Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Validate hdwq pointers before dereferencing in reset/errata paths When the HBA is undergoing a reset or is handling an errata event, NULL ptr dereference crashes may occur in routines such as lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or lpfc_abort_handler(). Add NULL ptr checks before dereferencing hdwq pointers that may have been freed due to operations colliding with a reset or errata event handler.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix helper writes to read-only maps Lonial found an issue that despite user- and BPF-side frozen BPF map (like in case of .rodata), it was still possible to write into it from a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT} as arguments. In check_func_arg() when the argument is as mentioned, the meta->raw_mode is never set. Later, check_helper_mem_access(), under the case of PTR_TO_MAP_VALUE as r ... In the Linux kernel, the following vulnerability has been resolved: bpf: Fix helper writes to read-only maps Lonial found an issue that despite user- and BPF-side frozen BPF map (like in case of .rodata), it was still possible to write into it from a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT} as arguments. In check_func_arg() when the argument is as mentioned, the meta->raw_mode is never set. Later, check_helper_mem_access(), under the case of PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the subsequent call to check_map_access_type() and given the BPF map is read-only it succeeds. The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT when results are written into them as opposed to read out of them. The latter indicates that it's okay to pass a pointer to uninitialized memory as the memory is written to anyway. However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM just with additional alignment requirement. So it is better to just get rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the fixed size memory types. For this, add MEM_ALIGNED to additionally ensure alignment given these helpers write directly into the args via *<ptr> = val. The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>). MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated argument types, since in !MEM_FIXED_SIZE cases the verifier does not know the buffer size a priori and therefore cannot blindly write *<ptr> = val.

Show More

In the Linux kernel, the following vulnerability has been resolved: net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg When receiving proposal msg in server, the field iparea_offset and the field ipv6_prefixes_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field iparea_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks iparea_offset and ipv6_prefixes_c ... In the Linux kernel, the following vulnerability has been resolved: net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg When receiving proposal msg in server, the field iparea_offset and the field ipv6_prefixes_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field iparea_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks iparea_offset and ipv6_prefixes_cnt before using them.

Show More

In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c ... In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.

Show More

In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mma ... In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks]

Show More

In the Linux kernel, the following vulnerability has been resolved: net/smc: check smcd_v2_ext_offset when receiving proposal msg When receiving proposal msg in server, the field smcd_v2_ext_offset in proposal msg is from the remote client and can not be fully trusted. Once the value of smcd_v2_ext_offset exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks the value of smcd_v2_ext_offset before using it.

In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_ ... In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap().

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't access invalid sched Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") accessing job->base.sched can produce unexpected results as the initialisation of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the memset. This commit fixes an issue when a CS would fail validation and would be rejected after job->num_ibs is incremented. In this case, amdgpu_ib_free(ring->adev, ...) ... In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't access invalid sched Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") accessing job->base.sched can produce unexpected results as the initialisation of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the memset. This commit fixes an issue when a CS would fail validation and would be rejected after job->num_ibs is incremented. In this case, amdgpu_ib_free(ring->adev, ...) will be called, which would crash the machine because the ring value is bogus. To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this because the device is actually not used in this function. The next commit will remove the ring argument completely. (cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7)

Show More

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc() We handle errors here properly, ENOMEM isn't fatal, return the error.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check BIOS images before it is used BIOS images may fail to load and null checks are added before they are used. This fixes 6 NULL_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this ... In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this my masking the ring interrupts before ring stop request.

Show More

In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entr ... In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set.

Show More

In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0- ... In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac

Show More

In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable() When mtk-cmdq unbinds, a WARN_ON message with condition pm_runtime_get_sync() < 0 occurs. According to the call tracei below: cmdq_mbox_shutdown mbox_free_channel mbox_controller_unregister __devm_mbox_controller_unregister ... The root cause can be deduced to be calling pm_runtime_get_sync() after calling pm_runtime_disable() as ... In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable() When mtk-cmdq unbinds, a WARN_ON message with condition pm_runtime_get_sync() < 0 occurs. According to the call tracei below: cmdq_mbox_shutdown mbox_free_channel mbox_controller_unregister __devm_mbox_controller_unregister ... The root cause can be deduced to be calling pm_runtime_get_sync() after calling pm_runtime_disable() as observed below: 1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe() to bind the cmdq device to the mbox_controller, so devm_mbox_controller_unregister() will automatically unregister the device bound to the mailbox controller when the device-managed resource is removed. That means devm_mbox_controller_unregister() and cmdq_mbox_shoutdown() will be called after cmdq_remove(). 2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after devm_mbox_controller_register(), so that devm_pm_runtime_disable() will be called after cmdq_remove(), but before devm_mbox_controller_unregister(). To fix this problem, cmdq_probe() needs to move devm_mbox_controller_register() after devm_pm_runtime_enable() to make devm_pm_runtime_disable() be called after devm_mbox_controller_unregister().

Show More

In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential deadlock on __exfat_get_dentry_set When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array is allocated in __exfat_get_entry_set. The problem is that the bh-array is allocated with GFP_KERNEL. It does not make sense. In the following cases, a deadlock for sbi->s_lock between the two processes may occur. CPU0 CPU1 ---- ---- kswapd balance ... In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential deadlock on __exfat_get_dentry_set When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array is allocated in __exfat_get_entry_set. The problem is that the bh-array is allocated with GFP_KERNEL. It does not make sense. In the following cases, a deadlock for sbi->s_lock between the two processes may occur. CPU0 CPU1 ---- ---- kswapd balance_pgdat lock(fs_reclaim) exfat_iterate lock(&sbi->s_lock) exfat_readdir exfat_get_uniname_from_ext_entry exfat_get_dentry_set __exfat_get_dentry_set kmalloc_array ... lock(fs_reclaim) ... evict exfat_evict_inode lock(&sbi->s_lock) To fix this, let's allocate bh-array with GFP_NOFS.

Show More

In the Linux kernel, the following vulnerability has been resolved: closures: Change BUG_ON() to WARN_ON() If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON() For reference, this has popped up once in the CI, and we'll need more info to debug it: 03240 ------------[ cut here ]------------ 03240 kernel BUG at lib/closure.c:21! 03240 kernel BUG at lib/closure.c:21! 03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 03240 Modules linked in: 03240 CPU: 15 PID: 40534 Comm: k ... In the Linux kernel, the following vulnerability has been resolved: closures: Change BUG_ON() to WARN_ON() If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON() For reference, this has popped up once in the CI, and we'll need more info to debug it: 03240 ------------[ cut here ]------------ 03240 kernel BUG at lib/closure.c:21! 03240 kernel BUG at lib/closure.c:21! 03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 03240 Modules linked in: 03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570 03240 Hardware name: linux,dummy-virt (DT) 03240 Workqueue: btree_update btree_interior_update_work 03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 03240 pc : closure_put+0x224/0x2a0 03240 lr : closure_put+0x24/0x2a0 03240 sp : ffff0000d12071c0 03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360 03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040 03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168 03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001 03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974 03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d 03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e 03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b 03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954 03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000 03240 Call trace: 03240 closure_put+0x224/0x2a0 03240 bch2_check_for_deadlock+0x910/0x1028 03240 bch2_six_check_for_deadlock+0x1c/0x30 03240 six_lock_slowpath.isra.0+0x29c/0xed0 03240 six_lock_ip_waiter+0xa8/0xf8 03240 __bch2_btree_node_lock_write+0x14c/0x298 03240 bch2_trans_lock_write+0x6d4/0xb10 03240 __bch2_trans_commit+0x135c/0x5520 03240 btree_interior_update_work+0x1248/0x1c10 03240 process_scheduled_works+0x53c/0xd90 03240 worker_thread+0x370/0x8c8 03240 kthread+0x258/0x2e8 03240 ret_from_fork+0x10/0x20 03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000) 03240 ---[ end trace 0000000000000000 ]--- 03240 Kernel panic - not syncing: Oops - BUG: Fatal exception 03240 SMP: stopping secondary CPUs 03241 SMP: failed to stop secondary CPUs 13,15 03241 Kernel Offset: disabled 03241 CPU features: 0x00,00000003,80000008,4240500b 03241 Memory Limit: none 03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- 03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s

Show More

In the Linux kernel, the following vulnerability has been resolved: xfs: add bounds checking to xlog_recover_process_data There is a lack of verification of the space occupied by fixed members of xlog_op_header in the xlog_recover_process_data. We can create a crafted image to trigger an out of bounds read by following these steps: 1) Mount an image of xfs, and do some file operations to leave records 2) Before umounting, copy the image for subsequent steps to simulate abnormal ... In the Linux kernel, the following vulnerability has been resolved: xfs: add bounds checking to xlog_recover_process_data There is a lack of verification of the space occupied by fixed members of xlog_op_header in the xlog_recover_process_data. We can create a crafted image to trigger an out of bounds read by following these steps: 1) Mount an image of xfs, and do some file operations to leave records 2) Before umounting, copy the image for subsequent steps to simulate abnormal exit. Because umount will ensure that tail_blk and head_blk are the same, which will result in the inability to enter xlog_recover_process_data 3) Write a tool to parse and modify the copied image in step 2 4) Make the end of the xlog_op_header entries only 1 byte away from xlog_rec_header->h_size 5) xlog_rec_header->h_num_logops++ 6) Modify xlog_rec_header->h_crc Fix: Add a check to make sure there is sufficient space to access fixed members of xlog_op_header.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Fix FSM command timeout issue When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD ... In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Fix FSM command timeout issue When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:complete_all+0x3e/0xa0 [...] Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? complete_all+0x3e/0xa0 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xd8/0x110 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)] ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> [...] CR2: fffffffffffffff8 ---[ end trace 0000000000000000 ]--- Use the reference counter to ensure safe release as Sergey suggests: https://lore.kernel.org/all/[email protected]/

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which ... In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed.

Show More

In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol ... In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Show More

In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module ... In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions.

Show More

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's r ... In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain.

Show More

In the Linux kernel, the following vulnerability has been resolved: fpga: bridge: add owner module and take its refcount The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module ow ... In the Linux kernel, the following vulnerability has been resolved: fpga: bridge: add owner module and take its refcount The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions.

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Ensure 'ib_sge list' is accessible Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function. Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a 'BUG: kernel NULL pointer dereference'[1]. ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2d0 ? sear ... In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Ensure 'ib_sge list' is accessible Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function. Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a 'BUG: kernel NULL pointer dereference'[1]. ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2d0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? memcpy_orig+0xd5/0x140 rxe_mr_copy+0x1c3/0x200 [rdma_rxe] ? rxe_pool_get_index+0x4b/0x80 [rdma_rxe] copy_data+0xa5/0x230 [rdma_rxe] rxe_requester+0xd9b/0xf70 [rdma_rxe] ? finish_task_switch.isra.0+0x99/0x2e0 rxe_sender+0x13/0x40 [rdma_rxe] do_task+0x68/0x1e0 [rdma_rxe] process_one_work+0x177/0x330 worker_thread+0x252/0x390 ? __pfx_worker_thread+0x10/0x10 This change ensures the variable is available for subsequent operations that require it. [1] https://lore.kernel.org/linux-rdma/[email protected]/

Show More

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix not validating setsockopt user input Check user input length before copying data.

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is a ... In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.

Show More

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_put_smb_ses(). This can happen when (a) the client has connection to the server but no session or (b) another thread ends up setting @ses->ses_status again to something different than SES_EXITING. To fix this, we need to make sure to unc ... In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_put_smb_ses(). This can happen when (a) the client has connection to the server but no session or (b) another thread ends up setting @ses->ses_status again to something different than SES_EXITING. To fix this, we need to make sure to unconditionally set @ses->ses_status to SES_EXITING and prevent any other threads from setting a new status while we're still tearing it down. The following can be reproduced by adding some delay to right after the ipc is freed in __cifs_put_smb_ses() - which will give smb2_reconnect_server() worker a chance to run and then accessing @ses->ipc: kinit ... mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10 [disconnect srv] ls /mnt/1 &>/dev/null sleep 30 kdestroy [reconnect srv] sleep 10 umount /mnt/1 ... CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Workqueue: cifsiod smb2_reconnect_server [cifs] RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0 Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75 7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8 RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83 RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800 RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000 R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000 FS: 0000000000000000(0000) GS:ffff888157c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c1/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? __list_del_entry_valid_or_report+0x33/0xf0 __cifs_put_smb_ses+0x1ae/0x500 [cifs] smb2_reconnect_server+0x4ed/0x710 [cifs] process_one_work+0x205/0x6b0 worker_thread+0x191/0x360 ? __pfx_worker_thread+0x10/0x10 kthread+0xe2/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

Show More

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fixed overflow check in mi_enum_attr()

In the Linux kernel, the following vulnerability has been resolved: inet: inet_defrag: prevent sk release while still in use ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bu ... In the Linux kernel, the following vulnerability has been resolved: inet: inet_defrag: prevent sk release while still in use ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize.

Show More

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_regio ... In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Show More

In the Linux kernel, the following vulnerability has been resolved: IORING_OP_READ did not correctly consume the provided buffer list when read i/o returned < 0 (except for -EAGAIN and -EIOCBQUEUED return). This can lead to a potential use-after-free when the completion via io_rw_done runs at separate context.

In the Linux kernel, the following vulnerability has been resolved: media: aspeed: Fix memory overwrite if timing is 1600x900 When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on ... In the Linux kernel, the following vulnerability has been resolved: media: aspeed: Fix memory overwrite if timing is 1600x900 When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on OpenBMC's web The size of macro block captured is 8x8. Therefore, we should make sure the height of src-buf is 8 aligned to fix this issue.

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential key use-after-free When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to f ... In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential key use-after-free When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to fix, do that by returning an error code and converting that to success on the cfg80211 boundary only, leaving the error for bad callers of ieee80211_gtk_rekey_add().

Show More

In the Linux kernel, the following vulnerability has been resolved: sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected, cpu_max_bits_warn() generates a runtime warning similar as below when showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 sh ... In the Linux kernel, the following vulnerability has been resolved: sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected, cpu_max_bits_warn() generates a runtime warning similar as below when showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<900000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]---

Show More

In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); ... In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper limit is treated as an int, causing an overflow above 2^31 - 1. This leads "size" to wrap around and become negative (-184549328). The "size" is then passed to print_hex_dump() (called "len" in print_hex_dump()), it is passed as type size_t (an unsigned type), this is then stored inside a variable called "int remaining", which is then assigned to "int linelen" which is then passed to hex_dump_to_buffer(). In print_hex_dump() the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer() on each iteration: for (i = 0; i < len; i += rowsize) { linelen = min(remaining, rowsize); remaining -= rowsize; hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, linebuf, sizeof(linebuf), ascii); ... } The expected stopping condition (i < len) is effectively broken since len is corrupted and very large. This eventually leads to the "ptr+i" being passed to hex_dump_to_buffer() to get closer to the end of the actual bounds of "ptr", eventually an out of bounds access is done in hex_dump_to_buffer() in the following for loop: for (j = 0; j < len; j++) { if (linebuflen < lx + 2) goto overflow2; ch = ptr[j]; ... } To fix this we should validate "EALIST_SIZE(ea_buf->xattr)" before it is utilised.

Show More

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix UBSAN panic in samsung_clk_init() With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to dereferencing `ctx->clk_data.hws` before setting `ctx->clk_data.num = nr_clks`. Move that up to fix the crash. UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP <snip> Call trace: samsung_clk_init+0x110/0x124 (P) samsung_clk_init+0x48/0x124 (L) samsung_cmu_register_one+0x3c/0xa0 ... In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix UBSAN panic in samsung_clk_init() With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to dereferencing `ctx->clk_data.hws` before setting `ctx->clk_data.num = nr_clks`. Move that up to fix the crash. UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP <snip> Call trace: samsung_clk_init+0x110/0x124 (P) samsung_clk_init+0x48/0x124 (L) samsung_cmu_register_one+0x3c/0xa0 exynos_arm64_register_cmu+0x54/0x64 __gs101_cmu_top_of_clk_init_declare+0x28/0x60 ...

Show More

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc. After Kernel boots up, stop the rproc, load a new firmware which doesn't have resource table ,and start rproc. When starting rproc with a firmware not have resource table, `memcpy(loaded_table, rproc->cached_table, rproc->t ... In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc. After Kernel boots up, stop the rproc, load a new firmware which doesn't have resource table ,and start rproc. When starting rproc with a firmware not have resource table, `memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will trigger dump, because rproc->cache_table is set to NULL during the last stop operation, but rproc->table_sz is still valid. This issue is found on i.MX8MP and i.MX9. Dump as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_memcpy_generic+0x110/0x22c lr : rproc_start+0x88/0x1e0 Call trace: __pi_memcpy_generic+0x110/0x22c (P) rproc_boot+0x198/0x57c state_store+0x40/0x104 dev_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x120/0x1cc vfs_write+0x240/0x378 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xcc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c Clear rproc->table_sz to address the issue.

Show More

In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work ment ... In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ssip_xmit_work ssi_protocol_remove | kfree(ssi); | | struct hsi_client *cl = ssi->cl; | // use ssi Fix it by ensuring that the work is canceled before proceeding with the cleanup in ssi_protocol_remove().

Show More

In the Linux kernel, the following vulnerability has been resolved: sound/virtio: Fix cancel_sync warnings on uninitialized work_structs Betty reported hitting the following warning: [ 8.709131][ T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182 ... [ 8.713282][ T221] Call trace: [ 8.713365][ T221] __flush_work+0x8d0/0x914 [ 8.713468][ T221] __cancel_work_sync+0xac/0xfc [ 8.713570][ T221] cancel_work_sync+0x24/0x34 [ 8.713667][ T221] virtsnd_remove+0xa8/0xf ... In the Linux kernel, the following vulnerability has been resolved: sound/virtio: Fix cancel_sync warnings on uninitialized work_structs Betty reported hitting the following warning: [ 8.709131][ T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182 ... [ 8.713282][ T221] Call trace: [ 8.713365][ T221] __flush_work+0x8d0/0x914 [ 8.713468][ T221] __cancel_work_sync+0xac/0xfc [ 8.713570][ T221] cancel_work_sync+0x24/0x34 [ 8.713667][ T221] virtsnd_remove+0xa8/0xf8 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.713868][ T221] virtsnd_probe+0x48c/0x664 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.714035][ T221] virtio_dev_probe+0x28c/0x390 [ 8.714139][ T221] really_probe+0x1bc/0x4c8 ... It seems we're hitting the error path in virtsnd_probe(), which triggers a virtsnd_remove() which iterates over the substreams calling cancel_work_sync() on the elapsed_period work_struct. Looking at the code, from earlier in: virtsnd_probe()->virtsnd_build_devs()->virtsnd_pcm_parse_cfg() We set snd->nsubstreams, allocate the snd->substreams, and if we then hit an error on the info allocation or something in virtsnd_ctl_query_info() fails, we will exit without having initialized the elapsed_period work_struct. When that error path unwinds we then call virtsnd_remove() which as long as the substreams array is allocated, will iterate through calling cancel_work_sync() on the uninitialized work struct hitting this warning. Takashi Iwai suggested this fix, which initializes the substreams structure right after allocation, so that if we hit the error paths we avoid trying to cleanup uninitialized data. Note: I have not yet managed to reproduce the issue myself, so this patch has had limited testing. Feedback or thoughts would be appreciated!

Show More