| CVE |
Vendors |
Products |
Updated |
CVSS v2 |
CVSS v3 |
|
In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
Fix a memory leak on logi_dj_recv_send_report() error path.
|
|
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos/vidi: fix memory leak in .get_modes()
The duplicated EDID is never freed. Fix it.
|
|
In the Linux kernel, the following vulnerability has been resolved:
mptcp: ensure snd_una is properly initialized on connect
This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
|
|
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
In some versions of cfg80211, the ssids poinet might be a valid one even
though n_ssids is 0. Accessing the pointer in this case will cuase an
out-of-bound access. Fix this by checking n_ssids first.
|
In the Linux kernel, the following vulnerability has been resolved:
xhci: Handle TD clearing for multiple streams case
When multiple streams are in use, multiple TDs might be in flight when
an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for
each, to ensure everything is reset properly and the caches cleared.
Change the logic so that any N>1 TDs found active for different streams
are deferred until after the first one is processed, calling
xhci_invalidate_cancelled_tds() agai ...
In the Linux kernel, the following vulnerability has been resolved:
xhci: Handle TD clearing for multiple streams case
When multiple streams are in use, multiple TDs might be in flight when
an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for
each, to ensure everything is reset properly and the caches cleared.
Change the logic so that any N>1 TDs found active for different streams
are deferred until after the first one is processed, calling
xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to
queue another command until we are done with all of them. Also change
the error/"should never happen" paths to ensure we at least clear any
affected TDs, even if we can't issue a command to clear the hardware
cache, and complain loudly with an xhci_warn() if this ever happens.
This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct
assumptions about number of rings per endpoint.") early on in the XHCI
driver's life, when stream support was first added.
It was then identified but not fixed nor made into a warning in commit
674f8438c121 ("xhci: split handling halted endpoints into two steps"),
which added a FIXME comment for the problem case (without materially
changing the behavior as far as I can tell, though the new logic made
the problem more obvious).
Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some
cached cancelled URBs."), it was acknowledged again.
[Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached
cancelled URBs.") was a targeted regression fix to the previously mentioned
patch. Users reported issues with usb stuck after unmounting/disconnecting
UAS devices. This rolled back the TD clearing of multiple streams to its
original state.]
Apparently the commit author was aware of the problem (yet still chose
to submit it): It was still mentioned as a FIXME, an xhci_dbg() was
added to log the problem condition, and the remaining issue was mentioned
in the commit description. The choice of making the log type xhci_dbg()
for what is, at this point, a completely unhandled and known broken
condition is puzzling and unfortunate, as it guarantees that no actual
users would see the log in production, thereby making it nigh
undebuggable (indeed, even if you turn on DEBUG, the message doesn't
really hint at there being a problem at all).
It took me *months* of random xHC crashes to finally find a reliable
repro and be able to do a deep dive debug session, which could all have
been avoided had this unhandled, broken condition been actually reported
with a warning, as it should have been as a bug intentionally left in
unfixed (never mind that it shouldn't have been left in at all).
> Another fix to solve clearing the caches of all stream rings with
> cancelled TDs is needed, but not as urgent.
3 years after that statement and 14 years after the original bug was
introduced, I think it's finally time to fix it. And maybe next time
let's not leave bugs unfixed (that are actually worse than the original
bug), and let's actually get people to review kernel commits please.
Fixes xHC crashes and IOMMU faults with UAS devices when handling
errors/faults. Easiest repro is to use `hdparm` to mark an early sector
(e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop.
At least in the case of JMicron controllers, the read errors end up
having to cancel two TDs (for two queued requests to different streams)
and the one that didn't get cleared properly ends up faulting the xHC
entirely when it tries to access DMA pages that have since been unmapped,
referred to by the stale TDs. This normally happens quickly (after two
or three loops). After this fix, I left the `cat` in a loop running
overnight and experienced no xHC failures, with all read errors
recovered properly. Repro'd and tested on an Apple M1 Mac Mini
(dwc3 host).
On systems without an IOMMU, this bug would instead silently corrupt
freed memory, making this a
---truncated---
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dpt: Make DPT object unshrinkable
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
[vsyrjala: Add TODO comment]
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c)
|
|
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
Pass the already obtained vlan group pointer to br_mst_vlan_set_state()
instead of dereferencing it again. Each caller has already correctly
dereferenced it for their context. This change is required for the
following suspicious RCU dereference fix. No functional changes
intended.
|
|
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
I converted br_mst_set_state to RCU to avoid a vlan use-after-free
but forgot to change the vlan group dereference helper. Switch to vlan
group RCU deref helper to fix the suspicious rcu usage warning.
|
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Ad ...
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issu ...
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
__kernel_map_pages() is a debug function which clears the valid bit in page
table entry for deallocated pages to detect illegal memory accesses to
freed pages.
This function set/clear the valid bit using __set_memory(). __set_memory()
acquires init_mm's semaphore, and this operation may sleep. This is
problematic, because __kernel_map_pages() can be calle ...
In the Linux kernel, the following vulnerability has been resolved:
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
__kernel_map_pages() is a debug function which clears the valid bit in page
table entry for deallocated pages to detect illegal memory accesses to
freed pages.
This function set/clear the valid bit using __set_memory(). __set_memory()
acquires init_mm's semaphore, and this operation may sleep. This is
problematic, because __kernel_map_pages() can be called in atomic context,
and thus is illegal to sleep. An example warning that this causes:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
preempt_count: 2, expected: 0
CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff800060dc>] dump_backtrace+0x1c/0x24
[<ffffffff8091ef6e>] show_stack+0x2c/0x38
[<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72
[<ffffffff8092bb24>] dump_stack+0x14/0x1c
[<ffffffff8003b7ac>] __might_resched+0x104/0x10e
[<ffffffff8003b7f4>] __might_sleep+0x3e/0x62
[<ffffffff8093276a>] down_write+0x20/0x72
[<ffffffff8000cf00>] __set_memory+0x82/0x2fa
[<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4
[<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a
[<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba
[<ffffffff80011904>] copy_process+0x72c/0x17ec
[<ffffffff80012ab4>] kernel_clone+0x60/0x2fe
[<ffffffff80012f62>] kernel_thread+0x82/0xa0
[<ffffffff8003552c>] kthreadd+0x14a/0x1be
[<ffffffff809357de>] ret_from_fork+0xe/0x1c
Rewrite this function with apply_to_existing_page_range(). It is fine to
not have any locking, because __kernel_map_pages() works with pages being
allocated/deallocated and those pages are not changed by anyone else in the
meantime.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: don't unpoison huge_zero_folio
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f ...
In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: don't unpoison huge_zero_folio
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_shrink_slab+0x14f/0x6a0
shrink_slab+0xca/0x8c0
shrink_node+0x2d0/0x7d0
balance_pgdat+0x33a/0x720
kswapd+0x1f3/0x410
kthread+0xd5/0x100
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt. But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.
Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd ...
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd_install(),
and the kernel should not call close_fd() after that, i.e., it should call
fd_install() after everything is ready, thus fd_install() is called after
copy_to_user() succeeds.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to
synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from
softirq context. However using only spin_lock() to get sta->ps_lock in
ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute
on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to
take this same ...
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to
synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from
softirq context. However using only spin_lock() to get sta->ps_lock in
ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute
on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to
take this same lock ending in deadlock. Below is an example of rcu stall
that arises in such situation.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996
rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4)
CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742
Hardware name: RPT (r1) (DT)
pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : queued_spin_lock_slowpath+0x58/0x2d0
lr : invoke_tx_handlers_early+0x5b4/0x5c0
sp : ffff00001ef64660
x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8
x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000
x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000
x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000
x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80
x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da
x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440
x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880
x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8
Call trace:
queued_spin_lock_slowpath+0x58/0x2d0
ieee80211_tx+0x80/0x12c
ieee80211_tx_pending+0x110/0x278
tasklet_action_common.constprop.0+0x10c/0x144
tasklet_action+0x20/0x28
_stext+0x11c/0x284
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
do_softirq+0x74/0x7c
__local_bh_enable_ip+0xa0/0xa4
_ieee80211_wake_txqs+0x3b0/0x4b8
__ieee80211_wake_queue+0x12c/0x168
ieee80211_add_pending_skbs+0xec/0x138
ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480
ieee80211_mps_sta_status_update.part.0+0xd8/0x11c
ieee80211_mps_sta_status_update+0x18/0x24
sta_apply_parameters+0x3bc/0x4c0
ieee80211_change_station+0x1b8/0x2dc
nl80211_set_station+0x444/0x49c
genl_family_rcv_msg_doit.isra.0+0xa4/0xfc
genl_rcv_msg+0x1b0/0x244
netlink_rcv_skb+0x38/0x10c
genl_rcv+0x34/0x48
netlink_unicast+0x254/0x2bc
netlink_sendmsg+0x190/0x3b4
____sys_sendmsg+0x1e8/0x218
___sys_sendmsg+0x68/0x8c
__sys_sendmsg+0x44/0x84
__arm64_sys_sendmsg+0x20/0x28
do_el0_svc+0x6c/0xe8
el0_svc+0x14/0x48
el0t_64_sync_handler+0xb0/0xb4
el0t_64_sync+0x14c/0x150
Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise
on the same CPU that is holding the lock.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Lock wiphy in cfg80211_get_station
Wiphy should be locked before calling rdev_get_station() (see lockdep
assert in ieee80211_get_station()).
This fixes the following kernel NULL dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
...
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Lock wiphy in cfg80211_get_station
Wiphy should be locked before calling rdev_get_station() (see lockdep
assert in ieee80211_get_station()).
This fixes the following kernel NULL dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000
[0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath
CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705
Hardware name: RPT (r1) (DT)
Workqueue: bat_events batadv_v_elp_throughput_metric_update
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core]
lr : sta_set_sinfo+0xcc/0xbd4
sp : ffff000007b43ad0
x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98
x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000
x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc
x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000
x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d
x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e
x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000
x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000
x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90
x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000
Call trace:
ath10k_sta_statistics+0x10/0x2dc [ath10k_core]
sta_set_sinfo+0xcc/0xbd4
ieee80211_get_station+0x2c/0x44
cfg80211_get_station+0x80/0x154
batadv_v_elp_get_throughput+0x138/0x1fc
batadv_v_elp_throughput_metric_update+0x1c/0xa4
process_one_work+0x1ec/0x414
worker_thread+0x70/0x46c
kthread+0xdc/0xe0
ret_from_fork+0x10/0x20
Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814)
This happens because STA has time to disconnect and reconnect before
batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In
this situation, ath10k_sta_state() can be in the middle of resetting
arsta data when the work queue get chance to be scheduled and ends up
accessing it. Locking wiphy prevents that.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount imbalance on inbound connections
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors: ...
In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount imbalance on inbound connections
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors:
refcount_t: decrement hit 0; leaking memory.
refcount_t: underflow; use-after-free.
And will then have a trace like:
Call Trace:
<TASK>
? show_regs+0x64/0x70
? __warn+0x83/0x120
? refcount_warn_saturate+0xb2/0x100
? report_bug+0x158/0x190
? prb_read_valid+0x20/0x30
? handle_bug+0x3e/0x70
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? refcount_warn_saturate+0xb2/0x100
? refcount_warn_saturate+0xb2/0x100
ax25_release+0x2ad/0x360
__sock_release+0x35/0xa0
sock_close+0x19/0x20
[...]
On reboot (or any attempt to remove the interface), the kernel gets
stuck in an infinite loop:
unregister_netdevice: waiting for ax0 to become free. Usage count = 0
This patch corrects these issues by ensuring that we call netdev_hold()
and ax25_dev_hold() for new connections in ax25_accept(). This makes the
logic leading to ax25_accept() match the logic for ax25_bind(): in both
cases we increment the refcount, which is ultimately decremented in
ax25_release().
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
bpf: Set run context for rawtp test_run callback
syzbot reported crash when rawtp program executed through the
test_run interface calls bpf_get_attach_cookie helper or any
other helper that touches task->bpf_ctx pointer.
Setting the run context (task->bpf_ctx pointer) for test_run
callback.
|
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Always stop health timer during driver removal
Currently, if teardown_hca fails to execute during driver removal, mlx5
does not stop the health timer. Afterwards, mlx5 continue with driver
teardown. This may lead to a UAF bug, which results in page fault
Oops[1], since the health timer invokes after resources were freed.
Hence, stop the health monitor even if teardown_hca fails.
[1]
mlx5_core 0000:18:00.0: E-Switch ...
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Always stop health timer during driver removal
Currently, if teardown_hca fails to execute during driver removal, mlx5
does not stop the health timer. Afterwards, mlx5 continue with driver
teardown. This may lead to a UAF bug, which results in page fault
Oops[1], since the health timer invokes after resources were freed.
Hence, stop the health monitor even if teardown_hca fails.
[1]
mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: cleanup
mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource
mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup
BUG: unable to handle page fault for address: ffffa26487064230
PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020
RIP: 0010:ioread32be+0x34/0x60
RSP: 0018:ffffa26480003e58 EFLAGS: 00010292
RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0
RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230
RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8
R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0
R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0
FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x175/0x180
? asm_exc_page_fault+0x26/0x30
? __pfx_poll_health+0x10/0x10 [mlx5_core]
? __pfx_poll_health+0x10/0x10 [mlx5_core]
? ioread32be+0x34/0x60
mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core]
? __pfx_poll_health+0x10/0x10 [mlx5_core]
poll_health+0x42/0x230 [mlx5_core]
? __next_timer_interrupt+0xbc/0x110
? __pfx_poll_health+0x10/0x10 [mlx5_core]
call_timer_fn+0x21/0x130
? __pfx_poll_health+0x10/0x10 [mlx5_core]
__run_timers+0x222/0x2c0
run_timer_softirq+0x1d/0x40
__do_softirq+0xc9/0x2c8
__irq_exit_rcu+0xa6/0xc0
sysvec_apic_timer_interrupt+0x72/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:cpuidle_enter_state+0xcc/0x440
? cpuidle_enter_state+0xbd/0x440
cpuidle_enter+0x2d/0x40
do_idle+0x20d/0x270
cpu_startup_entry+0x2a/0x30
rest_init+0xd0/0xd0
arch_call_rest_init+0xe/0x30
start_kernel+0x709/0xa90
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x96/0xa0
secondary_startup_64_no_verify+0x18f/0x19b
---[ end trace 0000000000000000 ]---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible race in __fib6_drop_pcpu_from()
syzbot found a race in __fib6_drop_pcpu_from() [1]
If compiler reads more than once (*ppcpu_rt),
second read could read NULL, if another cpu clears
the value in rt6_get_pcpu_route().
Add a READ_ONCE() to prevent this race.
Also add rcu_read_lock()/rcu_read_unlock() because
we rely on RCU protection while dereferencing pcpu_rt.
[1]
Oops: general protection fault, probably ...
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible race in __fib6_drop_pcpu_from()
syzbot found a race in __fib6_drop_pcpu_from() [1]
If compiler reads more than once (*ppcpu_rt),
second read could read NULL, if another cpu clears
the value in rt6_get_pcpu_route().
Add a READ_ONCE() to prevent this race.
Also add rcu_read_lock()/rcu_read_unlock() because
we rely on RCU protection while dereferencing pcpu_rt.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd584ff5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Workqueue: netns cleanup_net
RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984
Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48
RSP: 0018:ffffc900040df070 EFLAGS: 00010206
RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16
RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091
RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8
R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline]
fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline]
fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038
fib6_del_route net/ipv6/ip6_fib.c:1998 [inline]
fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043
fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205
fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127
fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175
fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255
__fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271
rt6_sync_down_dev net/ipv6/route.c:4906 [inline]
rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911
addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855
addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778
notifier_call_chain+0xb9/0x410 kernel/notifier.c:93
call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992
call_netdevice_notifiers_extack net/core/dev.c:2030 [inline]
call_netdevice_notifiers net/core/dev.c:2044 [inline]
dev_close_many+0x333/0x6a0 net/core/dev.c:1585
unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193
unregister_netdevice_many net/core/dev.c:11276 [inline]
default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759
ops_exit_list+0x128/0x180 net/core/net_namespace.c:178
cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: so ...
In the Linux kernel, the following vulnerability has been resolved:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited().
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
There could be a potential use-after-free case in
tcpm_register_source_caps(). This could happen when:
* new (say invalid) source caps are advertised
* the existing source caps are unregistered
* tcpm_register_source_caps() returns with an error as
usb_power_delivery_register_capabilities() fails
This causes port->partner_source_caps to hold on to th ...
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
There could be a potential use-after-free case in
tcpm_register_source_caps(). This could happen when:
* new (say invalid) source caps are advertised
* the existing source caps are unregistered
* tcpm_register_source_caps() returns with an error as
usb_power_delivery_register_capabilities() fails
This causes port->partner_source_caps to hold on to the now freed source
caps.
Reset port->partner_source_caps value to NULL after unregistering
existing source caps.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
jfs: xattr: fix buffer overflow for invalid xattr
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
|
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/ ...
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965
For full log, please look at [1].
Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.
[1] Link: https://lore.kernel.org/all/[email protected]/
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: remove requests from xarray during flushing requests
Even with CACHEFILES_DEAD set, we can still read the requests, so in the
following concurrency the request may be used after it has been freed:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_le ...
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: remove requests from xarray during flushing requests
Even with CACHEFILES_DEAD set, we can still read the requests, so in the
following concurrency the request may be used after it has been freed:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
// close dev fd
cachefiles_flush_reqs
complete(&REQ_A->done)
kfree(REQ_A)
xa_lock(&cache->reqs);
cachefiles_ondemand_select_req
req->msg.opcode != CACHEFILES_OP_READ
// req use-after-free !!!
xa_unlock(&cache->reqs);
xa_destroy(&cache->reqs)
Hence remove requests from cache->reqs when flushing them to avoid
accessing freed requests.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0
Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962
CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7 ...
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0
Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962
CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7-dirty #542
Call Trace:
kasan_report+0x94/0xc0
cachefiles_ondemand_daemon_read+0x609/0xab0
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 626:
__kmalloc+0x1df/0x4b0
cachefiles_ondemand_send_req+0x24d/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 626:
kfree+0xf1/0x2c0
cachefiles_ondemand_send_req+0x568/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
copy_to_user(_buffer, msg, n)
process_open_req(REQ_A)
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW);
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
write(devfd, ("copen %u,%llu", msg->msg_id, size));
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
cachefiles_ondemand_get_fd(REQ_A)
fd = get_unused_fd_flags
file = anon_inode_getfile
fd_install(fd, file)
load = (void *)REQ_A->msg.data;
load->fd = fd;
// load UAF !!!
This issue is caused by issuing a restore command when the daemon is still
alive, which results in a request being processed multiple times thus
triggering a UAF. So to avoid this problem, add an additional reference
count to cachefiles_req, which is held while waiting and reading, and then
released when the waiting and reading is over.
Note that since there is only one reference count for waiting, we need to
avoid the same request being completed multiple times, so we can only
complete the request if it is successfully removed from the xarray.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-d ...
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564
Call Trace:
kasan_report+0x93/0xc0
cachefiles_ondemand_daemon_read+0xb41/0xb60
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 116:
kmem_cache_alloc+0x140/0x3a0
cachefiles_lookup_cookie+0x140/0xcd0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 792:
kmem_cache_free+0xfe/0x390
cachefiles_put_object+0x241/0x480
fscache_cookie_state_machine+0x5c8/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object(object)
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
msg->object_id = req->object->ondemand->ondemand_id
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
copy_to_user(_buffer, msg, n)
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
------ close(fd) ------
cachefiles_ondemand_fd_release
cachefiles_put_object
cachefiles_put_object
kmem_cache_free(cachefiles_object_jar, object)
REQ_A->object->ondemand->ondemand_id
// object UAF !!!
When we see the request within xa_lock, req->object must not have been
freed yet, so grab the reference count of object before xa_unlock to
avoid the above issue.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
HID: core: remove unnecessary WARN_ON() in implement()
Syzkaller hit a warning [1] in a call to implement() when trying
to write a value into a field of smaller size in an output report.
Since implement() already has a warn message printed out with the
help of hid_warn() and value in question gets trimmed with:
...
value &= m;
...
WARN_ON may be considered superfluous. Remove it to suppress future
syzkaller triggers.
[1]
...
In the Linux kernel, the following vulnerability has been resolved:
HID: core: remove unnecessary WARN_ON() in implement()
Syzkaller hit a warning [1] in a call to implement() when trying
to write a value into a field of smaller size in an output report.
Since implement() already has a warn message printed out with the
help of hid_warn() and value in question gets trimmed with:
...
value &= m;
...
WARN_ON may be considered superfluous. Remove it to suppress future
syzkaller triggers.
[1]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863
Modules linked in:
CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline]
RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863
...
Call Trace:
<TASK>
__usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline]
usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636
hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash problem in concurrent scenario
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
|
In the Linux kernel, the following vulnerability has been resolved:
liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_ ...
In the Linux kernel, the following vulnerability has been resolved:
liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_info
...search in the dispatch_list...
->disp_fn(rdisp->rinfo, ...)
lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...)
In this path there is no code which sets pg_info->page to NULL.
So this check looks unneeded and doesn't solve potential problem.
But I guess the author had reason to add a check and I have no such card
and can't do real test.
In addition, the code in the function liquidio_push_packet() in
liquidio/lio_core.c does exactly the same.
Based on this, I consider the most acceptable compromise solution to
adjust this issue by moving skb_add_rx_frag() into conditional scope.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
drm/komeda: check for error-valued pointer
komeda_pipeline_get_state() may return an error-valued pointer, thus
check the pointer for negative or null value before dereferencing.
|
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch ...
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ionic: fix use after netif_napi_del()
When queues are started, netif_napi_add() and napi_enable() are called.
If there are 4 queues and only 3 queues are used for the current
configuration, only 3 queues' napi should be registered and enabled.
The ionic_qcq_enable() checks whether the .poll pointer is not NULL for
enabling only the using queue' napi. Unused queues' napi will not be
registered by netif_napi_add(), so the .poll ...
In the Linux kernel, the following vulnerability has been resolved:
ionic: fix use after netif_napi_del()
When queues are started, netif_napi_add() and napi_enable() are called.
If there are 4 queues and only 3 queues are used for the current
configuration, only 3 queues' napi should be registered and enabled.
The ionic_qcq_enable() checks whether the .poll pointer is not NULL for
enabling only the using queue' napi. Unused queues' napi will not be
registered by netif_napi_add(), so the .poll pointer indicates NULL.
But it couldn't distinguish whether the napi was unregistered or not
because netif_napi_del() doesn't reset the .poll pointer to NULL.
So, ionic_qcq_enable() calls napi_enable() for the queue, which was
unregistered by netif_napi_del().
Reproducer:
ethtool -L <interface name> rx 1 tx 1 combined 0
ethtool -L <interface name> rx 0 tx 0 combined 1
ethtool -L <interface name> rx 0 tx 0 combined 4
Splat looks like:
kernel BUG at net/core/dev.c:6666!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16
Workqueue: events ionic_lif_deferred_work [ionic]
RIP: 0010:napi_enable+0x3b/0x40
Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f
RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28
RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20
FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? die+0x33/0x90
? do_trap+0xd9/0x100
? napi_enable+0x3b/0x40
? do_error_trap+0x83/0xb0
? napi_enable+0x3b/0x40
? napi_enable+0x3b/0x40
? exc_invalid_op+0x4e/0x70
? napi_enable+0x3b/0x40
? asm_exc_invalid_op+0x16/0x20
? napi_enable+0x3b/0x40
ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8]
process_one_work+0x145/0x360
worker_thread+0x2bb/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
sock_map: avoid race between sock_map_close and sk_psock_put
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one create ...
In the Linux kernel, the following vulnerability has been resolved:
sock_map: avoid race between sock_map_close and sk_psock_put
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one creates a socket, adds it to the map and closes it.
That will trigger the WARN_ON_ONCE:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Modules linked in:
CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02
RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293
RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000
RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0
RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3
R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840
R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870
FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0
Call Trace:
<TASK>
unix_release+0x87/0xc0 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0xbe/0x240 net/socket.c:1421
__fput+0x42b/0x8a0 fs/file_table.c:422
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close fs/open.c:1541 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1541
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb37d618070
Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c
RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070
RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Use sk_psock, which will only check that the pointer is not been set to
NULL yet, which should only happen after the callbacks are restored. If,
then, a reference can still be gotten, we may call sk_psock_stop and cancel
psock->work.
As suggested by Paolo Abeni, reorder the condition so the control flow is
less convoluted.
After that change, the reproducer does not trigger the WARN_ON_ONCE
anymore.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
vmci: prevent speculation leaks by sanitizing event in event_deliver()
Coverity spotted that event_msg is controlled by user-space,
event_msg->event_data.event is passed to event_deliver() and used
as an index without sanitization.
This change ensures that the event index is sanitized to mitigate any
possibility of speculative information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Tes ...
In the Linux kernel, the following vulnerability has been resolved:
vmci: prevent speculation leaks by sanitizing event in event_deliver()
Coverity spotted that event_msg is controlled by user-space,
event_msg->event_data.event is passed to event_deliver() and used
as an index without sanitization.
This change ensures that the event index is sanitized to mitigate any
possibility of speculative information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Only compile tested, no access to HW.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem ...
In the Linux kernel, the following vulnerability has been resolved:
drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers.
It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset);
ptr[0] = 0;
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
greybus: Fix use-after-free bug in gb_interface_release due to race condition.
In gb_interface_create, &intf->mode_switch_completion is bound with
gb_interface_mode_switch_work. Then it will be started by
gb_interface_request_mode_switch. Here is the relevant code.
if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
...
}
If we call gb_interface_release to make cleanup, there may be an
unfinished work. This function ...
In the Linux kernel, the following vulnerability has been resolved:
greybus: Fix use-after-free bug in gb_interface_release due to race condition.
In gb_interface_create, &intf->mode_switch_completion is bound with
gb_interface_mode_switch_work. Then it will be started by
gb_interface_request_mode_switch. Here is the relevant code.
if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
...
}
If we call gb_interface_release to make cleanup, there may be an
unfinished work. This function will call kfree to free the object
"intf". However, if gb_interface_mode_switch_work is scheduled to
run after kfree, it may cause use-after-free error as
gb_interface_mode_switch_work will use the object "intf".
The possible execution flow that may lead to the issue is as follows:
CPU0 CPU1
| gb_interface_create
| gb_interface_request_mode_switch
gb_interface_release |
kfree(intf) (free) |
| gb_interface_mode_switch_work
| mutex_lock(&intf->mutex) (use)
Fix it by canceling the work before kfree.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6 ...
In the Linux kernel, the following vulnerability has been resolved:
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warn ...
In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text)
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
includes support for __GFP_NOFAIL, but it presents a conflict with commit
dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A
possible scenario is as follows:
process-a
__vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL)
__vmalloc_area_node()
vm_area_al ...
In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
includes support for __GFP_NOFAIL, but it presents a conflict with commit
dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A
possible scenario is as follows:
process-a
__vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL)
__vmalloc_area_node()
vm_area_alloc_pages()
--> oom-killer send SIGKILL to process-a
if (fatal_signal_pending(current)) break;
--> return NULL;
To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages()
if __GFP_NOFAIL set.
This issue occurred during OPLUS KASAN TEST. Below is part of the log
-> oom-killer sends signal to process
[65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198
[65731.259685] [T32454] Call trace:
[65731.259698] [T32454] dump_backtrace+0xf4/0x118
[65731.259734] [T32454] show_stack+0x18/0x24
[65731.259756] [T32454] dump_stack_lvl+0x60/0x7c
[65731.259781] [T32454] dump_stack+0x18/0x38
[65731.259800] [T32454] mrdump_common_die+0x250/0x39c [mrdump]
[65731.259936] [T32454] ipanic_die+0x20/0x34 [mrdump]
[65731.260019] [T32454] atomic_notifier_call_chain+0xb4/0xfc
[65731.260047] [T32454] notify_die+0x114/0x198
[65731.260073] [T32454] die+0xf4/0x5b4
[65731.260098] [T32454] die_kernel_fault+0x80/0x98
[65731.260124] [T32454] __do_kernel_fault+0x160/0x2a8
[65731.260146] [T32454] do_bad_area+0x68/0x148
[65731.260174] [T32454] do_mem_abort+0x151c/0x1b34
[65731.260204] [T32454] el1_abort+0x3c/0x5c
[65731.260227] [T32454] el1h_64_sync_handler+0x54/0x90
[65731.260248] [T32454] el1h_64_sync+0x68/0x6c
[65731.260269] [T32454] z_erofs_decompress_queue+0x7f0/0x2258
--> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL);
kernel panic by NULL pointer dereference.
erofs assume kvmalloc with __GFP_NOFAIL never return NULL.
[65731.260293] [T32454] z_erofs_runqueue+0xf30/0x104c
[65731.260314] [T32454] z_erofs_readahead+0x4f0/0x968
[65731.260339] [T32454] read_pages+0x170/0xadc
[65731.260364] [T32454] page_cache_ra_unbounded+0x874/0xf30
[65731.260388] [T32454] page_cache_ra_order+0x24c/0x714
[65731.260411] [T32454] filemap_fault+0xbf0/0x1a74
[65731.260437] [T32454] __do_fault+0xd0/0x33c
[65731.260462] [T32454] handle_mm_fault+0xf74/0x3fe0
[65731.260486] [T32454] do_mem_abort+0x54c/0x1b34
[65731.260509] [T32454] el0_da+0x44/0x94
[65731.260531] [T32454] el0t_64_sync_handler+0x98/0xb4
[65731.260553] [T32454] el0t_64_sync+0x198/0x19c
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix log recovery buffer allocation for the legacy h_size fixup
Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by
mkfs") added a fixup for incorrect h_size values used for the initial
umount record in old xfsprogs versions. Later commit 0c771b99d6c9
("xfs: clean up calculation of LR header blocks") cleaned up the log
reover buffer calculation, but stoped using the fixed up h_size value
to size the log ...
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix log recovery buffer allocation for the legacy h_size fixup
Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by
mkfs") added a fixup for incorrect h_size values used for the initial
umount record in old xfsprogs versions. Later commit 0c771b99d6c9
("xfs: clean up calculation of LR header blocks") cleaned up the log
reover buffer calculation, but stoped using the fixed up h_size value
to size the log recovery buffer, which can lead to an out of bounds
access when the incorrect h_size does not come from the old mkfs
tool, but a fuzzer.
Fix this by open coding xlog_logrec_hblks and taking the fixed h_size
into account for this calculation.
Show More
|