Vulnerabilities (CVE)

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with the privileges of the root user of the underlying operating system. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input in the web UI. A successful exploit could allow an attacker to execute arbitrary commands on t ... A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with the privileges of the root user of the underlying operating system. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input in the web UI. A successful exploit could allow an attacker to execute arbitrary commands on the device with full root privileges.

Show More

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands ... A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

Show More

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulner ... Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

Show More

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with credentials to execute arbitrary OS commands by sending a specially crafted request to the product.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

D-Link DCS-8300LHV2 ONVIF SetSystemDateAndTime Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DCS-8300LHV2 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the implementation of the ONVIF API, which listens on TCP port 80. When parsing the sch:TZ XML element, ... D-Link DCS-8300LHV2 ONVIF SetSystemDateAndTime Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DCS-8300LHV2 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the implementation of the ONVIF API, which listens on TCP port 80. When parsing the sch:TZ XML element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21319.

Show More

Command injection when ingesting a remote Kaggle dataset due to a lack of input sanitization in the ingest_kaggle() API

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

An OS Command Injection vulnerability exists within myPRO Manager. A parameter within a command can be exploited by an unauthenticated remote attacker to inject arbitrary operating system commands.

A parameter within a command does not properly validate input within myPRO Manager which could be exploited by an unauthenticated remote attacker to inject arbitrary operating system commands.

D-Link DI-8200 16.07.26A1 is vulnerable to remote command execution in the msp_info_htm function via the flag parameter and cmd parameter.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

OS command injection vulnerability exists in AIPHONE IX SYSTEM and IXG SYSTEM. A network-adjacent authenticated attacker may execute an arbitrary OS command with root privileges by sending a specially crafted request.

Zoraxy is a general purpose HTTP reverse proxy and forwarding tool. A command injection vulnerability in the Web SSH feature allows an authenticated attacker to execute arbitrary commands as root on the host. Zoraxy has a Web SSH terminal feature that allows authenticated users to connect to SSH servers from their browsers. In HandleCreateProxySession the request to create an SSH session is handled. An attacker can exploit the username variable to escape from the bash command and inject arbitrar ... Zoraxy is a general purpose HTTP reverse proxy and forwarding tool. A command injection vulnerability in the Web SSH feature allows an authenticated attacker to execute arbitrary commands as root on the host. Zoraxy has a Web SSH terminal feature that allows authenticated users to connect to SSH servers from their browsers. In HandleCreateProxySession the request to create an SSH session is handled. An attacker can exploit the username variable to escape from the bash command and inject arbitrary commands into sshCommand. This is possible, because, unlike hostname and port, the username is not validated or sanitized.

Show More

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in Rakuten Turbo 5G firmware version V1.3.18 and earlier. If this vulnerability is exploited, a remote authenticated attacker may execute an arbitrary OS command.

A vulnerability has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102 and classified as critical. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ipDoamin leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272596. NOTE: The vendor was contacted early about this disclosure but did not respond in an ... A vulnerability has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102 and classified as critical. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ipDoamin leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272596. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

A vulnerability classified as critical has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. Affected is the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostTime leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272592. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Raisecom MSG1200, MSG2100E, MSG2200 and MSG2300 3.90. This affects an unknown part of the file list_base_config.php of the component Web Interface. The manipulation of the argument template leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272451.

A vulnerability was found in F-logic DataCube3 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /admin/config_time_sync.php of the component HTTP POST Request Handler. The manipulation of the argument ntp_server leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272347.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC 1.0. Affected by this issue is the function get_ip_addr_details of the file /view/dhcp/dhcpConfig/commit.php. The manipulation of the argument ethname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-269156. NOTE: The vendor was contacted early about this disclosure but did not respond in an ... A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC 1.0. Affected by this issue is the function get_ip_addr_details of the file /view/dhcp/dhcpConfig/commit.php. The manipulation of the argument ethname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-269156. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

Openfind's MailGates and MailAudit fail to properly filter user input when analyzing email attachments. An unauthenticated remote attacker can exploit this vulnerability to inject system commands and execute them on the remote server.

Command injection vulnerability in Comtrend router WLD71-T1_v2.0.201820, affecting the GRG-4280us version. This vulnerability could allow an authenticated user to execute commands inside the router by making a POST request to the URL “/boaform/admin/formUserTracert”.

The web services of Softnext's products, Mail SQR Expert and Mail Archiving Expert do not properly validate user input, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the remote server.

In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, the fix for CVE-2024-1874 does not work if the command name includes trailing spaces. Original issue: when using proc_open() command with array syntax, due to insufficient escaping, if the arguments of the executed command are controlled by a malicious user, the user can supply arguments that would execute arbitrary commands in Windows shell.

Missing input validation and OS command integration of the input in the utnserver Pro, utnserver ProMAX, INU-100 web-interface allows authenticated command injection.This issue affects utnserver Pro, utnserver ProMAX, INU-100 version 20.1.22 and below.

ASKEY 5G NR Small Cell fails to properly filter user input for certain functionality, allowing remote attackers with administrator privilege to execute arbitrary system commands on the remote server.

A vulnerability was found in Huashi Private Cloud CDN Live Streaming Acceleration Server up to 20240520. It has been classified as critical. Affected is an unknown function of the file /manager/ipconfig_new.php. The manipulation of the argument dev leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265992.

In WhatsUp Gold versions released before 2023.1.3, an unauthenticated Remote Code Execution vulnerability in Progress WhatsUpGold.  The Apm.UI.Areas.APM.Controllers.CommunityController allows execution of commands with iisapppool\nmconsole privileges.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

The CRUDDIY project is vulnerable to shell command injection via sending a crafted POST request to the application server.  The exploitation risk is limited since CRUDDIY is meant to be launched locally. Nevertheless, a user with the project running on their computer might visit a website which would send such a malicious request to the locally launched server.

A privilege escalation vulnerability was reported in Lenovo Service Bridge prior to version 5.0.2.17 that could allow operating system commands to be executed if a specially crafted link is visited.

A vulnerability classified as critical has been found in Faraday GM8181 and GM828x up to 20240429. Affected is an unknown function of the component NTP Service. The manipulation of the argument ntp_srv leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-263304.

N-Reporter and N-Cloud, products of the N-Partner, have an OS Command Injection vulnerability. Remote attackers with normal user privilege can execute arbitrary system commands by manipulating user inputs on a specific page.

xdg-desktop-portal-hyprland (aka an XDG Desktop Portal backend for Hyprland) before 1.3.3 allows OS command execution, e.g., because single quotes are not used when sending a list of app IDs and titles via the environment.

Wi-Fi Alliance wfa_dut (in Wi-Fi Test Suite) through 9.0.0 allows OS command injection via 802.11x frames because the system() library function is used. For example, on Arcadyan FMIMG51AX000J devices, this leads to wfaTGSendPing remote code execution as root via traffic to TCP port 8000 or 8080 on a LAN interface. On other devices, this may be exploitable over a WAN interface.

Starship is a cross-shell prompt. Starting in version 1.0.0 and prior to version 1.20.0, undocumented and unpredictable shell expansion and/or quoting rules make it easily to accidentally cause shell injection when using custom commands with starship in bash. This issue only affects users with custom commands, so the scope is limited, and without knowledge of others' commands, it could be hard to successfully target someone. Version 1.20.0 fixes the vulnerability.

Tenda FH1201 v1.2.0.14 was discovered to contain a command injection vulnerability via the mac parameter at ip/goform/WriteFacMac