Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: unexport __init-annotated seg6_hmac_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in lin ... In the Linux kernel, the following vulnerability has been resolved: net: ipv6: unexport __init-annotated seg6_hmac_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the caller (net/ipv6/seg6.c) and the callee (net/ipv6/seg6_hmac.c) belong to the same module. It seems an internal function call in ipv6.ko.

Show More

go-gh is a Go module for interacting with the `gh` utility and the GitHub API from the command line. A security vulnerability has been identified in `go-gh` that could leak authentication tokens intended for GitHub hosts to non-GitHub hosts when within a codespace. `go-gh` sources authentication tokens from different environment variables depending on the host involved: 1. `GITHUB_TOKEN`, `GH_TOKEN` for GitHub.com and ghe.com and 2. `GITHUB_ENTERPRISE_TOKEN`, `GH_ENTERPRISE_TOKEN` for GitHub Ent ... go-gh is a Go module for interacting with the `gh` utility and the GitHub API from the command line. A security vulnerability has been identified in `go-gh` that could leak authentication tokens intended for GitHub hosts to non-GitHub hosts when within a codespace. `go-gh` sources authentication tokens from different environment variables depending on the host involved: 1. `GITHUB_TOKEN`, `GH_TOKEN` for GitHub.com and ghe.com and 2. `GITHUB_ENTERPRISE_TOKEN`, `GH_ENTERPRISE_TOKEN` for GitHub Enterprise Server. Prior to version `2.11.1`, `auth.TokenForHost` could source a token from the `GITHUB_TOKEN` environment variable for a host other than GitHub.com or ghe.com when within a codespace. In version `2.11.1`, `auth.TokenForHost` will only source a token from the `GITHUB_TOKEN` environment variable for GitHub.com or ghe.com hosts. Successful exploitation could send authentication token to an unintended host. This issue has been addressed in version 2.11.1 and all users are advised to upgrade. Users are also advised to regenerate authentication tokens and to review their personal security log and any relevant audit logs for actions associated with their account or enterprise.

Show More

An issue was discovered in Mahara 23.04.8 and 24.04.4. Attackers may utilize escalation of privileges in certain cases when logging into Mahara with Learning Tools Interoperability (LTI).

A user authorized to access a view may be able to alter the intended collation, allowing them to access to a different or unintended view of underlying data. This issue affects MongoDB Server v5.0 version prior to 5.0.31, MongoDB Server v6.0 version prior to 6.0.20, MongoDB Server v7.0 version prior to 7.0.14 and MongoDB Server v7.3 versions prior to 7.3.4.

Improper access control vulnerability in Telephony prior to SMR Apr-2023 Release 1 allows attackers to access files with escalated permission.

Improper access control vulnerability in SLocation prior to SMR Apr-2022 Release 1 allows local attackers to get device location information using com.samsung.android.wifi.GEOFENCE action.

Improper access control vulnerability in SLocation prior to SMR Apr-2022 Release 1 allows local attackers to get device location information using com.samsung.android.wifi.NETWORK_LOCATION action.

Intent redirection vulnerability in SecSettings prior to SMR Apr-2022 Release 1 allows attackers to access arbitrary file with system privilege.

Improper input validation vulnerability in TIGERF trustlet prior to SMR Apr-2023 Release 1 allows local attackers to access protected data.

Improper input validation vulnerability in CertByte prior to SMR Apr-2023 Release 1 allows local attackers to launch privileged activities.

Keystone is a content management system for Node.js. Prior to version 6.5.0, `{field}.isFilterable` access control can be bypassed in `update` and `delete` mutations by adding additional unique filters. These filters can be used as an oracle to probe the existence or value of otherwise unreadable fields. Specifically, when a mutation includes a `where` clause with multiple unique filters (e.g. `id` and `email`), Keystone will attempt to match records even if filtering by the latter fields would ... Keystone is a content management system for Node.js. Prior to version 6.5.0, `{field}.isFilterable` access control can be bypassed in `update` and `delete` mutations by adding additional unique filters. These filters can be used as an oracle to probe the existence or value of otherwise unreadable fields. Specifically, when a mutation includes a `where` clause with multiple unique filters (e.g. `id` and `email`), Keystone will attempt to match records even if filtering by the latter fields would normally be rejected by `field.isFilterable` or `list.defaultIsFilterable`. This can allow malicious actors to infer the presence of a particular field value when a filter is successful in returning a result. This affects any project relying on the default or dynamic `isFilterable` behavior (at the list or field level) to prevent external users from using the filtering of fields as a discovery mechanism. While this access control is respected during `findMany` operations, it was not completely enforced during `update` and `delete` mutations when accepting more than one unique `where` values in filters. This has no impact on projects using `isFilterable: false` or `defaultIsFilterable: false` for sensitive fields, or for those who have otherwise omitted filtering by these fields from their GraphQL schema. This issue has been patched in `@keystone-6/core` version 6.5.0. To mitigate this issue in older versions where patching is not a viable pathway, set `isFilterable: false` statically for relevant fields to prevent filtering by them earlier in the access control pipeline (that is, don't use functions); set `{field}.graphql.omit.read: true` for relevant fields, which implicitly removes filtering by these fields from the GraphQL schema; and/or deny `update` and `delete` operations for the relevant lists completely.

Show More

Umbraco.Forms is a web form framework written for the nuget ecosystem. Character limits configured by editors for short and long answer fields are validated only client-side, not server-side. This issue has been patched in versions 8.13.16, 10.5.7, 13.2.2, and 14.1.2. Users are advised to upgrade. There are no known workarounds for this issue.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd va ... In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent crash when disable stream [Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder.

In the Linux kernel, the following vulnerability has been resolved: smb3: fix temporary data corruption in collapse range collapse range doesn't discard the affected cached region so can risk temporarily corrupting the file data. This fixes xfstest generic/031 I also decided to merge a minor cleanup to this into the same patch (avoiding rereading inode size repeatedly unnecessarily) to make it clearer.

In the Linux kernel, the following vulnerability has been resolved: smb3: fix temporary data corruption in insert range insert range doesn't discard the affected cached region so can risk temporarily corrupting file data. Also includes some minor cleanup (avoiding rereading inode size repeatedly unnecessarily) to make it clearer.

In the Linux kernel, the following vulnerability has been resolved: ice: Don't double unplug aux on peer initiated reset In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] i ... In the Linux kernel, the following vulnerability has been resolved: ice: Don't double unplug aux on peer initiated reset In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 R ---truncated---

Show More

In the Linux kernel, the following vulnerability has been resolved: net: enetc: deny offload of tc-based TSN features on VF interfaces TSN features on the ENETC (taprio, cbs, gate, police) are configured through a mix of command BD ring messages and port registers: enetc_port_rd(), enetc_port_wr(). Port registers are a region of the ENETC memory map which are only accessible from the PCIe Physical Function. They are not accessible from the Virtual Functions. Moreover, attempting to access th ... In the Linux kernel, the following vulnerability has been resolved: net: enetc: deny offload of tc-based TSN features on VF interfaces TSN features on the ENETC (taprio, cbs, gate, police) are configured through a mix of command BD ring messages and port registers: enetc_port_rd(), enetc_port_wr(). Port registers are a region of the ENETC memory map which are only accessible from the PCIe Physical Function. They are not accessible from the Virtual Functions. Moreover, attempting to access these registers crashes the kernel: $ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001 fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15 fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002) fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0 $ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2 Unable to handle kernel paging request at virtual address ffff800009551a08 Internal error: Oops: 96000007 [#1] PREEMPT SMP pc : enetc_setup_tc_taprio+0x170/0x47c lr : enetc_setup_tc_taprio+0x16c/0x47c Call trace: enetc_setup_tc_taprio+0x170/0x47c enetc_setup_tc+0x38/0x2dc taprio_change+0x43c/0x970 taprio_init+0x188/0x1e0 qdisc_create+0x114/0x470 tc_modify_qdisc+0x1fc/0x6c0 rtnetlink_rcv_msg+0x12c/0x390 Split enetc_setup_tc() into separate functions for the PF and for the VF drivers. Also remove enetc_qos.o from being included into enetc-vf.ko, since it serves absolutely no purpose there.

Show More

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0 When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage ... In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0 When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this: [ 135.245946] ------------[ cut here ]------------ [ 135.247579] kernel BUG at fs/ext4/extents.c:2258! [ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP [ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4 [ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0 [ 135.256475] Code: [ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246 [ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023 [ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c [ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c [ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024 [ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000 [ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0 [ 135.277952] Call Trace: [ 135.278635] <TASK> [ 135.279247] ? preempt_count_add+0x6d/0xa0 [ 135.280358] ? percpu_counter_add_batch+0x55/0xb0 [ 135.281612] ? _raw_read_unlock+0x18/0x30 [ 135.282704] ext4_map_blocks+0x294/0x5a0 [ 135.283745] ? xa_load+0x6f/0xa0 [ 135.284562] ext4_mpage_readpages+0x3d6/0x770 [ 135.285646] read_pages+0x67/0x1d0 [ 135.286492] ? folio_add_lru+0x51/0x80 [ 135.287441] page_cache_ra_unbounded+0x124/0x170 [ 135.288510] filemap_get_pages+0x23d/0x5a0 [ 135.289457] ? path_openat+0xa72/0xdd0 [ 135.290332] filemap_read+0xbf/0x300 [ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40 [ 135.292192] new_sync_read+0x103/0x170 [ 135.293014] vfs_read+0x15d/0x180 [ 135.293745] ksys_read+0xa1/0xe0 [ 135.294461] do_syscall_64+0x3c/0x80 [ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch simply adds an extra check in __ext4_ext_check(), verifying that eh_entries is not 0 when eh_depth is > 0.

Show More

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the ... In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem.

Show More

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix crash in chip reset fail In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own fa ... In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix crash in chip reset fail In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own failed. [ 5857.353423] mt7921e 0000:3b:00.0: driver own failed [ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own [ 5859.633430] mt7921e 0000:3b:00.0: driver own failed [ 5859.633444] ------------[ cut here ]------------ [ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d [ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common] [ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150 [ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202 ...... [ 5859.633766] Call Trace: [ 5859.633768] <TASK> [ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e] [ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common] [ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common] [ 5859.633794] ? __kasan_check_read+0x11/0x20 [ 5859.633802] process_one_work+0x7ee/0x1320 [ 5859.633810] worker_thread+0x53c/0x1240 [ 5859.633818] kthread+0x2b8/0x370 [ 5859.633824] ? process_one_work+0x1320/0x1320 [ 5859.633828] ? kthread_complete_and_exit+0x30/0x30 [ 5859.633834] ret_from_fork+0x1f/0x30 [ 5859.633842] </TASK>

Show More

In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the ... In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL.

Show More

In Janitza GridVis through 9.0.66, exposed dangerous methods in the de.janitza.pasw.project.server.ServerDatabaseProject project load functionality allow remote authenticated administrative users to execute arbitrary Groovy code.

A vulnerability classified as problematic has been found in Zhejiang Land Zongheng Network Technology O2OA up to 20240403. Affected is an unknown function of the file /x_portal_assemble_surface/jaxrs/portal/list?v=8.2.3-4-43f4fe3. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-260478 is the ident ... A vulnerability classified as problematic has been found in Zhejiang Land Zongheng Network Technology O2OA up to 20240403. Affected is an unknown function of the file /x_portal_assemble_surface/jaxrs/portal/list?v=8.2.3-4-43f4fe3. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-260478 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup The Linked list element and pointer are not stored in the same memory as the HDMA controller register. If the doorbell register is toggled before the full write of the linked list a race condition error will occur. In remote setup we can only use a readl to the memory to assure the full write has occurred.

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: fix racy skb_queue_empty() use The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer.

In the Linux kernel, the following vulnerability has been resolved: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The ... In the Linux kernel, the following vulnerability has been resolved: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver.

Show More

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd/pm: resolve reboot exception for si oland" This reverts commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86. This causes hangs on SI when DC is enabled and errors on driver reboot and power off cycles.

In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unn ... In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary.

Show More

In the Linux kernel, the following vulnerability has been resolved: xen/evtchn: avoid WARN() when unbinding an event channel When unbinding a user event channel, the related handler might be called a last time in case the kernel was built with CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler. Avoid that by adding an "unbinding" flag to struct user_event which will short circuit the handler.

In the Linux kernel, the following vulnerability has been resolved: ovl: relax WARN_ON in ovl_verify_area() syzbot hit an assertion in copy up data loop which looks like it is the result of a lower file whose size is being changed underneath overlayfs. This type of use case is documented to cause undefined behavior, so returning EIO error for the copy up makes sense, but it should not be causing a WARN_ON assertion.

SourceCodester Web-based Pharmacy Product Management System 1.0 is vulnerable to Incorrect Access Control, which allows low-privileged users to forge high privileged (such as admin) sessions and perform sensitive operations such as adding new users.

Exposure of sensitive information to an unauthorized actor in Xbox allows an unauthorized attacker to disclose information over a network.

Amazon Fire OS 7 before 7.6.6.9 and 8 before 8.1.0.3 allows Fire TV applications to establish local ADB (Android Debug Bridge) connections. NOTE: some third parties dispute whether this has security relevance, because an ADB connection is only possible after the (non-default) ADB Debugging option is enabled, and after the initiator of that specific connection attempt has been approved via a full-screen prompt.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix page frag corruption on page fault Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-spa ... In the Linux kernel, the following vulnerability has been resolved: tcp: fix page frag corruption on page fault Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric)

Show More

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down() As discussed in the past (commit 2d3916f31891 ("ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()")) I think the synchronize_net() call in ipv6_mc_down() is not needed. Under load, synchronize_net() can last between 200 usec and 5 ms. KASAN seems to agree as well.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: do not realloc workqueue everytime an interface is added Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to set the interface name in the workqueue name. However, while the driver needs only one workqueue, the wilc_netdev_ifc_init is called each time we add an interface over a phy, which in turns overwrite the workqueue w ... In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: do not realloc workqueue everytime an interface is added Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to set the interface name in the workqueue name. However, while the driver needs only one workqueue, the wilc_netdev_ifc_init is called each time we add an interface over a phy, which in turns overwrite the workqueue with a new one. This can be observed with the following commands: for i in $(seq 0 10) do iw phy phy0 interface add wlan1 type managed iw dev wlan1 del done ps -eo pid,comm|grep wlan 39 kworker/R-wlan0 98 kworker/R-wlan1 102 kworker/R-wlan1 105 kworker/R-wlan1 108 kworker/R-wlan1 111 kworker/R-wlan1 114 kworker/R-wlan1 117 kworker/R-wlan1 120 kworker/R-wlan1 123 kworker/R-wlan1 126 kworker/R-wlan1 129 kworker/R-wlan1 Fix this leakage by putting back hif_workqueue allocation in wilc_cfg80211_init. Regarding the workqueue name, it is indeed relevant to set it lowercase, however it is not attached to a specific netdev, so enforcing netdev name in the name is not so relevant. Still, enrich the name with the wiphy name to make it clear which phy is using the workqueue.

Show More

In the Linux kernel, the following vulnerability has been resolved: leds: trigger: netdev: Fix kernel panic on interface rename trig notify Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function. This changed the logic where, in the previous implementation the dev from t ... In the Linux kernel, the following vulnerability has been resolved: leds: trigger: netdev: Fix kernel panic on interface rename trig notify Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function. This changed the logic where, in the previous implementation the dev from the trigger event was used to check if the carrier was ok, but in the new implementation with the generic function, the dev in trigger_data is used instead. This is problematic and cause a possible kernel panic due to the fact that the dev in the trigger_data still reference the old one as the new one (passed from the trigger event) still has to be hold and saved in the trigger_data struct (done in the NETDEV_REGISTER case). On calling of get_device_state(), an invalid net_dev is used and this cause a kernel panic. To handle this correctly, move the call to get_device_state() after the new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER case) and correctly parse the new dev.

Show More

In the Linux kernel, the following vulnerability has been resolved: clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() 'p_clk' is an array allocated just before the for loop for all clk that need to be registered. It is incremented at each loop iteration. If a clk_register() call fails, 'p_clk' may point to something different from what should be freed. The best we can do, is to avoid this wrong release of memory.

In the Linux kernel, the following vulnerability has been resolved: powerpc/32: Fix hardlockup on vmap stack overflow Since the commit c118c7303ad5 ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct") a vmap stack overflow results in a hard lockup. This is because emergency_ctx is still addressed with its virtual address allthough data MMU is not active anymore at that time. Fix it by using a physical address instead.