Vulnerabilities (CVE)

A CWE-284 Improper Access Control vulnerability exists in SCADAPack 7x Remote Connect (V3.6.3.574 and prior) which allows an attacker to place executables in a specific folder and run code whenever RemoteConnect is executed by the user.

**VERSION NOT SUPPORTED WHEN ASSIGNED** A legacy debug port account in TCMs installed in Tricon system versions 10.2.0 through 10.5.3 is visible on the network and could allow inappropriate access. This vulnerability was remediated in TCM version 10.5.4.

**VERSION NOT SUPPORTED WHEN ASSIGNED** A legacy support account in the TriStation software version v4.9.0 and earlier could cause improper access to the TriStation host machine. This was addressed in TriStation version v4.9.1 and v4.10.1 released on May 30, 2013.1

**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability with the former 'password' feature could allow a denial of service attack if the user is not following documented guidelines pertaining to dedicated TriStation connection and key-switch protection. This vulnerability was discovered and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. This feature is not present in version v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions.

Sage X3 Installation Pathname Disclosure. A specially crafted packet can elicit a response from the AdxDSrv.exe component that reveals the installation directory of the product. Note that this vulnerability can be combined with CVE-2020-7388 to achieve full RCE. This issue was fixed in AdxAdmin 93.2.53, which ships with updates for on-premises versions of Sage X3 Version 9 (components shipped with Syracuse 9.22.7.2 and later), Sage X3 HR & Payroll Version 9 (those components that ship with Syrac ... Sage X3 Installation Pathname Disclosure. A specially crafted packet can elicit a response from the AdxDSrv.exe component that reveals the installation directory of the product. Note that this vulnerability can be combined with CVE-2020-7388 to achieve full RCE. This issue was fixed in AdxAdmin 93.2.53, which ships with updates for on-premises versions of Sage X3 Version 9 (components shipped with Syracuse 9.22.7.2 and later), Sage X3 HR & Payroll Version 9 (those components that ship with Syracuse 9.24.1.3), Version 11 (components shipped with Syracuse 11.25.2.6 and later), and Version 12 (components shipped with Syracuse 12.10.2.8 and later) of Sage X3. Other on-premises versions of Sage X3 are unsupported by the vendor.

Show More

User Interface (UI) Misrepresentation of Critical Information vulnerability in the address bar of UCWeb's UC Browser allows an attacker to obfuscate the true source of data as presented in the browser. This issue affects UCWeb's UC Browser version 13.0.8 and prior versions.

Protection Mechanism Failure vulnerability in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 September 2020 Update allows local administrator to temporarily reduce the detection capability allowing otherwise detected malware to run via stopping certain Microsoft services.

Unexpected behavior violation in McAfee Total Protection (MTP) prior to 16.0.R26 allows local users to turn off real time scanning via a specially crafted object making a specific function call.

Exposure of Sensitive Information in the web interface in McAfee Advanced Threat Defense (ATD) prior to 4.12.2 allows remote authenticated users to view sensitive unencrypted information via a carefully crafted HTTP request parameter. The risk is partially mitigated if your ATD instances are deployed as recommended with no direct access from the Internet to them.

Exposure of Sensitive Information in the web interface in McAfee Advanced Threat Defense (ATD) prior to 4.12.2 allows remote authenticated users to view sensitive unencrypted information via a carefully crafted HTTP request parameter. The risk is partially mitigated if your ATD instances are deployed as recommended with no direct access from the Internet to them.

Evoko Home devices 1.31 through 1.37 allow remote attackers to obtain sensitive information (such as usernames and password hashes) via a WebSocket request, as demonstrated by the sockjs/224/uf1psgff/websocket URI at a wss:// URL.

Westermo MRD-315 1.7.3 and 1.7.4 devices have an information disclosure vulnerability that allows an authenticated remote attacker to retrieve the source code of different functions of the web application via requests that lack certain mandatory parameters. This affects ifaces-diag.asp, system.asp, backup.asp, sys-power.asp, ifaces-wls.asp, ifaces-wls-pkt.asp, and ifaces-wls-pkt-adv.asp.

The Aviatrix OpenVPN client through 2.5.7 on Linux, macOS, and Windows is vulnerable when OpenSSL parameters are altered from the issued value set; the parameters could allow unauthorized third-party libraries to load.

LinuxKI v6.0-1 and earlier is vulnerable to an remote code execution which is resolved in release 6.0-2.

A local elevation of privilege using physical access security vulnerability was found in HPE Proliant Gen10 Servers using Intel Innovation Engine (IE). This attack requires a physical attack to the server motherboard. To mitigate this issue, ensure your server is always physically secured. HPE will not address this issue in the impacted Gen 10 servers listed. HPE recommends using appropriate physical security methods as a compensating control to disallow an attacker from having physical access t ... A local elevation of privilege using physical access security vulnerability was found in HPE Proliant Gen10 Servers using Intel Innovation Engine (IE). This attack requires a physical attack to the server motherboard. To mitigate this issue, ensure your server is always physically secured. HPE will not address this issue in the impacted Gen 10 servers listed. HPE recommends using appropriate physical security methods as a compensating control to disallow an attacker from having physical access to the server main circuit board.

Show More

A potential security vulnerability has been identified in HPE Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting ToolKit. The vulnerability could be locally exploited to allow arbitrary code execution during the boot process. **Note:** This vulnerability is related to using insmod in GRUB2 in the specific impacted HPE product and HPE is addressing this issue. HPE has made the following software updates and mitigation information to resolve the vulnerability in Intelligent Pro ... A potential security vulnerability has been identified in HPE Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting ToolKit. The vulnerability could be locally exploited to allow arbitrary code execution during the boot process. **Note:** This vulnerability is related to using insmod in GRUB2 in the specific impacted HPE product and HPE is addressing this issue. HPE has made the following software updates and mitigation information to resolve the vulnerability in Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting ToolKit. HPE provided latest Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting Toolkit which includes the GRUB2 patch to resolve this vulnerability. These new boot images will update GRUB2 and the Forbidden Signature Database (DBX). After the DBX is updated, users will not be able to boot to the older IP, SPP or Scripting ToolKit with Secure Boot enabled. HPE have provided a standalone DBX update tool to work with Microsoft Windows, and supported Linux Operating Systems. These tools can be used to update the Forbidden Signature Database (DBX) from within the OS. **Note:** This DBX update mitigates the GRUB2 issue with insmod enabled, and the "Boot Hole" issue for HPE signed GRUB2 applications.

Show More

A potential security vulnerability has been identified in HPE iLO Amplifier Pack server version 1.70. The vulnerability could be exploited to allow remote code execution.

A potential security vulnerability has been identified in HPE Integrated Lights-Out 5 (iLO 5) and Integrated Lights-Out 4 (iLO 4) firmware. The vulnerability could be remotely exploited to disclose the serial number and other information.

A potential security vulnerability has been identified in HPE Systems Insight Manager (SIM) version 7.6. The vulnerability could be exploited to allow remote code execution.

There is a remote escalation of privilege possible for a malicious user that has a OneView account in OneView and Synergy Composer. HPE has provided updates to Oneview and Synergy Composer: Update to version 5.5 of OneView, Composer, or Composer2.

Potential remote access security vulnerabilities have been identified with HPE Nimble Storage systems that could be exploited by an attacker to access and modify sensitive information on the system. The following NimbleOS versions, and all subsequent releases, contain a software fix for this vulnerability: 3.9.3.0 4.5.6.0 5.0.9.0 5.1.4.100

Potential remote code execution security vulnerabilities have been identified with HPE Nimble Storage systems that could be exploited by an attacker to gain elevated privileges on the array. The following NimbleOS versions, and all subsequent releases, contain a software fix for this vulnerability: 3.9.3.0 4.5.6.0 5.0.9.0 5.1.4.100

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access. Hewlett Packard Enterprise has provided a software update to resolve this vulnerability in HPE Smart Update Manager (SUM) prior to 8.5.6. Please visit the HPE Support Center at https://support.hpe.com/hpesc/public/home to download the latest version of HPE Smart Update Manager (SUM). Download the latest version of HPE Smart Update Manager (SUM) or download the latest Service ... A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access. Hewlett Packard Enterprise has provided a software update to resolve this vulnerability in HPE Smart Update Manager (SUM) prior to 8.5.6. Please visit the HPE Support Center at https://support.hpe.com/hpesc/public/home to download the latest version of HPE Smart Update Manager (SUM). Download the latest version of HPE Smart Update Manager (SUM) or download the latest Service Pack For ProLiant (SPP).

Show More

A potential security vulnerability has been identified in the disk drive firmware installers named Supplemental Update / Online ROM Flash Component on HPE servers running Linux. The vulnerable software is included in the HPE Service Pack for ProLiant (SPP) releases 2018.06.0, 2018.09.0, and 2018.11.0. The vulnerable software is the Supplemental Update / Online ROM Flash Component for Linux (x64) software. The installer in this software component could be locally exploited to execute arbitrary co ... A potential security vulnerability has been identified in the disk drive firmware installers named Supplemental Update / Online ROM Flash Component on HPE servers running Linux. The vulnerable software is included in the HPE Service Pack for ProLiant (SPP) releases 2018.06.0, 2018.09.0, and 2018.11.0. The vulnerable software is the Supplemental Update / Online ROM Flash Component for Linux (x64) software. The installer in this software component could be locally exploited to execute arbitrary code. Drive Models can be found in the Vulnerability Resolution field of the security bulletin. The 2019_03 SPP and Supplemental update / Online ROM Flash Component for Linux (x64) after 2019.03.0 has fixed this issue.

Show More

A remote access to sensitive data vulnerability was discovered in HPE IOT + GCP version(s): 1.4.0, 1.4.1, 1.4.2, 1.2.4.2.

A unauthorized remote access vulnerability was discovered in HPE IOT + GCP version(s): 1.4.0, 1.4.1, 1.4.2, 1.2.4.2.

A remote execution of arbitrary commands vulnerability was discovered in Aruba Airwave Software version(s): Prior to 1.3.2.

A remote unauthenticated arbitrary code execution vulnerability was discovered in Aruba Airwave Software version(s): Prior to 1.3.2.

A remote unauthorized access vulnerability was discovered in Aruba Airwave Software version(s): Prior to 1.3.2.

A local escalation of privilege vulnerability was discovered in Aruba ClearPass Policy Manager version(s) prior to 6.9.5, 6.8.9, 6.7.14-HF1. Aruba has released patches for Aruba ClearPass Policy Manager that address this security vulnerability.

A vulnerability exists in the Aruba Analytics and Location Engine (ALE) web management interface 2.1.0.2 and earlier firmware that allows an already authenticated administrative user to arbitrarily modify files as an underlying privileged operating system user.

The ClearPass Policy Manager WebUI administrative interface has an authenticated command remote execution. When the attacker is already authenticated to the administrative interface, they could then exploit the system, leading to remote command execution in the underlying operating system. Resolution: Fixed in 6.7.13-HF, 6.8.5-HF, 6.8.6, 6.9.1 and higher.

The ClearPass Policy Manager WebUI administrative interface has an authenticated command remote execution. When the attacker is already authenticated to the administrative interface, they could then exploit the system, leading to remote command execution in the underlying operating system. Resolution: Fixed in 6.7.13-HF, 6.8.5-HF, 6.8.6, 6.9.1 and higher.

A vulnerability was found when an attacker, while communicating with the ClearPass management interface, is able to intercept and change parameters in the HTTP packets resulting in the compromise of some of ClearPass' service accounts. Resolution: Fixed in 6.7.10, 6.8.1, 6.9.0 and higher.

The Elementor Page Builder plugin before 2.8.4 for WordPress does not sanitize data during creation of a new template.

Tableau Server installations configured with Site-Specific SAML that allows the APIs to be used by unauthenticated users. If exploited, this could allow a malicious user to configure Site-Specific SAML settings and could lead to account takeover for users of that site. Tableau Server versions affected on both Windows and Linux are: 2018.2 through 2018.2.27, 2018.3 through 2018.3.24, 2019.1 through 2019.1.22, 2019.2 through 2019.2.18, 2019.3 through 2019.3.14, 2019.4 through 2019.4.13, 2020.1 thr ... Tableau Server installations configured with Site-Specific SAML that allows the APIs to be used by unauthenticated users. If exploited, this could allow a malicious user to configure Site-Specific SAML settings and could lead to account takeover for users of that site. Tableau Server versions affected on both Windows and Linux are: 2018.2 through 2018.2.27, 2018.3 through 2018.3.24, 2019.1 through 2019.1.22, 2019.2 through 2019.2.18, 2019.3 through 2019.3.14, 2019.4 through 2019.4.13, 2020.1 through 2020.1.10, 2020.2 through 2020.2.7, and 2020.3 through 2020.3.2.

Show More

A Denial of Service vulnerability in MuleSoft Mule CE/EE 3.8.x, 3.9.x, and 4.x released before April 7, 2020, could allow remote attackers to submit data which can lead to resource exhaustion.

HP Print and Scan Doctor may potentially be vulnerable to local elevation of privilege.

Potential security vulnerabilities including compromise of integrity, and allowed communication with untrusted clients has been identified in HP Support Assistant software.

Potential security vulnerabilities including compromise of integrity, and allowed communication with untrusted clients has been identified in HP Support Assistant software.