Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix device management cmd timeout flow In the UFS error handling flow, the host will send a device management cmd (NOP OUT) to the device for link recovery. If this cmd times out and clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and return. hba->dev_cmd.complete struct is not set to NULL. When this happens, if cmd has been completed by device, then we will call complete() in __ufshcd_ ... In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix device management cmd timeout flow In the UFS error handling flow, the host will send a device management cmd (NOP OUT) to the device for link recovery. If this cmd times out and clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and return. hba->dev_cmd.complete struct is not set to NULL. When this happens, if cmd has been completed by device, then we will call complete() in __ufshcd_transfer_req_compl(). Because the complete struct is allocated on the stack, the following crash will occur: ipanic_die+0x24/0x38 [mrdump] die+0x344/0x748 arm64_notify_die+0x44/0x104 do_debug_exception+0x104/0x1e0 el1_dbg+0x38/0x54 el1_sync_handler+0x40/0x88 el1_sync+0x8c/0x140 queued_spin_lock_slowpath+0x2e4/0x3c0 __ufshcd_transfer_req_compl+0x3b0/0x1164 ufshcd_trc_handler+0x15c/0x308 ufshcd_host_reset_and_restore+0x54/0x260 ufshcd_reset_and_restore+0x28c/0x57c ufshcd_err_handler+0xeb8/0x1b6c process_one_work+0x288/0x964 worker_thread+0x4bc/0xc7c kthread+0x15c/0x264 ret_from_fork+0x10/0x30

Show More

In the Linux kernel, the following vulnerability has been resolved: irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4 The T241 platform suffers from the T241-FABRIC-4 erratum which causes unexpected behavior in the GIC when multiple transactions are received simultaneously from different sources. This hardware issue impacts NVIDIA server platforms that use more than two T241 chips interconnected. Each chip has support for 320 {E}SPIs. This issue occurs when multiple packets from diff ... In the Linux kernel, the following vulnerability has been resolved: irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4 The T241 platform suffers from the T241-FABRIC-4 erratum which causes unexpected behavior in the GIC when multiple transactions are received simultaneously from different sources. This hardware issue impacts NVIDIA server platforms that use more than two T241 chips interconnected. Each chip has support for 320 {E}SPIs. This issue occurs when multiple packets from different GICs are incorrectly interleaved at the target chip. The erratum text below specifies exactly what can cause multiple transfer packets susceptible to interleaving and GIC state corruption. GIC state corruption can lead to a range of problems, including kernel panics, and unexpected behavior. >From the erratum text: "In some cases, inter-socket AXI4 Stream packets with multiple transfers, may be interleaved by the fabric when presented to ARM Generic Interrupt Controller. GIC expects all transfers of a packet to be delivered without any interleaving. The following GICv3 commands may result in multiple transfer packets over inter-socket AXI4 Stream interface: - Register reads from GICD_I* and GICD_N* - Register writes to 64-bit GICD registers other than GICD_IROUTERn* - ITS command MOVALL Multiple commands in GICv4+ utilize multiple transfer packets, including VMOVP, VMOVI, VMAPP, and 64-bit register accesses." This issue impacts system configurations with more than 2 sockets, that require multi-transfer packets to be sent over inter-socket AXI4 Stream interface between GIC instances on different sockets. GICv4 cannot be supported. GICv3 SW model can only be supported with the workaround. Single and Dual socket configurations are not impacted by this issue and support GICv3 and GICv4." Writing to the chip alias region of the GICD_In{E} registers except GICD_ICENABLERn has an equivalent effect as writing to the global distributor. The SPI interrupt deactivate path is not impacted by the erratum. To fix this problem, implement a workaround that ensures read accesses to the GICD_In{E} registers are directed to the chip that owns the SPI, and disable GICv4.x features. To simplify code changes, the gic_configure_irq() function uses the same alias region for both read and write operations to GICD_ICFGR.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dpt: Treat the DPT BO as a framebuffer Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: p ... In the Linux kernel, the following vulnerability has been resolved: drm/i915/dpt: Treat the DPT BO as a framebuffer Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... (cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a)

Show More

In the Linux kernel, the following vulnerability has been resolved: net: dcb: choose correct policy to parse DCB_ATTR_BCN The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN], which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB BCN"). Please see the comment in below code static int dcbnl_bcn_setcfg(...) { ... ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. ) // !!! dcbnl_pfc_up_nest for attributes // DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ ... In the Linux kernel, the following vulnerability has been resolved: net: dcb: choose correct policy to parse DCB_ATTR_BCN The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN], which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB BCN"). Please see the comment in below code static int dcbnl_bcn_setcfg(...) { ... ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. ) // !!! dcbnl_pfc_up_nest for attributes // DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs ... for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) { // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs ... value_byte = nla_get_u8(data[i]); ... } ... for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) { // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs ... value_int = nla_get_u32(data[i]); ... } ... } That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the following access code fetch each nlattr as dcbnl_bcn_attrs attributes. By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find the beginning part of these two policies are "same". static const struct nla_policy dcbnl_pfc_up_nest[...] = { [DCB_PFC_UP_ATTR_0] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_1] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_2] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_3] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_4] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_5] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_6] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_7] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG}, }; static const struct nla_policy dcbnl_bcn_nest[...] = { [DCB_BCN_ATTR_RP_0] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_1] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_2] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_3] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_4] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_5] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_6] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_7] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG}, // from here is somewhat different [DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32}, ... [DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG}, }; Therefore, the current code is buggy and this nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0. Hence use the correct policy dcbnl_bcn_nest to parse the nested tb[DCB_ATTR_BCN] TLV.

Show More

In the Linux kernel, the following vulnerability has been resolved: ip6mr: Fix skb_under_panic in ip6mr_cache_report() skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i ... In the Linux kernel, the following vulnerability has been resolved: ip6mr: Fix skb_under_panic in ip6mr_cache_report() skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.

Show More

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: don't assume child devices are all fsl-mc devices Changes in VFIO caused a pseudo-device to be created as child of fsl-mc devices causing a crash [1] when trying to bind a fsl-mc device to VFIO. Fix this by checking the device type when enumerating fsl-mc child devices. [1] Modules linked in: Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP CPU: 6 PID: 1289 Comm: sh Not tainted 6.2.0-rc5-00047-g7c46948a6e9 ... In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: don't assume child devices are all fsl-mc devices Changes in VFIO caused a pseudo-device to be created as child of fsl-mc devices causing a crash [1] when trying to bind a fsl-mc device to VFIO. Fix this by checking the device type when enumerating fsl-mc child devices. [1] Modules linked in: Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP CPU: 6 PID: 1289 Comm: sh Not tainted 6.2.0-rc5-00047-g7c46948a6e9c #2 Hardware name: NXP Layerscape LX2160ARDB (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mc_send_command+0x24/0x1f0 lr : dprc_get_obj_region+0xfc/0x1c0 sp : ffff80000a88b900 x29: ffff80000a88b900 x28: ffff48a9429e1400 x27: 00000000000002b2 x26: ffff48a9429e1718 x25: 0000000000000000 x24: 0000000000000000 x23: ffffd59331ba3918 x22: ffffd59331ba3000 x21: 0000000000000000 x20: ffff80000a88b9b8 x19: 0000000000000000 x18: 0000000000000001 x17: 7270642f636d2d6c x16: 73662e3030303030 x15: ffffffffffffffff x14: ffffd59330f1d668 x13: ffff48a8727dc389 x12: ffff48a8727dc386 x11: 0000000000000002 x10: 00008ceaf02f35d4 x9 : 0000000000000012 x8 : 0000000000000000 x7 : 0000000000000006 x6 : ffff80000a88bab0 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000a88b9e8 x2 : ffff80000a88b9e8 x1 : 0000000000000000 x0 : ffff48a945142b80 Call trace: mc_send_command+0x24/0x1f0 dprc_get_obj_region+0xfc/0x1c0 fsl_mc_device_add+0x340/0x590 fsl_mc_obj_device_add+0xd0/0xf8 dprc_scan_objects+0x1c4/0x340 dprc_scan_container+0x38/0x60 vfio_fsl_mc_probe+0x9c/0xf8 fsl_mc_driver_probe+0x24/0x70 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 device_driver_attach+0x30/0x68 bind_store+0xa8/0x130 drv_attr_store+0x24/0x38 sysfs_kf_write+0x44/0x60 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x334/0x448 ksys_write+0x68/0xf0 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x108 el0_svc_common.constprop.1+0x94/0xf8 do_el0_svc+0x38/0xb0 el0_svc+0x20/0x50 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x174/0x178 Code: aa0103f4 a9025bf5 d5384100 b9400801 (79401260) ---[ end trace 0000000000000000 ]---

Show More

In the Linux kernel, the following vulnerability has been resolved: LoongArch: mm: Add p?d_leaf() definitions When I do LTP test, LTP test case ksm06 caused panic at break_ksm_pmd_entry -> pmd_leaf (Huge page table but False) -> pte_present (panic) The reason is pmd_leaf() is not defined, So like commit 501b81046701 ("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for LoongArch.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Handle pairing of E-switch via uplink un/load APIs In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [ ... In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Handle pairing of E-switch via uplink un/load APIs In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Show More

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix handling IPv4 routes with nhid Fix handling IPv4 routes referencing a nexthop via its id by replacing calls to fib_info_nh() with fib_info_nhc(). Trying to add an IPv4 route referencing a nextop via nhid: $ ip link set up swp5 $ ip a a 10.0.0.1/24 dev swp5 $ ip nexthop add dev swp5 id 20 via 10.0.0.2 $ ip route add 10.0.1.0/24 nhid 20 triggers warnings when trying to handle the ro ... In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix handling IPv4 routes with nhid Fix handling IPv4 routes referencing a nexthop via its id by replacing calls to fib_info_nh() with fib_info_nhc(). Trying to add an IPv4 route referencing a nextop via nhid: $ ip link set up swp5 $ ip a a 10.0.0.1/24 dev swp5 $ ip nexthop add dev swp5 id 20 via 10.0.0.2 $ ip route add 10.0.1.0/24 nhid 20 triggers warnings when trying to handle the route: [ 528.805763] ------------[ cut here ]------------ [ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1 [ 528.845178] Hardware name: delta,tn48m-dn (DT) [ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera] [ 528.876007] sp : ffff80000b20bc90 [ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48 [ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200 [ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059 [ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020 [ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86 [ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc [ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 528.951058] Call trace: [ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 528.965348] process_one_work+0x208/0x488 [ 528.969387] worker_thread+0x4c/0x430 [ 528.973068] kthread+0x120/0x138 [ 528.976313] ret_from_fork+0x10/0x20 [ 528.979909] ---[ end trace 0000000000000000 ]--- [ 528.984998] ------------[ cut here ]------------ [ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1 [ 529.024368] Hardware name: delta,tn48m-dn (DT) [ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera] [ 529.055452] sp : ffff80000b20bc60 [ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48 [ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0 [ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059 [ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80 [ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not write dirty data after degenerating to read-only According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. H ... In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not write dirty data after degenerating to read-only According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned.

Show More

In the Linux kernel, the following vulnerability has been resolved: iommufd/selftest: Catch overflow of uptr and length syzkaller hits a WARN_ON when trying to have a uptr close to UINTPTR_MAX: WARNING: CPU: 1 PID: 393 at drivers/iommu/iommufd/selftest.c:403 iommufd_test+0xb19/0x16f0 Modules linked in: CPU: 1 PID: 393 Comm: repro Not tainted 6.2.0-c9c3395d5e3d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: ... In the Linux kernel, the following vulnerability has been resolved: iommufd/selftest: Catch overflow of uptr and length syzkaller hits a WARN_ON when trying to have a uptr close to UINTPTR_MAX: WARNING: CPU: 1 PID: 393 at drivers/iommu/iommufd/selftest.c:403 iommufd_test+0xb19/0x16f0 Modules linked in: CPU: 1 PID: 393 Comm: repro Not tainted 6.2.0-c9c3395d5e3d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommufd_test+0xb19/0x16f0 Code: 94 c4 31 ff 44 89 e6 e8 a5 54 17 ff 45 84 e4 0f 85 bb 0b 00 00 41 be fb ff ff ff e8 31 53 17 ff e9 a0 f7 ff ff e8 27 53 17 ff <0f> 0b 41 be 8 RSP: 0018:ffffc90000eabdc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8214c487 RDX: 0000000000000000 RSI: ffff88800f5c8000 RDI: 0000000000000002 RBP: ffffc90000eabe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000cd2b0000 R13: 00000000cd2af000 R14: 0000000000000000 R15: ffffc90000eabe68 FS: 00007f94d76d5740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 0000000006880006 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x1ef/0x310 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Check that the user memory range doesn't overflow.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Don't leak some plane state Apparently no one noticed that mdp5 plane states leak like a sieve ever since we introduced plane_state->commit refcount a few years ago in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Fix it by using the right helpers. Patchwork: https://patchwork.freedesktop.org/patch/551236/

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: drop short frames While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm Currently there is no synchronisation between finalize_pkvm() and kvm_arm_init() initcalls. The finalize_pkvm() proceeds happily even if kvm_arm_init() fails resulting in the following warning on all the CPUs and eventually a HYP panic: | kvm [1]: IPA Size Limit: 48 bits | kvm [1]: Failed to init hyp memory protection | kvm [1]: error initializing Hyp mo ... In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm Currently there is no synchronisation between finalize_pkvm() and kvm_arm_init() initcalls. The finalize_pkvm() proceeds happily even if kvm_arm_init() fails resulting in the following warning on all the CPUs and eventually a HYP panic: | kvm [1]: IPA Size Limit: 48 bits | kvm [1]: Failed to init hyp memory protection | kvm [1]: error initializing Hyp mode: -22 | | <snip> | | WARNING: CPU: 0 PID: 0 at arch/arm64/kvm/pkvm.c:226 _kvm_host_prot_finalize+0x30/0x50 | Modules linked in: | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | pstate: 634020c5 (nZCv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) | pc : _kvm_host_prot_finalize+0x30/0x50 | lr : __flush_smp_call_function_queue+0xd8/0x230 | | Call trace: | _kvm_host_prot_finalize+0x3c/0x50 | on_each_cpu_cond_mask+0x3c/0x6c | pkvm_drop_host_privileges+0x4c/0x78 | finalize_pkvm+0x3c/0x5c | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | Failed to finalize Hyp protection: -22 | dtb=fvp-base-revc.dtb | kvm [95]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:540! | kvm [95]: nVHE call trace: | kvm [95]: [<ffff800081052984>] __kvm_nvhe_hyp_panic+0xac/0xf8 | kvm [95]: [<ffff800081059644>] __kvm_nvhe_handle_host_mem_abort+0x1a0/0x2ac | kvm [95]: [<ffff80008105511c>] __kvm_nvhe_handle_trap+0x4c/0x160 | kvm [95]: [<ffff8000810540fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 | kvm [95]: ---[ end nVHE call trace ]--- | kvm [95]: Hyp Offset: 0xfffe8db00ffa0000 | Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 | CPU: 3 PID: 95 Comm: kworker/u16:2 Tainted: G W 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | Workqueue: rpciod rpc_async_schedule | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x138/0x33c | nvhe_hyp_panic_handler+0x100/0x184 | new_slab+0x23c/0x54c | ___slab_alloc+0x3e4/0x770 | kmem_cache_alloc_node+0x1f0/0x278 | __alloc_skb+0xdc/0x294 | tcp_stream_alloc_skb+0x2c/0xf0 | tcp_sendmsg_locked+0x3d0/0xda4 | tcp_sendmsg+0x38/0x5c | inet_sendmsg+0x44/0x60 | sock_sendmsg+0x1c/0x34 | xprt_sock_sendmsg+0xdc/0x274 | xs_tcp_send_request+0x1ac/0x28c | xprt_transmit+0xcc/0x300 | call_transmit+0x78/0x90 | __rpc_execute+0x114/0x3d8 | rpc_async_schedule+0x28/0x48 | process_one_work+0x1d8/0x314 | worker_thread+0x248/0x474 | kthread+0xfc/0x184 | ret_from_fork+0x10/0x20 | SMP: stopping secondary CPUs | Kernel Offset: 0x57c5cb460000 from 0xffff800080000000 | PHYS_OFFSET: 0x80000000 | CPU features: 0x00000000,1035b7a3,ccfe773f | Memory Limit: none | ---[ end Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 ]--- Fix it by checking for the successfull initialisation of kvm_arm_init() in finalize_pkvm() before proceeding any futher.

Show More

In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in mb_find_extent Syzbot found the following issue: EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support! EXT4-fs (loop0): orphan cleanup on readonly fs ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6. ... In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in mb_find_extent Syzbot found the following issue: EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support! EXT4-fs (loop0): orphan cleanup on readonly fs ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:mb_find_extent+0x8a1/0xe30 fs/ext4/mballoc.c:1869 RSP: 0018:ffffc90003c9e098 EFLAGS: 00010293 RAX: ffffffff82405731 RBX: 0000000000000041 RCX: ffff8880783457c0 RDX: 0000000000000000 RSI: 0000000000000041 RDI: 0000000000000040 RBP: 0000000000000040 R08: ffffffff82405723 R09: ffffed10053c9402 R10: ffffed10053c9402 R11: 1ffff110053c9401 R12: 0000000000000000 R13: ffffc90003c9e538 R14: dffffc0000000000 R15: ffffc90003c9e2cc FS: 0000555556665300(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056312f6796f8 CR3: 0000000022437000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_mb_complex_scan_group+0x353/0x1100 fs/ext4/mballoc.c:2307 ext4_mb_regular_allocator+0x1533/0x3860 fs/ext4/mballoc.c:2735 ext4_mb_new_blocks+0xddf/0x3db0 fs/ext4/mballoc.c:5605 ext4_ext_map_blocks+0x1868/0x6880 fs/ext4/extents.c:4286 ext4_map_blocks+0xa49/0x1cc0 fs/ext4/inode.c:651 ext4_getblk+0x1b9/0x770 fs/ext4/inode.c:864 ext4_bread+0x2a/0x170 fs/ext4/inode.c:920 ext4_quota_write+0x225/0x570 fs/ext4/super.c:7105 write_blk fs/quota/quota_tree.c:64 [inline] get_free_dqblk+0x34a/0x6d0 fs/quota/quota_tree.c:130 do_insert_tree+0x26b/0x1aa0 fs/quota/quota_tree.c:340 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 dq_insert_tree fs/quota/quota_tree.c:401 [inline] qtree_write_dquot+0x3b6/0x530 fs/quota/quota_tree.c:420 v2_write_dquot+0x11b/0x190 fs/quota/quota_v2.c:358 dquot_acquire+0x348/0x670 fs/quota/dquot.c:444 ext4_acquire_dquot+0x2dc/0x400 fs/ext4/super.c:6740 dqget+0x999/0xdc0 fs/quota/dquot.c:914 __dquot_initialize+0x3d0/0xcf0 fs/quota/dquot.c:1492 ext4_process_orphan+0x57/0x2d0 fs/ext4/orphan.c:329 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Add some debug information: mb_find_extent: mb_find_extent block=41, order=0 needed=64 next=0 ex=0/41/1@3735929054 64 64 7 block_bitmap: ff 3f 0c 00 fc 01 00 00 d2 3d 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Acctually, blocks per group is 64, but block bitmap indicate at least has 128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's bitmap if set. To resolve above issue, add check like fsck "Padding at end of block bitmap is not set".

Show More

In the Linux kernel, the following vulnerability has been resolved: fbdev/ep93xx-fb: Do not assign to struct fb_info.dev Do not assing the Linux device to struct fb_info.dev. The call to register_framebuffer() initializes the field to the fbdev device. Drivers should not override its value. Fixes a bug where the driver incorrectly decreases the hardware device's reference counter and leaks the fbdev device. v2: * add Fixes tag (Dan)

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix wrong setting of max_corr_read_errors There is no input check when echo md/max_read_errors and overflow might occur. Add check of input number.

In the Linux kernel, the following vulnerability has been resolved: fsdax: force clear dirty mark if CoW XFS allows CoW on non-shared extents to combat fragmentation[1]. The old non-shared extent could be mwrited before, its dax entry is marked dirty. This results in a WARNing: [ 28.512349] ------------[ cut here ]------------ [ 28.512622] WARNING: CPU: 2 PID: 5255 at fs/dax.c:390 dax_insert_entry+0x342/0x390 [ 28.513050] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd ... In the Linux kernel, the following vulnerability has been resolved: fsdax: force clear dirty mark if CoW XFS allows CoW on non-shared extents to combat fragmentation[1]. The old non-shared extent could be mwrited before, its dax entry is marked dirty. This results in a WARNing: [ 28.512349] ------------[ cut here ]------------ [ 28.512622] WARNING: CPU: 2 PID: 5255 at fs/dax.c:390 dax_insert_entry+0x342/0x390 [ 28.513050] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables [ 28.515462] CPU: 2 PID: 5255 Comm: fsstress Kdump: loaded Not tainted 6.3.0-rc1-00001-g85e1481e19c1-dirty #117 [ 28.515902] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.1-1-1 04/01/2014 [ 28.516307] RIP: 0010:dax_insert_entry+0x342/0x390 [ 28.516536] Code: 30 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 45 20 48 83 c0 01 e9 e2 fe ff ff 48 8b 45 20 48 83 c0 01 e9 cd fe ff ff <0f> 0b e9 53 ff ff ff 48 8b 7c 24 08 31 f6 e8 1b 61 a1 00 eb 8c 48 [ 28.517417] RSP: 0000:ffffc9000845fb18 EFLAGS: 00010086 [ 28.517721] RAX: 0000000000000053 RBX: 0000000000000155 RCX: 000000000018824b [ 28.518113] RDX: 0000000000000000 RSI: ffffffff827525a6 RDI: 00000000ffffffff [ 28.518515] RBP: ffffea00062092c0 R08: 0000000000000000 R09: ffffc9000845f9c8 [ 28.518905] R10: 0000000000000003 R11: ffffffff82ddb7e8 R12: 0000000000000155 [ 28.519301] R13: 0000000000000000 R14: 000000000018824b R15: ffff88810cfa76b8 [ 28.519703] FS: 00007f14a0c94740(0000) GS:ffff88817bd00000(0000) knlGS:0000000000000000 [ 28.520148] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.520472] CR2: 00007f14a0c8d000 CR3: 000000010321c004 CR4: 0000000000770ee0 [ 28.520863] PKRU: 55555554 [ 28.521043] Call Trace: [ 28.521219] <TASK> [ 28.521368] dax_fault_iter+0x196/0x390 [ 28.521595] dax_iomap_pte_fault+0x19b/0x3d0 [ 28.521852] __xfs_filemap_fault+0x234/0x2b0 [ 28.522116] __do_fault+0x30/0x130 [ 28.522334] do_fault+0x193/0x340 [ 28.522586] __handle_mm_fault+0x2d3/0x690 [ 28.522975] handle_mm_fault+0xe6/0x2c0 [ 28.523259] do_user_addr_fault+0x1bc/0x6f0 [ 28.523521] exc_page_fault+0x60/0x140 [ 28.523763] asm_exc_page_fault+0x22/0x30 [ 28.524001] RIP: 0033:0x7f14a0b589ca [ 28.524225] Code: c5 fe 7f 07 c5 fe 7f 47 20 c5 fe 7f 47 40 c5 fe 7f 47 60 c5 f8 77 c3 66 0f 1f 84 00 00 00 00 00 40 0f b6 c6 48 89 d1 48 89 fa <f3> aa 48 89 d0 c5 f8 77 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 [ 28.525198] RSP: 002b:00007fff1dea1c98 EFLAGS: 00010202 [ 28.525505] RAX: 000000000000001e RBX: 000000000014a000 RCX: 0000000000006046 [ 28.525895] RDX: 00007f14a0c82000 RSI: 000000000000001e RDI: 00007f14a0c8d000 [ 28.526290] RBP: 000000000000006f R08: 0000000000000004 R09: 000000000014a000 [ 28.526681] R10: 0000000000000008 R11: 0000000000000246 R12: 028f5c28f5c28f5c [ 28.527067] R13: 8f5c28f5c28f5c29 R14: 0000000000011046 R15: 00007f14a0c946c0 [ 28.527449] </TASK> [ 28.527600] ---[ end trace 0000000000000000 ]--- To be able to delete this entry, clear its dirty mark before invalidate_inode_pages2_range(). [1] https://lore.kernel.org/linux-xfs/20230321151339.GA11376@frogsfrogsfrogs/

Show More

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp conn->chan_lock isn't acquired before l2cap_get_chan_by_scid, if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance' is triggered.

In the Linux kernel, the following vulnerability has been resolved: udf: Do not update file length for failed writes to inline files When write to inline file fails (or happens only partly), we still updated length of inline data as if the whole write succeeded. Fix the update of length of inline data to happen only if the write succeeds.

In the Linux kernel, the following vulnerability has been resolved: rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale Running the 'kfree_rcu_test' test case [1] results in a splat [2]. The root cause is the kfree_scale_thread thread(s) continue running after unloading the rcuscale module. This commit fixes that isue by invoking kfree_scale_cleanup() from rcu_scale_cleanup() when removing the rcuscale module. [1] modprobe rcuscale kfree_rcu_test=1 // After some time ... In the Linux kernel, the following vulnerability has been resolved: rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale Running the 'kfree_rcu_test' test case [1] results in a splat [2]. The root cause is the kfree_scale_thread thread(s) continue running after unloading the rcuscale module. This commit fixes that isue by invoking kfree_scale_cleanup() from rcu_scale_cleanup() when removing the rcuscale module. [1] modprobe rcuscale kfree_rcu_test=1 // After some time rmmod rcuscale rmmod torture [2] BUG: unable to handle page fault for address: ffffffffc0601a87 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:0xffffffffc0601a87 Code: Unable to access opcode bytes at 0xffffffffc0601a5d. RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? kvfree_call_rcu+0xf0/0x3a0 ? kthread+0xf3/0x120 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x1f/0x30 </TASK> Modules linked in: rfkill sunrpc ... [last unloaded: torture] CR2: ffffffffc0601a87 ---[ end trace 0000000000000000 ]---

Show More

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Put the cdns set active part outside the spin lock The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning: BUG: sleeping function called from invalid context at driv ... In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Put the cdns set active part outside the spin lock The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40

Show More

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Return the firmware result upon destroying QP/RQ Previously when destroying a QP/RQ, the result of the firmware destruction function was ignored and upper layers weren't informed about the failure. Which in turn could lead to various problems since when upper layer isn't aware of the failure it continues its operation thinking that the related QP/RQ was successfully destroyed while it actually wasn't, which could le ... In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Return the firmware result upon destroying QP/RQ Previously when destroying a QP/RQ, the result of the firmware destruction function was ignored and upper layers weren't informed about the failure. Which in turn could lead to various problems since when upper layer isn't aware of the failure it continues its operation thinking that the related QP/RQ was successfully destroyed while it actually wasn't, which could lead to the below kernel WARN. Currently, we return the correct firmware destruction status to upper layers which in case of the RQ would be mlx5_ib_destroy_wq() which was already capable of handling RQ destruction failure or in case of a QP to destroy_qp_common(), which now would actually warn upon qp destruction failure. WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0f RSP: 0018:ffff8881533e3e78 EFLAGS: 00010287 RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000 RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0 RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009 R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780 R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000 FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_uverbs_close+0x1a/0x90 [ib_uverbs] __fput+0x82/0x230 task_work_run+0x59/0x90 exit_to_user_mode_prepare+0x138/0x140 syscall_exit_to_user_mode+0x1d/0x50 ? __x64_sys_close+0xe/0x40 do_syscall_64+0x4a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8be3ae0abb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44 RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abb RDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005 RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8 R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020 </TASK>

Show More

In the Linux kernel, the following vulnerability has been resolved: ext4: add bounds checking in get_max_inline_xattr_value_size() Normally the extended attributes in the inode body would have been checked when the inode is first opened, but if someone is writing to the block device while the file system is mounted, it's possible for the inode table to get corrupted. Add bounds checking to avoid reading beyond the end of allocated memory if this happens.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_disksize exceeding i_size problem in paritally written case It is possible for i_disksize can exceed i_size, triggering a warning. generic_perform_write copied = iov_iter_copy_from_user_atomic(len) // copied < len ext4_da_write_end | ext4_update_i_disksize | new_i_size = pos + copied; | WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize | generic_write_end | copied = block_write_end(copi ... In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_disksize exceeding i_size problem in paritally written case It is possible for i_disksize can exceed i_size, triggering a warning. generic_perform_write copied = iov_iter_copy_from_user_atomic(len) // copied < len ext4_da_write_end | ext4_update_i_disksize | new_i_size = pos + copied; | WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize | generic_write_end | copied = block_write_end(copied, len) // copied = 0 | if (unlikely(copied < len)) | if (!PageUptodate(page)) | copied = 0; | if (pos + copied > inode->i_size) // return false if (unlikely(copied == 0)) goto again; if (unlikely(iov_iter_fault_in_readable(i, bytes))) { status = -EFAULT; break; } We get i_disksize greater than i_size here, which could trigger WARNING check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio: ext4_dio_write_iter iomap_dio_rw __iomap_dio_rw // return err, length is not aligned to 512 ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319 CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2 RIP: 0010:ext4_file_write_iter+0xbc7 Call Trace: vfs_write+0x3b1 ksys_write+0x77 do_syscall_64+0x39 Fix it by updating 'copied' value before updating i_disksize just like ext4_write_inline_data_end() does. A reproducer can be found in the buganizer link below.

Show More

In the Linux kernel, the following vulnerability has been resolved: block: ublk: make sure that block size is set correctly block size is one very key setting for block layer, and bad block size could panic kernel easily. Make sure that block size is set correctly. Meantime if ublk_validate_params() fails, clear ub->params so that disk is prevented from being added.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_mqs: move of_node_put() to the correct location of_node_put() should have been done directly after mqs_priv->regmap = syscon_node_to_regmap(gpr_np); otherwise it creates a reference leak on the success path. To fix this, of_node_put() is moved to the correct location, and change all the gotos to direct returns.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix scheduling while atomic in decompression path [ 16.945668][ C0] Call trace: [ 16.945678][ C0] dump_backtrace+0x110/0x204 [ 16.945706][ C0] dump_stack_lvl+0x84/0xbc [ 16.945735][ C0] __schedule_bug+0xb8/0x1ac [ 16.945756][ C0] __schedule+0x724/0xbdc [ 16.945778][ C0] schedule+0x154/0x258 [ 16.945793][ C0] bit_wait_io+0x48/0xa4 [ 16.945808][ C0] out_of_line_wait_on_bit+0x1 ... In the Linux kernel, the following vulnerability has been resolved: f2fs: fix scheduling while atomic in decompression path [ 16.945668][ C0] Call trace: [ 16.945678][ C0] dump_backtrace+0x110/0x204 [ 16.945706][ C0] dump_stack_lvl+0x84/0xbc [ 16.945735][ C0] __schedule_bug+0xb8/0x1ac [ 16.945756][ C0] __schedule+0x724/0xbdc [ 16.945778][ C0] schedule+0x154/0x258 [ 16.945793][ C0] bit_wait_io+0x48/0xa4 [ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198 [ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8 [ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4 [ 16.945881][ C0] f2fs_commit_super+0x110/0x28c [ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4 [ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450 [ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc [ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc [ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0 [ 16.945993][ C0] bio_endio+0x25c/0x2c8 [ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c [ 16.946052][ C0] clone_endio+0x134/0x254 [ 16.946069][ C0] bio_endio+0x25c/0x2c8 [ 16.946084][ C0] blk_update_request+0x1d4/0x478 [ 16.946103][ C0] scsi_end_request+0x38/0x4cc [ 16.946129][ C0] scsi_io_completion+0x94/0x184 [ 16.946147][ C0] scsi_finish_command+0xe8/0x154 [ 16.946164][ C0] scsi_complete+0x90/0x1d8 [ 16.946181][ C0] blk_done_softirq+0xa4/0x11c [ 16.946198][ C0] _stext+0x184/0x614 [ 16.946214][ C0] __irq_exit_rcu+0x78/0x144 [ 16.946234][ C0] handle_domain_irq+0xd4/0x154 [ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c [ 16.946281][ C0] call_on_irq_stack+0x40/0x70 [ 16.946298][ C0] do_interrupt_handler+0x48/0xa4 [ 16.946313][ C0] el1_interrupt+0x38/0x68 [ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30 [ 16.946362][ C0] el1h_64_irq+0x78/0x7c [ 16.946377][ C0] finish_task_switch+0xc8/0x3d8 [ 16.946394][ C0] __schedule+0x600/0xbdc [ 16.946408][ C0] preempt_schedule_common+0x34/0x5c [ 16.946423][ C0] preempt_schedule+0x44/0x48 [ 16.946438][ C0] process_one_work+0x30c/0x550 [ 16.946456][ C0] worker_thread+0x414/0x8bc [ 16.946472][ C0] kthread+0x16c/0x1e0 [ 16.946486][ C0] ret_from_fork+0x10/0x20

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: add atomic_check to bridge ops DRM commit_tails() will disable downstream crtc/encoder/bridge if both disable crtc is required and crtc->active is set before pushing a new frame downstream. There is a rare case that user space display manager issue an extra screen update immediately followed by close DRM device while down stream display interface is disabled. This extra screen update will timeout due to the downst ... In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: add atomic_check to bridge ops DRM commit_tails() will disable downstream crtc/encoder/bridge if both disable crtc is required and crtc->active is set before pushing a new frame downstream. There is a rare case that user space display manager issue an extra screen update immediately followed by close DRM device while down stream display interface is disabled. This extra screen update will timeout due to the downstream interface is disabled but will cause crtc->active be set. Hence the followed commit_tails() called by drm_release() will pass the disable downstream crtc/encoder/bridge conditions checking even downstream interface is disabled. This cause the crash to happen at dp_bridge_disable() due to it trying to access the main link register to push the idle pattern out while main link clocks is disabled. This patch adds atomic_check to prevent the extra frame will not be pushed down if display interface is down so that crtc->active will not be set neither. This will fail the conditions checking of disabling down stream crtc/encoder/bridge which prevent drm_release() from calling dp_bridge_disable() so that crash at dp_bridge_disable() prevented. There is no protection in the DRM framework to check if the display pipeline has been already disabled before trying again. The only check is the crtc_state->active but this is controlled by usermode using UAPI. Hence if the usermode sets this and then crashes, the driver needs to protect against double disable. SError Interrupt on CPU7, code 0x00000000be000411 -- SError CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19 Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __cmpxchg_case_acq_32+0x14/0x2c lr : do_raw_spin_lock+0xa4/0xdc sp : ffffffc01092b6a0 x29: ffffffc01092b6a0 x28: 0000000000000028 x27: 0000000000000038 x26: 0000000000000004 x25: ffffffd2973dce48 x24: 0000000000000000 x23: 00000000ffffffff x22: 00000000ffffffff x21: ffffffd2978d0008 x20: ffffffd2978d0008 x19: ffffff80ff759fc0 x18: 0000000000000000 x17: 004800a501260460 x16: 0441043b04600438 x15: 04380000089807d0 x14: 07b0089807800780 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000438 x10: 00000000000007d0 x9 : ffffffd2973e09e4 x8 : ffffff8092d53300 x7 : ffffff808902e8b8 x6 : 0000000000000001 x5 : ffffff808902e880 x4 : 0000000000000000 x3 : ffffff80ff759fc0 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffff80ff759fc0 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19 Hardware name: Google Lazor (rev3 - 8) (DT) Call trace: dump_backtrace.part.0+0xbc/0xe4 show_stack+0x24/0x70 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 panic+0x14c/0x32c nmi_panic+0x58/0x7c arm64_serror_panic+0x78/0x84 do_serror+0x40/0x64 el1h_64_error_handler+0x30/0x48 el1h_64_error+0x68/0x6c __cmpxchg_case_acq_32+0x14/0x2c _raw_spin_lock_irqsave+0x38/0x4c lock_timer_base+0x40/0x78 __mod_timer+0xf4/0x25c schedule_timeout+0xd4/0xfc __wait_for_common+0xac/0x140 wait_for_completion_timeout+0x2c/0x54 dp_ctrl_push_idle+0x40/0x88 dp_bridge_disable+0x24/0x30 drm_atomic_bridge_chain_disable+0x90/0xbc drm_atomic_helper_commit_modeset_disables+0x198/0x444 msm_atomic_commit_tail+0x1d0/0x374 commit_tail+0x80/0x108 drm_atomic_helper_commit+0x118/0x11c drm_atomic_commit+0xb4/0xe0 drm_client_modeset_commit_atomic+0x184/0x224 drm_client_modeset_commit_locked+0x58/0x160 drm_client_modeset_commit+0x3c/0x64 __drm_fb_helper_restore_fbdev_mode_unlocked+0x98/0xac drm_fb_helper_set_par+0x74/0x80 drm_fb_helper_hotplug_event+0xdc/0xe0 __drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xac drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x2c drm_fb_helper_lastclose+0x20/0x2c drm_lastclose+0x44/0x6c drm_release+0x88/0xd4 __fput+0x104/0x220 ____fput+0x1c/0x28 task_work_run+0x8c/0x100 d ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: SDMA update use unlocked iterator SDMA update page table may be called from unlocked context, this generate below warning. Use unlocked iterator to handle this case. WARNING: CPU: 0 PID: 1475 at drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next Call Trace: dma_resv_iter_first+0x43/0xa0 amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu] amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu] amdgpu_vm_update_range+0x2f6/0x6c0 [amdgp ... In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: SDMA update use unlocked iterator SDMA update page table may be called from unlocked context, this generate below warning. Use unlocked iterator to handle this case. WARNING: CPU: 0 PID: 1475 at drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next Call Trace: dma_resv_iter_first+0x43/0xa0 amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu] amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu] amdgpu_vm_update_range+0x2f6/0x6c0 [amdgpu] svm_range_unmap_from_gpus+0x115/0x300 [amdgpu] svm_range_cpu_invalidate_pagetables+0x510/0x5e0 [amdgpu] __mmu_notifier_invalidate_range_start+0x1d3/0x230 unmap_vmas+0x140/0x150 unmap_region+0xa8/0x110

Show More

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix an Oops in nfs_d_automount() When mounting from a NFSv4 referral, path->dentry can end up being a negative dentry, so derive the struct nfs_server from the dentry itself instead.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can still occur which in turn tries to access dma apis if lpuart_dma_tx_use flag is true. At this point since dma is torn down, these dma apis can abort. Set lpuart_dma_tx_use and the corresponding rx flag lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not accessed a ... In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can still occur which in turn tries to access dma apis if lpuart_dma_tx_use flag is true. At this point since dma is torn down, these dma apis can abort. Set lpuart_dma_tx_use and the corresponding rx flag lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not accessed after they are relinquished. Otherwise, when try to kill btattach, kernel may panic. This patch may fix this issue. root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200 ^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 90.189806] Modules linked in: moal(O) mlan(O) [ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37 [ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT) [ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60 [ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c [ 90.225237] sp : ffff800013f0bac0 [ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800 [ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00 [ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000 [ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000 [ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040 [ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090 [ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804 [ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480 [ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800 [ 90.299876] Call trace: [ 90.302321] fsl_edma3_disable_request+0x8/0x60 [ 90.306851] lpuart_flush_buffer+0x40/0x160 [ 90.311037] uart_flush_buffer+0x88/0x120 [ 90.315050] tty_driver_flush_buffer+0x20/0x30 [ 90.319496] hci_uart_flush+0x44/0x90 [ 90.323162] +0x34/0x12c [ 90.327253] tty_ldisc_close+0x38/0x70 [ 90.331005] tty_ldisc_release+0xa8/0x190 [ 90.335018] tty_release_struct+0x24/0x8c [ 90.339022] tty_release+0x3ec/0x4c0 [ 90.342593] __fput+0x70/0x234 [ 90.345652] ____fput+0x14/0x20 [ 90.348790] task_work_run+0x84/0x17c [ 90.352455] do_exit+0x310/0x96c [ 90.355688] do_group_exit+0x3c/0xa0 [ 90.359259] __arm64_sys_exit_group+0x1c/0x20 [ 90.363609] invoke_syscall+0x48/0x114 [ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc [ 90.372068] do_el0_svc+0x2c/0x94 [ 90.375379] el0_svc+0x28/0x80 [ 90.378438] el0t_64_sync_handler+0xa8/0x130 [ 90.382711] el0t_64_sync+0x1a0/0x1a4 [ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041) [ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]--- [ 90.397073] note: btattach[503] exited with preempt_count 1 [ 90.402636] Fixing recursive fault but reboot is needed!

Show More

In the Linux kernel, the following vulnerability has been resolved: skbuff: Account for tail adjustment during pull operations Extending the tail can have some unexpected side effects if a program uses a helper like BPF_FUNC_skb_pull_data to read partial content beyond the head skb headlen when all the skbs in the gso frag_list are linear with no head_frag - kernel BUG at net/core/skbuff.c:4219! pc : skb_segment+0xcf4/0xd2c lr : skb_segment+0x63c/0xd2c Call trace: skb_segment+0xcf4 ... In the Linux kernel, the following vulnerability has been resolved: skbuff: Account for tail adjustment during pull operations Extending the tail can have some unexpected side effects if a program uses a helper like BPF_FUNC_skb_pull_data to read partial content beyond the head skb headlen when all the skbs in the gso frag_list are linear with no head_frag - kernel BUG at net/core/skbuff.c:4219! pc : skb_segment+0xcf4/0xd2c lr : skb_segment+0x63c/0xd2c Call trace: skb_segment+0xcf4/0xd2c __udp_gso_segment+0xa4/0x544 udp4_ufo_fragment+0x184/0x1c0 inet_gso_segment+0x16c/0x3a4 skb_mac_gso_segment+0xd4/0x1b0 __skb_gso_segment+0xcc/0x12c udp_rcv_segment+0x54/0x16c udp_queue_rcv_skb+0x78/0x144 udp_unicast_rcv_skb+0x8c/0xa4 __udp4_lib_rcv+0x490/0x68c udp_rcv+0x20/0x30 ip_protocol_deliver_rcu+0x1b0/0x33c ip_local_deliver+0xd8/0x1f0 ip_rcv+0x98/0x1a4 deliver_ptype_list_skb+0x98/0x1ec __netif_receive_skb_core+0x978/0xc60 Fix this by marking these skbs as GSO_DODGY so segmentation can handle the tail updates accordingly.

Show More

In the Linux kernel, the following vulnerability has been resolved: dmaengine: hisilicon: Add multi-thread support for a DMA channel When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 100 > /sys/module/dmatest/parameters/threads_per_chan % echo 100 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [383493.327077] Unable to handle kernel paging request at virtual address dead000000000108 [3 ... In the Linux kernel, the following vulnerability has been resolved: dmaengine: hisilicon: Add multi-thread support for a DMA channel When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 100 > /sys/module/dmatest/parameters/threads_per_chan % echo 100 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [383493.327077] Unable to handle kernel paging request at virtual address dead000000000108 [383493.335103] Mem abort info: [383493.335103] ESR = 0x96000044 [383493.335105] EC = 0x25: DABT (current EL), IL = 32 bits [383493.335107] SET = 0, FnV = 0 [383493.335108] EA = 0, S1PTW = 0 [383493.335109] FSC = 0x04: level 0 translation fault [383493.335110] Data abort info: [383493.335111] ISV = 0, ISS = 0x00000044 [383493.364739] CM = 0, WnR = 1 [383493.367793] [dead000000000108] address between user and kernel address ranges [383493.375021] Internal error: Oops: 96000044 [#1] PREEMPT SMP [383493.437574] CPU: 63 PID: 27895 Comm: dma0chan0-copy2 Kdump: loaded Tainted: GO 5.17.0-rc4+ #2 [383493.457851] pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [383493.465331] pc : vchan_tx_submit+0x64/0xa0 [383493.469957] lr : vchan_tx_submit+0x34/0xa0 This occurs because the transmission timed out, and that's due to data race. Each thread rewrite channels's descriptor as soon as device_issue_pending is called. It leads to the situation that the driver thinks that it uses the right descriptor in interrupt handler while channels's descriptor has been changed by other thread. The descriptor which in fact reported interrupt will not be handled any more, as well as its tx->callback. That's why timeout reports. With current fixes channels' descriptor changes it's value only when it has been used. A new descriptor is acquired from vc->desc_issued queue that is already filled with descriptors that are ready to be sent. Threads have no direct access to DMA channel descriptor. In case of channel's descriptor is busy, try to submit to HW again when a descriptor is completed. In this case, vc->desc_issued may be empty when hisi_dma_start_transfer is called, so delete error reporting on this. Now it is just possible to queue a descriptor for further processing.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix aux-bus EP lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP aux-bus, an attempt to ... In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix aux-bus EP lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP aux-bus, an attempt to populate the bus a second time will simply fail ("DP AUX EP device already populated"). Fix this by tying the lifetime of the EP device to the DRM device rather than DP controller platform device. Patchwork: https://patchwork.freedesktop.org/patch/502672/

Show More

In the Linux kernel, the following vulnerability has been resolved: brcmfmac: return error when getting invalid max_flowrings from dongle When firmware hit trap at initialization, host will read abnormal max_flowrings number from dongle, and it will cause kernel panic when doing iowrite to initialize dongle ring. To detect this error at early stage, we directly return error when getting invalid max_flowrings(>256).

In the Linux kernel, the following vulnerability has been resolved: cifs: fix oops during encryption When running xfstests against Azure the following oops occurred on an arm64 system Unable to handle kernel write to read-only memory at virtual address ffff0001221cf000 Mem abort info: ESR = 0x9600004f EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0f: level 3 permission fault Data abort info: ISV = 0, ISS = 0x0000004f ... In the Linux kernel, the following vulnerability has been resolved: cifs: fix oops during encryption When running xfstests against Azure the following oops occurred on an arm64 system Unable to handle kernel write to read-only memory at virtual address ffff0001221cf000 Mem abort info: ESR = 0x9600004f EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0f: level 3 permission fault Data abort info: ISV = 0, ISS = 0x0000004f CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000294f3000 [ffff0001221cf000] pgd=18000001ffff8003, p4d=18000001ffff8003, pud=18000001ff82e003, pmd=18000001ff71d003, pte=00600001221cf787 Internal error: Oops: 9600004f [#1] PREEMPT SMP ... pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) pc : __memcpy+0x40/0x230 lr : scatterwalk_copychunks+0xe0/0x200 sp : ffff800014e92de0 x29: ffff800014e92de0 x28: ffff000114f9de80 x27: 0000000000000008 x26: 0000000000000008 x25: ffff800014e92e78 x24: 0000000000000008 x23: 0000000000000001 x22: 0000040000000000 x21: ffff000000000000 x20: 0000000000000001 x19: ffff0001037c4488 x18: 0000000000000014 x17: 235e1c0d6efa9661 x16: a435f9576b6edd6c x15: 0000000000000058 x14: 0000000000000001 x13: 0000000000000008 x12: ffff000114f2e590 x11: ffffffffffffffff x10: 0000040000000000 x9 : ffff8000105c3580 x8 : 2e9413b10000001a x7 : 534b4410fb86b005 x6 : 534b4410fb86b005 x5 : ffff0001221cf008 x4 : ffff0001037c4490 x3 : 0000000000000001 x2 : 0000000000000008 x1 : ffff0001037c4488 x0 : ffff0001221cf000 Call trace: __memcpy+0x40/0x230 scatterwalk_map_and_copy+0x98/0x100 crypto_ccm_encrypt+0x150/0x180 crypto_aead_encrypt+0x2c/0x40 crypt_message+0x750/0x880 smb3_init_transform_rq+0x298/0x340 smb_send_rqst.part.11+0xd8/0x180 smb_send_rqst+0x3c/0x100 compound_send_recv+0x534/0xbc0 smb2_query_info_compound+0x32c/0x440 smb2_set_ea+0x438/0x4c0 cifs_xattr_set+0x5d4/0x7c0 This is because in scatterwalk_copychunks(), we attempted to write to a buffer (@sign) that was allocated in the stack (vmalloc area) by crypt_message() and thus accessing its remaining 8 (x2) bytes ended up crossing a page boundary. To simply fix it, we could just pass @sign kmalloc'd from crypt_message() and then we're done. Luckily, we don't seem to pass any other vmalloc'd buffers in smb_rqst::rq_iov... Instead, let's map the correct pages and offsets from vmalloc buffers as well in cifs_sg_set_buf() and then avoiding such oopses.

Show More

Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigg ... A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG. This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541.

Show More

A vulnerability in the implementation of Internet Key Exchange Version 1 (IKEv1) functionality in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific IKEv1 packets. An attacker could exploit this vulnerability by sending crafted IKEv1 packets to an affected device during an IKE negotiation. A successful explo ... A vulnerability in the implementation of Internet Key Exchange Version 1 (IKEv1) functionality in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific IKEv1 packets. An attacker could exploit this vulnerability by sending crafted IKEv1 packets to an affected device during an IKE negotiation. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuj73916.

Show More