 'goal' is a constant of value 10,000. Calculation of 'compensation' is again fragile to overflow. Final calculation of return value for under-achiving case is again fragile to overflow when the current score is under-achieving the target. Add two corner cases handling at the beginning of the function to make the body easier to read, and rewrite the body of the function to avoid overflows and the unnecessary bp value calcuation.

Show More

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs A recent change in the venus driver results in a stuck clock on the Lenovo ThinkPad X13s, for example, when streaming video in firefox: video_cc_mvs0_clk status stuck at 'off' WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c ... Call trace: clk_branch_wait+0x144/0x15c clk_branch2_enable+0x30/0x40 clk_core_enable+ ... In the Linux kernel, the following vulnerability has been resolved: clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs A recent change in the venus driver results in a stuck clock on the Lenovo ThinkPad X13s, for example, when streaming video in firefox: video_cc_mvs0_clk status stuck at 'off' WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c ... Call trace: clk_branch_wait+0x144/0x15c clk_branch2_enable+0x30/0x40 clk_core_enable+0xd8/0x29c clk_enable+0x2c/0x4c vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core] coreid_power_v4+0x464/0x628 [venus_core] vdec_start_streaming+0xc4/0x510 [venus_dec] vb2_start_streaming+0x6c/0x180 [videobuf2_common] vb2_core_streamon+0x120/0x1dc [videobuf2_common] vb2_streamon+0x1c/0x6c [videobuf2_v4l2] v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem] v4l_streamon+0x24/0x30 [videodev] using the out-of-tree sm8350/sc8280xp venus support. [1] Update also the sm8350/sc8280xp GDSC definitions so that the hw control mode can be changed at runtime as the venus driver now requires.

Show More

In the Linux kernel, the following vulnerability has been resolved: sock_map: fix a NULL pointer dereference in sock_map_link_update_prog() The following race condition could trigger a NULL pointer dereference: sock_map_link_detach(): sock_map_link_update_prog(): mutex_lock(&sockmap_mutex); ... sockmap_link->map = NULL; mutex_unlock(&sockmap_mutex); mutex_lock(&sockmap_mutex); ... sock_map_prog_link_lookup(sockmap_link->map); mutex_unlock(&sockmap_m ... In the Linux kernel, the following vulnerability has been resolved: sock_map: fix a NULL pointer dereference in sock_map_link_update_prog() The following race condition could trigger a NULL pointer dereference: sock_map_link_detach(): sock_map_link_update_prog(): mutex_lock(&sockmap_mutex); ... sockmap_link->map = NULL; mutex_unlock(&sockmap_mutex); mutex_lock(&sockmap_mutex); ... sock_map_prog_link_lookup(sockmap_link->map); mutex_unlock(&sockmap_mutex); <continue> Fix it by adding a NULL pointer check. In this specific case, it makes no sense to update a link which is being released.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... ... In the Linux kernel, the following vulnerability has been resolved: bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 .............. backtrace (crc 781e32cc): [<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80 [<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0 [<00000000597124d6>] __alloc.isra.0+0x89/0xb0 [<000000004ebfffcd>] alloc_bulk+0x2af/0x720 [<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0 [<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610 [<000000008b616eac>] bpf_global_ma_init+0x19/0x30 [<00000000fc473efc>] do_one_initcall+0xd3/0x3c0 [<00000000ec81498c>] kernel_init_freeable+0x66a/0x940 [<00000000b119f72f>] kernel_init+0x20/0x160 [<00000000f11ac9a7>] ret_from_fork+0x3c/0x70 [<0000000004671da4>] ret_from_fork_asm+0x1a/0x30 That is because nr_bits will be set as zero in bpf_iter_bits_next() after all bits have been iterated. Fix the issue by setting kit->bit to kit->nr_bits instead of setting kit->nr_bits to zero when the iteration completes in bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to check whether the iteration is complete and still use "nr_bits > 64" to indicate whether bits are dynamically allocated. The "!nr_bits" check is necessary because bpf_iter_bits_new() may fail before setting kit->nr_bits, and this condition will stop the iteration early instead of accessing the zeroed or freed kit->bits. Considering the initial value of kit->bits is -1 and the type of kit->nr_bits is unsigned int, change the type of kit->nr_bits to int. The potential overflow problem will be handled in the following patch.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf: Check the validity of nr_words in bpf_iter_bits_new() Check the validity of nr_words in bpf_iter_bits_new(). Without this check, when multiplication overflow occurs for nr_bits (e.g., when nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008). Fix it by limiting the maximum value of nr_words to 511. The value is derived from the current im ... In the Linux kernel, the following vulnerability has been resolved: bpf: Check the validity of nr_words in bpf_iter_bits_new() Check the validity of nr_words in bpf_iter_bits_new(). Without this check, when multiplication overflow occurs for nr_bits (e.g., when nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008). Fix it by limiting the maximum value of nr_words to 511. The value is derived from the current implementation of BPF memory allocator. To ensure compatibility if the BPF memory allocator's size limitation changes in the future, use the helper bpf_mem_alloc_check_size() to check whether nr_bytes is too larger. And return -E2BIG instead of -ENOMEM for oversized nr_bytes.

Show More

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime P ... In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver.

Show More

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore ... In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.

Show More

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver ... In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.

Show More

In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ b ... In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table().

Show More

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan() KASAN reported following issue: BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt] Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387 Tainted: [U]=USER Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: ... In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan() KASAN reported following issue: BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt] Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387 Tainted: [U]=USER Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: <TASK> dump_stack_lvl+0x6c/0x90 print_report+0xd1/0x630 kasan_report+0xdb/0x110 __asan_report_load4_noabort+0x14/0x20 tb_retimer_scan+0xffe/0x1550 [thunderbolt] tb_scan_port+0xa6f/0x2060 [thunderbolt] tb_handle_hotplug+0x17b1/0x3080 [thunderbolt] process_one_work+0x626/0x1100 worker_thread+0x6c8/0xfa0 kthread+0x2c8/0x3a0 ret_from_fork+0x3a/0x80 ret_from_fork_asm+0x1a/0x30 This happens because the loop variable still gets incremented by one so max becomes 3 instead of 2, and this makes the second loop read past the the array declared on the stack. Fix this by assigning to max directly in the loop body.

Show More

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix error propagation of split bios The purpose of btrfs_bbio_propagate_error() shall be propagating an error of split bio to its original btrfs_bio, and tell the error to the upper layer. However, it's not working well on some cases. * Case 1. Immediate (or quick) end_bio with an error When btrfs sends btrfs_bio to mirrored devices, btrfs calls btrfs_bio_end_io() when all the mirroring bios are completed. If that btr ... In the Linux kernel, the following vulnerability has been resolved: btrfs: fix error propagation of split bios The purpose of btrfs_bbio_propagate_error() shall be propagating an error of split bio to its original btrfs_bio, and tell the error to the upper layer. However, it's not working well on some cases. * Case 1. Immediate (or quick) end_bio with an error When btrfs sends btrfs_bio to mirrored devices, btrfs calls btrfs_bio_end_io() when all the mirroring bios are completed. If that btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error() accesses the orig_bbio's bio context to increase the error count. That works well in most cases. However, if the end_io is called enough fast, orig_bbio's (remaining part after split) bio context may not be properly set at that time. Since the bio context is set when the orig_bbio (the last btrfs_bio) is sent to devices, that might be too late for earlier split btrfs_bio's completion. That will result in NULL pointer dereference. That bug is easily reproducible by running btrfs/146 on zoned devices [1] and it shows the following trace. [1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-5) RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs] BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0 RSP: 0018:ffffc9000006f248 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080 RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58 R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158 FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? page_fault_oops+0x13e/0x2b0 ? _printk+0x58/0x73 ? do_user_addr_fault+0x5f/0x750 ? exc_page_fault+0x76/0x240 ? asm_exc_page_fault+0x22/0x30 ? btrfs_bio_end_io+0xae/0xc0 [btrfs] ? btrfs_log_dev_io_error+0x7f/0x90 [btrfs] btrfs_orig_write_end_io+0x51/0x90 [btrfs] dm_submit_bio+0x5c2/0xa50 [dm_mod] ? find_held_lock+0x2b/0x80 ? blk_try_enter_queue+0x90/0x1e0 __submit_bio+0xe0/0x130 ? ktime_get+0x10a/0x160 ? lockdep_hardirqs_on+0x74/0x100 submit_bio_noacct_nocheck+0x199/0x410 btrfs_submit_bio+0x7d/0x150 [btrfs] btrfs_submit_chunk+0x1a1/0x6d0 [btrfs] ? lockdep_hardirqs_on+0x74/0x100 ? __folio_start_writeback+0x10/0x2c0 btrfs_submit_bbio+0x1c/0x40 [btrfs] submit_one_bio+0x44/0x60 [btrfs] submit_extent_folio+0x13f/0x330 [btrfs] ? btrfs_set_range_writeback+0xa3/0xd0 [btrfs] extent_writepage_io+0x18b/0x360 [btrfs] extent_write_locked_range+0x17c/0x340 [btrfs] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs] run_delalloc_cow+0x71/0xd0 [btrfs] btrfs_run_delalloc_range+0x176/0x500 [btrfs] ? find_lock_delalloc_range+0x119/0x260 [btrfs] writepage_delalloc+0x2ab/0x480 [btrfs] extent_write_cache_pages+0x236/0x7d0 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xd4/0x240 ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode+0x12c/0x290 ? wbc_attach_and_unlock_inode+0x12c/0x29 ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.2673 ... In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334

Show More