| CVE |
Vendors |
Products |
Updated |
CVSS v2 |
CVSS v3 |
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<TASK>
gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n ...
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<TASK>
gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
__pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm]
__pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389
update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500
__pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846
__rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
_raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107
__pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm]
ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195
ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79
__pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338
__pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
Allocated by task 65:
gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm]
gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm]
gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm]
gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm]
tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391
tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39
flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445
process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229
worker_thread+0x3dc/0x950 kernel/workqueue.c:3391
kthread+0x2a3/0x370 kernel/kthread.c:389
ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257
Freed by task 3367:
kfree+0x126/0x420 mm/slub.c:4580
gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
[Analysis]
gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux
can be freed by multi threads through ioctl,which leads
to the occurrence of uaf. Protect it by gsm tx lock.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by fol ...
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through k ...
In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:
CPU0 CPU1
| check_link_status_work
switchtec_ntb_remove |
kfree(sndev); |
| if (sndev->link_force_down)
| // use sndev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/stm: Avoid use-after-free issues with crtc and plane
ltdc_load() calls functions drm_crtc_init_with_planes(),
drm_universal_plane_init() and drm_encoder_init(). These functions
should not be called with parameters allocated with devm_kzalloc()
to avoid use-after-free issues [1].
Use allocations managed by the DRM framework.
Found by Linux Verification Center (linuxtesting.org).
[1]
https://lore.kernel.org/lkml/u366i76e3 ...
In the Linux kernel, the following vulnerability has been resolved:
drm/stm: Avoid use-after-free issues with crtc and plane
ltdc_load() calls functions drm_crtc_init_with_planes(),
drm_universal_plane_init() and drm_encoder_init(). These functions
should not be called with parameters allocated with devm_kzalloc()
to avoid use-after-free issues [1].
Use allocations managed by the DRM framework.
Found by Linux Verification Center (linuxtesting.org).
[1]
https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer
Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug.
|
|
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
|
In the Linux kernel, the following vulnerability has been resolved:
aoe: fix the potential use-after-free problem in more places
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), pr ...
In the Linux kernel, the following vulnerability has been resolved:
aoe: fix the potential use-after-free problem in more places
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
media: venus: fix use after free bug in venus_remove due to race condition
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_e ...
In the Linux kernel, the following vulnerability has been resolved:
media: venus: fix use after free bug in venus_remove due to race condition
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_error_handler
venus_remove |
hfi_destroy |
venus_hfi_destroy |
kfree(hdev); |
|hfi_reinit
|venus_hfi_queues_reinit
|//use hdev
Fix it by canceling the work in venus_remove.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cancel dqi_sync_work before freeing oinfo
ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the
end, if error occurs after successfully reading global quota, it will
trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled:
ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c
This reports that there is an active delayed work w ...
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cancel dqi_sync_work before freeing oinfo
ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the
end, if error occurs after successfully reading global quota, it will
trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled:
ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c
This reports that there is an active delayed work when freeing oinfo in
error handling, so cancel dqi_sync_work first. BTW, return status instead
of -1 when .read_file_info fails.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix timer use-after-free on failed mount
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This trigger ...
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix timer use-after-free on failed mount
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix uaf in l2cap_connect
[Syzbot reported]
BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54
CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: ...
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix uaf in l2cap_connect
[Syzbot reported]
BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54
CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci2 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline]
l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825
l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514
hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline]
hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
...
Freed by task 5245:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
poison_slab_object+0xf7/0x160 mm/kasan/common.c:240
__kasan_slab_free+0x32/0x50 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2256 [inline]
slab_free mm/slub.c:4477 [inline]
kfree+0x12a/0x3b0 mm/slub.c:4598
l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline]
l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802
l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241
hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline]
hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265
hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583
abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917
hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
net/xen-netback: prevent UAF in xenvif_flush_hash()
During the list_for_each_entry_rcu iteration call of xenvif_flush_hash,
kfree_rcu does not exist inside the rcu read critical section, so if
kfree_rcu is called when the rcu grace period ends during the iteration,
UAF occurs when accessing head->next after the entry becomes free.
Therefore, to solve this, you need to change it to list_for_each_entry_safe.
|
In the Linux kernel, the following vulnerability has been resolved:
fbdev: pxafb: Fix possible use after free in pxafb_task()
In the pxafb_probe function, it calls the pxafb_init_fbinfo function,
after which &fbi->task is associated with pxafb_task. Moreover,
within this pxafb_init_fbinfo function, the pxafb_blank function
within the &pxafb_ops struct is capable of scheduling work.
If we remove the module which will call pxafb_remove to make cleanup,
it will call unregister_framebuffer functi ...
In the Linux kernel, the following vulnerability has been resolved:
fbdev: pxafb: Fix possible use after free in pxafb_task()
In the pxafb_probe function, it calls the pxafb_init_fbinfo function,
after which &fbi->task is associated with pxafb_task. Moreover,
within this pxafb_init_fbinfo function, the pxafb_blank function
within the &pxafb_ops struct is capable of scheduling work.
If we remove the module which will call pxafb_remove to make cleanup,
it will call unregister_framebuffer function which can call
do_unregister_framebuffer to free fbi->fb through
put_fb_info(fb_info), while the work mentioned above will be used.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| pxafb_task
pxafb_remove |
unregister_framebuffer(info) |
do_unregister_framebuffer(fb_info) |
put_fb_info(fb_info) |
// free fbi->fb | set_ctrlr_state(fbi, state)
| __pxafb_lcd_power(fbi, 0)
| fbi->lcd_power(on, &fbi->fb.var)
| //use fbi->fb
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in pxafb_remove.
Note that only root user can remove the driver at runtime.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix uaf in dbFreeBits
[syzbot reported]
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752
Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216
CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-sy ...
In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix uaf in dbFreeBits
[syzbot reported]
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752
Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216
CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
__mutex_lock_common kernel/locking/mutex.c:587 [inline]
__mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752
dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390
dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline]
dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409
dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650
jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100
jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
Freed by task 5218:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
__kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2252 [inline]
slab_free mm/slub.c:4473 [inline]
kfree+0x149/0x360 mm/slub.c:4594
dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278
jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247
jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454
reconfigure_super+0x445/0x880 fs/super.c:1083
vfs_cmd_reconfigure fs/fsopen.c:263 [inline]
vfs_fsconfig_locked fs/fsopen.c:292 [inline]
__do_sys_fsconfig fs/fsopen.c:473 [inline]
__se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Analysis]
There are two paths (dbUnmount and jfs_ioc_trim) that generate race
condition when accessing bmap, which leads to the occurrence of uaf.
Use the lock s_umount to synchronize them, in order to avoid uaf caused
by race condition.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid use-after-free in ext4_ext_show_leaf()
In ext4_find_extent(), path may be freed by error or be reallocated, so
using a previously saved *ppath may have been freed and thus may trigger
use-after-free, as follows:
ext4_split_extent
path = *ppath;
ext4_split_extent_at(ppath)
path = ext4_find_extent(ppath)
ext4_split_extent_at(ppath)
// ext4_find_extent fails to free path
// but zeroout succeeds
ext4 ...
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid use-after-free in ext4_ext_show_leaf()
In ext4_find_extent(), path may be freed by error or be reallocated, so
using a previously saved *ppath may have been freed and thus may trigger
use-after-free, as follows:
ext4_split_extent
path = *ppath;
ext4_split_extent_at(ppath)
path = ext4_find_extent(ppath)
ext4_split_extent_at(ppath)
// ext4_find_extent fails to free path
// but zeroout succeeds
ext4_ext_show_leaf(inode, path)
eh = path[depth].p_hdr
// path use-after-free !!!
Similar to ext4_split_extent_at(), we use *ppath directly as an input to
ext4_ext_show_leaf(). Fix a spelling error by the way.
Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only
used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly.
This issue is triggered only when EXT_DEBUG is defined and therefore does
not affect functionality.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-use-after-free in ext4_split_extent_at()
We hit the following use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0
Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40
CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724
Call Trace:
<TASK>
kasan_report+0x93/0xc0
ext4_split_extent_at+0xba8/ ...
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-use-after-free in ext4_split_extent_at()
We hit the following use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0
Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40
CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724
Call Trace:
<TASK>
kasan_report+0x93/0xc0
ext4_split_extent_at+0xba8/0xcc0
ext4_split_extent.isra.0+0x18f/0x500
ext4_split_convert_extents+0x275/0x750
ext4_ext_handle_unwritten_extents+0x73e/0x1580
ext4_ext_map_blocks+0xe20/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
Allocated by task 40:
__kmalloc_noprof+0x1ac/0x480
ext4_find_extent+0xf3b/0x1e70
ext4_ext_map_blocks+0x188/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
Freed by task 40:
kfree+0xf1/0x2b0
ext4_find_extent+0xa71/0x1e70
ext4_ext_insert_extent+0xa22/0x3260
ext4_split_extent_at+0x3ef/0xcc0
ext4_split_extent.isra.0+0x18f/0x500
ext4_split_convert_extents+0x275/0x750
ext4_ext_handle_unwritten_extents+0x73e/0x1580
ext4_ext_map_blocks+0xe20/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
==================================================================
The flow of issue triggering is as follows:
ext4_split_extent_at
path = *ppath
ext4_ext_insert_extent(ppath)
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(orig_path)
path = *orig_path
read_extent_tree_block
// return -ENOMEM or -EIO
ext4_free_ext_path(path)
kfree(path)
*orig_path = NULL
a. If err is -ENOMEM:
ext4_ext_dirty(path + path->p_depth)
// path use-after-free !!!
b. If err is -EIO and we have EXT_DEBUG defined:
ext4_ext_show_leaf(path)
eh = path[depth].p_hdr
// path also use-after-free !!!
So when trying to zeroout or fix the extent length, call ext4_find_extent()
to update the path.
In addition we use *ppath directly as an ext4_ext_show_leaf() input to
avoid possible use-after-free when EXT_DEBUG is defined, and to avoid
unnecessary path updates.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ext4: aovid use-after-free in ext4_ext_insert_extent()
As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is
reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and
cause UAF. Below is a sample trace with dummy values:
ext4_ext_insert_extent
path = *ppath = 2000
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(ppath)
path = *ppath = 2000
if (depth > path[0].p_maxdepth)
...
In the Linux kernel, the following vulnerability has been resolved:
ext4: aovid use-after-free in ext4_ext_insert_extent()
As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is
reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and
cause UAF. Below is a sample trace with dummy values:
ext4_ext_insert_extent
path = *ppath = 2000
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(ppath)
path = *ppath = 2000
if (depth > path[0].p_maxdepth)
kfree(path = 2000);
*ppath = path = NULL;
path = kcalloc() = 3000
*ppath = 3000;
return path;
/* here path is still 2000, UAF! */
eh = path[depth].p_hdr
==================================================================
BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330
Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179
CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866
Call Trace:
<TASK>
ext4_ext_insert_extent+0x26d4/0x3330
ext4_ext_map_blocks+0xe22/0x2d40
ext4_map_blocks+0x71e/0x1700
ext4_do_writepages+0x1290/0x2800
[...]
Allocated by task 179:
ext4_find_extent+0x81c/0x1f70
ext4_ext_map_blocks+0x146/0x2d40
ext4_map_blocks+0x71e/0x1700
ext4_do_writepages+0x1290/0x2800
ext4_writepages+0x26d/0x4e0
do_writepages+0x175/0x700
[...]
Freed by task 179:
kfree+0xcb/0x240
ext4_find_extent+0x7c0/0x1f70
ext4_ext_insert_extent+0xa26/0x3330
ext4_ext_map_blocks+0xe22/0x2d40
ext4_map_blocks+0x71e/0x1700
ext4_do_writepages+0x1290/0x2800
ext4_writepages+0x26d/0x4e0
do_writepages+0x175/0x700
[...]
==================================================================
So use *ppath to update the path to avoid the above problem.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
nbd: fix race between timeout and normal completion
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue.
|
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for accessing waker_bfqq after splitting
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
F ...
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for accessing waker_bfqq after splitting
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del()
The kref_put() function will call nport->release if the refcount drops to
zero. The nport->release release function is _efc_nport_free() which frees
"nport". But then we dereference "nport" on the next line which is a use
after free. Re-order these lines to avoid the use after free.
|
|
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08
Currently rsv_qp is freed before ib_unregister_device() is called
on HIP08. During the time interval, users can still dereg MR and
rsv_qp will be used in this process, leading to a UAF. Move the
release of rsv_qp after calling ib_unregister_device() to fix it.
|
In the Linux kernel, the following vulnerability has been resolved:
vhost_vdpa: assign irq bypass producer token correctly
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by s ...
In the Linux kernel, the following vulnerability has been resolved:
vhost_vdpa: assign irq bypass producer token correctly
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
...
In the Linux kernel, the following vulnerability has been resolved:
net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - inject error before stopping queue
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close ma ...
In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - inject error before stopping queue
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: always wait for both firmware loading attempts
In 'rtw_wait_firmware_completion()', always wait for both (regular and
wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()'
has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue
'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually
the wowlan one) is still in progress, causing UAF detected by KASAN.
|
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible UAF for bfqq->bic with merge chain
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3 ...
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible UAF for bfqq->bic with merge chain
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_requeue_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0x10d/0x610 mm/kasan/report.c:475
kasan_report+0x8e/0xc0 mm/kasan/report.c:588
bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757
bfq_init_rq block/bfq-iosched.c:6876 [inline]
bfq_insert_request block/bfq-iosched.c:6254 [inline]
bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304
blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593
blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
</TASK>
Allocated by task 20776:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3458 [inline]
kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503
ioc_create_icq block/blk-ioc.c:370 [inline]
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid OOB when system.data xattr changes underneath the filesystem
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change ...
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid OOB when system.data xattr changes underneath the filesystem
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change from 2048 to 2047
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103
CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697
__ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573
ext4_lookup_entry fs/ext4/namei.c:1727 [inline]
ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795
lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633
filename_create+0x297/0x540 fs/namei.c:3980
do_symlinkat+0xf9/0x3a0 fs/namei.c:4587
__do_sys_symlinkat fs/namei.c:4610 [inline]
__se_sys_symlinkat fs/namei.c:4607 [inline]
__x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3e73ced469
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a
RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469
RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0
RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290
R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c
R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0
</TASK>
Calling ext4_xattr_ibody_find right after reading the inode with
ext4_get_inode_loc will lead to a check of the validity of the xattrs,
avoiding this problem.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, ...
In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
The call trace is as below:
[ 125.350876][ T1430] Call Trace:
[ 125.356281][ T1430] <TASK>
[ 125.361285][ T1430] ? __warn (kernel/panic.c:693)
[ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219)
[ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239)
[ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
[ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970)
[ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151)
[ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm
[ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910)
[ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
[ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161)
[ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm
[ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma
[ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma
[ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231)
[ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393)
[ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339)
[ 125.531837][ T1430] kthread (kernel/kthread.c:389)
[ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147)
[ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
[ 125.566487][ T1430] </TASK>
[ 125.566488][ T1430] ---[ end trace 0000000000000000 ]---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: axg-card: fix 'use-after-free'
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: ...
In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: axg-card: fix 'use-after-free'
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x90
print_report+0xfc/0x5c0
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
platform_probe+0x8c/0xf4
really_probe+0x110/0x39c
__driver_probe_device+0xb8/0x18c
driver_probe_device+0x108/0x1d8
__driver_attach+0xd0/0x25c
bus_for_each_dev+0xe0/0x154
driver_attach+0x34/0x44
bus_add_driver+0x134/0x294
driver_register+0xa8/0x1e8
__platform_driver_register+0x44/0x54
axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
do_one_initcall+0xdc/0x25c
do_init_module+0x10c/0x334
load_module+0x24c4/0x26cc
init_module_from_file+0xd4/0x128
__arm64_sys_finit_module+0x1f4/0x41c
invoke_syscall+0x60/0x188
el0_svc_common.constprop.0+0x78/0x13c
do_el0_svc+0x30/0x40
el0_svc+0x38/0x78
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
sch/netem: fix use after free in netem_dequeue
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo u ...
In the Linux kernel, the following vulnerability has been resolved:
sch/netem: fix use after free in netem_dequeue
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in s ...
In the Linux kernel, the following vulnerability has been resolved:
ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
[ 52.047785] Call trace:
[ 52.047787] dump_backtrace+0x0/0x3c0
[ 52.047794] show_stack+0x34/0x50
[ 52.047797] dump_stack_lvl+0x68/0x8c
[ 52.047802] print_address_description.constprop.0+0x74/0x2c0
[ 52.047809] kasan_report+0x210/0x230
[ 52.047815] __asan_report_load1_noabort+0x3c/0x50
[ 52.047820] snd_pcm_suspend_all+0x1a8/0x270
[ 52.047824] snd_soc_suspend+0x19c/0x4e0
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ila: call nf_unregister_net_hooks() sooner
syzbot found an use-after-free Read in ila_nf_input [1]
Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().
It should be done in the reverse way, with a synchronize_rcu().
This is a good match for a pre_exit() method.
[1]
BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: use-after-free i ...
In the Linux kernel, the following vulnerability has been resolved:
ila: call nf_unregister_net_hooks() sooner
syzbot found an use-after-free Read in ila_nf_input [1]
Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().
It should be done in the reverse way, with a synchronize_rcu().
This is a good match for a pre_exit() method.
[1]
BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup include/linux/rhashtable.h:604 [inline]
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6108
__napi_poll+0xcb/0x490 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6963
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
prep_new_page mm/page_alloc.c:1501 [inline]
get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
__alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
__alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
__kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
__do_kmalloc_node mm/slub.c:4146 [inline]
__kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
__kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
bucket_table_alloc lib/rhashtable.c:186 [inline]
rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
ops_ini
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix missing cleanup on rollforward recovery error
In an error injection test of a routine for mount-time recovery, KASAN
found a use-after-free bug.
It turned out that if data recovery was performed using partial logs
created by dsync writes, but an error occurred before starting the log
writer to create a recovered checkpoint, the inodes whose data had been
recovered were left in the ns_dirty_files list of the nilfs ...
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix missing cleanup on rollforward recovery error
In an error injection test of a routine for mount-time recovery, KASAN
found a use-after-free bug.
It turned out that if data recovery was performed using partial logs
created by dsync writes, but an error occurred before starting the log
writer to create a recovered checkpoint, the inodes whose data had been
recovered were left in the ns_dirty_files list of the nilfs object and
were not freed.
Fix this issue by cleaning up inodes that have read the recovery data if
the recovery routine fails midway before the log writer starts.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: free driver_data after destroying hid device
HID driver callbacks aren't called anymore once hid_destroy_device() has
been called. Hence, hid driver_data should be freed only after the
hid_destroy_device() function returned as driver_data is used in several
callbacks.
I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling
KASAN to debug memory allocation, I got this output:
[ 13.050438] ==== ...
In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: free driver_data after destroying hid device
HID driver callbacks aren't called anymore once hid_destroy_device() has
been called. Hence, hid driver_data should be freed only after the
hid_destroy_device() function returned as driver_data is used in several
callbacks.
I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling
KASAN to debug memory allocation, I got this output:
[ 13.050438] ==================================================================
[ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh]
[ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3
[ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479
[ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0
[ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024
[ 13.067860] Call Trace:
[ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 13.071486] <TASK>
[ 13.071492] dump_stack_lvl+0x5d/0x80
[ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002)
[ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.082199] print_report+0x174/0x505
[ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.097464] kasan_report+0xc8/0x150
[ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082]
[ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0
[ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b]
[ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.150446] ? __devm_add_action+0x167/0x1d0
[ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.161814] platform_probe+0xa2/0x150
[ 13.165029] really_probe+0x1e3/0x8a0
[ 13.168243] __driver_probe_device+0x18c/0x370
[ 13.171500] driver_probe_device+0x4a/0x120
[ 13.175000] __driver_attach+0x190/0x4a0
[ 13.178521] ? __pfx___driver_attach+0x10/0x10
[ 13.181771] bus_for_each_dev+0x106/0x180
[ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10
[ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10
[ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.194382] bus_add_driver+0x29e/0x4d0
[ 13.197328] driver_register+0x1a5/0x360
[ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.203362] do_one_initcall+0xa7/0x380
[ 13.206432] ? __pfx_do_one_initcall+0x10/0x10
[ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.213211] ? kasan_unpoison+0x44/0x70
[ 13.216688] do_init_module+0x238/0x750
[ 13.2196
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF caused by offsets overwrite
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. H ...
In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF caused by offsets overwrite
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. However, at this point the
offsets used to index these objects are now corrupted.
Unwinding with corrupted offsets can result in decrements of arbitrary
nodes and lead to their premature release. Other users of such nodes are
left with a dangling pointer triggering a use-after-free. This issue is
made evident by the following KASAN report (trimmed):
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff47fc91598f04 by task binder-util/743
CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_free_buf+0x128/0x434
binder_thread_write+0x8a4/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Allocated by task 743:
__kmalloc_cache_noprof+0x110/0x270
binder_new_node+0x50/0x700
binder_transaction+0x413c/0x6da8
binder_thread_write+0x978/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Freed by task 745:
kfree+0xbc/0x208
binder_thread_read+0x1c5c/0x37d4
binder_ioctl+0x16d8/0x258c
[...]
==================================================================
To avoid this issue, let's check that the raw data copy is within the
boundaries of the data section.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove() ...
In the Linux kernel, the following vulnerability has been resolved:
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove().
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the ...
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the descriptors as first nodes were not
removed from the list.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: st: fix probed platform device ref count on probe error path
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
rel ...
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: st: fix probed platform device ref count on probe error path
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
releasing remaining devm-managed resources.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
netem: fix return value if duplicate enqueue fails
There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.
This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the ...
In the Linux kernel, the following vulnerability has been resolved:
netem: fix return value if duplicate enqueue fails
There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.
This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the parent during destruction, leaving a dangling pointer
for some classful qdiscs like DRR.
There are two ways for the bug happen:
- If the duplicated packet is dropped by rootq->enqueue() and then
the original packet is also dropped.
- If rootq->enqueue() sends the duplicated packet to a different qdisc
and the original packet is dropped.
In both cases NET_XMIT_SUCCESS is returned even though no packets
are enqueued at the netem qdisc.
The fix is to defer the enqueue of the duplicate packet until after
the original packet has been guaranteed to return NET_XMIT_SUCCESS.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
atm: idt77252: prevent use after free in dequeue_rx()
We can't dereference "skb" after calling vcc->push() because the skb
is released.
|
