| CVE |
Vendors |
Products |
Updated |
CVSS v2 |
CVSS v3 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix uaf in ath12k_core_init()
When the execution of ath12k_core_hw_group_assign() or
ath12k_core_hw_group_create() fails, the registered notifier chain is not
unregistered properly. Its memory is freed after rmmod, which may trigger
to a use-after-free (UAF) issue if there is a subsequent access to this
notifier chain.
Fixes the issue by calling ath12k_core_panic_notifier_unregister() in
failure cases.
Call tra ...
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix uaf in ath12k_core_init()
When the execution of ath12k_core_hw_group_assign() or
ath12k_core_hw_group_create() fails, the registered notifier chain is not
unregistered properly. Its memory is freed after rmmod, which may trigger
to a use-after-free (UAF) issue if there is a subsequent access to this
notifier chain.
Fixes the issue by calling ath12k_core_panic_notifier_unregister() in
failure cases.
Call trace:
notifier_chain_register+0x4c/0x1f0 (P)
atomic_notifier_chain_register+0x38/0x68
ath12k_core_init+0x50/0x4e8 [ath12k]
ath12k_pci_probe+0x5f8/0xc28 [ath12k]
pci_device_probe+0xbc/0x1a8
really_probe+0xc8/0x3a0
__driver_probe_device+0x84/0x1b0
driver_probe_device+0x44/0x130
__driver_attach+0xcc/0x208
bus_for_each_dev+0x84/0x100
driver_attach+0x2c/0x40
bus_add_driver+0x130/0x260
driver_register+0x70/0x138
__pci_register_driver+0x68/0x80
ath12k_pci_init+0x30/0x68 [ath12k]
ath12k_init+0x28/0x78 [ath12k]
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
This uses a mutex to protect from concurrent access of mgmt_pending
list which can cause crashes like:
==================================================================
BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318
CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 ...
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
This uses a mutex to protect from concurrent access of mgmt_pending
list which can cause crashes like:
==================================================================
BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318
CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
print_address_description+0xa8/0x254 mm/kasan/report.c:408
print_report+0x68/0x84 mm/kasan/report.c:521
kasan_report+0xb0/0x110 mm/kasan/report.c:634
__asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379
hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223
pending_find net/bluetooth/mgmt.c:947 [inline]
remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445
hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x25c/0x378 net/socket.c:1131
new_sync_write fs/read_write.c:591 [inline]
vfs_write+0x62c/0x97c fs/read_write.c:684
ksys_write+0x120/0x210 fs/read_write.c:736
__do_sys_write fs/read_write.c:747 [inline]
__se_sys_write fs/read_write.c:744 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:744
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 7037:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4327 [inline]
__kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198
sk_alloc+0x44/0x3ac net/core/sock.c:2254
bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148
hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202
bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132
__sock_create+0x43c/0x91c net/socket.c:1541
sock_create net/socket.c:1599 [inline]
__sys_socket_create net/socket.c:1636 [inline]
__sys_socket+0xd4/0x1c0 net/socket.c:1683
__do_sys_socket net/socket.c:1697 [inline]
__se_sys_socket net/socket.c:1695 [inline]
__arm64_sys_socket+0x7c/0x94 net/socket.c:1695
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Freed by task 6607:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x68/0x88 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline
---truncated---
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: Cancel outstanding rescan work when unregistering
It's possible to trigger use-after-free here by:
(a) forcing rescan_work_func() to take a long time and
(b) utilizing a pwrctrl driver that may be unloaded for some reason
Cancel outstanding work to ensure it is finished before we allow our data
structures to be cleaned up.
[bhelgaas: tidy commit log]
|
In the Linux kernel, the following vulnerability has been resolved:
dm: fix dm_blk_report_zones
If dm_get_live_table() returned NULL, dm_put_live_table() was never
called. Also, it is possible that md->zone_revalidate_map will change
while calling this function. Only read it once, so that we are always
using the same value. Otherwise we might miss a call to
dm_put_live_table().
Finally, while md->zone_revalidate_map is set and a process is calling
blk_revalidate_disk_zones() to set up the zon ...
In the Linux kernel, the following vulnerability has been resolved:
dm: fix dm_blk_report_zones
If dm_get_live_table() returned NULL, dm_put_live_table() was never
called. Also, it is possible that md->zone_revalidate_map will change
while calling this function. Only read it once, so that we are always
using the same value. Otherwise we might miss a call to
dm_put_live_table().
Finally, while md->zone_revalidate_map is set and a process is calling
blk_revalidate_disk_zones() to set up the zone append emulation
resources, it is possible that another process, perhaps triggered by
blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If
blk_revalidate_disk_zones() fails, these resources can be freed while
the other process is still using them, causing a use-after-free error.
blk_revalidate_disk_zones() will only ever be called when initially
setting up the zone append emulation resources, such as when setting up
a zoned dm-crypt table for the first time. Further table swaps will not
set md->zone_revalidate_map or call blk_revalidate_disk_zones().
However it must be called using the new table (referenced by
md->zone_revalidate_map) and the new queue limits while the DM device is
suspended. dm_blk_report_zones() needs some way to distinguish between a
call from blk_revalidate_disk_zones(), which must be allowed to use
md->zone_revalidate_map to access this not yet activated table, and all
other calls to dm_blk_report_zones(), which should not be allowed while
the device is suspended and cannot use md->zone_revalidate_map, since
the zone resources might be freed by the process currently calling
blk_revalidate_disk_zones().
Solve this by tracking the process that sets md->zone_revalidate_map in
dm_revalidate_zones() and only allowing that process to make use of it
in dm_blk_report_zones().
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
erofs: avoid using multiple devices with different type
For multiple devices, both primary and extra devices should be the
same type. `erofs_init_device` has already guaranteed that if the
primary is a file-backed device, extra devices should also be
regular files.
However, if the primary is a block device while the extra device
is a file-backed device, `erofs_init_device` will get an ENOTBLK,
which is not treated as an error ...
In the Linux kernel, the following vulnerability has been resolved:
erofs: avoid using multiple devices with different type
For multiple devices, both primary and extra devices should be the
same type. `erofs_init_device` has already guaranteed that if the
primary is a file-backed device, extra devices should also be
regular files.
However, if the primary is a block device while the extra device
is a file-backed device, `erofs_init_device` will get an ENOTBLK,
which is not treated as an error in `erofs_fc_get_tree`, and that
leads to an UAF:
erofs_fc_get_tree
get_tree_bdev_flags(erofs_fc_fill_super)
erofs_read_superblock
erofs_init_device // sbi->dif0 is not inited yet,
// return -ENOTBLK
deactivate_locked_super
free(sbi)
if (err is -ENOTBLK)
sbi->dif0.file = filp_open() // sbi UAF
So if -ENOTBLK is hitted in `erofs_init_device`, it means the
primary device must be a block device, and the extra device
is not a block device. The error can be converted to -EINVAL.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
binder: fix yet another UAF in binder_devices
Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices")
addressed a use-after-free where devices could be released without first
being removed from the binder_devices list. However, there is a similar
path in binder_free_proc() that was missed:
==================================================================
BUG: KASAN: slab-use-after-free in binder_remove_de ...
In the Linux kernel, the following vulnerability has been resolved:
binder: fix yet another UAF in binder_devices
Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices")
addressed a use-after-free where devices could be released without first
being removed from the binder_devices list. However, there is a similar
path in binder_free_proc() that was missed:
==================================================================
BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100
Write of size 8 at addr ffff0000c773b900 by task umount/467
CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_remove_device+0xd4/0x100
binderfs_evict_inode+0x230/0x2f0
evict+0x25c/0x5dc
iput+0x304/0x480
dentry_unlink_inode+0x208/0x46c
__dentry_kill+0x154/0x530
[...]
Allocated by task 463:
__kmalloc_cache_noprof+0x13c/0x324
binderfs_binder_device_create.isra.0+0x138/0xa60
binder_ctl_ioctl+0x1ac/0x230
[...]
Freed by task 215:
kfree+0x184/0x31c
binder_proc_dec_tmpref+0x33c/0x4ac
binder_deferred_func+0xc10/0x1108
process_one_work+0x520/0xba4
[...]
==================================================================
Call binder_remove_device() within binder_free_proc() to ensure the
device is removed from the binder_devices list before being kfreed.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
binder: fix use-after-free in binderfs_evict_inode()
Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled
kernel, I've noticed the following:
BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0
Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699
CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13
Hardware name: QEMU Standard PC (i440FX ...
In the Linux kernel, the following vulnerability has been resolved:
binder: fix use-after-free in binderfs_evict_inode()
Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled
kernel, I've noticed the following:
BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0
Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699
CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1c2/0x2a0
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __virt_addr_valid+0x18c/0x540
? __virt_addr_valid+0x469/0x540
print_report+0x155/0x840
? __virt_addr_valid+0x18c/0x540
? __virt_addr_valid+0x469/0x540
? __phys_addr+0xba/0x170
? binderfs_evict_inode+0x1de/0x2d0
kasan_report+0x147/0x180
? binderfs_evict_inode+0x1de/0x2d0
binderfs_evict_inode+0x1de/0x2d0
? __pfx_binderfs_evict_inode+0x10/0x10
evict+0x524/0x9f0
? __pfx_lock_release+0x10/0x10
? __pfx_evict+0x10/0x10
? do_raw_spin_unlock+0x4d/0x210
? _raw_spin_unlock+0x28/0x50
? iput+0x697/0x9b0
__dentry_kill+0x209/0x660
? shrink_kill+0x8d/0x2c0
shrink_kill+0xa9/0x2c0
shrink_dentry_list+0x2e0/0x5e0
shrink_dcache_parent+0xa2/0x2c0
? __pfx_shrink_dcache_parent+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
do_one_tree+0x23/0xe0
shrink_dcache_for_umount+0xa0/0x170
generic_shutdown_super+0x67/0x390
kill_litter_super+0x76/0xb0
binderfs_kill_super+0x44/0x90
deactivate_locked_super+0xb9/0x130
cleanup_mnt+0x422/0x4c0
? lockdep_hardirqs_on+0x9d/0x150
task_work_run+0x1d2/0x260
? __pfx_task_work_run+0x10/0x10
resume_user_mode_work+0x52/0x60
syscall_exit_to_user_mode+0x9a/0x120
do_syscall_64+0x103/0x210
? asm_sysvec_apic_timer_interrupt+0x1a/0x20
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0xcac57b
Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8
RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850
RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff
R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718
R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830
</TASK>
Allocated by task 1705:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x213/0x3e0
binderfs_binder_device_create+0x183/0xa80
binder_ctl_ioctl+0x138/0x190
__x64_sys_ioctl+0x120/0x1b0
do_syscall_64+0xf6/0x210
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1705:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x46/0x50
__kasan_slab_free+0x62/0x70
kfree+0x194/0x440
evict+0x524/0x9f0
do_unlinkat+0x390/0x5b0
__x64_sys_unlink+0x47/0x50
do_syscall_64+0xf6/0x210
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This 'stress-ng' workload causes the concurrent deletions from
'binder_devices' and so requires full-featured synchronization
to prevent list corruption.
I've found this issue independently but pretty sure that syzbot did
the same, so Reported-by: and Closes: should be applicable here as well.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem i ...
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/name
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix a use-after-free in r535_gsp_rpc_push()
The RPC container is released after being passed to r535_gsp_rpc_send().
When sending the initial fragment of a large RPC and passing the
caller's RPC container, the container will be freed prematurely. Subsequent
attempts to send remaining fragments will therefore result in a
use-after-free.
Allocate a temporary RPC container for holding the initial fragment of a
larg ...
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix a use-after-free in r535_gsp_rpc_push()
The RPC container is released after being passed to r535_gsp_rpc_send().
When sending the initial fragment of a large RPC and passing the
caller's RPC container, the container will be freed prematurely. Subsequent
attempts to send remaining fragments will therefore result in a
use-after-free.
Allocate a temporary RPC container for holding the initial fragment of a
large RPC when sending. Free the caller's container when all fragments
are successfully sent.
[ Rebase onto Blackwell changes. - Danilo ]
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk
Smatch detected a potential use-after-free of an ndlp oject in
dev_loss_tmo_callbk during driver unload or fatal error handling.
Fix by reordering code to avoid potential use-after-free if initial
nodelist reference has been previously removed.
|
|
Use-after-free in the WebRTC: Audio/Video component. This vulnerability affects Firefox < 145, Firefox ESR < 140.5, Thunderbird < 145, and Thunderbird < 140.5.
|
|
Use-after-free in the Audio/Video component. This vulnerability affects Firefox < 145, Firefox ESR < 140.5, Firefox ESR < 115.30, Thunderbird < 145, and Thunderbird < 140.5.
|
In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated
via devm_kzalloc() to store touch bar keyboard related data.
Later on if backlight_device_get_by_name() finds a backlight device
with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup
with appletb_inactivity_timer() and the timer is armed to run after
appletb_tb_dim_timeout (6 ...
In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated
via devm_kzalloc() to store touch bar keyboard related data.
Later on if backlight_device_get_by_name() finds a backlight device
with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup
with appletb_inactivity_timer() and the timer is armed to run after
appletb_tb_dim_timeout (60) seconds.
A use-after-free is triggered when failure occurs after the timer is
armed. This ultimately means probe failure occurs and as a result the
"struct appletb_kbd *kbd" which is device managed memory is freed.
After 60 seconds the timer will have expired and __run_timers will
attempt to access the timer (kbd->inactivity_timer) however the kdb
structure has been freed causing a use-after free.
[ 71.636938] ==================================================================
[ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890
[ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0
[ 71.637915]
[ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary)
[ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 71.637915] Call Trace:
[ 71.637915] <IRQ>
[ 71.637915] dump_stack_lvl+0x53/0x70
[ 71.637915] print_report+0xce/0x670
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] kasan_report+0xce/0x100
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] __run_timers+0x7ad/0x890
[ 71.637915] ? __pfx___run_timers+0x10/0x10
[ 71.637915] ? update_process_times+0xfc/0x190
[ 71.637915] ? __pfx_update_process_times+0x10/0x10
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 71.637915] run_timer_softirq+0x141/0x240
[ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10
[ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10
[ 71.637915] ? kvm_clock_get_cycles+0x18/0x30
[ 71.637915] ? ktime_get+0x60/0x140
[ 71.637915] handle_softirqs+0x1b8/0x5c0
[ 71.637915] ? __pfx_handle_softirqs+0x10/0x10
[ 71.637915] irq_exit_rcu+0xaf/0xe0
[ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80
[ 71.637915] </IRQ>
[ 71.637915]
[ 71.637915] Allocated by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] __kasan_kmalloc+0x8f/0xa0
[ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420
[ 71.637915] devm_kmalloc+0x74/0x1e0
[ 71.637915] appletb_kbd_probe+0x37/0x3c0
[ 71.637915] hid_device_probe+0x2d1/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
[ 71.637915]
[ 71.637915] Freed by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] kasan_save_free_info+0x3b/0x60
[ 71.637915] __kasan_slab_free+0x37/0x50
[ 71.637915] kfree+0xcf/0x360
[ 71.637915] devres_release_group+0x1f8/0x3c0
[ 71.637915] hid_device_probe+0x315/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
The root cause of the issue is that the timer is not disarmed
on failure paths leading to it remaining active and accessing
freed memory. To fix this call timer_delete_sync() to deactivate
the timer.
Another small issue is that timer_delete_sync is called
unconditionally in appletb_kbd_remove(), fix this by checking
for a valid kbd->backlight_dev before calling timer_delete_sync.
Show More
|
|
In bta_hf_client_cb_init of bta_hf_client_main.cc, there is a possible remote code execution due to a use after free. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
|
In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Acquire references on GEM handles for framebuffers
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An ...
In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Acquire references on GEM handles for framebuffers
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af06000 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag
Show More
|
|
Use after free in Microsoft Office allows an unauthorized attacker to execute code locally.
|
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not allow CHAIN_ID to refer to another table
When doing lookups for chains on the same batch by using its ID, a chain
from a different table can be used. If a rule is added to a table but
refers to a chain in a different table, it will be linked to the chain in
table2, but would have expressions referring to objects in table1.
Then, when table1 is removed, the rule will not be removed as its linked to ...
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not allow CHAIN_ID to refer to another table
When doing lookups for chains on the same batch by using its ID, a chain
from a different table can be used. If a rule is added to a table but
refers to a chain in a different table, it will be linked to the chain in
table2, but would have expressions referring to objects in table1.
Then, when table1 is removed, the rule will not be removed as its linked to
a chain in table2. When expressions in the rule are processed or removed,
that will lead to a use-after-free.
When looking for chains by ID, use the table that was used for the lookup
by name, and only return chains belonging to that same table.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not allow SET_ID to refer to another table
When doing lookups for sets on the same batch by using its ID, a set from a
different table can be used.
Then, when the table is removed, a reference to the set may be kept after
the set is freed, leading to a potential use-after-free.
When looking for sets by ID, use the table that was used for the lookup by
name, and only return sets belonging to that same ...
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not allow SET_ID to refer to another table
When doing lookups for sets on the same batch by using its ID, a set from a
different table can be used.
Then, when the table is removed, a reference to the set may be kept after
the set is freed, leading to a potential use-after-free.
When looking for sets by ID, use the table that was used for the lookup by
name, and only return sets belonging to that same table.
This fixes CVE-2022-2586, also reported as ZDI-CAN-17470.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
coresight: Clear the connection field properly
coresight devices track their connections (output connections) and
hold a reference to the fwnode. When a device goes away, we walk through
the devices on the coresight bus and make sure that the references
are dropped. This happens both ways:
a) For all output connections from the device, drop the reference to
the target device via coresight_release_platform_data()
b) Itera ...
In the Linux kernel, the following vulnerability has been resolved:
coresight: Clear the connection field properly
coresight devices track their connections (output connections) and
hold a reference to the fwnode. When a device goes away, we walk through
the devices on the coresight bus and make sure that the references
are dropped. This happens both ways:
a) For all output connections from the device, drop the reference to
the target device via coresight_release_platform_data()
b) Iterate over all the devices on the coresight bus and drop the
reference to fwnode if *this* device is the target of the output
connection, via coresight_remove_conns()->coresight_remove_match().
However, the coresight_remove_match() doesn't clear the fwnode field,
after dropping the reference, this causes use-after-free and
additional refcount drops on the fwnode.
e.g., if we have two devices, A and B, with a connection, A -> B.
If we remove B first, B would clear the reference on B, from A
via coresight_remove_match(). But when A is removed, it still has
a connection with fwnode still pointing to B. Thus it tries to drops
the reference in coresight_release_platform_data(), raising the bells
like :
[ 91.990153] ------------[ cut here ]------------
[ 91.990163] refcount_t: addition on 0; use-after-free.
[ 91.990212] WARNING: CPU: 0 PID: 461 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x144
[ 91.990260] Modules linked in: coresight_funnel coresight_replicator coresight_etm4x(-)
crct10dif_ce coresight ip_tables x_tables ipv6 [last unloaded: coresight_cpu_debug]
[ 91.990398] CPU: 0 PID: 461 Comm: rmmod Tainted: G W T 5.19.0-rc2+ #53
[ 91.990418] Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
[ 91.990434] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 91.990454] pc : refcount_warn_saturate+0xa0/0x144
[ 91.990476] lr : refcount_warn_saturate+0xa0/0x144
[ 91.990496] sp : ffff80000c843640
[ 91.990509] x29: ffff80000c843640 x28: ffff800009957c28 x27: ffff80000c8439a8
[ 91.990560] x26: ffff00097eff1990 x25: ffff8000092b6ad8 x24: ffff00097eff19a8
[ 91.990610] x23: ffff80000c8439a8 x22: 0000000000000000 x21: ffff80000c8439c2
[ 91.990659] x20: 0000000000000000 x19: ffff00097eff1a10 x18: ffff80000ab99c40
[ 91.990708] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80000abf6fa0
[ 91.990756] x14: 000000000000001d x13: 0a2e656572662d72 x12: 657466612d657375
[ 91.990805] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffff8000081aba28
[ 91.990854] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 746e756f63666572
[ 91.990903] x5 : ffff00097648ec58 x4 : 0000000000000000 x3 : 0000000000000027
[ 91.990952] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00080260ba00
[ 91.991000] Call trace:
[ 91.991012] refcount_warn_saturate+0xa0/0x144
[ 91.991034] kobject_get+0xac/0xb0
[ 91.991055] of_node_get+0x2c/0x40
[ 91.991076] of_fwnode_get+0x40/0x60
[ 91.991094] fwnode_handle_get+0x3c/0x60
[ 91.991116] fwnode_get_nth_parent+0xf4/0x110
[ 91.991137] fwnode_full_name_string+0x48/0xc0
[ 91.991158] device_node_string+0x41c/0x530
[ 91.991178] pointer+0x320/0x3ec
[ 91.991198] vsnprintf+0x23c/0x750
[ 91.991217] vprintk_store+0x104/0x4b0
[ 91.991238] vprintk_emit+0x8c/0x360
[ 91.991257] vprintk_default+0x44/0x50
[ 91.991276] vprintk+0xcc/0xf0
[ 91.991295] _printk+0x68/0x90
[ 91.991315] of_node_release+0x13c/0x14c
[ 91.991334] kobject_put+0x98/0x114
[ 91.991354] of_node_put+0x24/0x34
[ 91.991372] of_fwnode_put+0x40/0x5c
[ 91.991390] fwnode_handle_put+0x38/0x50
[ 91.991411] coresight_release_platform_data+0x74/0xb0 [coresight]
[ 91.991472] coresight_unregister+0x64/0xcc [coresight]
[ 91.991525] etm4_remove_dev+0x64/0x78 [coresight_etm4x]
[ 91.991563] etm4_remove_amba+0x1c/0x2c [coresight_etm4x]
[ 91.991598] amba_remove+0x3c/0x19c
---truncated---
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix KASAN use-after-free Read in compute_effective_progs
Syzbot found a Use After Free bug in compute_effective_progs().
The reproducer creates a number of BPF links, and causes a fault
injected alloc to fail, while calling bpf_link_detach on them.
Link detach triggers the link to be freed by bpf_link_free(),
which calls __cgroup_bpf_detach() and update_effective_progs().
If the memory allocation in this function fails, t ...
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix KASAN use-after-free Read in compute_effective_progs
Syzbot found a Use After Free bug in compute_effective_progs().
The reproducer creates a number of BPF links, and causes a fault
injected alloc to fail, while calling bpf_link_detach on them.
Link detach triggers the link to be freed by bpf_link_free(),
which calls __cgroup_bpf_detach() and update_effective_progs().
If the memory allocation in this function fails, the function restores
the pointer to the bpf_cgroup_link on the cgroup list, but the memory
gets freed just after it returns. After this, every subsequent call to
update_effective_progs() causes this already deallocated pointer to be
dereferenced in prog_list_length(), and triggers KASAN UAF error.
To fix this issue don't preserve the pointer to the prog or link in the
list, but remove it and replace it with a dummy prog without shrinking
the table. The subsequent call to __cgroup_bpf_detach() or
__cgroup_bpf_detach() will correct it.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
usbnet: Fix linkwatch use-after-free on disconnect
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep. On disconnect, completion of the work was originally awaited in
->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":
https://git.kernel.org/tglx/history/c/0f138bbfd83c
The change was made because back then, the ker ...
In the Linux kernel, the following vulnerability has been resolved:
usbnet: Fix linkwatch use-after-free on disconnect
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep. On disconnect, completion of the work was originally awaited in
->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":
https://git.kernel.org/tglx/history/c/0f138bbfd83c
The change was made because back then, the kernel's workqueue
implementation did not allow waiting for a single work. One had to wait
for completion of *all* work by calling flush_scheduled_work(), and that
could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex
held in ->ndo_stop().
The commit solved one problem but created another: It causes a
use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c,
ax88179_178a.c, ch9200.c and smsc75xx.c:
* If the drivers receive a link change interrupt immediately before
disconnect, they raise EVENT_LINK_RESET in their (non-sleepable)
->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback,
which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().
Because usbnet_deferred_kevent() is awaited after unregister_netdev(),
netif_carrier_{on,off}() may operate on an unregistered netdev and
linkwatch_event() may run after free_netdev(), causing a use-after-free.
In 2010, usbnet was changed to only wait for a single instance of
usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf
("drivers/net: don't use flush_scheduled_work()").
Unfortunately the commit neglected to move the wait back to
->ndo_stop(). Rectify that omission at long last.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix a UAF bug on the error path of probing
When the driver fails in snd_card_register() at probe time, it will free
the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug.
The following log can reveal it:
[ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
[ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0
[ 50.729530] Call Tra ...
In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix a UAF bug on the error path of probing
When the driver fails in snd_card_register() at probe time, it will free
the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug.
The following log can reveal it:
[ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
[ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0
[ 50.729530] Call Trace:
[ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
Fix this by adding usb_kill_urb() before usb_free_urb().
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix use-after-free in taprio_dev_notifier
Since taprio’s taprio_dev_notifier() isn’t protected by an
RCU read-side critical section, a race with advance_sched()
can lead to a use-after-free.
Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.
|
|
In the Linux kernel, the following vulnerability has been resolved:
spi: Fix simplification of devm_spi_register_controller
This reverts commit 59ebbe40fb51 ("spi: simplify
devm_spi_register_controller").
If devm_add_action() fails in devm_add_action_or_reset(),
devm_spi_unregister() will be called, it decreases the
refcount of 'ctlr->dev' to 0, then it will cause uaf in
the drivers that calling spi_put_controller() in error path.
|
|
In the Linux kernel, the following vulnerability has been resolved:
spi: tegra20-slink: fix UAF in tegra_slink_remove()
After calling spi_unregister_master(), the refcount of master will
be decrease to 0, and it will be freed in spi_controller_release(),
the device data also will be freed, so it will lead a UAF when using
'tspi'. To fix this, get the master before unregister and put it when
finish using it.
|
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
Running IDXD workloads in a container with the /dev directory mounted can
trigger a call trace or even a kernel panic when the parent process of the
container is terminated.
This issue occurs because, under certain configurations, Docker does not
properly propagate the mount replica back to the original mount point.
In this case, when t ...
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
Running IDXD workloads in a container with the /dev directory mounted can
trigger a call trace or even a kernel panic when the parent process of the
container is terminated.
This issue occurs because, under certain configurations, Docker does not
properly propagate the mount replica back to the original mount point.
In this case, when the user driver detaches, the WQ is destroyed but it
still calls destroy_workqueue() attempting to completes all pending work.
It's necessary to check wq->wq and skip the drain if it no longer exists.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix potential use-after-free in airoha_npu_get()
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the ...
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix potential use-after-free in airoha_npu_get()
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the error and success cases
are handled appropriately, preventing potential resource issues.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix a use-after-free
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct sr ...
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix a use-after-free
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct srpt_port_id (controlled by LIO).
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
Read of size 8 at addr ffff888141cc34b8 by task check/5093
Call Trace:
<TASK>
show_stack+0x4e/0x53
dump_stack_lvl+0x51/0x66
print_address_description.constprop.0.cold+0xea/0x41e
print_report.cold+0x90/0x205
kasan_report+0xb9/0xf0
__asan_load8+0x69/0x90
srpt_enable_tpg+0x31/0x70 [ib_srpt]
target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod]
configfs_write_iter+0x18b/0x210
new_sync_write+0x1f2/0x2f0
vfs_write+0x3e3/0x540
ksys_write+0xbb/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix a window for use-after-free
During a destroy CQ an interrupt may cause processing of a CQE after CQ
resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call
to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is
called under the cq_lock.
|
In the Linux kernel, the following vulnerability has been resolved:
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that ...
In the Linux kernel, the following vulnerability has been resolved:
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[[email protected]: v3]
Show More
|
|
A use-after-free vulnerability was discovered in Adobe Flash Player before 28.0.0.161. This vulnerability occurs due to a dangling pointer in the Primetime SDK related to media player handling of listener objects. A successful attack can lead to arbitrary code execution. This was exploited in the wild in January and February 2018.
|
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: remove tag set when second admin queue config fails
Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure
concatenation") modified nvme_tcp_setup_ctrl() to call
nvme_tcp_configure_admin_queue() twice. The first call prepares for
DH-CHAP negotitation, and the second call is required for secure
concatenation. However, this change triggered BUG KASAN slab-use-after-
free in blk_mq_queue_tag_busy_iter(). ...
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: remove tag set when second admin queue config fails
Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure
concatenation") modified nvme_tcp_setup_ctrl() to call
nvme_tcp_configure_admin_queue() twice. The first call prepares for
DH-CHAP negotitation, and the second call is required for secure
concatenation. However, this change triggered BUG KASAN slab-use-after-
free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by
repeating the blktests test case nvme/063 a few times [1].
When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain
below:
nvme_tcp_create_ctrl()
nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set
nvme_tcp_setup_ctrl() new=true
nvme_tcp_configure_admin_queue() new=true ... Succeed
nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set
nvme_stop_keep_alive()
nvme_tcp_teardown_admin_queue() remove=false
nvme_tcp_configure_admin_queue() new=false
nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set()
nvme_uninit_ctrl()
nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set
The first call of nvme_tcp_configure_admin_queue() succeeds with
new=true argument. The second call fails with new=false argument. This
second call does not call nvme_remove_admin_tag_set() on failure, due to
the new=false argument. Then the admin tag set is not removed. However,
nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call
nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which
has admin_tag_set field. Later on, the timeout handler accesses the
admin_tag_set field and causes the BUG KASAN slab-use-after-free.
To not leave the admin tag set, call nvme_remove_admin_tag_set() when
the second nvme_tcp_configure_admin_queue() call fails. Do not return
from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin"
go-to label to call nvme_tcp_teardown_admin_queue() which calls
nvme_remove_admin_tag_set().
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
smb: client: guarantee refcounted children from parent session
Avoid potential use-after-free bugs when walking DFS referrals,
mounting and performing DFS failover by ensuring that all children
from parent @tcon->ses are also refcounted. They're all needed across
the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at
it, too.
|
|
Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n"
|
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI
If lpfc_issue_els_flogi() fails and returns non-zero status, the node
reference count is decremented to trigger the release of the nodelist
structure. However, if there is a prior registration or dev-loss-evt work
pending, the node may be released prematurely. When dev-loss-evt
completes, the released node is referenced causing a use-after-free nu ...
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI
If lpfc_issue_els_flogi() fails and returns non-zero status, the node
reference count is decremented to trigger the release of the nodelist
structure. However, if there is a prior registration or dev-loss-evt work
pending, the node may be released prematurely. When dev-loss-evt
completes, the released node is referenced causing a use-after-free null
pointer dereference.
Similarly, when processing non-zero ELS PLOGI completion status in
lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport
registration before triggering node removal. If dev-loss-evt work is
pending, the node may be released prematurely and a subsequent call to
lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference.
Add test for pending dev-loss before decrementing the node reference count
for FLOGI, PLOGI, PRLI, and ADISC handling.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Cor ...
In the Linux kernel, the following vulnerability has been resolved:
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020
[ 718.223418] Call Trace:
[ 718.227139]
[ 718.230783] dump_stack_lvl+0x33/0x42
[ 718.234431] print_address_description.constprop.9+0x21/0x170
[ 718.238177] ? free_irq_cpu_rmap+0x53/0x80
[ 718.241885] ? free_irq_cpu_rmap+0x53/0x80
[ 718.245539] kasan_report.cold.18+0x7f/0x11b
[ 718.249197] ? free_irq_cpu_rmap+0x53/0x80
[ 718.252852] free_irq_cpu_rmap+0x53/0x80
[ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice]
[ 718.260174] ice_remove_arfs+0x5f/0x70 [ice]
[ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice]
[ 718.267419] ice_rebuild+0x39c/0xb60 [ice]
[ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice]
[ 718.278033] ? delay_tsc+0x4a/0xb0
[ 718.281513] ? preempt_count_sub+0x14/0xc0
[ 718.284984] ? delay_tsc+0x8f/0xb0
[ 718.288463] ice_do_reset+0x92/0xf0 [ice]
[ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice]
[ 718.295561] pci_reset_function+0x53/0x80
<...>
[ 718.393035] Allocated by task 690:
[ 718.433497] Freed by task 20834:
[ 718.495688] Last potentially related work creation:
[ 718.568966] The buggy address belongs to the object at ffff8881bd127e00
which belongs to the cache kmalloc-96 of size 96
[ 718.574085] The buggy address is located 0 bytes inside of
96-byte region [ffff8881bd127e00, ffff8881bd127e60)
[ 718.579265] The buggy address belongs to the page:
[ 718.598905] Memory state around the buggy address:
[ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.610811] ^
[ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
This is due to that free_irq_cpu_rmap() is always being called
*after* (devm_)free_irq() and thus it tries to work with IRQ descs
already freed. For example, on device reset the driver frees the
rmap right before allocating a new one (the splat above).
Make rmap creation and freeing function symmetrical with
{request,free}_irq() calls i.e. do that on ifup/ifdown instead
of device probe/remove/resume. These operations can be performed
independently from the actual device aRFS configuration.
Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers
only when aRFS is disabled -- otherwise, CPU rmap sets and clears
its own and they must not be touched manually.
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
eventpoll: don't decrement ep refcount while still holding the ep mutex
Jann Horn points out that epoll is decrementing the ep refcount and then
doing a
mutex_unlock(&ep->mtx);
afterwards. That's very wrong, because it can lead to a use-after-free.
That pattern is actually fine for the very last reference, because the
code in question will delay the actual call to "ep_free(ep)" until after
it has unlocked the mutex.
Bu ...
In the Linux kernel, the following vulnerability has been resolved:
eventpoll: don't decrement ep refcount while still holding the ep mutex
Jann Horn points out that epoll is decrementing the ep refcount and then
doing a
mutex_unlock(&ep->mtx);
afterwards. That's very wrong, because it can lead to a use-after-free.
That pattern is actually fine for the very last reference, because the
code in question will delay the actual call to "ep_free(ep)" until after
it has unlocked the mutex.
But it's wrong for the much subtler "next to last" case when somebody
*else* may also be dropping their reference and free the ep while we're
still using the mutex.
Note that this is true even if that other user is also using the same ep
mutex: mutexes, unlike spinlocks, can not be used for object ownership,
even if they guarantee mutual exclusion.
A mutex "unlock" operation is not atomic, and as one user is still
accessing the mutex as part of unlocking it, another user can come in
and get the now released mutex and free the data structure while the
first user is still cleaning up.
See our mutex documentation in Documentation/locking/mutex-design.rst,
in particular the section [1] about semantics:
"mutex_unlock() may access the mutex structure even after it has
internally released the lock already - so it's not safe for
another context to acquire the mutex and assume that the
mutex_unlock() context is not using the structure anymore"
So if we drop our ep ref before the mutex unlock, but we weren't the
last one, we may then unlock the mutex, another user comes in, drops
_their_ reference and releases the 'ep' as it now has no users - all
while the mutex_unlock() is still accessing it.
Fix this by simply moving the ep refcount dropping to outside the mutex:
the refcount itself is atomic, and doesn't need mutex protection (that's
the whole _point_ of refcounts: unlike mutexes, they are inherently
about object lifetimes).
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
Fault inject on pool metadata device reports:
BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950
CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trac ...
In the Linux kernel, the following vulnerability has been resolved:
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
Fault inject on pool metadata device reports:
BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950
CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xeb/0x3f4
kasan_report.cold+0xe6/0x147
dm_pool_register_metadata_threshold+0x40/0x80
pool_ctr+0xa0a/0x1150
dm_table_add_target+0x2c8/0x640
table_load+0x1fd/0x430
ctl_ioctl+0x2c4/0x5a0
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb3/0xd0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This can be easily reproduced using:
echo offline > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"
If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).
Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".
Show More
|
In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.
When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.
That means t ...
In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.
When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.
That means that armed timers won't be disarmed, that is, they won't be
removed from the timerqueue_list. exit_itimers will still release their
memory, and when that list is later processed, it leads to a
use-after-free.
Clean up the timers from the de-threaded task before freeing them. This
prevents a reported use-after-free.
Show More
|
|
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails.
|
