Vulnerabilities (CVE)

An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, Exynos 990, Exynos 1080, Exynos 2100, Exynos 2200, Exynos 1280, Exynos 1380, Exynos 1330, Exynos 2400, Exynos Modem 5123, Exynos Modem 5300. The baseband software does not properly check states specified by the RRC (Radio Resource Control) module. This can lead to disclosure of sensitive information.

HAProxy 2.9.x before 2.9.10, 3.0.x before 3.0.4, and 3.1.x through 3.1-dev6 allows a remote denial of service for HTTP/2 zero-copy forwarding (h2_send loop) under a certain set of conditions, as exploited in the wild in 2024.

Padding Oracle vulnerability in Apache Druid extension, druid-pac4j. This could allow an attacker to manipulate a pac4j session cookie. This issue affects Apache Druid versions 0.18.0 through 30.0.0. Since the druid-pac4j extension is optional and disabled by default, Druid installations not using the druid-pac4j extension are not affected by this vulnerability. While we are not aware of a way to meaningfully exploit this flaw, we nevertheless recommend upgrading to version 30.0.1 or higher w ... Padding Oracle vulnerability in Apache Druid extension, druid-pac4j. This could allow an attacker to manipulate a pac4j session cookie. This issue affects Apache Druid versions 0.18.0 through 30.0.0. Since the druid-pac4j extension is optional and disabled by default, Druid installations not using the druid-pac4j extension are not affected by this vulnerability. While we are not aware of a way to meaningfully exploit this flaw, we nevertheless recommend upgrading to version 30.0.1 or higher which fixes the issue and ensuring you have a strong druid.auth.pac4j.cookiePassphrase as a precaution.

Show More

Inappropriate implementation in Google Updator prior to 1.3.36.351 in Google Chrome allowed a local attacker to perform privilege escalation via a malicious file. (Chromium security severity: High)

PureVPN Linux client 2.0.2-Productions fails to properly handle DNS queries, allowing them to bypass the VPN tunnel and be sent directly to the ISP or default DNS servers.

Inappropriate Implementation in DevTools in Google Chrome prior to 126.0.6478.54 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: High)

An issue was discovered in OpenDaylight Authentication, Authorization and Accounting (AAA) through 0.19.3. A rogue controller can join a cluster to impersonate an offline peer, even if this rogue controller does not possess the complete cluster configuration information.

In OpenDaylight Model-Driven Service Abstraction Layer (MD-SAL) through 13.0.1, a controller with a follower role can configure flow entries in an OpenDaylight clustering deployment.

In setMimeGroup of PackageManagerService.java, there is a possible way to hide the service from Settings due to a logic error in the code. This could lead to local escalation of privilege with User execution privileges needed. User interaction is needed for exploitation.

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are 8.0.35 and prior and 8.2.0 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability ... Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are 8.0.35 and prior and 8.2.0 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

Show More

Inappropriate implementation in Google Updator prior to 1.3.36.351 in Google Chrome allowed a local attacker to bypass discretionary access control via a malicious file. (Chromium security severity: High)

In AFL++ 4.05c, the CmpLog component uses the current working directory to resolve and execute unprefixed fuzzing targets, allowing code execution.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix inode leak on getattr error in __fh_to_dentry

In the Linux kernel, the following vulnerability has been resolved: reiserfs: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change reiserfs rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix setting of fpc register kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (fpc) register of a guest cpu. The new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the host process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or v ... In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix setting of fpc register kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (fpc) register of a guest cpu. The new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the host process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space / host process fpc register value, however it will be discarded, when returning to user space. In result the host process will incorrectly continue to run with the value that was supposed to be used for a guest cpu. Fix this by simply removing the test. There is another test right before the SIE context is entered which will handles invalid values. This results in a change of behaviour: invalid values will now be accepted instead of that the ioctl fails with -EINVAL. This seems to be acceptable, given that this interface is most likely not used anymore, and this is in addition the same behaviour implemented with the memory mapped interface (replace invalid values with zero) - see sync_regs() in kvm-s390.c.

Show More

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host lock every time for deciding if error handler kthread needs to be waken up. This can be too heavy in case of recovery, such as: - N hardware queues - queue depth is M for each hardware queue - each scsi_host_busy() iterates over (N * M) tag/requests If recovery is triggered ... In the Linux kernel, the following vulnerability has been resolved: scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host lock every time for deciding if error handler kthread needs to be waken up. This can be too heavy in case of recovery, such as: - N hardware queues - queue depth is M for each hardware queue - each scsi_host_busy() iterates over (N * M) tag/requests If recovery is triggered in case that all requests are in-flight, each scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called for the last in-flight request, scsi_host_busy() has been run for (N * M - 1) times, and request has been iterated for (N*M - 1) * (N * M) times. If both N and M are big enough, hard lockup can be triggered on acquiring host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169). Fix the issue by calling scsi_host_busy() outside the host lock. We don't need the host lock for getting busy count because host the lock never covers that. [mkp: Drop unnecessary 'busy' variables pointed out by Bart]

Show More

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does ex ... In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to nested_vmx_vmexit() to make sure MSR permission bitmap is not switched when an immediate exit from L2 to L1 happens right after migration (caused by a pending event, for example). Unfortunately, in the exact same situation we still need to have eVMCS mapped so nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS. As a band-aid, restore nested_get_evmcs_page() when clearing KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far from being ideal as we can't easily propagate possible failures and even if we could, this is most likely already too late to do so. The whole 'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration seems to be fragile as we diverge too much from the 'native' path when vmptr loading happens on vmx_set_nested_state().

Show More

In the Linux kernel, the following vulnerability has been resolved: riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe The execution of sys_read end up hitting a BUG_ON() in __find_get_block after installing kprobe at sys_read, the BUG message like the following: [ 65.708663] ------------[ cut here ]------------ [ 65.709987] kernel BUG at fs/buffer.c:1251! [ 65.711283] Kernel BUG [#1] [ 65.712032] Modules linked in: [ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainte ... In the Linux kernel, the following vulnerability has been resolved: riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe The execution of sys_read end up hitting a BUG_ON() in __find_get_block after installing kprobe at sys_read, the BUG message like the following: [ 65.708663] ------------[ cut here ]------------ [ 65.709987] kernel BUG at fs/buffer.c:1251! [ 65.711283] Kernel BUG [#1] [ 65.712032] Modules linked in: [ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1 [ 65.714407] Hardware name: riscv-virtio,qemu (DT) [ 65.715696] epc : __find_get_block+0x218/0x2c8 [ 65.716835] ra : __getblk_gfp+0x1c/0x4a [ 65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930 [ 65.719553] gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038 [ 65.721290] t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960 [ 65.723051] s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a [ 65.724772] a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040 [ 65.726545] a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000 [ 65.728308] s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008 [ 65.730049] s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8 [ 65.731802] s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008 [ 65.733516] s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f [ 65.734434] t5 : 00000000000003ff t6 : 0000000000040000 [ 65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 65.734901] Call Trace: [ 65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8 [ 65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6 [ 65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a [ 65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c [ 65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e [ 65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66 [ 65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da [ 65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150 [ 65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246 [ 65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114 [ 65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea [ 65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a [ 65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2 [ 65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8 [ 65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16 [ 65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2 [ 65.738858] ---[ end trace fe93f985456c935d ]--- A simple reproducer looks like: echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable cat /sys/kernel/debug/tracing/trace Here's what happens to hit that BUG_ON(): 1) After installing kprobe at entry of sys_read, the first instruction is replaced by 'ebreak' instruction on riscv64 platform. 2) Once kernel reach the 'ebreak' instruction at the entry of sys_read, it trap into the riscv breakpoint handler, where it do something to setup for coming single-step of origin instruction, including backup the 'sstatus' in pt_regs, followed by disable interrupt during single stepping via clear 'SIE' bit of 'sstatus' in pt_regs. 3) Then kernel restore to the instruction slot contains two instructions, one is original instruction at entry of sys_read, the other is 'ebreak'. Here it trigger a 'Instruction page fault' exception (value at 'scause' is '0xc'), if PF is not filled into PageTabe for that slot yet. 4) Again kernel trap into page fault exception handler, where it choose different policy according to the state of running kprobe. Because afte 2) the state is KPROBE_HIT_SS, so kernel reset the current kp ---truncated---

Show More

A partial fix for  CVE-2024-39884 in the core of Apache HTTP Server 2.4.61 ignores some use of the legacy content-type based configuration of handlers. "AddType" and similar configuration, under some circumstances where files are requested indirectly, result in source code disclosure of local content. For example, PHP scripts may be served instead of interpreted. Users are recommended to upgrade to version 2.4.62, which fixes this issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Pinot. This issue affects Apache Pinot: from 0.1 before 1.0.0. Users are recommended to upgrade to version 1.0.0 and configure RBAC, which fixes the issue. Details:  When using a request to path “/appconfigs” to the controller, it can lead to the disclosure of sensitive information such as system information (e.g. arch, os version), environment information (e.g. maxHeapSize) and Pinot configurations (e.g. zook ... Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Pinot. This issue affects Apache Pinot: from 0.1 before 1.0.0. Users are recommended to upgrade to version 1.0.0 and configure RBAC, which fixes the issue. Details:  When using a request to path “/appconfigs” to the controller, it can lead to the disclosure of sensitive information such as system information (e.g. arch, os version), environment information (e.g. maxHeapSize) and Pinot configurations (e.g. zookeeper path). This issue was addressed by the Role-based Access Control https://docs.pinot.apache.org/operators/tutorials/authentication/basic-auth-access-control , so that /appConfigs` and all other APIs can be access controlled. Only authorized users have access to it. Note the user needs to add the admin role accordingly to the RBAC guide to control access to this endpoint, and in the future version of Pinot, a default admin role is planned to be added.

Show More

In multiple files, there is a possible way to capture the device screen when disallowed by device policy due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In convertToComponentName of DreamService.java, there is a possible way to launch arbitrary protected activities due to intent redirection. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.

Improper Access Control in the AMD SPI protection feature may allow a user with Ring0 (kernel mode) privileged access to bypass protections potentially resulting in loss of integrity and availability.

An issue was discovered in Mbed TLS before 2.28.9 and 3.x before 3.6.1, in which the user-selected algorithm is not used. Unlike previously documented, enabling MBEDTLS_PSA_HMAC_DRBG_MD_TYPE does not cause the PSA subsystem to use HMAC_DRBG: it uses HMAC_DRBG only when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_CTR_DRBG_C are disabled.

Broken Access Control vulnerability in Samuel Marshall JCH Optimize.This issue affects JCH Optimize: from n/a through 4.0.0.

Insufficient policy enforcement in Download in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to bypass filesystem restrictions via a crafted HTML page. (Chromium security severity: Medium)

The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 throu ... The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.

Show More

A website configured to initiate a specially crafted WebTransport session could crash the Firefox process leading to a denial of service condition. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

The issue was addressed with improved checks. This issue is fixed in macOS Ventura 13.7.2, tvOS 18.2, watchOS 11.2, iOS 18.2 and iPadOS 18.2, iPadOS 17.7.3, macOS Sonoma 14.7.2, macOS Sequoia 15.2. An app may be able to break out of its sandbox.

If an attempt is made to create an item of a type prohibited by `ACL#hasCreatePermission2` or `TopLevelItemDescriptor#isApplicableIn(ItemGroup)` through the Jenkins CLI or the REST API and either of these checks fail, Jenkins 2.478 and earlier, LTS 2.462.2 and earlier creates the item in memory, only deleting it from disk, allowing attackers with Item/Configure permission to save the item to persist it, effectively bypassing the item creation restriction.

Serilog before v2.1.0 was discovered to contain a Client IP Spoofing vulnerability, which allows attackers to falsify their IP addresses by specifying an arbitrary IP as a value of X-Forwarded-For or Client-Ip headers while performing HTTP requests.

In Apache CloudStack 4.19.1.0, a regression in the network listing API allows unauthorised list access of network details for domain admin and normal user accounts. This vulnerability compromises tenant isolation, potentially leading to unauthorised access to network details, configurations and data. Affected users are advised to upgrade to version 4.19.1.1 to address this issue. Users on older versions of CloudStack considering to upgrade, can skip 4.19.1.0 and upgrade directly to 4.19.1.1.

The issue was addressed by suspending Persona when the virtual keyboard is active. This issue is fixed in visionOS 1.3. Inputs to the virtual keyboard may be inferred from Persona.

Mommy Heather Advanced Backups up to v3.5.3 allows attackers to write arbitrary files via restoring a crafted back up.

The libcurl CURLOPT_SSL_VERIFYPEER option was disabled on a subset of requests made by Nest production devices which enabled a potential man-in-the-middle attack on requests to Google cloud services by any host the traffic was routed through.

This issue was addressed with improved environment sanitization. This issue is fixed in macOS Ventura 13.6.7, macOS Monterey 12.7.5, iOS 16.7.8 and iPadOS 16.7.8, tvOS 17.5, iOS 17.5 and iPadOS 17.5, watchOS 10.5, macOS Sonoma 14.5. An app may be able to access sensitive user data.

Denial of Service (DoS) vulnerability in Jungo WinDriver before 12.7.0 allows local attackers to cause a Windows blue screen error.

This High severity File Inclusion vulnerability was introduced in versions 9.0.0, 9.1.0, 9.2.0, 9.3.0, 9.4.0, 9.5.0 and 9.6.0 of Bamboo Data Center and Server. This File Inclusion vulnerability, with a CVSS Score of 8.1, allows an authenticated attacker to get the application to display the contents of a local file, or execute a different files already stored locally on the server which has high impact to confidentiality, high impact to integrity, no impact to availability, and requires no user ... This High severity File Inclusion vulnerability was introduced in versions 9.0.0, 9.1.0, 9.2.0, 9.3.0, 9.4.0, 9.5.0 and 9.6.0 of Bamboo Data Center and Server. This File Inclusion vulnerability, with a CVSS Score of 8.1, allows an authenticated attacker to get the application to display the contents of a local file, or execute a different files already stored locally on the server which has high impact to confidentiality, high impact to integrity, no impact to availability, and requires no user interaction. Atlassian recommends that Bamboo Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions listed on this CVE See the release notes (https://confluence.atlassian.com/bambooreleases/bamboo-release-notes-1189793869.html). You can download the latest version of Bamboo Data Center and Server from the download center (https://www.atlassian.com/software/bamboo/download-archives). This vulnerability was reported via our Bug Bounty program.

Show More

Inappropriate implementation in FedCM in Google Chrome prior to 127.0.6533.72 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium)

Apache Druid allows users with certain permissions to read data from other database systems using JDBC. This functionality allows trusted users to set up Druid lookups or run ingestion tasks. Druid also allows administrators to configure a list of allowed properties that users are able to provide for their JDBC connections. By default, this allowed properties list restricts users to TLS-related properties only. However, when configuration a MySQL JDBC connection, users can use a particularly-cra ... Apache Druid allows users with certain permissions to read data from other database systems using JDBC. This functionality allows trusted users to set up Druid lookups or run ingestion tasks. Druid also allows administrators to configure a list of allowed properties that users are able to provide for their JDBC connections. By default, this allowed properties list restricts users to TLS-related properties only. However, when configuration a MySQL JDBC connection, users can use a particularly-crafted JDBC connection string to provide properties that are not on this allow list. Users without the permission to configure JDBC connections are not able to exploit this vulnerability. CVE-2021-26919 describes a similar vulnerability which was partially addressed in Apache Druid 0.20.2. This issue is fixed in Apache Druid 30.0.1.

Show More