Vulnerabilities (CVE)

The recovery module has a vulnerability of bypassing the verification of an update package before use. Successful exploitation of this vulnerability may affect system stability.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Affected devices load firmware updates without checking the authenticity. Furthermore the integrity of the unencrypted firmware is only verified by a non-cryptographic method. This could allow an attacker to manipulate a firmware update and flash it to the device.

HashiCorp Boundary up to 0.10.1 did not properly perform data integrity checks to ensure the resources were associated with the correct scopes, allowing potential privilege escalation for authorized users of another scope. Fixed in Boundary 0.10.2.

immudb is a database with built-in cryptographic proof and verification. In versions prior to 1.4.1, a malicious immudb server can provide a falsified proof that will be accepted by the client SDK signing a falsified transaction replacing the genuine one. This situation can not be triggered by a genuine immudb server and requires the client to perform a specific list of verified operations resulting in acceptance of an invalid state value. This vulnerability only affects immudb client SDKs, the ... immudb is a database with built-in cryptographic proof and verification. In versions prior to 1.4.1, a malicious immudb server can provide a falsified proof that will be accepted by the client SDK signing a falsified transaction replacing the genuine one. This situation can not be triggered by a genuine immudb server and requires the client to perform a specific list of verified operations resulting in acceptance of an invalid state value. This vulnerability only affects immudb client SDKs, the immudb server itself is not affected by this vulnerability. This issue has been patched in version 1.4.1.

Show More

A firmware update vulnerability exists in the sysupgrade functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network packet can lead to arbitrary firmware update. An attacker can send a sequence of requests to trigger this vulnerability.

A CWE-345: Insufficient Verification of Data Authenticity vulnerability exists that could cause loading of unauthorized firmware images due to improper verification of the firmware signature. Affected Products: X80 advanced RTU Communication Module (BMENOR2200H) (V2.01 and later), OPC UA Modicon Communication Module (BMENUA0100) (V1.10 and prior)

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.1). The application does not perform the integrity check of the update packages. Without validation, an admin user might be tricked to install a malicious package, granting root privileges to an attacker.

An unauthenticated, remote attacker could upload malicious logic to the devices based on ProConOS/ProConOS eCLR in order to gain full control over the device.

An unauthenticated, remote attacker could upload malicious logic to devices based on ProConOS/ProConOS eCLR in order to gain full control over the device.

Due to insufficient input validation, SAP Business Objects - version 420, allows an authenticated attacker to submit a malicious request through an allowed operation. On successful exploitation, an attacker can view or modify information causing a limited impact on confidentiality and integrity of the application.

Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize ... Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize the unauthenticated Safety Builder protocol (FSCT-2022-0051) for engineering purposes, including downloading projects and control logic to the controller. Control logic is downloaded to the controller on a block-by-block basis. The logic that is downloaded consists of FLD code compiled to native machine code for the CPU module (which applies to both the Safety Manager and FSC families). Since this logic does not seem to be cryptographically authenticated, it allows an attacker capable of triggering a logic download to execute arbitrary machine code on the controller's CPU module in the context of the runtime. While the researchers could not verify this in detail, the researchers believe that the microprocessor underpinning the FSC and Safety Manager CPU modules is incapable of offering memory protection or privilege separation capabilities which would give an attacker full control of the CPU module. There is no authentication on control logic downloaded to the controller. Memory protection and privilege separation capabilities for the runtime are possibly lacking. The researchers confirmed the issues in question on Safety Manager R145.1 and R152.2 but suspect the issue affects all FSC and SM controllers and associated Safety Builder versions regardless of software or firmware revision. An attacker who can communicate with a Safety Manager controller via the Safety Builder protocol can execute arbitrary code without restrictions on the CPU module, allowing for covert manipulation of control operations and implanting capabilities similar to the TRITON malware (MITRE ATT&CK software ID S1009). A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

Show More

The Motorola MDLC protocol through 2022-05-02 mishandles message integrity. It supports three security modes: Plain, Legacy Encryption, and New Encryption. In Legacy Encryption mode, traffic is encrypted via the Tiny Encryption Algorithm (TEA) block-cipher in ECB mode. This mode of operation does not offer message integrity and offers reduced confidentiality above the block level, as demonstrated by an ECB Penguin attack against any block ciphers.

The Motorola ACE1000 RTU through 2022-05-02 mishandles firmware integrity. It utilizes either the STS software suite or ACE1000 Easy Configurator for performing firmware updates. In case of the Easy Configurator, firmware updates are performed through access to the Web UI where file system, kernel, package, bundle, or application images can be installed. Firmware updates for the Front End Processor (FEP) module are performed via access to the SSH interface (22/TCP), where a .hex file image is tr ... The Motorola ACE1000 RTU through 2022-05-02 mishandles firmware integrity. It utilizes either the STS software suite or ACE1000 Easy Configurator for performing firmware updates. In case of the Easy Configurator, firmware updates are performed through access to the Web UI where file system, kernel, package, bundle, or application images can be installed. Firmware updates for the Front End Processor (FEP) module are performed via access to the SSH interface (22/TCP), where a .hex file image is transferred and a bootloader script invoked. File system, kernel, package, and bundle updates are supplied as RPM (RPM Package Manager) files while FEP updates are supplied as S-rec files. In all cases, firmware images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular integrity checks.

Show More

Motorola ACE1000 RTUs through 2022-05-02 mishandle application integrity. They allow for custom application installation via either STS software, the C toolkit, or the ACE1000 Easy Configurator. In the case of the Easy Configurator, application images (as PLX/DAT/APP/CRC files) are uploaded via the Web UI. In case of the C toolkit, they are transferred and installed using SFTP/SSH. In each case, application images were found to have no authentication (in the form of firmware signing) and only re ... Motorola ACE1000 RTUs through 2022-05-02 mishandle application integrity. They allow for custom application installation via either STS software, the C toolkit, or the ACE1000 Easy Configurator. In the case of the Easy Configurator, application images (as PLX/DAT/APP/CRC files) are uploaded via the Web UI. In case of the C toolkit, they are transferred and installed using SFTP/SSH. In each case, application images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular integrity checks.

Show More

The Emerson ROC and FloBoss RTU product lines through 2022-05-02 perform insecure filesystem operations. They utilize the ROC protocol (4000/TCP, 5000/TCP) for communications between a master terminal and RTUs. Opcode 203 of this protocol allows a master terminal to transfer files to and from the flash filesystem and carrying out arbitrary file and directory read, write, and delete operations.

The Emerson ControlWave 'Next Generation' RTUs through 2022-05-02 mishandle firmware integrity. They utilize the BSAP-IP protocol to transmit firmware updates. Firmware updates are supplied as CAB archive files containing a binary firmware image. In all cases, firmware images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular integrity checks.

Emerson DeltaV Distributed Control System (DCS) has insufficient verification of firmware integrity (an inadequate checksum approach, and no signature). This affects versions before 14.3 of DeltaV M-series, DeltaV S-series, DeltaV P-series, DeltaV SIS, and DeltaV CIOC/EIOC/WIOC IO cards.

Emerson Electric's Proficy Machine Edition Version 9.00 and prior is vulenrable to CWE-353 Missing Support for Integrity Check, and has no authentication or authorization of data packets after establishing a connection for the SRTP protocol.

Emerson Electric's Proficy Machine Edition Version 9.00 and prior is vulnerable to CWE-345 Insufficient Verification of Data Authenticity, and can display logic that is different than the compiled logic.

A vulnerability was found in mod_wsgi. The X-Client-IP header is not removed from a request from an untrusted proxy, allowing an attacker to pass the X-Client-IP header to the target WSGI application because the condition to remove it is missing.

JTEKT TOYOPUC PLCs through 2022-04-29 do not ensure data integrity. They utilize the unauthenticated CMPLink/TCP protocol for engineering purposes, including downloading projects and control logic to the PLC. Control logic is downloaded to the PLC on a block-by-block basis with a given memory address and a blob of machine code. The logic that is downloaded to the PLC is not cryptographically authenticated, allowing an attacker to execute arbitrary machine code on the PLC's CPU module in the cont ... JTEKT TOYOPUC PLCs through 2022-04-29 do not ensure data integrity. They utilize the unauthenticated CMPLink/TCP protocol for engineering purposes, including downloading projects and control logic to the PLC. Control logic is downloaded to the PLC on a block-by-block basis with a given memory address and a blob of machine code. The logic that is downloaded to the PLC is not cryptographically authenticated, allowing an attacker to execute arbitrary machine code on the PLC's CPU module in the context of the runtime. In the case of the PC10G-CPU, and likely for other CPU modules of the TOYOPUC family, a processor without MPU or MMU is used and this no memory protection or privilege-separation capabilities are available, giving an attacker full control over the CPU.

Show More

github-action-merge-dependabot is an action that automatically approves and merges dependabot pull requests (PRs). Prior to version 3.2.0, github-action-merge-dependabot does not check if a commit created by dependabot is verified with the proper GPG key. There is just a check if the actor is set to `dependabot[bot]` to determine if the PR is a legit PR. Theoretically, an owner of a seemingly valid and legit action in the pipeline can check if the PR is created by dependabot and if their own act ... github-action-merge-dependabot is an action that automatically approves and merges dependabot pull requests (PRs). Prior to version 3.2.0, github-action-merge-dependabot does not check if a commit created by dependabot is verified with the proper GPG key. There is just a check if the actor is set to `dependabot[bot]` to determine if the PR is a legit PR. Theoretically, an owner of a seemingly valid and legit action in the pipeline can check if the PR is created by dependabot and if their own action has enough permissions to modify the PR in the pipeline. If so, they can modify the PR by adding a second seemingly valid and legit commit to the PR, as they can set arbitrarily the username and email in for commits in git. Because the bot only checks if the actor is valid, it would pass the malicious changes through and merge the PR automatically, without getting noticed by project maintainers. It would probably not be possible to determine where the malicious commit came from, as it would only say `dependabot[bot]` and the corresponding email-address. Version 3.2.0 contains a patch for this issue.

Show More

The Zoom Client for Meetings for macOS (Standard and for IT Admin) starting with version 5.7.3 and before 5.11.6 contains a vulnerability in the auto update process. A local low-privileged user could exploit this vulnerability to escalate their privileges to root.

An issue was discovered in certain Verbatim drives through 2022-03-31. Due to missing integrity checks, an attacker can manipulate the content of the emulated CD-ROM drive (containing the Windows and macOS client software). The content of this emulated CD-ROM drive is stored as an ISO-9660 image in the hidden sectors of the USB drive, that can only be accessed using special IOCTL commands, or when installing the drive in an external disk enclosure. By manipulating this ISO-9660 image or replacin ... An issue was discovered in certain Verbatim drives through 2022-03-31. Due to missing integrity checks, an attacker can manipulate the content of the emulated CD-ROM drive (containing the Windows and macOS client software). The content of this emulated CD-ROM drive is stored as an ISO-9660 image in the hidden sectors of the USB drive, that can only be accessed using special IOCTL commands, or when installing the drive in an external disk enclosure. By manipulating this ISO-9660 image or replacing it with another one, an attacker is able to store malicious software on the emulated CD-ROM drive. This software may get executed by an unsuspecting victim when using the device. For example, an attacker with temporary physical access during the supply chain could program a modified ISO-9660 image on a device that always accepts an attacker-controlled password for unlocking the device. If the attacker later on gains access to the used USB drive, he can simply decrypt all contained user data. Storing arbitrary other malicious software is also possible. This affects Executive Fingerprint Secure SSD GDMSFE01-INI3637-C VER1.1 and Fingerprint Secure Portable Hard Drive Part Number #53650.

Show More

On Verizon 5G Home LVSKIHP OutDoorUnit (ODU) 3.33.101.0 devices, the RPC endpoint crtc_fw_upgrade provides a means of provisioning a firmware update for the device. /lib/functions/wnc_jsonsh/wnc_crtc_fw.sh has no cryptographic validation of the image, thus allowing an attacker to modify the installed firmware.

Remote desktop takeover via phishing

PAX A930 device with PayDroid_7.1.1_Virgo_V04.3.26T1_20210419 can allow a root privileged attacker to install unsigned packages. The attacker must have shell access to the device and gain root privileges in order to exploit this vulnerability.

Authorized users may install a maliciously modified package file when updating the device via the web user interface. The user may inadvertently use a package file obtained from an unauthorized source or a file that was compromised between download and deployment.

An insufficient verification of data authenticity vulnerability [CWE-345] in FortiClient, FortiMail and FortiOS AV engines version 6.2.168 and below and version 6.4.274 and below may allow an attacker to bypass the AV engine via manipulating MIME attachment with junk and pad characters in base64.

In JetBrains Hub before 2022.1.14434, SAML request takeover was possible.

Nextcloud Server is the file server software for Nextcloud, a self-hosted productivity platform. Prior to versions 21.0.8, 22.2.4, and 23.0.1, it is possible to trick administrators into enabling "recommended" apps for the Nextcloud server that they do not need, thus expanding their attack surface unnecessarily. This issue is fixed in versions 21.0.8 , 22.2.4, and 23.0.1.

CodeIgniter is a PHP full-stack web framework. This vulnerability may allow attackers to spoof their IP address when the server is behind a reverse proxy. This issue has been patched, please upgrade to version 4.2.11 or later, and configure `Config\App::$proxyIPs`. As a workaround, do not use `$request->getIPAddress()`.

A remote code execution vulnerability was discovered on Western Digital My Cloud devices where an attacker could trick a NAS device into loading through an unsecured HTTP call. This was a result insufficient verification of calls to the device. The vulnerability was addressed by disabling checks for internet connectivity using HTTP.

Select Dell Client Commercial and Consumer platforms are vulnerable to an insufficient verification of data authenticity vulnerability. An authenticated malicious user may exploit this vulnerability in order to install modified BIOS firmware.

A vulnerability in the packaging of Cisco Adaptive Security Device Manager (ASDM) images and the validation of those images by Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker with administrative privileges to upload an ASDM image that contains malicious code to a device that is running Cisco ASA Software. This vulnerability is due to insufficient validation of the authenticity of an ASDM image during its installation on a device that is running Cisc ... A vulnerability in the packaging of Cisco Adaptive Security Device Manager (ASDM) images and the validation of those images by Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker with administrative privileges to upload an ASDM image that contains malicious code to a device that is running Cisco ASA Software. This vulnerability is due to insufficient validation of the authenticity of an ASDM image during its installation on a device that is running Cisco ASA Software. An attacker could exploit this vulnerability by installing a crafted ASDM image on the device that is running Cisco ASA Software and then waiting for a targeted user to access that device using ASDM. A successful exploit could allow the attacker to execute arbitrary code on the machine of the targeted user with the privileges of that user on that machine. Notes: To successfully exploit this vulnerability, the attacker must have administrative privileges on the device that is running Cisco ASA Software. Potential targets are limited to users who manage the same device that is running Cisco ASA Software using ASDM. Cisco has released and will release software updates that address this vulnerability.

Show More

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending ... A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully.

Show More

A vulnerability in the web-based management interface of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web-based interface of an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of ... A vulnerability in the web-based management interface of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web-based interface of an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform configuration changes on the affected device, resulting in a denial of service (DoS) condition.

Show More

In SettingsActivity.java, there is a possible way to make a device discoverable over Bluetooth, without permission or user interaction, due to a permissions bypass. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12L Android-13Android ID: A-234440688

A CWE-287: Improper Authentication vulnerability exists that could cause an attacker to arbitrarily change the behavior of the UPS when a key is leaked and used to upload malicious firmware. Affected Product: APC Smart-UPS Family: SMT Series (SMT Series ID=18: UPS 09.8 and prior / SMT Series ID=1040: UPS 01.2 and prior / SMT Series ID=1031: UPS 03.1 and prior), SMC Series (SMC Series ID=1005: UPS 14.1 and prior / SMC Series ID=1007: UPS 11.0 and prior / SMC Series ID=1041: UPS 01.1 and prior), S ... A CWE-287: Improper Authentication vulnerability exists that could cause an attacker to arbitrarily change the behavior of the UPS when a key is leaked and used to upload malicious firmware. Affected Product: APC Smart-UPS Family: SMT Series (SMT Series ID=18: UPS 09.8 and prior / SMT Series ID=1040: UPS 01.2 and prior / SMT Series ID=1031: UPS 03.1 and prior), SMC Series (SMC Series ID=1005: UPS 14.1 and prior / SMC Series ID=1007: UPS 11.0 and prior / SMC Series ID=1041: UPS 01.1 and prior), SCL Series (SCL Series ID=1030: UPS 02.5 and prior / SCL Series ID=1036: UPS 02.5 and prior), SMX Series (SMX Series ID=20: UPS 10.2 and prior / SMX Series ID=23: UPS 07.0 and prior), SRT Series (SRT Series ID=1010/1019/1025: UPS 08.3 and prior / SRT Series ID=1024: UPS 01.0 and prior / SRT Series ID=1020: UPS 10.4 and prior / SRT Series ID=1021: UPS 12.2 and prior / SRT Series ID=1001/1013: UPS 05.1 and prior / SRT Series ID=1002/1014: UPSa05.2 and prior), APC SmartConnect Family: SMT Series (SMT Series ID=1015: UPS 04.5 and prior), SMC Series (SMC Series ID=1018: UPS 04.2 and prior), SMTL Series (SMTL Series ID=1026: UPS 02.9 and prior), SCL Series (SCL Series ID=1029: UPS 02.5 and prior / SCL Series ID=1030: UPS 02.5 and prior / SCL Series ID=1036: UPS 02.5 and prior / SCL Series ID=1037: UPS 03.1 and prior), SMX Series (SMX Series ID=1031: UPS 03.1 and prior)

Show More

A local privilege escalation (PE) vulnerability in the Palo Alto Networks Cortex XSOAR engine software running on a Linux operating system allows a local attacker with shell access to the engine to execute programs with elevated privileges.