Vulnerabilities (CVE)

Integer overflow in Adobe Flash Player before 18.0.0.333 and 19.x through 21.x before 21.0.0.182 on Windows and OS X and before 11.2.202.577 on Linux, Adobe AIR before 21.0.0.176, Adobe AIR SDK before 21.0.0.176, and Adobe AIR SDK & Compiler before 21.0.0.176 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2016-0963 and CVE-2016-0993.

Use-after-free vulnerability in Adobe Flash Player before 18.0.0.329 and 19.x and 20.x before 20.0.0.306 on Windows and OS X and before 11.2.202.569 on Linux, Adobe AIR before 20.0.0.260, Adobe AIR SDK before 20.0.0.260, and Adobe AIR SDK & Compiler before 20.0.0.260 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2016-0973, CVE-2016-0974, CVE-2016-0975, CVE-2016-0982, and CVE-2016-0983.

Integer overflow in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors.

Adobe Flash Player 18.x through 18.0.0.252 and 19.x through 19.0.0.207 on Windows and OS X and 11.x through 11.2.202.535 on Linux allows remote attackers to execute arbitrary code via a crafted SWF file, as exploited in the wild in October 2015.

In the Linux kernel, the following vulnerability has been resolved: module: fix [e_shstrndx].sh_size=0 OOB access It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU ... In the Linux kernel, the following vulnerability has been resolved: module: fix [e_shstrndx].sh_size=0 OOB access It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:load_module+0x19b/0x2391 [rebased patch onto modules-next]

Show More

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not double complete bio on errors during compressed reads I hit some weird panics while fixing up the error handling from btrfs_lookup_bio_sums(). Turns out the compression path will complete the bio we use if we set up any of the compression bios and then return an error, and then btrfs_submit_data_bio() will also call bio_endio() on the bio. Fix this by making btrfs_submit_compressed_read() responsible for callin ... In the Linux kernel, the following vulnerability has been resolved: btrfs: do not double complete bio on errors during compressed reads I hit some weird panics while fixing up the error handling from btrfs_lookup_bio_sums(). Turns out the compression path will complete the bio we use if we set up any of the compression bios and then return an error, and then btrfs_submit_data_bio() will also call bio_endio() on the bio. Fix this by making btrfs_submit_compressed_read() responsible for calling bio_endio() on the bio if there are any errors. Currently it was only doing it if we created the compression bios, otherwise it was depending on btrfs_submit_data_bio() to do the right thing. This creates the above problem, so fix up btrfs_submit_compressed_read() to always call bio_endio() in case of an error, and then simply return from btrfs_submit_data_bio() if we had to call btrfs_submit_compressed_read().

Show More

Software installed and running inside a Guest VM may override Firmware's state and gain access to the GPU.

Software installed and running inside a Guest VM may conduct improper GPU system calls to prevent other Guests from running work on the GPU.

IBM Content Navigator 3.0.11, 3.0.15, 3.1.0, and 3.2.0 could expose the directory listing of the application upon using an application URL. Application files and folders are visible in the browser to a user; however, the contents of the files cannot be read obtained or modified.

In the Linux kernel, the following vulnerability has been resolved: extcon: Modify extcon device to be created after driver data is set Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace. Backtrace: [<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev ... In the Linux kernel, the following vulnerability has been resolved: extcon: Modify extcon device to be created after driver data is set Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace. Backtrace: [<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show) [<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show) [<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read) [<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read) [<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read) [<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read) [<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read) [<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read) [<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return)

Show More

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, pair only capable devices OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: ... In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, pair only capable devices OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: 1706 at drivers/net/ethernet/mellanox/mlx5/core/dev.c:642 mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core overlay fuse [last unloaded: mlx5_core] CPU: 9 PID: 1706 Comm: devlink Not tainted 5.18.0-rc7+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Code: 02 00 75 48 48 8b 85 80 04 00 00 5d c3 31 c0 5d c3 be ff ff ff ff 48 c7 c7 08 41 5b a0 e8 36 87 28 e3 85 c0 0f 85 6f ff ff ff <0f> 0b e9 68 ff ff ff 48 c7 c7 0c 91 cc 84 e8 cb 36 6f e1 e9 4d ff RSP: 0018:ffff88811bf47458 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811b398000 RCX: 0000000000000001 RDX: 0000000080000000 RSI: ffffffffa05b4108 RDI: ffff88812daaaa78 RBP: ffff88812d050380 R08: 0000000000000001 R09: ffff88811d6b3437 R10: 0000000000000001 R11: 00000000fddd3581 R12: ffff88815238c000 R13: ffff88812d050380 R14: ffff8881018aa7e0 R15: ffff88811d6b3428 FS: 00007fc82e18ae80(0000) GS:ffff88842e080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9630d1b421 CR3: 0000000149802004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mlx5_esw_offloads_devcom_event+0x99/0x3b0 [mlx5_core] mlx5_devcom_send_event+0x167/0x1d0 [mlx5_core] esw_offloads_enable+0x1153/0x1500 [mlx5_core] ? mlx5_esw_offloads_controller_valid+0x170/0x170 [mlx5_core] ? wait_for_completion_io_timeout+0x20/0x20 ? mlx5_rescan_drivers_locked+0x318/0x810 [mlx5_core] mlx5_eswitch_enable_locked+0x586/0xc50 [mlx5_core] ? mlx5_eswitch_disable_pf_vf_vports+0x1d0/0x1d0 [mlx5_core] ? mlx5_esw_try_lock+0x1b/0xb0 [mlx5_core] ? mlx5_eswitch_enable+0x270/0x270 [mlx5_core] ? __debugfs_create_file+0x260/0x3e0 mlx5_devlink_eswitch_mode_set+0x27e/0x870 [mlx5_core] ? mutex_lock_io_nested+0x12c0/0x12c0 ? esw_offloads_disable+0x250/0x250 [mlx5_core] ? devlink_nl_cmd_trap_get_dumpit+0x470/0x470 ? rcu_read_lock_sched_held+0x3f/0x70 devlink_nl_cmd_eswitch_set_doit+0x217/0x620

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem When the mapping is already reaped the unmap must be a no-op, as we would otherwise try to remove the mapping twice, corrupting the involved data structures.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_es ... In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()-> mlx5_tc_ct_clean() Only afterwards, tc cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup() which would have deleted all the tc ct rules, and so delete all the offloaded tuples. Fix this reversing the order of init and on cleanup, which will result in tc cleanup then ct cleanup. [ 9443.593347] WARNING: CPU: 2 PID: 206774 at drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1882 mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593349] Modules linked in: act_ct nf_flow_table rdma_ucm(O) rdma_cm(O) iw_cm(O) ib_ipoib(O) ib_cm(O) ib_umad(O) mlx5_core(O-) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) psample ib_core(O) mlx_compat(O) ip_gre gre ip_tunnel act_vlan bonding geneve esp6_offload esp6 esp4_offload esp4 act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel act_mirred act_skbedit act_gact cls_flower sch_ingress nfnetlink_cttimeout nfnetlink xfrm_user xfrm_algo 8021q garp stp ipmi_devintf mrp ipmi_msghandler llc openvswitch nsh nf_conncount nf_nat mst_pciconf(O) dm_multipath sbsa_gwdt uio_pdrv_genirq uio mlxbf_pmc mlxbf_pka mlx_trio mlx_bootctl(O) bluefield_edac sch_fq_codel ip_tables ipv6 crc_ccitt btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 crct10dif_ce i2c_mlxbf gpio_mlxbf2 mlxbf_gige aes_neon_bs aes_neon_blk [last unloaded: mlx5_ib] [ 9443.593419] CPU: 2 PID: 206774 Comm: modprobe Tainted: G O 5.4.0-1023.24.gc14613d-bluefield #1 [ 9443.593422] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:143ebaf Jan 11 2022 [ 9443.593424] pstate: 20000005 (nzCv daif -PAN -UAO) [ 9443.593489] pc : mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593545] lr : mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593546] sp : ffff8000135dbab0 [ 9443.593548] x29: ffff8000135dbab0 x28: ffff0003a6ab8e80 [ 9443.593550] x27: 0000000000000000 x26: ffff0003e07d7000 [ 9443.593552] x25: ffff800009609de0 x24: ffff000397fb2120 [ 9443.593554] x23: ffff0003975c0000 x22: 0000000000000000 [ 9443.593556] x21: ffff0003975f08c0 x20: ffff800009609de0 [ 9443.593558] x19: ffff0003c8a13380 x18: 0000000000000014 [ 9443.593560] x17: 0000000067f5f125 x16: 000000006529c620 [ 9443.593561] x15: 000000000000000b x14: 0000000000000000 [ 9443.593563] x13: 0000000000000002 x12: 0000000000000001 [ 9443.593565] x11: ffff800011108868 x10: 0000000000000000 [ 9443.593567] x9 : 0000000000000000 x8 : ffff8000117fb270 [ 9443.593569] x7 : ffff0003ebc01288 x6 : 0000000000000000 [ 9443.593571] x5 : ffff800009591ab8 x4 : fffffe000f6d9a20 [ 9443.593572] x3 : 0000000080040001 x2 : fffffe000f6d9a20 [ 9443.593574] x1 : ffff8000095901d8 x0 : 0000000000000025 [ 9443.593577] Call trace: [ 9443.593634] mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593688] mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593743] mlx5_tc_ct_clean+0x34/0xa8 [mlx5_core] [ 9443.593797] mlx5e_tc_esw_cleanup+0x58/0x88 [mlx5_core] [ 9443.593851] mlx5e_rep_tc_cleanup+0x24/0x30 [mlx5_core] [ 9443.593905] mlx5e_cleanup_rep_tx+0x6c/0x78 [mlx5_core] [ 9443.593959] mlx5e_detach_netdev+0x74/0x98 [mlx5_core] [ 9443.594013] mlx5e_netdev_change_profile+0x70/0x180 [mlx5_core] [ 9443.594067] mlx5e_netdev_attach_nic_profile+0x34/0x40 [mlx5_core] [ 9443.594122] mlx5e_vport_rep_unload+0x15c/0x1a8 [mlx5_core] [ 9443.594177] mlx5_eswitch_unregister_vport_reps+0x228/0x298 [mlx5_core] [ 9443.594231] mlx5e_rep_remove+0x2c/0x38 ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PAR ... In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured.

Show More

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Clear prog->jited_len along prog->jited syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns") is exposing a prior bug in bpf arm64. bpf_prog_get_info_by_fd() looks at prog->jited_len to determine if the JIT image can be copied out to user space. My theory is that syzbot ... In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Clear prog->jited_len along prog->jited syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns") is exposing a prior bug in bpf arm64. bpf_prog_get_info_by_fd() looks at prog->jited_len to determine if the JIT image can be copied out to user space. My theory is that syzbot managed to get a prog where prog->jited_len has been set to 43, while prog->bpf_func has ben cleared. It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering this particular warning. I thought find_vma_area(NULL) would not find a vm_struct. As we do not hold vmap_area_lock spinlock, it might be possible that the found vm_struct was garbage. [1] usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)! kernel BUG at mm/usercopy.c:101! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0 Hardware name: linux,dummy-virt (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89 sp : ffff80000b773a20 x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48 x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000 x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001 x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420 x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031 x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865 x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830 x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000 x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064 Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:89 check_heap_object mm/usercopy.c:186 [inline] __check_object_size mm/usercopy.c:252 [inline] __check_object_size+0x198/0x36c mm/usercopy.c:214 check_object_size include/linux/thread_info.h:199 [inline] check_copy_size include/linux/thread_info.h:235 [inline] copy_to_user include/linux/uaccess.h:159 [inline] bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993 bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253 __sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956 __do_sys_bpf kernel/bpf/syscall.c:5021 [inline] __se_sys_bpf kernel/bpf/syscall.c:5019 [inline] __arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52 el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142 do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206 el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624 el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581 Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)

Show More

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid cycles in directory h-tree A maliciously corrupted filesystem can contain cycles in the h-tree stored inside a directory. That can easily lead to the kernel corrupting tree nodes that were already verified under its hands while doing a node split and consequently accessing unallocated memory. Fix the problem by verifying traversed block numbers are unique.

In the Linux kernel, the following vulnerability has been resolved: ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that we are in the middle of replay the fast commit journal. This was actually a mistake, since the sbi->s_mount_info is initialized from es->s_state. Arguably s_mount_state is misleadingly named, but the name is historical --- s_mount_state and s_state dates back to ext2. What should have b ... In the Linux kernel, the following vulnerability has been resolved: ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that we are in the middle of replay the fast commit journal. This was actually a mistake, since the sbi->s_mount_info is initialized from es->s_state. Arguably s_mount_state is misleadingly named, but the name is historical --- s_mount_state and s_state dates back to ext2. What should have been used is the ext4_{set,clear,test}_mount_flag() inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags. The problem with using EXT4_FC_REPLAY is that a maliciously corrupted superblock could result in EXT4_FC_REPLAY getting set in s_mount_state. This bypasses some sanity checks, and this can trigger a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter out the EXT4_FC_REPLAY bit for now. We should eventually transition away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.

Show More

In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks f ... In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value.

Show More

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Trap RDMA segment overflows Prevent svc_rdma_build_writes() from walking off the end of a Write chunk's segment array. Caught with KASAN. The test that this fix replaces is invalid, and might have been left over from an earlier prototype of the PCL work.

In the Linux kernel, the following vulnerability has been resolved: efi: Do not import certificates from UEFI Secure Boot for T2 Macs On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables at early boot to load UEFI Secure Boot certificates, a page fault occurs in Apple firmware code and EFI runtime services are disabled with the following logs: [Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000 WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks. ... In the Linux kernel, the following vulnerability has been resolved: efi: Do not import certificates from UEFI Secure Boot for T2 Macs On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables at early boot to load UEFI Secure Boot certificates, a page fault occurs in Apple firmware code and EFI runtime services are disabled with the following logs: [Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000 WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0 (Removed some logs from here) Call Trace: <TASK> page_fault_oops+0x4f/0x2c0 ? search_bpf_extables+0x6b/0x80 ? search_module_extables+0x50/0x80 ? search_exception_tables+0x5b/0x60 kernelmode_fixup_or_oops+0x9e/0x110 __bad_area_nosemaphore+0x155/0x190 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x8c/0xa0 exc_page_fault+0xd8/0x180 asm_exc_page_fault+0x1e/0x30 (Removed some logs from here) ? __efi_call+0x28/0x30 ? switch_mm+0x20/0x30 ? efi_call_rts+0x19a/0x8e0 ? process_one_work+0x222/0x3f0 ? worker_thread+0x4a/0x3d0 ? kthread+0x17a/0x1a0 ? process_one_work+0x3f0/0x3f0 ? set_kthread_struct+0x40/0x40 ? ret_from_fork+0x22/0x30 </TASK> ---[ end trace 1f82023595a5927f ]--- efi: Froze efi_rts_wq and disabled EFI Runtime Services integrity: Couldn't get size: 0x8000000000000015 integrity: MODSIGN: Couldn't get UEFI db list efi: EFI Runtime Services are disabled! integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get UEFI dbx list integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get mokx list integrity: Couldn't get size: 0x80000000 So we avoid reading these UEFI variables and thus prevent the crash.

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on total_data_blocks As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215916 The kernel message is shown below: kernel BUG at fs/f2fs/segment.c:2560! Call Trace: allocate_segment_by_default+0x228/0x440 f2fs_allocate_data_block+0x13d1/0x31f0 do_write_page+0x18d/0x710 f2fs_outplace_write_data+0x151/0x250 f2fs_do_write_data_page+0xef9/0x1980 move_data_page+0x6af/0x ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on total_data_blocks As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215916 The kernel message is shown below: kernel BUG at fs/f2fs/segment.c:2560! Call Trace: allocate_segment_by_default+0x228/0x440 f2fs_allocate_data_block+0x13d1/0x31f0 do_write_page+0x18d/0x710 f2fs_outplace_write_data+0x151/0x250 f2fs_do_write_data_page+0xef9/0x1980 move_data_page+0x6af/0xbc0 do_garbage_collect+0x312f/0x46f0 f2fs_gc+0x6b0/0x3bc0 f2fs_balance_fs+0x921/0x2260 f2fs_write_single_data_page+0x16be/0x2370 f2fs_write_cache_pages+0x428/0xd00 f2fs_write_data_pages+0x96e/0xd50 do_writepages+0x168/0x550 __writeback_single_inode+0x9f/0x870 writeback_sb_inodes+0x47d/0xb20 __writeback_inodes_wb+0xb2/0x200 wb_writeback+0x4bd/0x660 wb_workfn+0x5f3/0xab0 process_one_work+0x79f/0x13e0 worker_thread+0x89/0xf60 kthread+0x26a/0x300 ret_from_fork+0x22/0x30 RIP: 0010:new_curseg+0xe8d/0x15f0 The root cause is: ckpt.valid_block_count is inconsistent with SIT table, stat info indicates filesystem has free blocks, but SIT table indicates filesystem has no free segment. So that during garbage colloection, it triggers panic when LFS allocator fails to find free segment. This patch tries to fix this issue by checking consistency in between ckpt.valid_block_count and block accounted from SIT.

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check for inline inode Yanming reported a kernel bug in Bugzilla kernel [1], which can be reproduced. The bug message is: The kernel message is shown below: kernel BUG at fs/inode.c:611! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 dput+0x2dd/0x720 do_renameat2+0x596/0x970 __x64_sys_rename+0x78/0x90 do_syscall_64+0x3b/0x90 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215895 The bu ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check for inline inode Yanming reported a kernel bug in Bugzilla kernel [1], which can be reproduced. The bug message is: The kernel message is shown below: kernel BUG at fs/inode.c:611! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 dput+0x2dd/0x720 do_renameat2+0x596/0x970 __x64_sys_rename+0x78/0x90 do_syscall_64+0x3b/0x90 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215895 The bug is due to fuzzed inode has both inline_data and encrypted flags. During f2fs_evict_inode(), as the inode was deleted by rename(), it will cause inline data conversion due to conflicting flags. The page cache will be polluted and the panic will be triggered in clear_inode(). Try fixing the bug by doing more sanity checks for inline data inode in sanity_check_inode().

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on block address in f2fs_do_zero_range() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215894 I have encountered a bug in F2FS file system in kernel v5.17. I have uploaded the system call sequence as case.c, and a fuzzed image can be found in google net disk The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can reproduce the bug by running the ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on block address in f2fs_do_zero_range() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215894 I have encountered a bug in F2FS file system in kernel v5.17. I have uploaded the system call sequence as case.c, and a fuzzed image can be found in google net disk The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can reproduce the bug by running the following commands: kernel BUG at fs/f2fs/segment.c:2291! Call Trace: f2fs_invalidate_blocks+0x193/0x2d0 f2fs_fallocate+0x2593/0x4a70 vfs_fallocate+0x2a5/0xac0 ksys_fallocate+0x35/0x70 __x64_sys_fallocate+0x8e/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is, after image was fuzzed, block mapping info in inode will be inconsistent with SIT table, so in f2fs_fallocate(), it will cause panic when updating SIT with invalid blkaddr. Let's fix the issue by adding sanity check on block address before updating SIT table with it.

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty inode in f2fs_evict_inode() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215904 The kernel message is shown below: kernel BUG at fs/f2fs/inode.c:825! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 shrink_dentry_list+0x17c/0x4f0 shrink_dcache_parent+0x143/0x1e0 do_one_tree+0x9/0x30 shrink_dcache_for_umount+0x51/0x120 generic_shutdown_super+0x5c/0x3a0 k ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty inode in f2fs_evict_inode() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215904 The kernel message is shown below: kernel BUG at fs/f2fs/inode.c:825! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 shrink_dentry_list+0x17c/0x4f0 shrink_dcache_parent+0x143/0x1e0 do_one_tree+0x9/0x30 shrink_dcache_for_umount+0x51/0x120 generic_shutdown_super+0x5c/0x3a0 kill_block_super+0x90/0xd0 kill_f2fs_super+0x225/0x310 deactivate_locked_super+0x78/0xc0 cleanup_mnt+0x2b7/0x480 task_work_run+0xc8/0x150 exit_to_user_mode_prepare+0x14a/0x150 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 The root cause is: inode node and dnode node share the same nid, so during f2fs_evict_inode(), dnode node truncation will invalidate its NAT entry, so when truncating inode node, it fails due to invalid NAT entry, result in inode is still marked as dirty, fix this issue by clearing dirty for inode and setting SBI_NEED_FSCK flag in filesystem. output from dump.f2fs: [print_node_info: 354] Node ID [0xf:15] is inode i_nid[0] [0x f : 15]

Show More

In the Linux kernel, the following vulnerability has been resolved: tcp: tcp_rtx_synack() can be called from process context Laurent reported the enclosed report [1] This bug triggers with following coditions: 0) Kernel built with CONFIG_DEBUG_PREEMPT=y 1) A new passive FastOpen TCP socket is created. This FO socket waits for an ACK coming from client to be a complete ESTABLISHED one. 2) A socket operation on this socket goes through lock_sock() release_sock() dance. 3) While the s ... In the Linux kernel, the following vulnerability has been resolved: tcp: tcp_rtx_synack() can be called from process context Laurent reported the enclosed report [1] This bug triggers with following coditions: 0) Kernel built with CONFIG_DEBUG_PREEMPT=y 1) A new passive FastOpen TCP socket is created. This FO socket waits for an ACK coming from client to be a complete ESTABLISHED one. 2) A socket operation on this socket goes through lock_sock() release_sock() dance. 3) While the socket is owned by the user in step 2), a retransmit of the SYN is received and stored in socket backlog. 4) At release_sock() time, the socket backlog is processed while in process context. 5) A SYNACK packet is cooked in response of the SYN retransmit. 6) -> tcp_rtx_synack() is called in process context. Before blamed commit, tcp_rtx_synack() was always called from BH handler, from a timer handler. Fix this by using TCP_INC_STATS() & NET_INC_STATS() which do not assume caller is in non preemptible context. [1] BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180 caller is tcp_rtx_synack.part.0+0x36/0xc0 CPU: 10 PID: 2180 Comm: epollpep Tainted: G OE 5.16.0-0.bpo.4-amd64 #1 Debian 5.16.12-1~bpo11+1 Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021 Call Trace: <TASK> dump_stack_lvl+0x48/0x5e check_preemption_disabled+0xde/0xe0 tcp_rtx_synack.part.0+0x36/0xc0 tcp_rtx_synack+0x8d/0xa0 ? kmem_cache_alloc+0x2e0/0x3e0 ? apparmor_file_alloc_security+0x3b/0x1f0 inet_rtx_syn_ack+0x16/0x30 tcp_check_req+0x367/0x610 tcp_rcv_state_process+0x91/0xf60 ? get_nohz_timer_target+0x18/0x1a0 ? lock_timer_base+0x61/0x80 ? preempt_count_add+0x68/0xa0 tcp_v4_do_rcv+0xbd/0x270 __release_sock+0x6d/0xb0 release_sock+0x2b/0x90 sock_setsockopt+0x138/0x1140 ? __sys_getsockname+0x7e/0xc0 ? aa_sk_perm+0x3e/0x1a0 __sys_setsockopt+0x198/0x1e0 __x64_sys_setsockopt+0x21/0x30 do_syscall_64+0x38/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae

Show More

In the Linux kernel, the following vulnerability has been resolved: sfc: fix considering that all channels have TX queues Normally, all channels have RX and TX queues, but this is not true if modparam efx_separate_tx_channels=1 is used. In that cases, some channels only have RX queues and others only TX queues (or more preciselly, they have them allocated, but not initialized). Fix efx_channel_has_tx_queues to return the correct value for this case too. Messages shown at probe time before th ... In the Linux kernel, the following vulnerability has been resolved: sfc: fix considering that all channels have TX queues Normally, all channels have RX and TX queues, but this is not true if modparam efx_separate_tx_channels=1 is used. In that cases, some channels only have RX queues and others only TX queues (or more preciselly, they have them allocated, but not initialized). Fix efx_channel_has_tx_queues to return the correct value for this case too. Messages shown at probe time before the fix: sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0 ------------[ cut here ]------------ netdevice: ens6f0np0: failed to initialise TXQ -1 WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped Call Trace: efx_init_tx_queue+0xaa/0xf0 [sfc] efx_start_channels+0x49/0x120 [sfc] efx_start_all+0x1f8/0x430 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xd0/0x190 __dev_change_flags+0x1b3/0x220 dev_change_flags+0x21/0x60 [...] stripped Messages shown at remove time before the fix: sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues sfc 0000:03:00.0 ens6f0np0: failed to flush queues

Show More

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215897 I have encountered a bug in F2FS file system in kernel v5.17. The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can reproduce the bug by running the following commands: The kernel message is shown below: kernel BUG at fs/f2fs/f2fs.h:2511! Call Trace: f2fs_remo ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215897 I have encountered a bug in F2FS file system in kernel v5.17. The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can reproduce the bug by running the following commands: The kernel message is shown below: kernel BUG at fs/f2fs/f2fs.h:2511! Call Trace: f2fs_remove_inode_page+0x2a2/0x830 f2fs_evict_inode+0x9b7/0x1510 evict+0x282/0x4e0 do_unlinkat+0x33a/0x540 __x64_sys_unlinkat+0x8e/0xd0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is: .total_valid_block_count or .total_valid_node_count could fuzzed to zero, then once dec_valid_node_count() was called, it will cause BUG_ON(), this patch fixes to print warning info and set SBI_NEED_FSCK into CP instead of panic.

Show More

In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context' This patch fixes the issue 'BUG: Invalid wait context' during restart() callback by using clk_prepare_enable() instead of pm_runtime_get_sync() for turning on the clocks during restart. This issue is noticed when testing with renesas_defconfig. [ 42.213802] reboot: Restarting system [ 42.217860] [ 42.219364] ============================= [ 42.223368] [ BUG: Invalid ... In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context' This patch fixes the issue 'BUG: Invalid wait context' during restart() callback by using clk_prepare_enable() instead of pm_runtime_get_sync() for turning on the clocks during restart. This issue is noticed when testing with renesas_defconfig. [ 42.213802] reboot: Restarting system [ 42.217860] [ 42.219364] ============================= [ 42.223368] [ BUG: Invalid wait context ] [ 42.227372] 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 Not tainted [ 42.234153] ----------------------------- [ 42.238155] systemd-shutdow/1 is trying to lock: [ 42.242766] ffff00000a650828 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x14/0x20 [ 42.250709] other info that might help us debug this: [ 42.255753] context-{4:4} [ 42.258368] 2 locks held by systemd-shutdow/1: [ 42.262806] #0: ffff80000944e1c8 (system_transition_mutex#2){+.+.}-{3:3}, at: __do_sys_reboot+0xd0/0x250 [ 42.272388] #1: ffff8000094c4e40 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x0/0x150 [ 42.281795] stack backtrace: [ 42.284672] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 [ 42.294577] Hardware name: Renesas SMARC EVK based on r9a07g044c2 (DT) [ 42.301096] Call trace: [ 42.303538] dump_backtrace+0xcc/0xd8 [ 42.307203] show_stack+0x14/0x30 [ 42.310517] dump_stack_lvl+0x88/0xb0 [ 42.314180] dump_stack+0x14/0x2c [ 42.317492] __lock_acquire+0x1b24/0x1b50 [ 42.321502] lock_acquire+0x120/0x3a8 [ 42.325162] __mutex_lock+0x84/0x8f8 [ 42.328737] mutex_lock_nested+0x30/0x58 [ 42.332658] genpd_lock_mtx+0x14/0x20 [ 42.336319] genpd_runtime_resume+0xc4/0x228 [ 42.340587] __rpm_callback+0x44/0x170 [ 42.344337] rpm_callback+0x64/0x70 [ 42.347824] rpm_resume+0x4e0/0x6b8 [ 42.351310] __pm_runtime_resume+0x50/0x78 [ 42.355404] rzg2l_wdt_restart+0x28/0x68 [ 42.359329] watchdog_restart_notifier+0x1c/0x30 [ 42.363943] atomic_notifier_call_chain+0x94/0x150 [ 42.368732] do_kernel_restart+0x24/0x30 [ 42.372652] machine_restart+0x44/0x70 [ 42.376399] kernel_restart+0x3c/0x60 [ 42.380058] __do_sys_reboot+0x228/0x250 [ 42.383977] __arm64_sys_reboot+0x20/0x28 [ 42.387983] invoke_syscall+0x40/0xf8

Show More

In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix inflight count imbalances and IO hangs on offline iolatency needs to track the number of inflight IOs per cgroup. As this tracking can be expensive, it is disabled when no cgroup has iolatency configured for the device. To ensure that the inflight counters stay balanced, iolatency_set_limit() freezes the request_queue while manipulating the enabled counter, which ensures that no IO is in flight and thus all ... In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix inflight count imbalances and IO hangs on offline iolatency needs to track the number of inflight IOs per cgroup. As this tracking can be expensive, it is disabled when no cgroup has iolatency configured for the device. To ensure that the inflight counters stay balanced, iolatency_set_limit() freezes the request_queue while manipulating the enabled counter, which ensures that no IO is in flight and thus all counters are zero. Unfortunately, iolatency_set_limit() isn't the only place where the enabled counter is manipulated. iolatency_pd_offline() can also dec the counter and trigger disabling. As this disabling happens without freezing the q, this can easily happen while some IOs are in flight and thus leak the counts. This can be easily demonstrated by turning on iolatency on an one empty cgroup while IOs are in flight in other cgroups and then removing the cgroup. Note that iolatency shouldn't have been enabled elsewhere in the system to ensure that removing the cgroup disables iolatency for the whole device. The following keeps flipping on and off iolatency on sda: echo +io > /sys/fs/cgroup/cgroup.subtree_control while true; do mkdir -p /sys/fs/cgroup/test echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency sleep 1 rmdir /sys/fs/cgroup/test sleep 1 done and there's concurrent fio generating direct rand reads: fio --name test --filename=/dev/sda --direct=1 --rw=randread \ --runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k while monitoring with the following drgn script: while True: for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()): for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list): blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node') pd = blkg.pd[prog['blkcg_policy_iolatency'].plid] if pd.value_() == 0: continue iolat = container_of(pd, 'struct iolatency_grp', 'pd') inflight = iolat.rq_wait.inflight.counter.value_() if inflight: print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} ' f'{cgroup_path(css.cgroup).decode("utf-8")}') time.sleep(1) The monitoring output looks like the following: inflight=1 sda /user.slice inflight=1 sda /user.slice ... inflight=14 sda /user.slice inflight=13 sda /user.slice inflight=17 sda /user.slice inflight=15 sda /user.slice inflight=18 sda /user.slice inflight=17 sda /user.slice inflight=20 sda /user.slice inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19 inflight=19 sda /user.slice inflight=19 sda /user.slice If a cgroup with stuck inflight ends up getting throttled, the throttled IOs will never get issued as there's no completion event to wake it up leading to an indefinite hang. This patch fixes the bug by unifying enable handling into a work item which is automatically kicked off from iolatency_set_min_lat_nsec() which is called from both iolatency_set_limit() and iolatency_pd_offline() paths. Punting to a work item is necessary as iolatency_pd_offline() is called under spinlocks while freezing a request_queue requires a sleepable context. This also simplifies the code reducing LOC sans the comments and avoids the unnecessary freezes which were happening whenever a cgroup's latency target is newly set or cleared.

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback The list_for_each_entry_safe() macro saves the current item (n) and the item after (n+1), so that n can be safely removed without corrupting the list. However, when traversing the list and removing items using gadget giveback, the DWC3 lock is briefly released, allowing other routines to execute. There is a situation where, while items are being removed ... In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback The list_for_each_entry_safe() macro saves the current item (n) and the item after (n+1), so that n can be safely removed without corrupting the list. However, when traversing the list and removing items using gadget giveback, the DWC3 lock is briefly released, allowing other routines to execute. There is a situation where, while items are being removed from the cancelled_list using dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable routine is running in parallel (due to UDC unbind). As the cleanup routine removes n, and the pullup disable removes n+1, once the cleanup retakes the DWC3 lock, it references a request who was already removed/handled. With list debug enabled, this leads to a panic. Ensure all instances of the macro are replaced where gadget giveback is used. Example call stack: Thread#1: __dwc3_gadget_ep_set_halt() - CLEAR HALT -> dwc3_gadget_ep_cleanup_cancelled_requests() ->list_for_each_entry_safe() ->dwc3_gadget_giveback(n) ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list] ->spin_unlock ->Thread#2 executes ... ->dwc3_gadget_giveback(n+1) ->Already removed! Thread#2: dwc3_gadget_pullup() ->waiting for dwc3 spin_lock ... ->Thread#1 released lock ->dwc3_stop_active_transfers() ->dwc3_remove_requests() ->fetches n+1 item from cancelled_list (n removed by Thread#1) ->dwc3_gadget_giveback() ->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list] ->spin_unlock

Show More

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Use tty_port_destroy() to destroy port In goldfish_tty_probe(), the port initialized through tty_port_init() should be destroyed in error paths.In goldfish_tty_remove(), qtty->port also should be destroyed or else might leak resources. Fix the above by calling tty_port_destroy().

In the Linux kernel, the following vulnerability has been resolved: ftrace: Clean up hash direct_functions on register failures We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 00 ... In the Linux kernel, the following vulnerability has been resolved: ftrace: Clean up hash direct_functions on register failures We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] <TASK> [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] </TASK> [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore.

Show More

In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan() This code has a check to prevent read overflow but it needs another check to prevent writing beyond the end of the ->Ssid[] array.

In the Linux kernel, the following vulnerability has been resolved: net: annotate races around sk->sk_bound_dev_if UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while this field can be changed by another thread. Adds minimal annotations to avoid KCSAN splats for UDP. Following patches will add more annotations to potential lockless readers. BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0: __ip6_datagram ... In the Linux kernel, the following vulnerability has been resolved: net: annotate races around sk->sk_bound_dev_if UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while this field can be changed by another thread. Adds minimal annotations to avoid KCSAN splats for UDP. Following patches will add more annotations to potential lockless readers. BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0: __ip6_datagram_connect+0x6e2/0x930 net/ipv6/datagram.c:221 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576 __sys_connect_file net/socket.c:1900 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888136d47a94 of 4 bytes by task 7670 on cpu 1: udpv6_sendmsg+0xc60/0x16e0 net/ipv6/udp.c:1436 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:652 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffff9b Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7670 Comm: syz-executor.3 Tainted: G W 5.18.0-rc1-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 I chose to not add Fixes: tag because race has minor consequences and stable teams busy enough.

Show More

In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Inhibit aborts if external loopback plug is inserted After running a short external loopback test, when the external loopback is removed and a normal cable inserted that is directly connected to a target device, the system oops in the llpfc_set_rrq_active() routine. When the loopback was inserted an FLOGI was transmit. As we're looped back, we receive the FLOGI request. The FLOGI is ABTS'd as we recognize the same ... In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Inhibit aborts if external loopback plug is inserted After running a short external loopback test, when the external loopback is removed and a normal cable inserted that is directly connected to a target device, the system oops in the llpfc_set_rrq_active() routine. When the loopback was inserted an FLOGI was transmit. As we're looped back, we receive the FLOGI request. The FLOGI is ABTS'd as we recognize the same wppn thus understand it's a loopback. However, as the ABTS sends address information the port is not set to (fffffe), the ABTS is dropped on the wire. A short 1 frame loopback test is run and completes before the ABTS times out. The looback is unplugged and the new cable plugged in, and the an FLOGI to the new device occurs and completes. Due to a mixup in ref counting the completion of the new FLOGI releases the fabric ndlp. Then the original ABTS completes and references the released ndlp generating the oops. Correct by no-op'ing the ABTS when in loopback mode (it will be dropped anyway). Added a flag to track the mode to recognize when it should be no-op'd.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add vblank register/unregister callback functions We encountered a kernel panic issue that callback data will be NULL when it's using in ovl irq handler. There is a timing issue between mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank(). To resolve this issue, we use the flow to register/unregister vblank cb: - Register callback function and callback data when crtc creates. - Unregister callback function an ... In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add vblank register/unregister callback functions We encountered a kernel panic issue that callback data will be NULL when it's using in ovl irq handler. There is a timing issue between mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank(). To resolve this issue, we use the flow to register/unregister vblank cb: - Register callback function and callback data when crtc creates. - Unregister callback function and callback data when crtc destroies. With this solution, we can assure callback data will not be NULL when vblank is disable.

Show More

In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: fix the pagelist corruption Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwr ... In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: fix the pagelist corruption Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwrite+0x57/0xc0 do_wp_page+0x278/0x2f0 __handle_mm_fault+0xdc2/0x1590 handle_mm_fault+0xdd/0x2c0 do_user_addr_fault+0x1d3/0x650 exc_page_fault+0x77/0x180 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fd98fc8fad1 == Figure out the race happens when one process is adding &page->lru into the pagelist tail in fb_deferred_io_mkwrite(), another process is re-initializing the same &page->lru in fb_deferred_io_fault(), which is not protected by the lock. This fix is to init all the page lists one time during initialization, it not only fixes the list corruption, but also avoids INIT_LIST_HEAD() redundantly. V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)

Show More

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: denali: Use managed device resources All of the resources used by this driver has managed interfaces, so use them. Otherwise we will get the following splat: [ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000 [ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5 [ 4.473538] nand: No NAND device found [ 4.474068] BUG: unable to handle page fault for addres ... In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: denali: Use managed device resources All of the resources used by this driver has managed interfaces, so use them. Otherwise we will get the following splat: [ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000 [ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5 [ 4.473538] nand: No NAND device found [ 4.474068] BUG: unable to handle page fault for address: ffffc90005000410 [ 4.475169] #PF: supervisor write access in kernel mode [ 4.475579] #PF: error_code(0x0002) - not-present page [ 4.478362] RIP: 0010:iowrite32+0x9/0x50 [ 4.486068] Call Trace: [ 4.486269] <IRQ> [ 4.486443] denali_isr+0x15b/0x300 [denali] [ 4.486788] ? denali_direct_write+0x50/0x50 [denali] [ 4.487189] __handle_irq_event_percpu+0x161/0x3b0 [ 4.487571] handle_irq_event+0x7d/0x1b0 [ 4.487884] handle_fasteoi_irq+0x2b0/0x770 [ 4.488219] __common_interrupt+0xc8/0x1b0 [ 4.488549] common_interrupt+0x9a/0xc0

Show More

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: Use kobject release() method to free dbs_data The struct dbs_data embeds a struct gov_attr_set and the struct gov_attr_set embeds a kobject. Since every kobject must have a release() method and we can't use kfree() to free it directly, so introduce cpufreq_dbs_data_release() to release the dbs_data via the kobject::release() method. This fixes the calltrace like below: ODEBUG: free active (active state 0) ... In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: Use kobject release() method to free dbs_data The struct dbs_data embeds a struct gov_attr_set and the struct gov_attr_set embeds a kobject. Since every kobject must have a release() method and we can't use kfree() to free it directly, so introduce cpufreq_dbs_data_release() to release the dbs_data via the kobject::release() method. This fixes the calltrace like below: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34 WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ #536 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001dfcf9a0 x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000 x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210 x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118 x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000 x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8 x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14 x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0 x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1d0/0x25c debug_check_no_obj_freed+0x24/0xa0 kfree+0x11c/0x440 cpufreq_dbs_governor_exit+0xa8/0xac cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x29c/0x570 store_scaling_governor+0x110/0x154 store+0xb0/0xe0 sysfs_kf_write+0x58/0x84 kernfs_fop_write_iter+0x12c/0x1c0 new_sync_write+0xf0/0x18c vfs_write+0x1cc/0x220 ksys_write+0x74/0x100 __arm64_sys_write+0x28/0x3c invoke_syscall.constprop.0+0x58/0xf0 do_el0_svc+0x70/0x170 el0_svc+0x54/0x190 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 irq event stamp: 189006 hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0 hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0 softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0 softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4 [ rjw: Because can be freed by the gov_attr_set_put() in cpufreq_dbs_governor_exit() now, it is also necessary to put the invocation of the governor ->exit() callback into the new cpufreq_dbs_data_release() function. ]

Show More