Vulnerabilities (CVE)

Bluetooth firmware or operating system software drivers in macOS versions before 10.13, High Sierra and iOS versions before 11.4, and Android versions before the 2018-06-05 patch may not sufficiently validate elliptic curve parameters used to generate public keys during a Diffie-Hellman key exchange, which may allow a remote attacker to obtain the encryption key used by the device.

Weak configuration may lead to cryptographic issue when a VoWiFi call is triggered from UE.

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and ... Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.

Show More

Deno is a JavaScript, TypeScript, and WebAssembly runtime. Before 2.6.0, node:crypto doesn't finalize cipher. The vulnerability allows an attacker to have infinite encryptions. This can lead to naive attempts at brute forcing, as well as more refined attacks with the goal to learn the server secrets. This vulnerability is fixed in 2.6.0.

Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.

Missing cryptographic step in Windows Kerberos allows an unauthorized attacker to elevate privileges over a network.

The Bastion provides authentication, authorization, traceability and auditability for SSH accesses. Session-recording ttyrec files, may be handled by the provided osh-encrypt-rsync script that is a helper to rotate, encrypt, sign, copy, and optionally move them to a remote storage periodically, if configured to. When running, the script properly rotates and encrypts the files using the provided GPG key(s), but silently fails to sign them, even if asked to.

ZF FROST is a Rust implementation of FROST (Flexible Round-Optimised Schnorr Threshold signatures). In versions 2.0.0 through 2.1.0, refresh shares with smaller min_signers will reduce security of group. The inability to change min_signers (i.e. the threshold) with the refresh share functionality (frost_core::keys::refresh module) was not made clear to users. Using a smaller value would not decrease the threshold, and attempts to sign using a smaller threshold would fail. Additionally, after ref ... ZF FROST is a Rust implementation of FROST (Flexible Round-Optimised Schnorr Threshold signatures). In versions 2.0.0 through 2.1.0, refresh shares with smaller min_signers will reduce security of group. The inability to change min_signers (i.e. the threshold) with the refresh share functionality (frost_core::keys::refresh module) was not made clear to users. Using a smaller value would not decrease the threshold, and attempts to sign using a smaller threshold would fail. Additionally, after refreshing the shares with a smaller threshold, it would still be possible to sign with the original threshold, potentially causing a security loss to the participant's shares. This issue is fixed in version 2.2.0.

Show More

A vulnerability in pairing process of Cisco&nbsp;TelePresence CE Software and RoomOS Software for Cisco&nbsp;Touch 10 Devices could allow an unauthenticated, remote attacker to impersonate a legitimate device and pair with an affected device. This vulnerability is due to insufficient identity verification. An attacker could exploit this vulnerability by impersonating a legitimate device and responding to the pairing broadcast from an affected device. A successful exploit could allow the attacke ... A vulnerability in pairing process of Cisco&nbsp;TelePresence CE Software and RoomOS Software for Cisco&nbsp;Touch 10 Devices could allow an unauthenticated, remote attacker to impersonate a legitimate device and pair with an affected device. This vulnerability is due to insufficient identity verification. An attacker could exploit this vulnerability by impersonating a legitimate device and responding to the pairing broadcast from an affected device. A successful exploit could allow the attacker to access the affected device while impersonating a legitimate device.There are no workarounds that address this vulnerability.

Show More

In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_verify may accept invalid signatures if hash computation fails and internal errors go unchecked, enabling LMS (Leighton-Micali Signature) forgery in a fault scenario. Specifically, unchecked return values in mbedtls_lms_verify allow an attacker (who can induce a hardware hash accelerator fault) to bypass LMS signature verification by reusing stale stack data, resulting in acceptance of an invalid signature. In mbedtls_lms_verify, the return values of th ... In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_verify may accept invalid signatures if hash computation fails and internal errors go unchecked, enabling LMS (Leighton-Micali Signature) forgery in a fault scenario. Specifically, unchecked return values in mbedtls_lms_verify allow an attacker (who can induce a hardware hash accelerator fault) to bypass LMS signature verification by reusing stale stack data, resulting in acceptance of an invalid signature. In mbedtls_lms_verify, the return values of the internal Merkle tree functions create_merkle_leaf_value and create_merkle_internal_value are not checked. These functions return an integer that indicates whether the call succeeded or not. If a failure occurs, the output buffer (Tc_candidate_root_node) may remain uninitialized, and the result of the signature verification is unpredictable. When the software implementation of SHA-256 is used, these functions will not fail. However, with hardware-accelerated hashing, an attacker could use fault injection against the accelerator to bypass verification.

Show More

RLPx 5 has two CTR streams based on the same key, IV, and nonce. This can facilitate decryption on a private network.

Missing Cryptographic Step vulnerability in Tridium Niagara Framework on Windows, Linux, QNX, Tridium Niagara Enterprise Security on Windows, Linux, QNX allows Cryptanalysis. This issue affects Niagara Framework: before 4.14.2, before 4.15.1, before 4.10.11; Niagara Enterprise Security: before 4.14.2, before 4.15.1, before 4.10.11. Tridium recommends upgrading to Niagara Framework and Enterprise Security versions 4.14.2u2, 4.15.u1, or 4.10u.11.

A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The e ... A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Show More

Besu Native contains scripts and tooling that is used to build and package the native libraries used by the Ethereum client Hyperledger Besu. Besu 24.7.1 through 25.2.2, corresponding to besu-native versions 0.9.0 through 1.2.1, have a potential consensus bug for the precompiles ALTBN128_ADD (0x06), ALTBN128_MUL (0x07), and ALTBN128_PAIRING (0x08). These precompiles were reimplemented in besu-native using gnark-crypto's bn254 implementation, as the former implementation used a library which was ... Besu Native contains scripts and tooling that is used to build and package the native libraries used by the Ethereum client Hyperledger Besu. Besu 24.7.1 through 25.2.2, corresponding to besu-native versions 0.9.0 through 1.2.1, have a potential consensus bug for the precompiles ALTBN128_ADD (0x06), ALTBN128_MUL (0x07), and ALTBN128_PAIRING (0x08). These precompiles were reimplemented in besu-native using gnark-crypto's bn254 implementation, as the former implementation used a library which was no longer maintained and not sufficiently performant. The new gnark implementation was initially added in version 0.9.0 of besu-native but was not utilized by Besu until version 0.9.2 in Besu 24.7.1. The issue is that there are EC points which may be crafted which are in the correct subgroup but are not on the curve and the besu-native gnark implementation was relying on subgroup checks to perform point-on-curve checks as well. The version of gnark-crypto used at the time did not do this check when performing subgroup checks. The result is that it was possible for Besu to give an incorrect result and fall out of consensus when executing one of these precompiles against a specially crafted input point. Additionally, homogenous Besu-only networks can potentially enshrine invalid state which would be incorrect and difficult to process with patched versions of besu which handle these calls correctly. The underlying defect has been patched in besu-native release 1.3.0. The fixed version of Besu is version 25.3.0. As a workaround for versions of Besu with the problem, the native precompile for altbn128 may be disabled in favor of the pure-java implementation. The pure java implementation is significantly slower, but does not have this consensus issue.

Show More

Certain General Electric Renewable Energy products have inadequate encryption strength. This affects iNET and iNET II before 8.3.0.

sigstore-python is a Python tool for generating and verifying Sigstore signatures. Versions of sigstore-python newer than 2.0.0 but prior to 3.6.0 perform insufficient validation of the "integration time" present in "v2" and "v3" bundles during the verification flow: the "integration time" is verified *if* a source of signed time (such as an inclusion promise) is present, but is otherwise trusted if no source of signed time is present. This does not affect "v1" bundles, as the "v1" bundle format ... sigstore-python is a Python tool for generating and verifying Sigstore signatures. Versions of sigstore-python newer than 2.0.0 but prior to 3.6.0 perform insufficient validation of the "integration time" present in "v2" and "v3" bundles during the verification flow: the "integration time" is verified *if* a source of signed time (such as an inclusion promise) is present, but is otherwise trusted if no source of signed time is present. This does not affect "v1" bundles, as the "v1" bundle format always requires an inclusion promise. Sigstore uses signed time to support verification of signatures made against short-lived signing keys. The impact and severity of this weakness is *low*, as Sigstore contains multiple other enforcing components that prevent an attacker who modifies the integration timestamp within a bundle from impersonating a valid signature. In particular, an attacker who modifies the integration timestamp can induce a Denial of Service, but in no different manner than already possible with bundle access (e.g. modifying the signature itself such that it fails to verify). Separately, an attacker could upload a *new* entry to the transparency service, and substitute their new entry's time. However, this would still be rejected at validation time, as the new entry's (valid) signed time would be outside the validity window of the original signing certificate and would nonetheless render the attacker auditable.

Show More

NATS.io is a high performance open source pub-sub distributed communication technology, built for the cloud, on-premise, IoT, and edge computing. The cryptographic key handling library, nkeys, recently gained support for encryption, not just for signing/authentication. This is used in nats-server 2.10 (Sep 2023) and newer for authentication callouts. In nkeys versions 0.4.0 through 0.4.5, corresponding with NATS server versions 2.10.0 through 2.10.3, the nkeys library's `xkeys` encryption handli ... NATS.io is a high performance open source pub-sub distributed communication technology, built for the cloud, on-premise, IoT, and edge computing. The cryptographic key handling library, nkeys, recently gained support for encryption, not just for signing/authentication. This is used in nats-server 2.10 (Sep 2023) and newer for authentication callouts. In nkeys versions 0.4.0 through 0.4.5, corresponding with NATS server versions 2.10.0 through 2.10.3, the nkeys library's `xkeys` encryption handling logic mistakenly passed an array by value into an internal function, where the function mutated that buffer to populate the encryption key to use. As a result, all encryption was actually to an all-zeros key. This affects encryption only, not signing. FIXME: FILL IN IMPACT ON NATS-SERVER AUTH CALLOUT SECURITY. nkeys Go library 0.4.6, corresponding with NATS Server 2.10.4, has a patch for this issue. No known workarounds are available. For any application handling auth callouts in Go, if using the nkeys library, update the dependency, recompile and deploy that in lockstep.

Show More

uthenticode is a small cross-platform library for partially verifying Authenticode digital signatures. Versions of uthenticode prior to the 2.x series did not check Extended Key Usages in certificates, in violation of the Authenticode X.509 certificate profile. As a result, a malicious user could produce a "signed" PE file that uthenticode would verify and consider valid using an X.509 certificate that isn't entitled to produce code signatures (e.g., a SSL certificate). By design, uthenticode do ... uthenticode is a small cross-platform library for partially verifying Authenticode digital signatures. Versions of uthenticode prior to the 2.x series did not check Extended Key Usages in certificates, in violation of the Authenticode X.509 certificate profile. As a result, a malicious user could produce a "signed" PE file that uthenticode would verify and consider valid using an X.509 certificate that isn't entitled to produce code signatures (e.g., a SSL certificate). By design, uthenticode does not perform full-chain validation. However, the absence of EKU validation was an unintended oversight. The 2.0.0 release series includes EKU checks. There are no workarounds to this vulnerability.

Show More

Cryptographic issues with In-Meeting Chat for some Zoom clients may allow a privileged user to conduct an information disclosure via network access.

Exposure of information intended to be encrypted by some Zoom clients may lead to disclosure of sensitive information.

AMI SPx contains a vulnerability in the BMC where a user may cause a missing cryptographic step by generating a hash-based message authentication code (HMAC). A successful exploit of this vulnerability may lead to the loss confidentiality, integrity, and authentication.

Nextcloud is an open-source productivity platform. In Nextcloud Desktop client 3.0.0 until 3.8.0, Nextcloud Android app 3.13.0 until 3.25.0, and Nextcloud iOS app 3.0.5 until 4.8.0, a malicious server administrator can gain full access to an end-to-end encrypted folder. They can decrypt files, recover the folder structure and add new files.​ This issue is fixed in Nextcloud Desktop 3.8.0, Nextcloud Android 3.25.0, and Nextcloud iOS 4.8.0. No known workarounds are available.

The Nextcloud Desktop Client is a tool to synchronize files from Nextcloud Server. Starting with version 3.0.0 and prior to version 3.6.5, a malicious server administrator can gain full access to an end-to-end encrypted folder. They can decrypt files, recover the folder structure, and add new files.​ Users should upgrade the Nextcloud Desktop client to 3.6.5 to receive a patch. No known workarounds are available.

Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.

CaSS is a Competency and Skills System. CaSS Library, (npm:cassproject) has a missing cryptographic step when storing cryptographic keys that can allow a server administrator access to an account’s cryptographic keys. This affects CaSS servers using standalone username/password authentication, which uses a method that expects e2e cryptographic security of authorization credentials. The issue has been patched in 1.5.8, however, the vulnerable accounts are only resecured when the user next logs in ... CaSS is a Competency and Skills System. CaSS Library, (npm:cassproject) has a missing cryptographic step when storing cryptographic keys that can allow a server administrator access to an account’s cryptographic keys. This affects CaSS servers using standalone username/password authentication, which uses a method that expects e2e cryptographic security of authorization credentials. The issue has been patched in 1.5.8, however, the vulnerable accounts are only resecured when the user next logs in using standalone authentication, as the data required to resecure the account is not available to the server. The issue may be mitigated by using SSO or client side certificates to log in. Please note that SSO and client side certificate authentication does not have this expectation of no-knowledge credential access, and cryptographic keys are available to the server administrator.

Show More

A vulnerability in an IPsec VPN library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to read or modify data within an IPsec IKEv2 VPN tunnel. This vulnerability is due to an improper implementation of Galois/Counter Mode (GCM) ciphers. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting a sufficient number of encrypted messages across an affected IPsec ... A vulnerability in an IPsec VPN library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to read or modify data within an IPsec IKEv2 VPN tunnel. This vulnerability is due to an improper implementation of Galois/Counter Mode (GCM) ciphers. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting a sufficient number of encrypted messages across an affected IPsec IKEv2 VPN tunnel and then using cryptanalytic techniques to break the encryption. A successful exploit could allow the attacker to decrypt, read, modify, and re-encrypt data that is transmitted across an affected IPsec IKEv2 VPN tunnel.

Show More

A vulnerability in the encryption implementation of EBICS messages in the open source librairy ebics-java/ebics-java-client allows an attacker sniffing network traffic to decrypt EBICS payloads. This issue affects: ebics-java/ebics-java-client versions prior to 1.2.

showdoc is vulnerable to Missing Cryptographic Step

A Protection Mechanism Failure vulnerability in the J-Web HTTP service of Juniper Networks Junos OS allows a remote unauthenticated attacker to perform Person-in-the-Middle (PitM) attacks against the device. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S20; 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 ... A Protection Mechanism Failure vulnerability in the J-Web HTTP service of Juniper Networks Junos OS allows a remote unauthenticated attacker to perform Person-in-the-Middle (PitM) attacks against the device. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S20; 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2.

Show More

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possi ... A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.

Show More

Python oic is a Python OpenID Connect implementation. In Python oic before version 1.2.1, there are several related cryptographic issues affecting client implementations that use the library. The issues are: 1) The IdToken signature algorithm was not checked automatically, but only if the expected algorithm was passed in as a kwarg. 2) JWA `none` algorithm was allowed in all flows. 3) oic.consumer.Consumer.parse_authz returns an unverified IdToken. The verification of the token was left to the d ... Python oic is a Python OpenID Connect implementation. In Python oic before version 1.2.1, there are several related cryptographic issues affecting client implementations that use the library. The issues are: 1) The IdToken signature algorithm was not checked automatically, but only if the expected algorithm was passed in as a kwarg. 2) JWA `none` algorithm was allowed in all flows. 3) oic.consumer.Consumer.parse_authz returns an unverified IdToken. The verification of the token was left to the discretion of the implementator. 4) iat claim was not checked for sanity (i.e. it could be in the future). These issues are patched in version 1.2.1.

Show More

In TYPO3 CMS greater than or equal to 9.0.0 and less than 9.5.20, and greater than or equal to 10.0.0 and less than 10.4.6, it has been discovered that an internal verification mechanism can be used to generate arbitrary checksums. This allows to inject arbitrary data having a valid cryptographic message authentication code (HMAC-SHA1) and can lead to various attack chains including potential privilege escalation, insecure deserialization & remote code execution. The overall severity of this vul ... In TYPO3 CMS greater than or equal to 9.0.0 and less than 9.5.20, and greater than or equal to 10.0.0 and less than 10.4.6, it has been discovered that an internal verification mechanism can be used to generate arbitrary checksums. This allows to inject arbitrary data having a valid cryptographic message authentication code (HMAC-SHA1) and can lead to various attack chains including potential privilege escalation, insecure deserialization & remote code execution. The overall severity of this vulnerability is high based on mentioned attack chains and the requirement of having a valid backend user session (authenticated). This has been patched in versions 9.5.20 and 10.4.6.

Show More

In TYPO3 installations with the "mediace" extension from version 7.6.2 and before version 7.6.5, it has been discovered that an internal verification mechanism can be used to generate arbitrary checksums. The allows to inject arbitrary data having a valid cryptographic message authentication code and can lead to remote code execution. To successfully exploit this vulnerability, an attacker must have access to at least one `Extbase` plugin or module action in a TYPO3 installation. This is fixed i ... In TYPO3 installations with the "mediace" extension from version 7.6.2 and before version 7.6.5, it has been discovered that an internal verification mechanism can be used to generate arbitrary checksums. The allows to inject arbitrary data having a valid cryptographic message authentication code and can lead to remote code execution. To successfully exploit this vulnerability, an attacker must have access to at least one `Extbase` plugin or module action in a TYPO3 installation. This is fixed in version 7.6.5 of the "mediace" extension for TYPO3.

Show More

A flaw was found in QEMU in the implementation of the Pointer Authentication (PAuth) support for ARM introduced in version 4.0 and fixed in version 5.0.0. A general failure of the signature generation process caused every PAuth-enforced pointer to be signed with the same signature. A local attacker could obtain the signature of a protected pointer and abuse this flaw to bypass PAuth protection for all programs running on QEMU.

RSA BSAFE Crypto-J versions prior to 6.2.5 are vulnerable to a Missing Required Cryptographic Step vulnerability. A malicious remote attacker could potentially exploit this vulnerability to coerce two parties into computing the same predictable shared key.

Jenkins before versions 2.44, 2.32.2 is vulnerable to a user data leak in disconnected agents' config.xml API. This could leak sensitive data such as API tokens (SECURITY-362).

In jenkins before versions 2.44, 2.32.2 node monitor data could be viewed by low privilege users via the remote API. These included system configuration and runtime information of these nodes (SECURITY-343).

Jenkins before versions 2.44, 2.32.2 uses AES ECB block cipher mode without IV for encrypting secrets which makes Jenkins and the stored secrets vulnerable to unnecessary risks (SECURITY-304).

nss before version 3.30 is vulnerable to a remote denial of service during the session handshake when using SessionTicket extension and ECDHE-ECDSA.

Windows Kerberos Information Disclosure Vulnerability