Vulnerabilities (CVE)

A compromised content process could have performed session history manipulations it should not have been able to due to testing infrastructure that was not restricted to testing-only configurations. This vulnerability affects Firefox < 88.

The browser could have been confused into transferring a screen sharing state into another tab, which would leak unintended information. This vulnerability affects Firefox < 85.

Installations, where crafter-search is not protected, allow unauthenticated remote attackers to create, view, and delete search indexes.

Unauthenticated remote attackers can read textual content via FreeMarker including files /scripts/*, /templates/* and some of the files in /.git/* (non-binary).

On BIG-IP version 16.x before 16.1.0 and 15.1.x before 15.1.3.1, when a DNS profile using a DNS cache resolver is configured on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this wea ... curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.

Show More

An improper access control vulnerability in GitHub Enterprise Server allowed a workflow job to execute in a self-hosted runner group it should not have had access to. This affects customers using self-hosted runner groups for access control. A repository with access to one enterprise runner group could access all of the enterprise runner groups within the organization because of improper authentication checks during the request. This could cause code to be run unintentionally by the incorrect ru ... An improper access control vulnerability in GitHub Enterprise Server allowed a workflow job to execute in a self-hosted runner group it should not have had access to. This affects customers using self-hosted runner groups for access control. A repository with access to one enterprise runner group could access all of the enterprise runner groups within the organization because of improper authentication checks during the request. This could cause code to be run unintentionally by the incorrect runner group. This vulnerability affected GitHub Enterprise Server versions from 3.0.0 to 3.0.15 and 3.1.0 to 3.1.7 and was fixed in 3.0.16 and 3.1.8 releases.

Show More

On unix-like systems, the system temporary directory is shared between all users on that system. The root cause is File.createTempFile creates files in the the system temporary directory with world readable permissions. Any sensitive information written to theses files is visible to all other local users on unix-like systems. We recommend upgrading past commit https://github.com/google/data-transfer-project/pull/969

When using the dart pub publish command to publish a package to a third-party package server, the request would be authenticated with an oauth2 access_token that is valid for publishing on pub.dev. Using these obtained credentials, an attacker can impersonate the user on pub.dev. We recommend upgrading past https://github.com/dart-lang/sdk/commit/d787e78d21e12ec1ef712d229940b1172aafcdf8 or beyond version 2.15.0

An attacker can modify the pointers in enclave memory to overwrite arbitrary memory addresses within the secure enclave. It is recommended to update past 0.6.3 or git commit https://github.com/google/asylo/commit/a47ef55db2337d29de19c50cd29b0deb2871d31c

An attacker can modify the address to point to trusted memory to overwrite arbitrary trusted memory. It is recommended to update past 0.6.2 or git commit https://github.com/google/asylo/commit/53ed5d8fd8118ced1466e509606dd2f473707a5c

An attacker can place a crafted JSON config file into the project folder pointing to a custom executable. VScode-bazel allows the workspace path to lint *.bzl files to be set via this config file. As such the attacker is able to execute any executable on the system through vscode-bazel. We recommend upgrading to version 0.4.1 or above.

A component of the HarmonyOS has a Exposure of Sensitive Information to an Unauthorized Actor vulnerability. Local attackers may exploit this vulnerability to cause kernel address leakage.

A component of the HarmonyOS has a External Control of System or Configuration Setting vulnerability. Local attackers may exploit this vulnerability to cause core dump.

A component of the HarmonyOS has a External Control of System or Configuration Setting vulnerability. Local attackers may exploit this vulnerability to cause the underlying trust of the application trustlist mechanism is missing..

A component of the Huawei smartphone has a External Control of System or Configuration Setting vulnerability. Local attackers may exploit this vulnerability to cause Kernel Code Execution.

In Spring Framework, versions 5.2.x prior to 5.2.15 and versions 5.3.x prior to 5.3.7, a WebFlux application is vulnerable to a privilege escalation: by (re)creating the temporary storage directory, a locally authenticated malicious user can read or modify files that have been uploaded to the WebFlux application, or overwrite arbitrary files with multipart request data.

In Spring Data REST versions 3.4.0 - 3.4.13, 3.5.0 - 3.5.5, and older unsupported versions, HTTP resources implemented by custom controllers using a configured base API path and a controller type-level request mapping are additionally exposed under URIs that can potentially be exposed for unauthorized access depending on the Spring Security configuration.

In Spring Cloud OpenFeign 3.0.0 to 3.0.4, 2.2.0.RELEASE to 2.2.9.RELEASE, and older unsupported versions, applications using type-level `@RequestMapping`annotations over Feign client interfaces, can be involuntarily exposing endpoints corresponding to `@RequestMapping`-annotated interface methods.

The vCenter Server contains multiple denial-of-service vulnerabilities in VAPI (vCenter API) service. A malicious actor with network access to port 443 on vCenter Server may exploit these issues to create a denial of service condition due to excessive memory consumption by VAPI service.

A local file inclusion vulnerability exists in the Web Manager Applications and FsBrowse functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted series of HTTP requests can lead to local file inclusion. An attacker can make a series of authenticated HTTP requests to trigger this vulnerability.

OpenAPI Generator allows generation of API client libraries (SDK generation), server stubs, documentation and configuration automatically given an OpenAPI Spec. Using `File.createTempFile` in JDK will result in creating and using insecure temporary files that can leave application and system data vulnerable to attacks. Auto-generated code (Java, Scala) that deals with uploading or downloading binary data through API endpoints will create insecure temporary files during the process. Affected gene ... OpenAPI Generator allows generation of API client libraries (SDK generation), server stubs, documentation and configuration automatically given an OpenAPI Spec. Using `File.createTempFile` in JDK will result in creating and using insecure temporary files that can leave application and system data vulnerable to attacks. Auto-generated code (Java, Scala) that deals with uploading or downloading binary data through API endpoints will create insecure temporary files during the process. Affected generators: `java` (jersey2, okhttp-gson (default library)), `scala-finch`. The issue has been patched with `Files.createTempFile` and released in the v5.1.0 stable version.

Show More

Openapi generator is a java tool which allows generation of API client libraries (SDK generation), server stubs, documentation and configuration automatically given an OpenAPI Spec. openapi-generator-online creates insecure temporary folders with File.createTempFile during the code generation process. The insecure temporary folders store the auto-generated files which can be read and appended to by any users on the system. The issue has been patched with `Files.createTempFile` and released in th ... Openapi generator is a java tool which allows generation of API client libraries (SDK generation), server stubs, documentation and configuration automatically given an OpenAPI Spec. openapi-generator-online creates insecure temporary folders with File.createTempFile during the code generation process. The insecure temporary folders store the auto-generated files which can be read and appended to by any users on the system. The issue has been patched with `Files.createTempFile` and released in the v5.1.0 stable version.

Show More

Restund is an open source NAT traversal server. The restund TURN server can be instructed to open a relay to the loopback address range. This allows you to reach any other service running on localhost which you might consider private. In the configuration that we ship (https://github.com/wireapp/ansible-restund/blob/master/templates/restund.conf.j2#L40-L43) the `status` interface of restund is enabled and is listening on `127.0.0.1`.The `status` interface allows users to issue administrative com ... Restund is an open source NAT traversal server. The restund TURN server can be instructed to open a relay to the loopback address range. This allows you to reach any other service running on localhost which you might consider private. In the configuration that we ship (https://github.com/wireapp/ansible-restund/blob/master/templates/restund.conf.j2#L40-L43) the `status` interface of restund is enabled and is listening on `127.0.0.1`.The `status` interface allows users to issue administrative commands to `restund` like listing open relays or draining connections. It would be possible for an attacker to contact the status interface and issue administrative commands by setting `XOR-PEER-ADDRESS` to `127.0.0.1:{{restund_udp_status_port}}` when opening a TURN channel. We now explicitly disallow relaying to loopback addresses, 'any' addresses, link local addresses, and the broadcast address. As a workaround disable the `status` module in your restund configuration. However there might still be other services running on `127.0.0.0/8` that you do not want to have exposed. The `turn` module can be disabled. Restund will still perform STUN and this might already be enough for initiating calls in your environments. TURN is only used as a last resort when other NAT traversal options do not work. One should also make sure that the TURN server is set up with firewall rules so that it cannot relay to other addresses that you don't want the TURN server to relay to. For example other services in the same VPC where the TURN server is running. Ideally TURN servers should be deployed in an isolated fashion where they can only reach what they need to reach to perform their task of assisting NAT-traversal.

Show More

In containerd (an industry-standard container runtime) before versions 1.3.10 and 1.4.4, containers launched through containerd's CRI implementation (through Kubernetes, crictl, or any other pod/container client that uses the containerd CRI service) that share the same image may receive incorrect environment variables, including values that are defined for other containers. If the affected containers have different security contexts, this may allow sensitive information to be unintentionally sha ... In containerd (an industry-standard container runtime) before versions 1.3.10 and 1.4.4, containers launched through containerd's CRI implementation (through Kubernetes, crictl, or any other pod/container client that uses the containerd CRI service) that share the same image may receive incorrect environment variables, including values that are defined for other containers. If the affected containers have different security contexts, this may allow sensitive information to be unintentionally shared. If you are not using containerd's CRI implementation (through one of the mechanisms described above), you are not vulnerable to this issue. If you are not launching multiple containers or Kubernetes pods from the same image which have different environment variables, you are not vulnerable to this issue. If you are not launching multiple containers or Kubernetes pods from the same image in rapid succession, you have reduced likelihood of being vulnerable to this issue This vulnerability has been fixed in containerd 1.3.10 and containerd 1.4.4. Users should update to these versions.

Show More

Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory ... Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory is shared between all user. As such, writing to this directory using APIs that do not explicitly set the file/directory permissions can lead to information disclosure. Of note, this does not impact modern MacOS Operating Systems. The method "File.createTempFile" on unix-like systems creates a random file, but, by default will create this file with the permissions "-rw-r--r--". Thus, if sensitive information is written to this file, other local users can read this information. This is the case in netty's "AbstractDiskHttpData" is vulnerable. This has been fixed in version 4.1.59.Final. As a workaround, one may specify your own "java.io.tmpdir" when you start the JVM or use "DefaultHttpDataFactory.setBaseDir(...)" to set the directory to something that is only readable by the current user.

Show More

In Weidmüller u-controls and IoT-Gateways in versions up to 1.12.1 a network port intended only for device-internal usage is accidentally accessible via external network interfaces. By exploiting this vulnerability the device may be manipulated or the operation may be stopped.

IBM Jazz Team Server 6.0.6, 6.0.6.1, 7.0, 7.0.1, and 7.0.2 allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 199149.

IBM Cognos Analytics 10.0 and 11.1 is susceptible to a weakness in the implementation of the System Appearance configuration setting. An attacker could potentially bypass business logic to modify the appearance and behavior of the application. IBM X-Force ID: 196770.

A vulnerability in Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to gain access to sensitive information on an affected device. The vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the CLI. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to read arbitrar ... A vulnerability in Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to gain access to sensitive information on an affected device. The vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the CLI. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to read arbitrary files that they originally did not have permissions to access.

Show More

A vulnerability in the implementation of a CLI command in Cisco Aironet Access Points (AP) could allow an authenticated, local attacker to overwrite files in the flash memory of the device. This vulnerability is due to insufficient input validation for a specific command. An attacker could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to overwrite or create files with data that is already present in other files that are host ... A vulnerability in the implementation of a CLI command in Cisco Aironet Access Points (AP) could allow an authenticated, local attacker to overwrite files in the flash memory of the device. This vulnerability is due to insufficient input validation for a specific command. An attacker could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to overwrite or create files with data that is already present in other files that are hosted on the affected device.

Show More

In Settings, there is a possible way to determine whether an app is installed without query permissions, due to side channel information disclosure. This could lead to local information disclosure of an installed package, without proper query permissions, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-189122911

In processInboundMessage of MceStateMachine.java, there is a possible SMS disclosure due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.1 Android-9Android ID: A-177238342

In updateNotification of BeamTransferManager.java, there is a missing permission check. This could lead to local information disclosure of paired Bluetooth addresses with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-168712890

An Insecure Temporary File vulnerability in FortiClient for Windows 6.2.1 and below may allow a local user to gain elevated privileges via exhausting the pool of temporary file names combined with a symbolic link attack.

Improper isolation of shared resources in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.

An issue was discovered in Squid before 4.10. Due to incorrect input validation, it can interpret crafted HTTP requests in unexpected ways to access server resources prohibited by earlier security filters.

A bug in Nextcloud Server 14.0.4 could expose more data in reshared link shares than intended by the sharer.

In JetBrains YouTrack before 2019.2.59309, SMTP/Jabber settings could be accessed using backups.

Improper Access Control in the Kiosk Mode functionality of Bosch Recording Station allows a local unauthenticated attacker to escape from the Kiosk Mode and access the underlying operating system.