Vulnerabilities (CVE)

A Remote Code Execution vulnerability was identified in HPE Intelligent Management Center (iMC) Wireless Services Manager Software earlier than version IMC WSM 7.3 E0506P02.

A potential remote denial of service security vulnerability has been identified in HPE Integrated Lights Out 4 prior to v2.60 and iLO 5 for Gen 10 servers prior to v1.30.

A potential security vulnerability has been identified in HPE OfficeConnect 1810 Switch Series (HP 1810-24G - P.2.22 and previous versions, HP 1810-48G PK.1.34 and previous versions, HP 1810-8 v2 P.2.22 and previous versions). The vulnerability could allow local disclosure of sensitive information.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-4.4.0.GA-110(MU7). The vulnerability may be locally exploited to allow disclosure of privileged information.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-4.4.0.GA-110(MU7). The vulnerability may be exploited remotely to allow code execution.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-4.4.0.GA-110(MU7). The vulnerability may be exploited remotely to allow access restriction bypass.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-5.0.0.0-22913(GA). The vulnerability may be exploited locally to allow disclosure of privileged information.

A security vulnerability in HPE Integrated Lights-Out 3 prior to v1.90, iLO 4 prior to v2.60, iLO 5 prior to v1.30, Moonshot Chassis Manager firmware prior to v1.58, and Moonshot Component Pack prior to v2.55 could be remotely exploited to create a denial of service.

A vulnerability exists in the firmware of embedded BLE radios that are part of some Aruba Access points. An attacker who is able to exploit the vulnerability could install new, potentially malicious firmware into the AP's BLE radio and could then gain access to the AP's console port. This vulnerability is applicable only if the BLE radio has been enabled in affected access points. The BLE radio is disabled by default. Note - Aruba products are NOT affected by a similar vulnerability being tracke ... A vulnerability exists in the firmware of embedded BLE radios that are part of some Aruba Access points. An attacker who is able to exploit the vulnerability could install new, potentially malicious firmware into the AP's BLE radio and could then gain access to the AP's console port. This vulnerability is applicable only if the BLE radio has been enabled in affected access points. The BLE radio is disabled by default. Note - Aruba products are NOT affected by a similar vulnerability being tracked as CVE-2018-16986.

Show More

A remote code execution was identified in HPE Integrated Lights-Out 4 (iLO 4) earlier than version v2.60 and HPE Integrated Lights-Out 5 (iLO 5) earlier than version v1.30.

A security vulnerability in HPE XP P9000 Command View Advanced Edition (CVAE) Device Manager (DevMgr 8.5.0-00 and prior to 8.6.0-00), Configuration Manager (CM 8.5.0-00 and prior to 8.6.0-00) could be exploited to allow local and remote unauthorized access to sensitive information.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (iMC) PLAT 7.3 E0506P07. The vulnerability was resolved in iMC PLAT 7.3 E0605P04 or subsequent version.

An unauthenticated remote command execution exists in Aruba ClearPass Policy Manager on linked devices. The ClearPass OnConnect feature permits administrators to link other network devices into ClearPass for the purpose of collecting enhanced information about connected endpoints. A defect in the API could allow a remote attacker to execute arbitrary commands on one of the linked devices. This vulnerability is only applicable if credentials for devices have been supplied to ClearPass under Confi ... An unauthenticated remote command execution exists in Aruba ClearPass Policy Manager on linked devices. The ClearPass OnConnect feature permits administrators to link other network devices into ClearPass for the purpose of collecting enhanced information about connected endpoints. A defect in the API could allow a remote attacker to execute arbitrary commands on one of the linked devices. This vulnerability is only applicable if credentials for devices have been supplied to ClearPass under Configuration -> Network -> Devices -> CLI Settings. Resolution: Fixed in 6.7.5 and 6.6.10-hotfix.

Show More

The VMware Workspace ONE Unified Endpoint Management Console (A/W Console) 9.7.x prior to 9.7.0.3, 9.6.x prior to 9.6.0.7, 9.5.x prior to 9.5.0.16, 9.4.x prior to 9.4.0.22, 9.3.x prior to 9.3.0.25, 9.2.x prior to 9.2.3.27, and 9.1.x prior to 9.1.5.6 contains a SAML authentication bypass vulnerability which can be leveraged during device enrollment. This vulnerability may allow for a malicious actor to impersonate an authorized SAML session if certificate-based authentication is enabled. This vul ... The VMware Workspace ONE Unified Endpoint Management Console (A/W Console) 9.7.x prior to 9.7.0.3, 9.6.x prior to 9.6.0.7, 9.5.x prior to 9.5.0.16, 9.4.x prior to 9.4.0.22, 9.3.x prior to 9.3.0.25, 9.2.x prior to 9.2.3.27, and 9.1.x prior to 9.1.5.6 contains a SAML authentication bypass vulnerability which can be leveraged during device enrollment. This vulnerability may allow for a malicious actor to impersonate an authorized SAML session if certificate-based authentication is enabled. This vulnerability is also relevant if certificate-based authentication is not enabled, but the outcome of exploitation is limited to an information disclosure (Important Severity) in those cases.

Show More

The VMware AirWatch Agent for Android prior to 8.2 and AirWatch Agent for Windows Mobile prior to 6.5.2 contain a remote code execution vulnerability in real time File Manager capabilities. This vulnerability may allow for unauthorized creation and execution of files in the Agent sandbox and other publicly accessible directories such as those on the SD card by a malicious administrator.

VMware Horizon Client for Linux (4.x before 4.8.0 and prior) contains a local privilege escalation vulnerability due to insecure usage of SUID binary. Successful exploitation of this issue may allow unprivileged users to escalate their privileges to root on a Linux machine where Horizon Client is installed.

VMware Fusion (10.x before 10.1.2) contains a signature bypass vulnerability which may lead to a local privilege escalation.

VMware Workstation (14.x before 14.1.1, 12.x) and Fusion (10.x before 10.1.1 and 8.x) contain a denial-of-service vulnerability which can be triggered by opening a large number of VNC sessions. Note: In order for exploitation to be possible on Workstation and Fusion, VNC must be manually enabled.

LibreOffice before 5.4.5 and 6.x before 6.0.1 allows remote attackers to read arbitrary files via =WEBSERVICE calls in a document, which use the COM.MICROSOFT.WEBSERVICE function.

An issue was discovered on VOBOT CLOCK before 0.99.30 devices. Cleartext HTTP is used to download a breakout program, and therefore man-in-the-middle attackers can execute arbitrary code by watching for a local user to launch the Breakout Easter Egg feature, and then sending a crafted HTTP response.

In the VPN client in Mailbutler Shimo before 4.1.5.1 on macOS, the com.feingeist.shimo.helper tool LaunchDaemon implements an unprotected XPC service that can be abused to execute scripts as root.

In PureVPN 6.0.1 on macOS, HelperTool LaunchDaemon implements an unprotected XPC service that can be abused to execute system commands as root.

NetScaler ADC 10.5, 11.0, 11.1, and 12.0, and NetScaler Gateway 10.5, 11.0, 11.1, and 12.0 allow remote attackers to gain privilege on a target system.

Privilege Escalation vulnerability in Microsoft Windows client in McAfee True Key (TK) 5.1.230.7 and earlier allows local users to execute arbitrary code via specially crafted malware.

Authentication Abuse vulnerability in Microsoft Windows client in McAfee True Key (TK) 5.1.230.7 and earlier allows local users to execute unauthorized commands via specially crafted malware.

Insecure handling of temporary files in non-Windows McAfee Agent 5.0.0 through 5.0.6, 5.5.0, and 5.5.1 allows an Unprivileged User to introduce custom paths during agent installation in Linux via unspecified vectors.

Privilege escalation vulnerability in McAfee Agent (MA) for Linux 5.0.0 through 5.0.6, 5.5.0, and 5.5.1 allows local users to perform arbitrary command execution via specific conditions.

Privilege escalation vulnerability in McAfee Agent (MA) for Linux 5.0.0 through 5.0.6, 5.5.0, and 5.5.1 allows local users to perform arbitrary command execution via specific conditions.

SSH host keys generation vulnerability in the server in McAfee Threat Intelligence Exchange Server (TIE Server) 1.3.0, 2.0.x, 2.1.x, 2.2.0 allows man-in-the-middle attackers to spoof servers via acquiring keys from another environment.

Configuration/Environment manipulation vulnerability in the administrative interface in McAfee Web Gateway (MWG) MWG 7.8.1.x allows authenticated administrator users to execute arbitrary commands via unspecified vectors.

Application Protection Bypass vulnerability in McAfee ePolicy Orchestrator (ePO) 5.3.0 through 5.3.3 and 5.9.0 through 5.9.1 allows remote authenticated users to bypass localhost only access security protection for some ePO features via a specially crafted HTTP request.

A whitelist bypass vulnerability in McAfee Application Control / Change Control 7.0.1 and before allows execution bypass, for example, with simple DLL through interpreters such as PowerShell.

An issue was discovered that affects all producers of BIOS firmware who make a certain realistic interpretation of an obscure portion of the Trusted Computing Group (TCG) Trusted Platform Module (TPM) 2.0 specification. An abnormal case is not handled properly by this firmware while S3 sleep and can clear TPM 2.0. It allows local users to overwrite static PCRs of TPM and neutralize the security features of it, such as seal/unseal and remote attestation.

An issue was discovered on Orbic Wonder Orbic/RC555L/RC555L:7.1.2/N2G47H/329100b:user/release-keys devices. Any app co-located on the device can send an intent to factory reset the device programmatically because of com.android.server.MasterClearReceiver. This does not require any user interaction and does not require any permission to perform. A factory reset will remove all user data from the device. This will result in the loss of any data that the user has not backed up or synced externally. ... An issue was discovered on Orbic Wonder Orbic/RC555L/RC555L:7.1.2/N2G47H/329100b:user/release-keys devices. Any app co-located on the device can send an intent to factory reset the device programmatically because of com.android.server.MasterClearReceiver. This does not require any user interaction and does not require any permission to perform. A factory reset will remove all user data from the device. This will result in the loss of any data that the user has not backed up or synced externally. This capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves), although this capability is present in an unprotected component of the Android OS. This vulnerability is not present in Google's Android Open Source Project (AOSP) code. Therefore, it was introduced by Orbic or another entity in the supply chain.

Show More

The Alcatel A30 device with a build fingerprint of TCL/5046G/MICKEY6US:7.0/NRD90M/J63:user/release-keys contains a hidden privilege escalation capability to achieve command execution as the root user. They have made modifications that allow a user with physical access to the device to obtain a root shell via ADB. Modifying the read-only properties by an app as the system user creates a UNIX domain socket named factory_test that will execute commands as the root user by processes that have privil ... The Alcatel A30 device with a build fingerprint of TCL/5046G/MICKEY6US:7.0/NRD90M/J63:user/release-keys contains a hidden privilege escalation capability to achieve command execution as the root user. They have made modifications that allow a user with physical access to the device to obtain a root shell via ADB. Modifying the read-only properties by an app as the system user creates a UNIX domain socket named factory_test that will execute commands as the root user by processes that have privilege to access it (as per the SELinux rules that the vendor controls).

Show More

CA Spectrum 10.1 prior to 10.01.02.PTF_10.1.239 and 10.2.x prior to 10.2.3 allows remote attackers to cause a denial of service via unspecified vectors.

The pam_fscrypt module in fscrypt before 0.2.4 may incorrectly restore primary and supplementary group IDs to the values associated with the root user, which allows attackers to gain privileges via a successful login through certain applications that use Linux-PAM (aka pam).

The CUPS AppArmor profile incorrectly confined the dnssd backend due to use of hard links. A local attacker could possibly use this issue to escape confinement. This flaw affects versions prior to 2.2.7-1ubuntu2.1 in Ubuntu 18.04 LTS, prior to 2.2.4-7ubuntu3.1 in Ubuntu 17.10, prior to 2.1.3-4ubuntu0.5 in Ubuntu 16.04 LTS, and prior to 1.7.2-0ubuntu1.10 in Ubuntu 14.04 LTS.

Apport does not properly handle crashes originating from a PID namespace allowing local users to create certain files as root which an attacker could leverage to perform a denial of service via resource exhaustion, possibly gain root privileges, or escape from containers. The is_same_ns() function returns True when /proc/<global pid>/ does not exist in order to indicate that the crash should be handled in the global namespace rather than inside of a container. However, the portion of the data/ap ... Apport does not properly handle crashes originating from a PID namespace allowing local users to create certain files as root which an attacker could leverage to perform a denial of service via resource exhaustion, possibly gain root privileges, or escape from containers. The is_same_ns() function returns True when /proc/<global pid>/ does not exist in order to indicate that the crash should be handled in the global namespace rather than inside of a container. However, the portion of the data/apport code that decides whether or not to forward a crash to a container does not always replace sys.argv[1] with the value stored in the host_pid variable when /proc/<global pid>/ does not exist which results in the container pid being used in the global namespace. This flaw affects versions 2.20.8-0ubuntu4 through 2.20.9-0ubuntu7, 2.20.7-0ubuntu3.7, 2.20.7-0ubuntu3.8, 2.20.1-0ubuntu2.15 through 2.20.1-0ubuntu2.17, and 2.14.1-0ubuntu3.28.

Show More

An issue was discovered in Icinga 2.x through 2.8.1. The lack of a constant-time password comparison function can disclose the password to an attacker.