Vulnerabilities (CVE)

Linksys Velop 1.1.2.187020 devices allow unauthenticated command injection, providing an attacker with full root access, via cgi-bin/zbtest.cgi or cgi-bin/zbtest2.cgi (scripts that can be discovered with binwalk on the firmware, but are not visible in the web interface). This occurs because shell metacharacters in the query string are mishandled by ShellExecute, as demonstrated by the zbtest.cgi?cmd=level&level= substring. This can also be exploited via CSRF.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/sylogapply route. This could lead to command injection via the syslogIp parameter after /goform/clearlog is invoked.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

It was found that RHSA-2018:2918 did not fully fix CVE-2018-16509. An attacker could possibly exploit another variant of the flaw and bypass the -dSAFER protection to, for example, execute arbitrary shell commands via a specially crafted PostScript document. This only affects ghostscript 9.07 as shipped with Red Hat Enterprise Linux 7.

LINK-NET LW-N605R devices with firmware 12.20.2.1486 allow Remote Code Execution via shell metacharacters in the HOST field of the ping feature at adm/systools.asp. Authentication is needed but the default password of admin for the admin account may be used in some cases.

An issue was discovered in mgetty before 1.2.1. In fax_notify_mail() in faxrec.c, the mail_to parameter is not sanitized. It could allow for command injection if untrusted input can reach it, because popen is used.

An issue was discovered in mgetty before 1.2.1. In fax/faxq-helper.c, the function do_activate() does not properly sanitize shell metacharacters to prevent command injection. It is possible to use the ||, &&, or > characters within a file created by the "faxq-helper activate <jobid>" command.

A command injection vulnerability in PWS in Imperva SecureSphere 13.0.0.10 and 13.1.0.10 Gateway allows an attacker with authenticated access to execute arbitrary OS commands on a vulnerable installation.

VTech Storio Max before 56.D3JM6 allows remote command execution via shell metacharacters in an Android activity name. It exposes the storeintenttranslate.x service on port 1668 listening for requests on localhost. Requests submitted to this service are checked for a string of random characters followed by the name of an Android activity to start. Activities are started by inserting their name into a string that is executed in a shell command. By inserting metacharacters this can be exploited to ... VTech Storio Max before 56.D3JM6 allows remote command execution via shell metacharacters in an Android activity name. It exposes the storeintenttranslate.x service on port 1668 listening for requests on localhost. Requests submitted to this service are checked for a string of random characters followed by the name of an Android activity to start. Activities are started by inserting their name into a string that is executed in a shell command. By inserting metacharacters this can be exploited to run arbitrary commands as root. The requests also match those of the HTTP protocol and can be triggered on any web page rendered on the device by requesting resources stored at an http://127.0.0.1:1668/ URI, as demonstrated by the http://127.0.0.1:1668/dacdb70556479813fab2d92896596eef?';{ping,example.org}' URL.

Show More

The Photo Sharing Plus component on Sony Bravia TV through 8.587 devices allows Shell Metacharacter Injection.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.

A command injection vulnerability in libnmapp package for versions <0.4.16 allows arbitrary commands to be executed via arguments to the range options.

A command Injection in ps package versions <1.0.0 for Node.js allowed arbitrary commands to be executed when attacker controls the PID.

D-Link DIR-846 devices with firmware 100.26 allow remote attackers to execute arbitrary code as root via a SetNetworkTomographySettings request by leveraging admin access.

An issue was discovered on Tenda AC9 V15.03.05.19(6318)_CN and AC10 V15.03.06.23_CN devices. The mac parameter in a POST request is used directly in a doSystemCmd call, causing OS command injection.

A command injection vulnerability in the web server functionality of Moxa EDR-810 V4.2 build 18041013 allows remote attackers to execute arbitrary OS commands with root privilege via the caname parameter to the /xml/net_WebCADELETEGetValue URI.

An authenticated command injection vulnerability exists in IPFire Firewall before 2.21 Core Update 124 in backup.cgi. This allows an authenticated user with privileges for the affected page to execute arbitrary commands.

The network diagnostic function (ping) in the Yeahlink Ultra-elegant IP Phone SIP-T41P (firmware 66.83.0.35) allows a remote authenticated attacker to trigger OS commands or open a reverse shell via command injection.

A command injection (missing input validation, escaping) in the monitoring or memory status web interface in AudioCodes 405HD (firmware 2.2.12) VoIP phone allows an authenticated remote attacker in the same network as the device to trigger OS commands (like starting telnetd or opening a reverse shell) via a POST request to the web server. In combination with another attack (unauthenticated password change), the attacker can circumvent the authentication requirement.

Toshiba Home gateway HEM-GW16A 1.2.9 and earlier, Toshiba Home gateway HEM-GW26A 1.2.9 and earlier allows an attacker on the same network segment to execute arbitrary OS commands.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows an attacker on the same network segment to execute arbitrary OS commands via SOAP interface of UPnP.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows authenticated attackers to execute arbitrary OS commands via unspecified vectors.

RICOH Interactive Whiteboard D2200 V1.6 to V2.2, D5500 V1.6 to V2.2, D5510 V1.6 to V2.2, and the display versions with RICOH Interactive Whiteboard Controller Type1 V1.6 to V2.2 attached (D5520, D6500, D6510, D7500, D8400) allows remote attackers to execute arbitrary commands via unspecified vectors.

LogonTracer 1.2.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

The web management console of Opsview Monitor 5.4.x before 5.4.2 provides functionality accessible by an authenticated administrator to test notifications that are triggered under certain configurable events. The value parameter is not properly sanitized, leading to arbitrary command injection with the privileges of the nagios user account.

The test connection functionality in the NetAudit section of Opsview Monitor before 5.3.1 and 5.4.x before 5.4.2 is vulnerable to command injection due to improper sanitization of the rancid_password parameter.

System command injection in request_mitv in Xiaomi Mi Router 3 version 2.22.15 allows attackers to execute arbitrary system commands via the "payload" URL parameter.

A shell escape vulnerability in /webconsole/APIController in the API Configuration component of Sophos XG firewall 17.0.8 MR-8 allows remote attackers to execute arbitrary OS commands via shell metachracters in the "X-Forwarded-for" HTTP header.

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

In System Management Module (SMM) versions prior to 1.06, the SMM certificate creation and parsing logic is vulnerable to post-authentication command injection.

In System Management Module (SMM) versions prior to 1.06, a field in the header of SMM firmware update images is insufficiently sanitized, allowing post-authentication command injection on the SMM as the root user.

An authenticated command injection vulnerability exists in status_interfaces.php via dhcp_relinquish_lease() in pfSense before 2.4.4 due to its passing user input from the $_POST parameters "ifdescr" and "ipv" to a shell without escaping the contents of the variables. This allows an authenticated WebGUI user with privileges for the affected page to execute commands in the context of the root user when submitting a request to relinquish a DHCP lease for an interface which is configured to obtain ... An authenticated command injection vulnerability exists in status_interfaces.php via dhcp_relinquish_lease() in pfSense before 2.4.4 due to its passing user input from the $_POST parameters "ifdescr" and "ipv" to a shell without escaping the contents of the variables. This allows an authenticated WebGUI user with privileges for the affected page to execute commands in the context of the root user when submitting a request to relinquish a DHCP lease for an interface which is configured to obtain its address via DHCP.

Show More

Main_Analysis_Content.asp in ASUS DSL-N12E_C1 1.1.2.3_345 is prone to Authenticated Remote Command Execution, which allows a remote attacker to execute arbitrary OS commands via service parameters, such as shell metacharacters in the destIP parameter of a cmdMethod=ping request.

The Plainview Activity Monitor plugin before 20180826 for WordPress is vulnerable to OS command injection via shell metacharacters in the ip parameter of a wp-admin/admin.php?page=plainview_activity_monitor&tab=activity_tools request.

The Pulse Secure Desktop (macOS) 5.3RX before 5.3R5 and 9.0R1 has a Privilege Escalation Vulnerability.

The Logitech Harmony Hub before version 4.15.206 is vulnerable to OS command injection via the time update request. A remote server or man in the middle can inject OS commands with a properly formatted response.

NUUO NVRMini2 version 3.9.1 is vulnerable to authenticated remote command injection. An attacker can send crafted requests to upgrade_handle.php to execute OS commands as root.

Nagios XI 5.5.6 allows remote authenticated attackers to reset and regenerate the API key of more privileged users. The attacker can then use the new API key to execute API calls at elevated privileges.