Vulnerabilities (CVE)

OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload with the ping_addr parameter to ping.ccp.

Multiple OS command injection vulnerabilities exist in the formPingCmd functionality of Planet WGR-500 v1.3411b190912. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `counts` request parameter.

Multiple OS command injection vulnerabilities exist in the formPingCmd functionality of Planet WGR-500 v1.3411b190912. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `ipaddr` request parameter.

Multiple OS command injection vulnerabilities exist in the swctrl functionality of Planet WGR-500 v1.3411b190912. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is related to the `new_device_name` request parameter.

Multiple OS command injection vulnerabilities exist in the swctrl functionality of Planet WGR-500 v1.3411b190912. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is related to the `new_password` request parameter.

A security vulnerability has been detected in D-Link DAP-2695 2.00RC13. The impacted element is the function sub_4174B0 of the component Firmware Update Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in Ruijie RG-EG350 up to 20240318. Affected by this vulnerability is the function setAction of the file /itbox_pi/networksafe.php?a=set of the component HTTP POST Request Handler. The manipulation of the argument bandwidth leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257977 was assigned to this vulnerability. NOTE: The vendor was contacted early ... A vulnerability classified as critical was found in Ruijie RG-EG350 up to 20240318. Affected by this vulnerability is the function setAction of the file /itbox_pi/networksafe.php?a=set of the component HTTP POST Request Handler. The manipulation of the argument bandwidth leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257977 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

A vulnerability, which was classified as critical, has been found in Ruijie RG-EG350 up to 20240318. Affected by this issue is the function vpnAction of the file /itbox_pi/vpn_quickset_service.php?a=set_vpn of the component HTTP POST Request Handler. The manipulation of the argument ip/port/user/pass/dns/startIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257978 is the identifier assigned to this vulnerabil ... A vulnerability, which was classified as critical, has been found in Ruijie RG-EG350 up to 20240318. Affected by this issue is the function vpnAction of the file /itbox_pi/vpn_quickset_service.php?a=set_vpn of the component HTTP POST Request Handler. The manipulation of the argument ip/port/user/pass/dns/startIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257978 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Show More

IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the 'nobody' user via the BE_NAME parameter when installing a blacklist. When a blacklist is installed the application issues an HTTP POST to /cgi-bin/urlfilter.cgi and interpolates the value of BE_NAME directly into a shell invocation without appropriate sanitation. Crafted input can inject shell metacharacters, leading to arbitrary com ... IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the 'nobody' user via the BE_NAME parameter when installing a blacklist. When a blacklist is installed the application issues an HTTP POST to /cgi-bin/urlfilter.cgi and interpolates the value of BE_NAME directly into a shell invocation without appropriate sanitation. Crafted input can inject shell metacharacters, leading to arbitrary command execution in the context of the 'nobody' user.

Show More

IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the user 'nobody' via multiple parameters when creating a Proxy report. When a user creates a Proxy report the application issues an HTTP POST to /cgi-bin/logs.cgi/calamaris.dat and reads the values of DAY_BEGIN, MONTH_BEGIN, YEAR_BEGIN, DAY_END, MONTH_END, YEAR_END, NUM_DOMAINS, PERF_INTERVAL, NUM_CONTENT, HIST_LEVEL, NUM_HOSTS, NUM_URL ... IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the user 'nobody' via multiple parameters when creating a Proxy report. When a user creates a Proxy report the application issues an HTTP POST to /cgi-bin/logs.cgi/calamaris.dat and reads the values of DAY_BEGIN, MONTH_BEGIN, YEAR_BEGIN, DAY_END, MONTH_END, YEAR_END, NUM_DOMAINS, PERF_INTERVAL, NUM_CONTENT, HIST_LEVEL, NUM_HOSTS, NUM_URLS, and BYTE_UNIT, which are interpolated directly into the shell invocation of the mkreport helper. Because these parameters are never sanitized for improper characters or constructs, a crafted POST can inject shell metacharacters into one or more fields, causing arbitrary commands to run with the privileges of the 'nobody' user.

Show More

A vulnerability was detected in D-Link DAP-2695 2.00RC131. This affects the function fwupdater_main of the file rgbin of the component Firmware Update Handler. Performing manipulation results in os command injection. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

SolarView Compact ver.6.00 was discovered to contain a command injection vulnerability via conf_mail.php.

D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.

Nagios XI version xi-5.7.5 is affected by OS command injection. The vulnerability exists in the file /usr/local/nagiosxi/html/includes/configwizards/switch/switch.inc.php due to improper sanitization of authenticated user-controlled input by a single HTTP request, which can lead to OS command injection on the Nagios XI server.

Nagios XI version xi-5.7.5 is affected by OS command injection. The vulnerability exists in the file /usr/local/nagiosxi/html/includes/configwizards/cloud-vm/cloud-vm.inc.php due to improper sanitization of authenticated user-controlled input by a single HTTP request, which can lead to OS command injection on the Nagios XI server.

Accellion FTA 9_12_370 and earlier is affected by OS command execution via a crafted POST request to various admin endpoints. The fixed version is FTA_9_12_380 and later.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

Accellion FTA 9_12_411 and earlier is affected by OS command execution via a local web service call. The fixed version is FTA_9_12_416 and later.

Improper neutralization of special elements in the SMA100 management interface allows a remote authenticated attacker to inject arbitrary commands as a 'nobody' user which potentially leads to DoS.

Improper neutralization of special elements in the SMA100 SSL-VPN management interface allows a remote authenticated attacker with administrative privilege to inject arbitrary commands as a 'nobody' user, potentially leading to OS Command Injection Vulnerability.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

Zoho ManageEngine ADSelfService Plus before build 6122 allows a remote authenticated administrator to execute arbitrary operating OS commands as SYSTEM via the policy custom script feature. Due to the use of a default administrator password, attackers may be able to abuse this functionality with minimal effort. Additionally, a remote and partially authenticated attacker may be able to inject arbitrary commands into the custom script due to an unsanitized password field.

On ASUS RT-AX55 3.0.0.4.386.51598 devices, authenticated attackers can perform OS command injection via the /start_apply.htm qos_bw_rulelist parameter. NOTE: for the similar "token-generated module" issue, see CVE-2023-41345; for the similar "token-refresh module" issue, see CVE-2023-41346; for the similar "check token module" issue, see CVE-2023-41347; and for the similar "code-authentication module" issue, see CVE-2023-41348.

NextGen Healthcare Mirth Connect before version 4.4.1 is vulnerable to unauthenticated remote code execution. Note that this vulnerability is caused by the incomplete patch of CVE-2023-37679.

Certain EOL GeoVision devices have an OS Command Injection vulnerability. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device. Moreover, this vulnerability has already been exploited by attackers, and we have received related reports.

VMware NSX SD-WAN Edge by VeloCloud prior to version 3.1.0 contains a command injection vulnerability in the local web UI component. This component is disabled by default and should not be enabled on untrusted networks. VeloCloud by VMware will be removing this service from the product in future releases. Successful exploitation of this issue could result in remote code execution.

VMware Workspace One Access, Access Connector, Identity Manager, and Identity Manager Connector address have a command injection vulnerability.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade ... A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Show More

Certain EOL GeoVision devices fail to properly filter user input for the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

Edimax IC-7100 does not properly neutralize requests. An attacker can create specially crafted requests to achieve remote code execution on the device

Command injection vulnerability exists in the “Logging” page of the web-based configuration utility. An authenticated user with low privileged network access for the configuration utility can execute arbitrary commands on the underlying OS to obtain root SSH access to the TropOS 4th Gen device.

The “Diagnostics Tools” page of the web-based configuration utility does not properly validate user-controlled input, allowing an authenticated user with high privileges to inject commands into the command shell of the TropOS 4th Gen device. The injected commands can be exploited to execute several set-uid (SUID) applications to ultimately gain root access to the TropOS device.

win-cli-mcp-server resolveCommandPath Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of win-cli-mcp-server. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the resolveCommandPath method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leve ... win-cli-mcp-server resolveCommandPath Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of win-cli-mcp-server. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the resolveCommandPath method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-27787.

Show More

A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values. The entry process of the enforcer container is the monitor process. When the enforcer container stops, the monitor process checks whether the consul subprocess has exited. To perform this check, the monitor process uses the popen function to execute a shell command that determin ... A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values. The entry process of the enforcer container is the monitor process. When the enforcer container stops, the monitor process checks whether the consul subprocess has exited. To perform this check, the monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active. The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT are used directly to compose shell commands via popen without validation or sanitization. This behavior could allow a malicious user to inject malicious commands through these variables within the enforcer container.

Show More

Missing input validation and OS command integration of the input in the ORing IAP-420 web-interface allows authenticated command injection.This issue affects IAP-420 version 2.01e and below.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.40, USG FLEX series firmware versions from V4.50 through V5.40, USG FLEX 50(W) series firmware versions from V4.16 through V5.40, and USG20(W)-VPN series firmware versions from V4.16 through V5.40 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on the affected device by passing a crafted string as an argument to a CLI comm ... A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.40, USG FLEX series firmware versions from V4.50 through V5.40, USG FLEX 50(W) series firmware versions from V4.16 through V5.40, and USG20(W)-VPN series firmware versions from V4.16 through V5.40 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on the affected device by passing a crafted string as an argument to a CLI command.

Show More

A vulnerability in ESM 11.6.10 allows unauthenticated access to the internal Snowservice API and enables remote code execution through command injection, executed as the root user.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Microchip Time Provider 4100 allows OS Command Injection.This issue affects Time Provider 4100: before 2.5.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Microchip Time Provider 4100 allows OS Command Injection.This issue affects Time Provider 4100: before 2.5.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.