Vulnerabilities (CVE)

A vulnerability was found in Dataease SQLBot up to 1.5.1. This impacts the function validateEmbedded of the file backend/apps/system/middleware/auth.py of the component JWT Token Handler. Performing a manipulation results in improper verification of cryptographic signature. The attack can be initiated remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been made public and could be used. A comment in the source code warns users ... A vulnerability was found in Dataease SQLBot up to 1.5.1. This impacts the function validateEmbedded of the file backend/apps/system/middleware/auth.py of the component JWT Token Handler. Performing a manipulation results in improper verification of cryptographic signature. The attack can be initiated remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been made public and could be used. A comment in the source code warns users about using this feature. The vendor was contacted early about this disclosure.

Show More

pac4j-jwt versions prior to 4.5.9, 5.7.9, and 6.3.3 contain an authentication bypass vulnerability in JwtAuthenticator when processing encrypted JWTs that allows remote attackers to forge authentication tokens. Attackers who possess the server's RSA public key can create a JWE-wrapped PlainJWT with arbitrary subject and role claims, bypassing signature verification to authenticate as any user including administrators.

Bluetooth firmware or operating system software drivers in macOS versions before 10.13, High Sierra and iOS versions before 11.4, and Android versions before the 2018-06-05 patch may not sufficiently validate elliptic curve parameters used to generate public keys during a Diffie-Hellman key exchange, which may allow a remote attacker to obtain the encryption key used by the device.

SEPPmail Secure Email Gateway before version 15.0.1 does not properly verify that a PGP signature was generated by the expected key, allowing signature spoofing.

SEPPmail Secure Email Gateway before version 15.0.1 does not properly communicate PGP signature verification results, leaving users unable to detect forged emails.

A flaw was found in Keycloak’s WebAuthn registration component. This vulnerability allows an attacker to bypass the configured attestation policy and register untrusted or forged authenticators via submission of an attestation object with fmt: "none", even when the realm is configured to require direct attestation. This can lead to weakened authentication integrity and unauthorized authenticator registration.

Improper signature validation in PKCS7_verify() in AWS-LC allows an unauthenticated user to bypass signature verification when processing PKCS7 objects with Authenticated Attributes. Customers of AWS services do not need to take action. Applications using AWS-LC should upgrade to AWS-LC version 1.69.0.

Fleet is open source device management software. In versions prior to 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3, a vulnerability in Fleet's Windows MDM enrollment flow could allow an attacker to submit forged authentication tokens that are not properly validated. Because JWT signatures were not verified, Fleet could accept attacker-controlled identity claims, enabling enrollment of unauthorized devices under arbitrary Azure AD user identities. Versions 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3 ... Fleet is open source device management software. In versions prior to 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3, a vulnerability in Fleet's Windows MDM enrollment flow could allow an attacker to submit forged authentication tokens that are not properly validated. Because JWT signatures were not verified, Fleet could accept attacker-controlled identity claims, enabling enrollment of unauthorized devices under arbitrary Azure AD user identities. Versions 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3 fix the issue. If an immediate upgrade is not possible, affected Fleet users should temporarily disable Windows MDM.

Show More

Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public expon ... Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract.

Show More

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image.

sm-crypto provides JavaScript implementations of the Chinese cryptographic algorithms SM2, SM3, and SM4. A signature malleability vulnerability exists in the SM2 signature verification logic of the sm-crypto library prior to version 0.3.14. An attacker can derive a new valid signature for a previously signed message from an existing signature. Version 0.3.14 patches the issue.

sm-crypto provides JavaScript implementations of the Chinese cryptographic algorithms SM2, SM3, and SM4. A signature forgery vulnerability exists in the SM2 signature verification logic of sm-crypto prior to version 0.4.0. Under default configurations, an attacker can forge valid signatures for arbitrary public keys. If the message space contains sufficient redundancy, the attacker can fix the prefix of the message associated with the forged signature to satisfy specific formatting requirements. ... sm-crypto provides JavaScript implementations of the Chinese cryptographic algorithms SM2, SM3, and SM4. A signature forgery vulnerability exists in the SM2 signature verification logic of sm-crypto prior to version 0.4.0. Under default configurations, an attacker can forge valid signatures for arbitrary public keys. If the message space contains sufficient redundancy, the attacker can fix the prefix of the message associated with the forged signature to satisfy specific formatting requirements. Version 0.4.0 patches the issue.

Show More

A spoofing vulnerability exists when Windows incorrectly validates file signatures. An attacker who successfully exploited this vulnerability could bypass security features and load improperly signed files. In an attack scenario, an attacker could bypass security features intended to prevent improperly signed files from being loaded. The update addresses the vulnerability by correcting how Windows validates file signatures.

A vulnerability was detected in Cesanta Mongoose up to 7.20. This impacts the function mg_chacha20_poly1305_decrypt of the file /src/tls_chacha20.c of the component Poly1305 Authentication Tag Handler. The manipulation results in improper verification of cryptographic signature. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit is now public and may be used. The vendor was contacted early about this discl ... A vulnerability was detected in Cesanta Mongoose up to 7.20. This impacts the function mg_chacha20_poly1305_decrypt of the file /src/tls_chacha20.c of the component Poly1305 Authentication Tag Handler. The manipulation results in improper verification of cryptographic signature. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Show More

<p>A spoofing vulnerability exists when Windows incorrectly validates file signatures. An attacker who successfully exploited this vulnerability could bypass security features and load improperly signed files.</p> <p>In an attack scenario, an attacker could bypass security features intended to prevent improperly signed files from being loaded.</p> <p>The update addresses the vulnerability by correcting how Windows validates file signatures.</p>

authentik is an open-source identity provider. Prior to 2025.8.6, 2025.10.4, and 2025.12.4, when using a SAML Source that has the option Verify Assertion Signature under Verification Certificate enabled and not Verify Response Signature, or does not have the Encryption Certificate setting under Advanced Protocol settings configured, it was possible for an attacker to inject a malicious assertion before the signed assertion that authentik would use instead. authentik 2025.8.6, 2025.10.4, and 2025 ... authentik is an open-source identity provider. Prior to 2025.8.6, 2025.10.4, and 2025.12.4, when using a SAML Source that has the option Verify Assertion Signature under Verification Certificate enabled and not Verify Response Signature, or does not have the Encryption Certificate setting under Advanced Protocol settings configured, it was possible for an attacker to inject a malicious assertion before the signed assertion that authentik would use instead. authentik 2025.8.6, 2025.10.4, and 2025.12.4 fix this issue.

Show More

The system suffers from the absence of a kernel module signature verification. If an attacker can execute commands on behalf of root user (due to additional vulnerabilities), then he/she is also able to load custom kernel modules to the kernel space and execute code in the kernel context. Such a flaw can lead to taking control over the entire system. First identified on Nissan Leaf ZE1 manufactured in 2020.

Nebula is a scalable overlay networking tool. In versions from 1.7.0 to 1.10.2, when using P256 certificates (which is not the default configuration), it is possible to evade a blocklist entry created against the fingerprint of a certificate by using ECDSA Signature Malleability to use a copy of the certificate with a different fingerprint. This issue has been patched in version 1.10.3.

A fallback mechanism in code sign checking on macOS may allow arbitrary code execution. This issue affects Zscaler Client Connector on MacOS prior to 4.2.

SAP NetWeaver Application Server ABAP and ABAP Platform allows an authenticated attacker with normal privileges to obtain a valid signed message and send modified signed XML documents to the verifier. This may result in acceptance of tampered identity information, unauthorized access to sensitive user data and potential disruption of normal system usage.

go-tuf is a Go implementation of The Update Framework (TUF). Starting in version 2.0.0 and prior to version 2.3.1, a compromised or misconfigured TUF repository can have the configured value of signature thresholds set to 0, which effectively disables signature verification. This can lead to unauthorized modification to TUF metadata files is possible at rest, or during transit as no integrity checks are made. Version 2.3.1 fixes the issue. As a workaround, always make sure that the TUF metadata ... go-tuf is a Go implementation of The Update Framework (TUF). Starting in version 2.0.0 and prior to version 2.3.1, a compromised or misconfigured TUF repository can have the configured value of signature thresholds set to 0, which effectively disables signature verification. This can lead to unauthorized modification to TUF metadata files is possible at rest, or during transit as no integrity checks are made. Version 2.3.1 fixes the issue. As a workaround, always make sure that the TUF metadata roles are configured with a threshold of at least 1.

Show More

Evervault is a payment security solution. A vulnerability was identified in the `evervault-go` SDK’s attestation verification logic in versions of `evervault-go` prior to 1.3.2 that may allow incomplete documents to pass validation. This may cause the client to trust an enclave operator that does not meet expected integrity guarantees. The exploitability of this issue is limited in Evervault-hosted environments as an attacker would require the pre-requisite ability to serve requests from specifi ... Evervault is a payment security solution. A vulnerability was identified in the `evervault-go` SDK’s attestation verification logic in versions of `evervault-go` prior to 1.3.2 that may allow incomplete documents to pass validation. This may cause the client to trust an enclave operator that does not meet expected integrity guarantees. The exploitability of this issue is limited in Evervault-hosted environments as an attacker would require the pre-requisite ability to serve requests from specific evervault domain names, following from our ACME challenge based TLS certificate acquisition pipeline. The vulnerability primarily affects applications which only check PCR8. Though the efficacy is also reduced for applications that check all PCR values, the impact is largely remediated by checking PCR 0, 1 and 2. The identified issue has been addressed in version 1.3.2 by validating attestation documents before storing in the cache, and replacing the naive equality checks with a new SatisfiedBy check. Those who useevervault-go to attest Enclaves that are hosted outside of Evervault environments and cannot upgrade have two possible workarounds available. Modify the application logic to fail verification if PCR8 is not explicitly present and non-empty and/or add custom pre-validation to reject documents that omit any required PCRs.

Show More

A flaw was found in Keycloak. An attacker can exploit this vulnerability by modifying the organization ID and target email within a legitimate invitation token's JSON Web Token (JWT) payload. This lack of cryptographic signature verification allows the attacker to successfully self-register into an unauthorized organization, leading to unauthorized access.

Rapid7 InsightVM versions before 8.34.0 contain a signature verification issue on the Assertion Consumer Service (ACS) cloud endpoint that could allow an attacker to gain unauthorized access to InsightVM accounts setup via "Security Console" installations, resulting in full account takeover. The issue occurs due to the application processing these unsigned assertions and issuing session cookies that granted access to the targeted user accounts. This has been fixed in version 8.34.0 of InsightVM.

Issue summary: The 'openssl dgst' command-line tool silently truncates input data to 16MB when using one-shot signing algorithms and reports success instead of an error. Impact summary: A user signing or verifying files larger than 16MB with one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire file is authenticated while trailing data beyond 16MB remains unauthenticated. When the 'openssl dgst' command is used with algorithms that only support one-shot signing (Ed2551 ... Issue summary: The 'openssl dgst' command-line tool silently truncates input data to 16MB when using one-shot signing algorithms and reports success instead of an error. Impact summary: A user signing or verifying files larger than 16MB with one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire file is authenticated while trailing data beyond 16MB remains unauthenticated. When the 'openssl dgst' command is used with algorithms that only support one-shot signing (Ed25519, Ed448, ML-DSA-44, ML-DSA-65, ML-DSA-87), the input is buffered with a 16MB limit. If the input exceeds this limit, the tool silently truncates to the first 16MB and continues without signaling an error, contrary to what the documentation states. This creates an integrity gap where trailing bytes can be modified without detection if both signing and verification are performed using the same affected codepath. The issue affects only the command-line tool behavior. Verifiers that process the full message using library APIs will reject the signature, so the risk primarily affects workflows that both sign and verify with the affected 'openssl dgst' command. Streaming digest algorithms for 'openssl dgst' and library users are unaffected. The FIPS modules in 3.5 and 3.6 are not affected by this issue, as the command-line tools are outside the OpenSSL FIPS module boundary. OpenSSL 3.5 and 3.6 are vulnerable to this issue. OpenSSL 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.

Show More

The ML-DSA crate is a Rust implementation of the Module-Lattice-Based Digital Signature Standard (ML-DSA). Starting in version 0.0.4 and prior to version 0.1.0-rc.4, the ML-DSA signature verification implementation in the RustCrypto `ml-dsa` crate incorrectly accepts signatures with repeated (duplicate) hint indices. According to the ML-DSA specification (FIPS 204 / RFC 9881), hint indices within each polynomial must be **strictly increasing**. The current implementation uses a non-strict monoto ... The ML-DSA crate is a Rust implementation of the Module-Lattice-Based Digital Signature Standard (ML-DSA). Starting in version 0.0.4 and prior to version 0.1.0-rc.4, the ML-DSA signature verification implementation in the RustCrypto `ml-dsa` crate incorrectly accepts signatures with repeated (duplicate) hint indices. According to the ML-DSA specification (FIPS 204 / RFC 9881), hint indices within each polynomial must be **strictly increasing**. The current implementation uses a non-strict monotonic check (`<=` instead of `<`), allowing duplicate indices. This is a regression bug. The original implementation was correct, but a commit in version 0.0.4 inadvertently changed the strict `<` comparison to `<=`, introducing the vulnerability. Version 0.1.0-rc.4 fixes the issue.

Show More

Vulnerable cross-model authorization in juju. If a charm's cross-model permissions are revoked or expire, a malicious user who is able to update database records can mint an invalid macaroon that is incorrectly validated by the juju controller, enabling a charm to maintain otherwise revoked or expired permissions. This allows a charm to continue relating to another charm in a cross-model relation, and use their workload without their permission. No fix is available as of the time of writing.

Improper Verification of Cryptographic Signature vulnerability in Drupal Drupal Commerce Paybox Commerce Paybox on Drupal 7.X allows Authentication Bypass.This issue affects Drupal Commerce Paybox: from 7-x-1.0 through 7.X-1.5.

Some Honor products are affected by signature management vulnerability, successful exploitation could cause the forged system file overwrite the correct system file

Some Honor products are affected by signature management vulnerability, successful exploitation could cause the forged system file overwrite the correct system file

dcap-qvl implements the quote verification logic for DCAP (Data Center Attestation Primitives). A vulnerability present in versions prior to 0.3.9 involves a critical gap in the cryptographic verification process within the dcap-qvl. The library fetches QE Identity collateral (including qe_identity, qe_identity_signature, and qe_identity_issuer_chain) from the PCCS. However, it skips to verify the QE Identity signature against its certificate chain and does not enforce policy constraints on the ... dcap-qvl implements the quote verification logic for DCAP (Data Center Attestation Primitives). A vulnerability present in versions prior to 0.3.9 involves a critical gap in the cryptographic verification process within the dcap-qvl. The library fetches QE Identity collateral (including qe_identity, qe_identity_signature, and qe_identity_issuer_chain) from the PCCS. However, it skips to verify the QE Identity signature against its certificate chain and does not enforce policy constraints on the QE Report. An attacker can forge the QE Identity data to whitelist a malicious or non-Intel Quoting Enclave. This allows the attacker to forge the QE and sign untrusted quotes that the verifier will accept as valid. Effectively, this bypasses the entire remote attestation security model, as the verifier can no longer trust the entity responsible for signing the quotes. All deployments utilizing the dcap-qvl library for SGX or TDX quote verification are affected. The vulnerability has been patched in dcap-qvl version 0.3.9. The fix implements the missing cryptographic verification for the QE Identity signature and enforces the required checks for MRSIGNER, ISVPRODID, and ISVSVN against the QE Report. Users of the `@phala/dcap-qvl-node` and `@phala/dcap-qvl-web` packages should switch to the pure JavaScript implementation, `@phala/dcap-qvl`. There are no known workarounds for this vulnerability. Users must upgrade to the patched version to ensure that QE Identity collateral is properly verified.

Show More

Improper Verification of Cryptographic Signature vulnerability in liuyueyi quick-media (plugins/svg-plugin/batik-codec-fix/src/main/java/org/apache/batik/ext/awt/image/codec/util modules). This vulnerability is associated with program files SeekableOutputStream.Java. This issue affects quick-media: before v1.0.

IBM ApplinX 11.1 is vulnerable due to a privilege escalation vulnerability due to improper verification of JWT tokens. An attacker may be able to craft or modify a JSON web token in order to impersonate another user or to elevate their privileges.

The AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. Users who use IAM OIDC custom resource provider package will download CA Thumbprints as part of the custom resource workflow. However, the current `tls.connect` method will always set `rejectUnauthorized: false` which is a potential security concern. CDK should follow the best practice and set `rejectUnauthorized: true`. Howe ... The AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. Users who use IAM OIDC custom resource provider package will download CA Thumbprints as part of the custom resource workflow. However, the current `tls.connect` method will always set `rejectUnauthorized: false` which is a potential security concern. CDK should follow the best practice and set `rejectUnauthorized: true`. However, this could be a breaking change for existing CDK applications and we should fix this with a feature flag. Note that this is marked as low severity Security advisory because the issuer url is provided by CDK users who define the CDK application. If they insist on connecting to a unauthorized OIDC provider, CDK should not disallow this. Additionally, the code block is run in a Lambda environment which mitigate the MITM attack. The patch is in progress. To mitigate, upgrade to CDK v2.177.0 (Expected release date 2025-02-22). Once upgraded, users should make sure the feature flag '@aws-cdk/aws-iam:oidcRejectUnauthorizedConnections' is set to true in `cdk.context.json` or `cdk.json`. There are no known workarounds for this vulnerability.

Show More

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, the code doesn't validate that the JWT header specifies "alg":"RS256". This vulnerability is fixed in 2.2.

Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.11.4, there is a flaw in Hono’s JWK/JWKS JWT verification middleware allowed the JWT header’s alg value to influence signature verification when the selected JWK did not explicitly specify an algorithm. This could enable JWT algorithm confusion and, in certain configurations, allow forged tokens to be accepted. As part of this fix, the JWT middleware now requires the alg option to be explicitly speci ... Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.11.4, there is a flaw in Hono’s JWK/JWKS JWT verification middleware allowed the JWT header’s alg value to influence signature verification when the selected JWK did not explicitly specify an algorithm. This could enable JWT algorithm confusion and, in certain configurations, allow forged tokens to be accepted. As part of this fix, the JWT middleware now requires the alg option to be explicitly specified. This prevents algorithm confusion by ensuring that the verification algorithm is not derived from untrusted JWT header values. This vulnerability is fixed in 4.11.4.

Show More

Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.11.4, there is a flaw in Hono’s JWK/JWKS JWT verification middleware allowed the algorithm specified in the JWT header to influence signature verification when the selected JWK did not explicitly define an algorithm. This could enable JWT algorithm confusion and, in certain configurations, allow forged tokens to be accepted. The JWK/JWKS JWT verification middleware has been updated to require an expl ... Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.11.4, there is a flaw in Hono’s JWK/JWKS JWT verification middleware allowed the algorithm specified in the JWT header to influence signature verification when the selected JWK did not explicitly define an algorithm. This could enable JWT algorithm confusion and, in certain configurations, allow forged tokens to be accepted. The JWK/JWKS JWT verification middleware has been updated to require an explicit allowlist of asymmetric algorithms when verifying tokens. The middleware no longer derives the verification algorithm from untrusted JWT header values. This vulnerability is fixed in 4.11.4.

Show More

Improper verification of intent by broadcast receiver in System UI for Galaxy Watch prior to SMR Jul-2025 Release 1 allows local attackers to power off the device.

Improper verification of cryptographic signature in Windows Admin Center allows an authorized attacker to elevate privileges locally.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW-F . An attacker can update the system firmware with a specially crafted image.